Sales : +91-777 804 8217
| Name of Work: REPAIRS TO TOILET, KITCHEN, SANITARY FITTINGS, JOINERY, SEWAGE LINE, WATER SUPPLY, INTERNAL AND EXTERNAL ELECTRIFICATION AT CERTAIN PBOR MD ACCN OF ASC BN AT BAIRAGARH UNDER GE BHOPAL | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement or cement lime plaster, any description, on brick or stone walls, ceilings, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 900 | Sqm | |
| 2 | 2 | M&L for rendering 20mm thick in two coats of 10mm thick each on faces of brick work or concrete surfaces; first coat (rendering coat) in cement mortar 1: 6 and second coat (finishing coat) in cement mortar 1: 4 mixed with water proofing compound (water proofing compound to be measured separately as supply only) and finished fair and even complete all as specified and directed. | 600 | Sqm | |
| 3 | 3 | Preparing new plastered or unplastered surfaces of wall and M&L for applying two coats of exterior acrylic emulsion paint, white or tinted over and including a coat of exterior wall primer on plastered surfaces complete all as specified and directed. [Make :Shalimar(Saktiman) / Asian(ACE) / Burger(wall masta)] | 600 | Sqm | |
| 4 | 4 | M&L for rendering 15mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 200 | Sqm | |
| 5 | 5 | Preparing new plastered or unplastered surfaces of wall and M&L for applying two coats of distemper oil emulsion, white or tinted over and including a coat of primer over a coat of wall care putty where required complete all as specified and directed.\nNote: Putty shall be measured and paid separately under respective item. | 200 | Sqm | |
| 6 | 6 | M&L for applying 3mm thick wall care putty (Make: Birla/JK) complete all as specified and directed. | 200 | Sqm | |
| 7 | 7 | M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete all as specified and directed. | 100 | Sqm | |
| 8 | 8 | M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of oil bound distemper over a coat of putty where required, complete all as specified and as directed. \nNote : putty shall be measured and paid separately. | 100 | Sqm | |
| 9 | 9 | M&L for cleaning & drying thoroughly existing surface of walls, roofs, chajjas, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting; applying two coats of polymer modified cementations based protective & water proofing coating as per manufacturers instruction complete all as specified and directed. [MAKE: ACROCOAT / FOSROC or equivalent as approved by GE] | 120 | Sqm | |
| 10 | 10 | Demolition of brickwork/stone masonry built in cement or cement lime mortar complete all as specified and directed. | 3 | Cum | |
| 11 | 11 | M&L for Brick work with fly ash bricks (Modular size), straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. | 1 | Cum | |
| 12 | 12 | M&L for brick work with fly ash bricks straight or curved on plan any radius in half brick thick walls, built in CM 1:4 all as specified and directed. | 20 | Sqm | |
| 13 | 13 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid bedded and pointed in any mortar complete all as specified and directed. | 138 | 10 Sqm | |
| 14 | 14 | M/L for 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate in floor and rough finished surface to receive floor finishes, complete all as specified and directed | 780 | Sqm | |
| 15 | 15 | M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. \n[MAKE: SOMANY/KAJARIA/ORIENT] | 700 | Sqm | |
| 16 | 16 | M&L for Non skid ceramic coloured tiles 7mm to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. \n[MAKE: SOMANY/KAJARIA/ORIENT] | 80 | Sqm | |
| 17 | 17 | M&L for 75 mm thick PCC 1:2:4 type B-2, using 40 mm graded stone aggregate in floor and rough finished surface to receive floor finishes, complete all as specified and directed | 200 | Sqm | |
| 18 | 18 | M&L for heavy duty flooring tiles, harsh weather & UV Resistance, high abrasion resistance, MOH Hardness >6, thickness 10 mm thick, area of each tile not less than 0.09 sqm, anti slip type, laid in floors, steps, edges, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tile with & including 15mm thick rendering in CM 1:4 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ORIENT/JOHNSON] | 200 | Sqm | |
| 19 | 19 | M&L for Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick or 450mm x 350mm x 7mm thick, in vertical surfaces such as skirting, dados and risers to steps, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with & including 10mm thick rendering in CM 1:3 complete all as specified and directed. [MAKE: SOMANY/ KAJARIA/ ORIENT/ JOHNSON] | 360 | Sqm | |
| 20 | 20 | M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, moulding and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. | 40 | Sqm | |
| 21 | 21 | Taking up or down steel tubing and connections 15 mm bore, including cleaning (tubings only and not connections) for refixing complete all as specified and directed. | 120 | RM | |
| 22 | 22 | S&F Steel water tubes, medium grade, ISI marked, galvanised 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. . | 120 | RM | |
| 23 | 23 | Taking up or down steel tubing and connections 20 mm bore, including cleaning (tubings only and not connections) for refixing complete all as specified and directed. | 200 | RM | |
| 24 | 24 | S&F Steel water tubes, medium grade, ISI marked, galvanised 20mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. . | 200 | RM | |
| 25 | 25 | Taking up or down steel tubing and connections 25 mm bore, including cleaning (tubings only and not connections) for refixing complete all as specified and directed. | 170 | RM | |
| 26 | 26 | S&F Steel water tubes, medium grade, ISI marked, galvanised 25mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed. . | 170 | RM | |
| 27 | 27 | S&F in repairs vitreous china wash basin,white flat back size 550X400mm including waste coupling, waste pipe and brackets fixing in position complete all as specified and directed | 25 | Each | |
| 28 | 28 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8602) or equivalent in JAGUAR/MARC as approve by GE] | 25 | Each | |
| 29 | 29 | S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore (minimum weight 90 gms) complete all as specified and directed. | 60 | Each | |
| 30 | 30 | S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8606) or equivalent in JAGUAR/MARC as approved by GE] | 60 | Each | |
| 31 | 31 | S&F in repairs 15 mm bore stop cock (angle valve), cast copper alloy, chromium plated fancy type, high pressure with crutch butterfly handle, screwed for iron pipe or union and fixed complete all as specified and directed.\n[MAKE:- Prayag/ JAGUAR/MARC as approved by GE] | 80 | Each | |
| 32 | 32 | S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed. [MAKE:- Prayag (Cat No.8618) or equivalent in JAGUAR/MARC as approved by GE] | 25 | Each | |
| 33 | 33 | S&F in repairs brass chromium plated shower rose 125 mm size with swivel joints complete all as specified and directed. [MAKE:- Prayag (Cat No.BS-73) or equivalent in JAGUAR/CERA as approve by GE] | 25 | Each | |
| 34 | 34 | S&F in repair waste coupling 40mm suitable size for kitchen sink of PTMT (half or full threaded) complete all as specified and directed | 25 | Each | |
| 35 | 35 | S&Fin repair 40mm bore PVC waste pipe for kitchen sink one mtr long complete all as specified and directed. | 25 | Each | |
| 36 | 36 | S&F in repair 32mm bore PVC waste pipe for wash basin one mtr long complete all as specified and directed. | 25 | Each | |
| 37 | 37 | S&F in repair 100mm dia CP grating (Minimum weight 25 gms) all as specified and directed. | 60 | Each | |
| 38 | 38 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. | 50 | Each | |
| 39 | 39 | S&F in repairs Vitreous china squatting pan ‘Orissa’ pattern, size 580 x 440 mm, white with integral foot rests including provision of cement concrete bedding & ‘P’ or ‘S’ trap complete all as specified and directed. [MAKE:-SOMANY (Cat.No.121115) or equivalent in CERA /PARRYWARE/ HINDWARE as approved by GE.] | 25 | Each | |
| 40 | 40 | S&F in repairs vitreous china wash down water closet pan, pedestal pattern, ISI marked, white, including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. [MAKE:-SOMANY (Cat No.120403 & 120404) or equivalent in CERA/PARRYWARE /HINDWARE as approved by GE.] | 2 | Each | |
| 41 | 41 | S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete all as specified and directed. [MAKE:- Prayag (Cat No.501 Smart flush cistern) or equivalent in PARRYWARE-SLIMLINE/CERA as approved by GE] | 25 | Each | |
| 42 | 42 | S&F in repairs Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 450 x 600 mm size mounted on 2 mm thick PVC sheet and fixed to PVC frame (select quality) all round complete all as specified and directed. [MAKE:- Prayag (Cat No.BLM-01 F) or equivalent in JAGUAR/CERA as approve by GE] | 25 | Each | |
| 43 | 43 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 110 mm bore complete all as specified and directed. | 45 | RM | |
| 44 | 44 | S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls, 75 mm bore complete all as specified and directed. | 30 | RM | |
| 45 | 45 | S&F PVC (SWR) junction single (single T), equal or unequal, 110mm bore complete all as specified and directed. | 10 | Each | |
| 46 | 46 | S&F PVC (SWR) bends any radius, 110 mm bore complete all as specified and directed. | 10 | Each | |
| 47 | 47 | S&F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed. . | 10 | Each | |
| 48 | 48 | S&F PVC (SWR) floor/Nahani trap, plain with CP grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed. \n | 10 | Each | |
| 49 | 49 | S&F in repairs tubular towel rail of aluminium anodised, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. [MAKE:- Prayag (Cat No.BA-40) or equivalent in JAQUAR/MARC as approved by GE] | 25 | Each | |
| 50 | 50 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and directed. | 40 | Sqm | |
| 51 | 51 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed. | 30 | Sqm | |
| 52 | 52 | S&F Figured glass, pin head type 3mm thick and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified and directed. | 10 | Sqm | |
| 53 | 53 | M&L for Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed. | 100 | Sqm | |
| 54 | 54 | Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. | 51 | Cum | |
| 55 | 55 | M&L for water proofing treatment to sunken surfaces of slab in following sequence complete :- (a) Slope correction providing PCC 1:1.5:3 using 12.5mm graded stone aggregate, average thickness 25mm, mixed graded styone aggregate, average thickness 25mm, mixed with integral water proffing compound \"DITCHTMENT DM' manufactured by Dr fixit Pidiproof LW + of M/s Pidilite Industries or STP No 1 (Liquid) of M/S STP Ltd as approved by GE, in proportions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer confirming to IS 3384 @ 0.7 Kg per Sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5kg/sqm on the primer surfaces. (d) Laying 150 micron thick black polythence film on the suface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot bown of grade 85/25 @ 1.5 kg per sqm on the surfaces. (f) 48 hrs testing of treatment for water tightness by ponding of water. | 20 | Sqm | |
| 56 | 56 | M&L for 50 mm dia UPVC pipe as in water spout at the lowest point of sunken floor with 600 mm projection beyond the outer face of the wall with outer end cut in chamfered angle for easy drain of water complete all as specified and as directed. | 10 | RM | |
| 57 | 57 | M & L for Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggregate) mixed with water proofing compound @3% by wt of cement in benching, roof kerbs of mud stops, rounded or chamfered on edges,cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing (Note :- Water Proofing compound shall be measured and paid seperately) | 4 | Cum | |
| 58 | 58 | Taking down existing old roof treatment of any description , any type including removal old Tar felt, screed bed and plastering etc complete all as specified and directed. | 780 | Sqm | |
| 59 | 59 | M&L for Water proofing treatment on roof surfaces with APP modified membrane with non woven polyester reinforced, weight not less than 3 KG/SQM and thickness of membrane not less than 3mm laid in following sequence complete all as specified and directed.:-\n(a) Applying 10mm thick plaster in CM 1:4 mixed with water proofing compound [Make; Dr.Fixit Pidiproof LW+ of M/s Pidilite Industries or STP No. 1 (liquid) of M/s STP Ltd] @ 3% by weight of cement on cleaned roof surface. After properly curing of the plaster, the roof will be tested for water tightening by ponding with water for seven days for any seepage/leakages, etc. If any seepage/leakage is observed the rectification will be carried out by pressure grouting under pressure of 5 Kg/sqcm using cement based grout. After the roof surface is repaired, the slab /roof will be again tested for water tightness before proceeding for further treatment.\n(b) Properly cleaning and drying of the plastered roof surfaces, parapets, gutters, drain mouths, etc for all foreign matters such as fungus, moss, dust, etc by wire brushing and dusting. Proper grooves shall be cut around CI drain outlets/pipes/chimney pipes and other similar situations to tuck in the treatment.\n(c) Applying a coat of bituminous primer conforming to IS: 3384-1965 @ 0.3Kg/Sqm on the prepared surface till the surface is properly impregnated.\n(d) Laying APP modified water proofing membrane with 100mm overlap in longitudinal direction and 100mm overlap in transverse direction sealed and bounded to the surface by torch application method.\n(e) All joints and changes in direction should be curved with cement mortar 1:3 with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. A fillet of PCC 1:2:4 type B0 using 12.5mm graded stone aggregates shall be provided at all junctions of vertical and horizontal surfaces and wherever there is change of direction. \n | 780 | Sqm | |
| 60 | 60 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 20 | Cum | |
| 61 | 61 | M&L Providing Cement concrete Type B1, 1:2:4 (20mm graded aggregate) as in roof padding, kerbs or mud stops, copings and levelling concrete slightly rounded or chamfered angles and throating, complete all as specified and directed. | 20 | Cum | |
| 62 | 62 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortor 1:3, complete all as specified and directed. | 50 | RM | |
| 63 | 63 | M&L for Chequered cement concrete tiles with grey cement and no pigments 200mm x 200mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with & including 15mm thick screed bed in CM 1:6 complete all as specified and directed. | 300 | Sqm | |
| 64 | 64 | Removing loose concrete from chajjas, perapets, fascias, pillars, columns etc not exc 1 sqm on plan and repairing the same with cement mortar 1:3 /cement concrete type B-0 ,1:2:4 (12.5mm graded aggregate, including white washing/ditempering/ weather proof paint / cement base paint as per existing surface complete all as specified and as directed | 40 | Each \nJob | |
| 65 | 65 | Dismantling mild steel work of any description not other wise provided for complete all as specified and directed | 2 | Qtl | |
| 66 | 66 | S&F Mild steel conforming to Fe-290 Gde E-165 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and directed. | 200 | Kg | |
| 67 | 67 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. | 30 | Sqm | |
| 68 | 68 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet, 0.5mm thickness, of colour as approved by GE, having tensile strength of 550 Mpa as in roof coverings/cladding to wall, etc, fixed with & including self tapping screws on angle frame complete all as specified and directed. \n[MAKE: TATA BLUE SCOPE / EVEREST INDUSTRIES/JINDAL]\n | 30 | Sqm | |
| 69 | 69 | Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. | 40 | Each | |
| 70 | 70 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed. | 20 | Each | |
| 71 | 71 | Taking down shutters of any description n.exc 1.0 sqm each complete all as specified and directed | 5 | Leaf | |
| 72 | 72 | S&F factory made steel windows with side hung shutters including box type hinges with steel handle, and peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. | 10.8 | Sqm | |
| 73 | 73 | S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, without glazing bars complete all as specified and directed. | 10.8 | Sqm | |
| 74 | 74 | S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed. | 5.4 | Sqm | |
| 75 | 75 | S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. | 49 | RM | |
| 76 | 76 | S&F Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed. | 30 | RM | |
| 77 | 77 | S&F Pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, with & including filing of cement concrete typ B-0, 1:2:4 using 12.5mm graded stone aggregates inside frames complete all as specified and directed. | 20 | RM | |
| 78 | 78 | M&L for Second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. | 0.7 | Cum | |
| 79 | 79 | S&F factory made Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneers with lipping/frame to match complete all as specified and directed. | 21.6 | Sqm | |
| 80 | 80 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. | 13 | Sqm | |
| 81 | 81 | S&F factory made Flush shutters 40mm thick, solid core construction, with block board core and plywood face panels, both face covered with decorative face veneers with lipping/frame to match complete all as specified and directed. | 10 | Sqm | |
| 82 | 82 | M&L for factory made second class hardwood glazed and skeleton door shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. | 6.7 | Sqm | |
| 83 | 83 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. | 5 | Sqm | |
| 84 | 84 | M&L for factory made Second class hardwood glazed and skeleton window shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed. | 2.5 | Sqm | |
| 85 | 85 | S&F in repairs Aluminium handles, cast type anodised, 100 mm size complete all as specified and directed. | 90 | Each | |
| 86 | 86 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section, 100 mm long complete all as specified and directed. | 30 | Each | |
| 87 | 87 | S&F 75 mm mild steel butt hinges medium weight,cold rolled complete all as specified and directed | 20 | Each | |
| 88 | 88 | S&F in repairs Aluminium handles, cast type anodised, 150 mm size complete all as specified and directed. | 60 | Each | |
| 89 | 89 | S&F in repairs Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed. | 60 | Each | |
| 90 | 90 | S&F in repairs Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. | 10 | Each | |
| 91 | 91 | S&F 100 mm but hinges, galvanised mild steel hinge pin, anodised and fixed type B-21 complete all as specified. | 30 | Each | |
| 92 | 92 | S&F 100 mm but hinges, meduim weight, cold rolled mild steel and fixed complete all as specified. | 90 | Each | |
| 93 | 93 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 150mm complete all as specified and directed. | 10 | Each | |
| 94 | 94 | M&L for Preparing new or previously untreated surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed. | 20 | Sqm | |
| 95 | 95 | M&L for Preparing new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and directed. | 10 | Sqm | |
| 96 | 96 | M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. | 30 | Sqm | |
| 97 | 97 | M&L for preparation of old or previously treated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamel paint complete all as specified and directed. | 15 | Sqm | |
| 98 | 98 | Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed. | 214 | Cum | |
| 99 | 99 | Demolition and breaking up drain pipes 100mm bore (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed. | 115 | RM | |
| 100 | 100 | Demolition and breaking up drain pipes 150mm bore (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed. | 80 | RM | |
| 101 | 101 | Demolition and breaking up drain pipes 200mm bore (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed. | 40 | RM | |
| 102 | 102 | Demolition and breaking up drain pipes 300mm bore (SGSW, AC, RCC or PVC) , set in cement mortar and disposal of unservicable materials and rubbish to a distance not exceeding 100m complete all as specified and directed. | 50 | RM | |
| 103 | 103 | M&L for Concrete bed to drain pipes 100 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed. | 115 | RM | |
| 104 | 104 | M&L for Concrete bed to drain pipes 150 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed. | 80 | RM | |
| 105 | 105 | M&L for Concrete bed to drain pipes 200 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed. | 40 | RM | |
| 106 | 106 | M&L for Concrete bed to drain pipes 300 mm bore including packing under and completely surrounding pipes with concrete after they are laid and tasted; in cement concrete 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and directed. | 50 | RM | |
| 107 | 107 | S&F Salt glazed stoneware drain pipes 100 mm bore, grade ‘A’, laid in trenches and jointed as specified complete all as specified and directed. | 120 | RM | |
| 108 | 108 | S&F Salt glazed stoneware drain pipes 150 mm bore, grade ‘A’, laid in trenches and jointed as specified complete all as specified and directed. | 90 | RM | |
| 109 | 109 | S&F reinforced concrete pipes, class NP2, 200 mm bore, laid and jointed with collars complete all as specified and directed. | 45 | RM | |
| 110 | 110 | S&F reinforced concrete pipes, class NP2, 300 mm bore, laid and jointed with collars complete all as specified and directed. | 55 | RM | |
| 111 | 111 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed. | 93.8 | Cum | |
| 112 | 112 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed. | 120.2 | Cum | |
| 113 | 113 | S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. | 170 | Kg | |
| 114 | 114 | M&L for Salt-glazed stoneware gully traps, square or round mouthed, tvpe 'P', size of gully trap 150x150mm all as specified and directed | 10 | Each | |
| 115 | 115 | M&L for Providing precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed. \n(Note:-Reinforcement to be measured separately). | 2 | Cum | |
| 116 | 116 | Taking down carefully existing point wiring (any type viz. aluminum or copper) with wooden batten/surface PVC conduit (with its fittings)/PVC casing-capping or any other type for light, fan, power point (including switch, socket, ceiling rose, etc.) and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete all as specified and directed. | 219 | Per point | |
| 117 | 117 | M&L for point wiring for one light / fan / bell point with 1.50 sqmm (nominal area) FRLS PVC insulated, unsheathed, multi-stranded copper conductor cable, 1100 volts grade, controlled by one one-way switch, drawn in and including non metallic rigid PVC casing capping/PVC Conduit not less than 25mm base size with all fitting and fixing accessories including one run of 1.5 sqmm copper conductor as earth continuity wire connected to common earth dolly by suitable lugs, sunken sheet steel terminal box made out of 1.20 mm thick GI/MS sheet for mounting of fittings like switches, sockets, fan regulators, etc. with 3mm thick laminated hylum sheet cover complete all as specified and directed. \n[Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE]\nNote : Wiring to be done as per approved colour code in IE rule. | 195 | Per point | |
| 118 | 118 | All as per BOQ item No. 117.00 above, but for 3 pin 5 Amp socket outlet on independent board complete all as specified and directed. | 48 | Per point | |
| 119 | 119 | All as per BOQ item No. 117.00 above, but for 3 pin 5 Amp socket outlet on same board complete all as specified and directed. | 24 | Per point | |
| 120 | 120 | All as per BOQ item No. 117.00 above, but wiring with 2.5 Sq mm copper cable for 5/15 amp switch socket combination on or 3 pin socket out let 15 amp independent board and provision of 2 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. | 24 | Per point | |
| 121 | 121 | All as per BOQ item No. 117.00 above, but wiring with 4 Sq mm copper cable for 5/15 amp switch socket combination on or 3 pin socket out let 15 amp independent board and provision of 4 Sqmm, FRLS insulated multi-stranded single core earth wire for earth continuity, connected to common earth dolly complete all as specified and directed. | 12 | Per point | |
| 122 | 122 | All as per BOQ item No. 117.00 above, but for one light point controlled by two 2 way switches complete all as specified and directed. | 19 | Per point | |
| 123 | 123 | S&F in repairs Switch piano, flush type, single pole, one way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 240 | Each | |
| 124 | 124 | S&F in repairs Ceiling rose surface bakelite, three terminals, 240V, 50Hz, ISI marked complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 123 | Each | |
| 125 | 125 | S&F in repairs lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings with & including LED lamp white 9 watt retrofit, 230 volts complete all as specified and directed. \n[MAKE FOR HOLDER:-ANCHOR (PENTA PC series)/ LEADER/ CRABTREE/ LEGRAND /HAVELLS as approved by GE] & LAMP : BAJAJ/PHILIPS/SYSKA] | 48 | Each | |
| 126 | 126 | S&F ceiling fan regulator electronic step type 240 V, AC 50 Hz single pole, 100 watts flush type, ISI marked complete all as specified and as directed. \n[MAKE:-ANCHOR/LEADER/CONA as approved by GE] | 38 | Each | |
| 127 | 127 | S&F switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type, 230 volt AC complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 72 | Each | |
| 128 | 128 | S&F in repairs switch socket combination outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, piano flush type, 230 volt AC complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 24 | Each | |
| 129 | 129 | S&F Switch piano, flush type, single pole, one way, 15 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 24 | Each | |
| 130 | 130 | S&F in repairs Buzzer, electric, single phase, 240 volt, AC complete all as specified and as directed.\n [MAKE:-ANCHOR (PENTA PC series) or equivalent in LEADER/ CRABTREE/ LEGRAND /HAVELLS as approved by GE] | 12 | Each | |
| 131 | 131 | S&F Bell push, flush type, 6 Amp piano type, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. \n[MAKE:-ANCHOR (PENTA PC series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 12 | Each | |
| 132 | 132 | S&F in repairs Switch piano, flush type, single pole, two way, 6 Amps, 240 volt, 50Hz, AC, ISI marked complete all as specified and as directed. [MAKE:-ANCHOR (PENTA series) or equivalent in LEADER/ CRABTREE/ LEGRAND/ HAVELLS as approved by GE] | 24 | Each | |
| 133 | 133 | Taking down unserviceable sub main wiring including service connections, of any size and any description including conduit pipe and making good disturbed surface of wall/ceiling to match with existing surface after necessary rewiring complete all as specified and directed. | 600 | RM | |
| 134 | 134 | M&L for sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core PVC insulated FRLS cable 1100V unsheathed with stranded copper conductor of 4.0 sqmm nominal cross section area and drawing into rigid non metallic PVC conduit, ISI marked, medium grade, inclusive of all fittings such as tees, bends, junction boxes, elbows, saddles, pipe hooks, couples, lock outs, etc. 20mm external diameter and PVC insulated stranded copper conductor of 4 sqmm nominal cross section area as earth wire including taking down old unserviceable sub main wiring complete all as specified and directed. \n[Make of Cable : Polycab/ Plaza/ Havells/KEI/V-MARC as approved by GE]\nNote: - Two runs of 4.0 sqmm cable, one run of 4.0 sqmm cable of earth continuity conductor & PVC conduit pipe shall be measured as one unit length.\n | 600 | RM | |
| 135 | 135 | S&F LED 20/21 Watt tube light fitting (T8 type) , including LED retrofit tube 20/21 W , 240 v, PF > 0.90, colour Temp 6500 K, System Luminious efficacy > 100Lm/W, complete with powder coated CRCA decorative box type batten suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour, 2 Nos for mounting of fitting including taking down old light fitting any type complete all as specified & directed. \nMake :-CG /wipro/Havells/ Philips as approved by GE. | 36 | Each | |
| 136 | 136 | Taking down existing u/s fitting any type any size and S&F LED 9/10 Watt mirror tube light fitting intergated type, 240 v, PF > 0.90, colour Temp 6500 K, suitable for surface mounting on wall, complete fitting including connecting with PVC insulated multistranded copper flexible cable 0.5 sqmm two core, and PVC round block white colour x 2 Nos for mounting of fitting complete all as specified & directed. \nMake :-C&S /n Wipro/ Philips/ Crompton as approved by GE. | 12 | Each | |
| 137 | 137 | S&F building security light fitting made up of pressure die cast aluminium housing with high effcient LED as lighting source and PC over having top opening seperate driver compartment with IP-66 protection and impact resistance of IK07 including suitable galvanized iron pipe “light grade” brackets 1 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed. \n( Make Havells Cat No ENDURAPEARLSL20WLED757SASYTOPCMP/Bajaj /Surya) | 12 | Each | |
| 138 | 138 | Supply & fixing verticle storage water heater (Geyser), 240V, AC, Single phase, 50 Hz of 25 ltrs capacity, with heating element of 2.0 KW, stainless steel tank, 5 star rating, with indicator lamps for thermostat operation, with max rated pressure 8 bar, fixing to wall by means of dash fashner of min 80 mm long ( Vertical wall mounting), including S&F, connecting with cold and hot water pipe lines, heavy grade, of size 15 mm x 450 mm length with rubber washer , making complete connection and testing of geyser for its staisfactory functioning. Make of Geyser: Bajaj, Model : Shakti 25 L GPV cat No. 150747 or equivelent in Racold (Model No. Altro 2 25 V/H) / Havells. | 12 | Each | |
| 139 | 139 | Taking down old unserviceable MCB DB of any size and capacity including wooden boards complete all as specified and directed. | 18 | Each | |
| 140 | 140 | S&F factory made epoxy powder coated Distribution Board TP & N 4 ways (VTPN MCCB DB) and space for MCCB as In comer, with metal door ( IP-43 protection ) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 100 Amp copper bus bar for each phase, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including taking down old unsv VTPN DB complete all as specified and as directed. \nNote:- MCCB shall be measured and paid separately. \n[MAKE: L&T/ Siemens/ Legrand/HAVELLS as approved by GE]\n\n | 6 | Each | |
| 141 | 141 | S&F sheet metal enclosure for MCB, DB, SPN, 240 Volts, 200 amps rated busbar, 12 way Double door enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, including wooden rectangle board of first quality of suitable size for mounting of DB box complete all as specified and directed.\nMake- Legrand/ Seimens/ Schinder. | 12 | Each | |
| 142 | 142 | Supply and fixing of RCBO 30 mA 40 Amps SPN complete all as specified and dirested by Engr-in-charge. | 12 | Each | |
| 143 | 143 | S&F MCB SP, 240 volts, 10 KA breaking capacity, 'C' curve, of capacity 5 to 30 amps complete all as specified and directed. \n[MAKE:Hegar (L&T)/ Siemens/ Legrand/HAVELLS as approved by GE] | 96 | Each | |
| 144 | 144 | S & F Ceiling fan AC single phase 230/240 V of size 1200 mm sweep incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. \nMake-CG/Bajaj/Havells | 12 | Each | |
| 145 | 145 | S&F exhaust fan 300 mm sweep, metal body, complete with louvers incl all civil work like cutting and making circular opening in existing wall of kitchen etc. incl connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified & directed. \n Make-CG/Bajaj/Havells | 12 | Each | |
| 146 | 146 | Taking out old meter and Supply and Fixing only single phase KWH meter with LCD display 10-40 Amp with box in existing position by providing wooden board first quality of size 250 mm x 300 mm, including making complete electric connections all as specifed and directed.\nNote: Old meter to be deposite in AGE E/M store. | 12 | Each | |
| 147 | 147 | M&L for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR-2009 Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe and watering pipe shall be 20mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.\nNOTE :-\n(i) The concrete pit shall be PCC (1:3:6) type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.\n(ii) The unit rate includes the cost of GI pipe medium grade for protection of earth wire and 4mm dia earh lead wire upto 7.5 M. \n(iii) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself.\n | 12 | Each | |
| 148 | 148 | Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to end or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed. | 1200 | RM | |
| 149 | 149 | M&L for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection (8 cm below cable & 15 cm above cable) complete all as specified and directed. [Note:-Compacted/punned thickness shall be measured & paid] | 16.2 | Cum | |
| 150 | 150 | Supplying and laying sub class 'B' bricks (modular) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable complete all as specified and directed | 34.02 | Per 1000 Nos | |
| 151 | 151 | Supply and Laying XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 35x4 sqmm, laid in trenches/floor or fixed on wall/pole including takng down old unservicable cable complete all as specified and directed. | 200 | RM | |
| 152 | 152 | S&F 40mm GI tubing light grade with all fittings as required for passing through cables under floors, along the wall or along the pole, etc with suitable size M.S.flat iron clamps incl nut,bolt and washer including taking down old rusted pipe complete all as specified and directed. | 80 | RM | |
| 153 | 153 | S&F Gun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed :- [MAKE:-SANT / LEADER / RAMCO / ZOLOTO as approved by GE] | 12 | Each | |
| 154 | 154 | S&F Gun metal globe or gate valves, 25 mm bore, with iron wheel head, screwed both ends for iron pipe for the following bores including taking out old unserviceable valve complete all as specified and directed :- [MAKE:-SANT / LEADER / RAMCO / ZOLOTO as approved by GE] | 12 | Each | |
| 155 | 155 | S&F Rotational moulded (three layered), polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes including taking down old tank any type complete all as specified and directed. \n[MAKE:-SINTEX / POLYWELL / ROTAX/ JS POLYPLAST / POLYCON as approved by GE] \n | 12 | Each | |
| 156 | 156 | S&F in repairs Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (minimum weight 210 gms) complete all as specified and directed. [MAKE:-PRAYAG / POLYTUFF as approved by GE] | 12 | Each | |
| 157 | 157 | Deduct schedule of credit (calculation will be done off line) Rs. 54968.00 \n |
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail