| 1 | 1 | Taking down chowkats or frame with shutter (without taking off shutters from frame) area not exceeding 1.5 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and directed by Engr-in-Charge. | | 125 | Each |
|---|
| 2 | 2 | All as per ser item No 01 here in before above but area exceeding 1.5 sqm and not exceeding 4.00 sqm each complete all as specified and directed. | | 50 | Each |
|---|
| 3 | 3 | Taking down shutters of any description exceeding 1 square metre not exceeding 2 square metre each complete all as specified and directed. | | 100 | Per leaf |
|---|
| 4 | 4 | Taking down shutters of any description not exceeding 1 square metre each complete all as specified and directed. | | 50 | Per leaf |
|---|
| 5 | 5 | Factory made 35 mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified and directed by Engr-in-Charge. | | 150 | Sqm |
|---|
| 6 | 6 | 35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and directed. | | 100 | Sqm |
|---|
| 7 | 7 | PVC moulded door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing all as directed complete all as specified and directed. | | 350 | RM |
|---|
| 8 | 8 | Factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed. | | 150 | Sqm |
|---|
| 9 | 9 | Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all specified.\nNote : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3\n ii) MS fillets, glazing, wire gauge shall be measured and paid separately. | | 60 | Sqm |
|---|
| 10 | 10 | All as per Item 09 here in before above but wire gauge shutters complete all as specified and directed. | | 60 | Sqm |
|---|
| 11 | 11 | Steel Ventilators with top hung/side hung shutter including hinges steel peg stay, including one shop coat of red oxide primer , complete all as specified and directed . | | 25 | Sqm |
|---|
| 12 | 12 | Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed . | | 270 | Each |
|---|
| 13 | 13 | 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed. | | 300 | Each |
|---|
| 14 | 14 | 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. | | 380 | Each |
|---|
| 15 | 15 | 150 mm length aluminium handles fabricated type anodised complete all as specified and directed. | | 380 | Each |
|---|
| 16 | 16 | Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in Each pane up to G+2 height bldg complete all as specified and directed. | | 50 | Sqm |
|---|
| 17 | 17 | Sheet glass 3 mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane complete all as specified and directed. | | 5 | Sqm |
|---|
| 18 | 18 | Hacking out old broken glass from metal frame, including cleaning and removing old putty clip etc and S&F of sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in Each pane complete all as specified and directed. | | 150 | Sqm |
|---|
| 19 | 19 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks complete fixed as in repair all as specified and directed. | | 150 | Sqm |
|---|
| 20 | 20 | 100 mm long aluminium alloy handles, fabricated type, anodised (ISI Marked) fixed in repair all as approved and complete all as specified and directed by Engr-in-Charge. | | 125 | Each |
|---|
| 21 | 21 | 105 x 60 mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified and directed. | | 200 | RM |
|---|
| 22 | 22 | Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work confirming to Fe 290 Gde E-165 fixed as in repair complete all as specified and directed. | | 1000 | Kg |
|---|
| 23 | 23 | Preparation of per primed new steel surfaces of anny description over 10 cm width and girth and applying two coats of synthetic enamel. Paint over a coat of red oxide zinc chrome primer complete all as specified and directed. \n | | 60 | Sqm |
|---|
| 24 | 24 | Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. | | 50 | Sqm |
|---|
| 25 | 25 | Preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primers complete all as specified and directed. | | 500 | Sqm |
|---|
| 26 | 26 | 300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. | | 50 | Each |
|---|
| 27 | 27 | 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed. | | 50 | Each |
|---|
| 28 | 28 | Floor door stoper (140 mm length) of aluminium alloy body complete all as specified and directed. | | 250 | Each |
|---|
| 29 | 29 | Door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body, fixed as in repair complete all as specified and directed. | | 60 | Each |
|---|
| 30 | 30 | Taking down aluminium door/window shutters form frame repair to shutter and frame and making good and serviciable and refixing to existing frame including fixing to rubber gasket, handle and similar items etc, complete all as specified and directed. | | 250 | Each |
|---|
| 31 | 31 | Powder coated 50 micron anodized aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed. | | 150 | Sqm |
|---|
| 32 | 32 | Powder coated 50 micron anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. | | 100 | Sqm |
|---|
| 33 | 33 | Powder coated 50 micron anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100 mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. | | 10 | Sqm |
|---|
| 34 | 34 | Prelaminated particle board of 18/19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc fixed as in repair complete all as specified and directed. | | 80 | Sqm |
|---|
| 35 | 35 | 18/19 mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work/iron frame work (Termite treated/water proof) (Make:Green Ply/Kit ply) fixed as in repair complete all as specified and directed. | | 20 | Sqm |
|---|
| 36 | 36 | 2nd class HW plain fillets squre ,rectangular or triangular in section clean sawn ,secured with nails or brads exc 3 sq cm but n exc 6 sqcm. complete all as specified and directed. | | 100 | RM |
|---|
| 37 | 37 | 0.9 mm thick decorative choice of lamination type-1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and directed. | | 40 | Sqm |
|---|
| 38 | 38 | Hasp and staple 100 mm size aluminium anodised fixed with screws complete all as specified and directed. | | 25 | Each |
|---|
| 39 | 39 | Continous (Piano) hinges, mild steel, bright finished or electrogalvanised width of flaps in 30 mm complete all as specified and directed. | | 50 | RM |
|---|
| 40 | 40 | 40 mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed. | | 36 | Each |
|---|
| 41 | 41 | Stain less steel catcher of superior quality fixed as in repair complete all as specified and directed by Engr-in-Charge. | | 36 | Pair |
|---|
| 42 | 42 | 50 mm stain less steel pivoted type hinges of superior quality fixed as in repair complete all as specified and directed by Engr-in-Charge. | | 50 | Each |
|---|
| 43 | 43 | Steel rolling shutters 1.25 mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed. | | 6 | Sqm |
|---|
| 44 | 44 | Brass mortice lock, vertical type, size 100 mm, 4 leaver complete all as specified and directed. | | 50 | Each |
|---|
| 45 | 45 | Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete fixed as in repair all as specified and directed. | | 12 | Each |
|---|
| 46 | 46 | Water closet wall mounted pattern pattern colour 535 x 380 x 400 mm (as approved by Engr-in-Charge) complete fixed as in repair all as specified and directed. Make : CERA, Cat Part No (S1041109 P trap), Seat cover B1510108 Clair seat cover or equivalent | | 6 | Each |
|---|
| 47 | 47 | WHB coloured 550 mm x 480 mm with Pedestal fixed as in repair as approved and complete all as specified and directed by Engr-in-Charge. Make : CERA Cat Part No (S2040115 & S2090111) or equivalent. | | 6 | Each |
|---|
| 48 | 48 | 15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON 167KNB and equvalent in CERA/Prayag. | | 12 | Each |
|---|
| 49 | 49 | 15 mm bore long body Bib tap fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON-037KN and equvalent in CERA/PRAYAG. | | 120 | Each |
|---|
| 50 | 50 | 15 mm bore Bib tap fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON 107KN and equvalent in CERA/PRAYAG. | | 75 | Each |
|---|
| 51 | 51 | 15 mm bore angular stop cock with wall flange fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : CON- 059KN and equvalent in CERA/PRAYAG. | | 25 | Each |
|---|
| 52 | 52 | Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe fixed as in repair complete all as specified and directed. Make : CERA Cat Part No : F8030103 and equvalent in CERA. | | 50 | Each |
|---|
| 53 | 53 | Chromium plated toilet paper holder fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1153N and equvalent in CERA/PRAYAG. | | 25 | Each |
|---|
| 54 | 54 | Glass shelf with chromium plated guard rails fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN-1171N and equvalent in CERA/PRAYAG. | | 24 | Each |
|---|
| 55 | 55 | 600 mm long brass chromium plated towel rail fancy type fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN-1111NM and equvalent in CERA/ PRAYAG. | | 10 | Each |
|---|
| 56 | 56 | Soap dish fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1131N and equvalent in CERA/ PRAYAG. | | 25 | Each |
|---|
| 57 | 57 | Towel rack fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1181FN and equvalent in CERA/ PRAYAG. | | 6 | Each |
|---|
| 58 | 58 | Double Coat hook fixed as in repair complete all as specified and directed. Make : Jaquar, Cat Part No : ACN 1161N and equvalent in CERA/PRAYAG. | | 5 | Each |
|---|
| 59 | 59 | Looking mirror 5 mm thick with bevelled edge with and including four SS spacers of selected quality size as required at site requirement, complete fixed as in repair all as specified and directed. | | 10 | Sqm |
|---|
| 60 | 60 | Rotational moulded polyethylene water storage tanks 500 ltrs (cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantaling of existing damaged water tanks complete fixed as in repir all as specified and directed. | | 10 | Each |
|---|
| 61 | 61 | Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantaling of existing damaged water tanks complete fixed as in repair all as specified and directed.. | | 15 | Each |
|---|
| 62 | 62 | PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes (Minimum weight 210 gms) and fixed to iron pipes complete all as specified and directed. | | 25 | Each |
|---|
| 63 | 63 | PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and dhgh denscity plastic ball screwed for iron pipes (Minimum weight 210 gms)and fixed to iron pipes complete fixed as in repair all as specified and directed. | | 250 | Each |
|---|
| 64 | 64 | Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete fixed as in repair all as specified and directed. | | 10 | Each |
|---|
| 65 | 65 | Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 15 mm bore including taking down old pipe complete fixed as in repair all as specified and directed. | | 20 | RM |
|---|
| 66 | 66 | Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20 mm bore including taking down old pipe complete fixed as in repair all as specified and directed. | | 30 | RM |
|---|
| 67 | 67 | 40 mm waste coupling of PTMT (half or full threaded) (Minimum weight 60 gms) complete fixed as in repair all as specified and directed. | | 40 | Each |
|---|
| 68 | 68 | 40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete fixed as in repair all as specified and directed. | | 300 | Each |
|---|
| 69 | 69 | PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement including removing old trap and making good complete fixed as in repair all as specified and directed by Engr-in-Charge. | | 5 | Each |
|---|
| 70 | 70 | PVC connection 15 mm dia and 45 cm long with two Nos of PTMT checknuts and washers complete fixed as in repair all as specified and directed. | | 300 | Each |
|---|
| 71 | 71 | PVC bathroom cabinet mirror 450 x 350 mm with door fitted with looking mirror complete fixed as in repair all as specified and directed. | | 10 | Each |
|---|
| 72 | 72 | Vitreous china squatting pan, Orrisa pattern of size 580 mm x 440 mm white with integral foot rests excluding flushihng cistertn and flush pipe complete fixed as in repair all as specified and directed. | | 12 | Each |
|---|
| 73 | 73 | Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc complete fixed as in repair all as specified and directed. | | 6 | Each |
|---|
| 74 | 74 | WHB vitreous china (flat back or angle back type) any size, including cutting for pinning in ends size 550 x 400 mm including brackets, 32 mm CP waste fittings coupling, connection pipe 450 mm long and 15 mm dia CP piller taps fancy type complete fixed as in repair all as specified and directed. | | 5 | Each |
|---|
| 75 | 75 | 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete fixed as in repair all as specified and directed. | | 25 | Each |
|---|
| 76 | 76 | Vitreous china bowl urinal flat back, size 465 x 355 x 265 mm white (min) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete fixed as in repair all as specified and directed. | | 5 | Each |
|---|
| 77 | 77 | Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device any type of EWC complete fixed as in repair all as specified and directed. | | 10 | Each |
|---|
| 78 | 78 | Pillar tap 15 mm bore cast copper alloy with capstan head, chromium plated screwed down high presure with or with out lettered fixed with iron pipe fixed as in repair complete all as specified and directed. | | 30 | Each |
|---|
| 79 | 79 | Stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15 mm bore complete fixed as in repair all as specified and directed. | | 50 | Each |
|---|
| 80 | 80 | Bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15 mm fixed complete fixed as in repair all as specified and directed. | | 125 | Each |
|---|
| 81 | 81 | CP bib taps disc fitting face half turn or full turn suitable for bib taps and similar work complete fixed as in repair all as specified and directed. | | 150 | Each |
|---|
| 82 | 82 | 20 mm dia mild steel powder coated tubular curtain rail with brackets complete fixed as in repair all as specified and directed. | | 250 | RM |
|---|
| 83 | 83 | PVC water tank cover 500 ltr to 1000 ltrs approval quality complete fixed as in repair all as specified and directed. | | 100 | Each |
|---|
| 84 | 84 | Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards/slabs /blankets any thickness, including cover fillets complete all as specified and directed. | | 320 | Sqm |
|---|
| 85 | 85 | Providing false ceiling GI frame work for seamless ceiling comprising of GI perimerter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or sutable hanging from soffits/trusses/bracking supporting hanger compressing of GI wire complete all as specified and directed. | | 300 | Sqm |
|---|
| 86 | 86 | 4 mm thick 600 x 600 mm size asbestos cement plain E-boards designer ceiling (Make; Everest or equvalent), fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as specified and directed. | | 350 | Sqm |
|---|
| 87 | 87 | 10-12 mm thick gypsum boards seemess false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, complete all as specified and as directed by Engr-in-Charge.\nNote : (a) Design of ceiling board as approved by Engr-in-Charge.\n(b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer. | | 20.9 | Sqm |
|---|
| 88 | 88 | Dismantling of AC sheets (corrugated and semicorrugated etc) in roofing including ridge tiles complete all as specified and directed. | | 150 | Sqm |
|---|
| 89 | 89 | Pre-painted galvatume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed. | | 150 | Sqm |
|---|
| 90 | 90 | Dismantling timber scantlings 40 sqcm and over in section, in any position and in unframed work complete all as specified and directed. | | 1 | Cum |
|---|
| 91 | 91 | Rolled Mild steel sections as in frame work for fire point structure with hook, main and cross beams hip and jack rafters, purlines fixed independently and similar work including welding complete all as specified and directed by Engr-in-Charge. | | 500 | Kg |
|---|
| 92 | 92 | Flat iron wind ties including securing bolts etc complete all as specified and directed. | | 10 | Kg |
|---|
| 93 | 93 | Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. | | 30 | Sqm |
|---|
| 94 | 94 | 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed. | | 20 | Sqm |
|---|
| 95 | 95 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10 mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Minimum weight of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & including two coats of bituminous Aluminium paint complete all as specified and directed by Engr-in- Charge. | | 200 | Sqm |
|---|
| 96 | 96 | Supply only integral water proofing compound of approved quality, ISI marked complete all as specified and directed. | | 150 | Kg |
|---|
| 97 | 97 | PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in PCC filling in MS chowkhat & base of water tank on roof surface complete all as specified and directed. | | 1.2 | Cum |
|---|
| 98 | 98 | Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness below and above ground level complete all as specified and directed. | | 16.25 | Cum |
|---|
| 99 | 99 | 75 mm thick PCC 1:4:8 type B-2 (using 40 mm graded aggregate) as in sub base of floor etc complete all as specified and directed. | | 150 | Sqm |
|---|
| 100 | 100 | 25 mm thick PCC 1:2:4 type B-1 (using 12.50 mm graded aggregate) as in level course on floor etc complete all as specified and directed. | | 325 | Sqm |
|---|
| 101 | 101 | 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and directed. | | 325 | Sqm |
|---|
| 102 | 102 | Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 70 | Sqm |
|---|
| 103 | 103 | Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 100 | Sqm |
|---|
| 104 | 104 | All as per ser item No 103 here in before above but in vertical surfaces such as skirting/dado etc. complete all as specified and directed. | | 2 | Sqm |
|---|
| 105 | 105 | Vitrified (Double charge) tiles, area of each tile not exceeding 0.36 sqm, 10 mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed. | | 75 | Sqm |
|---|
| 106 | 106 | All as per ser item No 105 here in before above but in vertical surfaces such as skirting/dado etc. complete all as specified and directed. | | 20 | Sqm |
|---|
| 107 | 107 | Vitrified coloured heavy duty (Dura stone) 300 x 300 x 10 mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 80 | Sqm |
|---|
| 108 | 108 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed. \nMake: Saint Gobain or its equivalent. | | 175 | Sqm |
|---|
| 109 | 109 | Rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and directed. | | 175 | Sqm |
|---|
| 110 | 110 | Glazed ceramic coloured tiles of size 300 x 200 mm x 7 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. | | 100 | Sqm |
|---|
| 111 | 111 | Glazed ceramic coloured tiles of size 600 x 300 x 7-8 mm wall tiles set and jointed in neat cement and in white/coloured cement to match with the colour of tile etc. complete all as specified and directed | | 50 | Sqm |
|---|
| 112 | 112 | 20 mm thick granite (of any type) machine cut as in dado etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing complete all as specified and directed by Engr-in-Charge. | | 25 | Sqm |
|---|
| 113 | 113 | 50 mm thick PCC type B-1 1:2:4 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. | | 150 | Sqm |
|---|
| 114 | 114 | Demolition of brick work or stone masonry built in cement mortar or cement line mortar including all quoins, arches pillars etc. complete all as specified and directed. | | 20 | Cum |
|---|
| 115 | 115 | Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:6 complete all as specified and directed. | | 20 | Cum |
|---|
| 116 | 116 | Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water up to G+2 height bldg built in cement mortar complete all as specified and directed. | | 115 | Cum |
|---|
| 117 | 117 | Rendering 15 mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement up to G+2 height bldg complete all as specified and directed. | | 150 | Sqm |
|---|
| 118 | 118 | Rendering 5 mm thick in CM 1:3 on fair faces of concrete as in ceiling surfaces even and smooth without using extra cement complete all as specified and directed. | | 15 | Sqm |
|---|
| 119 | 119 | Preparation of new plaster surface of walls and applying two coats of oil bound distempers over one coat of primer and two coat of wall care putty complete all as specified and directed. | | 150 | Sqm |
|---|
| 120 | 120 | Preparation of new plastered or un-plastered surfaces and applying three coats of white wash on ceiling, chajja complete all as specified and directed. | | 15 | Sqm |
|---|
| 121 | 121 | Spot welding as in steel work such as window, door, ventilater, gate and santry post and similar work with running welding including greasing and oiling complete fixed as repair all as specified and directed | | 250 | Each |
|---|
| 122 | 122 | Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed. | | 7.3 | Cum |
|---|
| 123 | 123 | Precast cement concrete louvres and jallies 45-50 mm thick set in cement mortar 1:6 type B-0 (1:2:4) (using 12.5 mm graded aggregate) etc sample as approved and complete all as specified and directed by GE including taking out old precast jali. | | 85 | Sqm |
|---|
| 124 | 124 | Precast cement concrete jallies size 300 mm x 300 mm x 25-30 mm thick set in cement mortar 1:4 type B-0 (1:2:4) (using 12.5 mm graded aggregate) etc fixed between precast pillars size 75 mm x 75 mm x 300 mm height, sample as approved complete all as specified and directed by Engr-In-Charge by GE including taking out old precast jali. | | 100 | RM |
|---|
| 125 | 125 | Precast cement concrete jallies size 300 mm x 450 mm x 25-30 mm thick set in cement mortar 1:4 type B-0 (1:2:4) (using 12.5 mm graded aggregate) etc fixed between precast pillars size 75 mm x 75 mm x 450 mm height, sample as approved complete all as specified and directed by Engr-In-Charge by GE including taking out old precast jali. | | 100 | RM |
|---|
| 126 | 126 | Precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) for drain cover and other covers etc including necessary form work and set in CM (1:4) complete all as specified and directed Note:- reinforcement will be measured and paid seperately. | | 0.8 | Cum |
|---|
| 127 | 127 | Mild TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends and including mild steel wire not less than 0.9 mm dia or securing with clips quality conforming to, TMT bars complete all as specified and directed. | | 45 | Kg |
|---|
