Providing Lis To Village Khurik In Gp Khurik In Tahsil Kaza Distt L And S Hp Sh Co P House And Attendant Quarter Co Sump Well Co Toilet With P House And Boundary Wall Around The P House And Sump Well

Tender Notice

25824901
Providing Lis To Village Khurik In Gp Khurik In Tahsil Kaza Distt L And S Hp Sh Co P House And Attendant Quarter Co Sump Well Co Toilet With P House And Boundary Wall Around The P House And Sump Well
Indian
Himachal Pradesh
24-10-2020
29-10-2020
30-10-2020

Tender Details

Providing Lis To Village Khurik In Gp Khurik In Tahsil Kaza Distt L And S Hp Sh Co P House And Attendant Quarter Co Sump Well Co Toilet With P House And Boundary Wall Around The P House And Sump Well

Key Value

Document Fees
INR 400 /-
EMD
INR 57450.00 /-
Tender Value
INR 33.29 Lakhs /-

BOQ Items

Name of work:-Providing L.I.S to village Khurik in G.P. Khurik in Tahsil Kaza Distt. L&S (H.P).Sh :- Sh :- C/ O P/ House & attendent Quaerter , C/ O Sump well , C/O Toilet with P/ House & Boundary wall around the P/ House and Sump Well. Estimated cost :- 3329811 Earnest Money :-57450/- Time Limit Six Month
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation in foundation and trenches etc. in earth work in all kind of soil such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per direction of the Engineer-in-charge. 119.02 cum
2 2 Providing form work of steel plate 3.15mm thick planking so as to give a rough finish including shuttering, centring, shuttering and propping hight of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete and plain concrete work in lintels, beams etc. including all leads and lifts in:-
3 2.01 Foundation , footing & base of columns and like mass concrete with in all leads and lifts in all respect. 12.85 Sqm
4 2.02 Beams , cantilivers , girders and lintels sides and soffits of beams ,beam hunchings , cantilivers girders , bressumers and lintels not exceeding 1 metre in depth. 11.75 Sqm
5 2.03 Flat surface such as soffits of suspended floors, roofs, leadings the like floors etc. 200mm in thickness.. 25.21 Sqm
6 2.04 Edges of slabe and breaks in floors & walls under 20 cm. wide.
7 2.05 in vetical surfaces such as wall ( any thickness) partitions and like including attached pillasters. Buttress , plinth and string courses and like. 23.52 Sqm
8 3 Providing and laying cement concrete 1:4:8 (1cement:4sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth. 1.46 Cum
9 4 Providing and laying cement concrete 1:6:12 (1cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth. 12.13 Cum
10 5 Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-
11 5.01 I) Foundation and plinth. 1.1 cum
12 5.02 ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level. 2.2 cum
13 6 Providing and laying cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size ) and curing excluding cost of form work and reinforcement for reinforced concrete work
14 6.01 Foundation , footing & base of columns and the like mass concrete with in all leadsand lifts 2.86 cum
15 6.02 in suspended floor,roofs, landings,shelves and their supports balconies, beams,girders, bressumers and centilevers upto floor two level. 4.94 cum
16 7 Providing and placing tor steel in all RCC work including bending,binding in position complete upto floor two level. 817 Kg
17 8 Random rubble masnory/ polygonal rubble masonry(uncoursed/brought to courses)with hard stone of apporved quailty in foundation &plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12greded stone aggregate) in CM 1:6. 33.31 cum
18 9 Brick work using common brunt clay building bricks in super structure in pment mortor 1:6 (1 cement:6 sand ) in all leads and lifts (2nd class bricks) 47.83 cum
19 10 Half Brick work using common brunt clay building bricks in super structure in pment mortor 1:4 (1 cement:4sand ) in all leads and lifts (2nd class bricks) 118.33 cum
20 11 Providing wood work in frames 0f false ceilling partitions etc. (sawn and put-up in position)2nd class deodar wood. 0.99 cum
21 12 Providing wood work in frames 0f doors , windows, clearstory' windows and other frames wrought framed and fixed in position 2nd class deodar wood. 0.57 cum
22 13 Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 45 mm thick 2nd class deodar wood. 13.62 sqm.
23 14 Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of Is specification 8 S.G. with wire of dia 0.56 mm for doors ,windows i/c bright finished black enamelled iron butt hings with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect. 14.35 sqm.
24 15 Providing and fixing wooden plank ceilling with tonged and grooved jointing and wood screws ( frame work and cover fillets to be measuredand separately) 107.88 cum
25 16 Providing & fixing M.S. grills of required pattern in wooden frame of window etc.with M.S. flats, square or round barswith round headedbolts and nuts by screws (plain grills). 71.5 Kg
26 17 Providing & fixing 40x3 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embending in c.c. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size). 30 Nos.
27 18 Providing and Fixing MS Fan Clamp type -1 of 16 mm dia bar bent to shape with hooked ends in RCC slab during laying including the painting of exposed portion of loop all as per standred design complete. 2 Nos.
28 19 Providing and fixing anodised aluminium sliding door boltsanodized colour and shade with bolts and nuts screws etc. complete. (200*16) 3 Nos.
29 20 Providing and fixing aluminium tower bolts ( barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. ( 200*10) 33 Nos.
30 21 Providing ad fixing anodised MS handles with necessary screws etc. complete. (125mm) 23 Nos.
31 22 Providing and fixing 0.60 mm thick prepainted steel sheet roofing of katare metal sheet single skin trapeodial profile sheeting ISI marked conforming to relevant IS specifications over steel trusses (prepainted) galvenised steel with hot dip maltic zinc coat sheet with top coat of regular modified polyster (RMP) organic coat of 20 micron over 5 micron proner and black coat of polyster of 5 micron over primer coating including fixing of sheet with drilling and self tapping screws of size 5.5 mm dia and 55 mm length with EPQM seal complete excluding the cost of steel purlins, rafters and trusses including carriage of materials with in all leads and lifts. 75.76 Sqm
32 23 Providing and fixing 0.60 mm thick prepainted steel sheetridges or hips 60 cm over all in plain katare metal sheet single skin trapeodial profile sheeting ISI marked conforming to relevant IS specifications over steel trusses (prepainted) galvenised steel with hot dip maltic zinc coat sheet with top coat of regular modified polyster (RMP) organic coat of 20 micron over 5 micron proner and black coat of polyster of 5 micron over primer coating including fixing of sheet with drilling and self tapping screws of size 5.5 mm dia and 55 mm length with EPQM seal complete excluding the cost of steel purlins, rafters and trusses including carriage of materials with in all leads and lifts. 13.7 Rmt
33 24 Providing and fixing M.S B P Sheet 1.66 mm to 2mm thick in eaves board/ facia/ soffits/ ceilling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of the Engineer- in - charge ( Base member of steel work shall be measured and paid separately) 45.72 Sqm
34 25 Extra for providing and fixing wind ties 40x 6 mm flat iron section 45.72 metre
35 26 Steel work welded in built up sections trusses and framed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint.
36 27 in beams ,joist, channels, angles,tees, flats with connection plates of angle cleets as in main and cross beam , hip andjac rafters, purlins conneccted to common rafters & the like. 7.03 Quintal
37 28 Applying priming on new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dust and other foreign matter, sand preparing and knotting. Ready mixed paint brushing wood primer pink. 159.73 Sqm
38 29 Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning the surface of dust and other foreign matter, sand preparing and stopping with enamel paint other than white. 159.73 Sqm
39 30 6mm thick cement plaster to celling in C.M 1:3 ( 1 cement :3sand ) with in all leads and lift. 15.82 Sqm
40 31 15mm thick cement plaster in single coat on rough side of brickstoneconcrete walls for interior plastering up to floor -2 level inlcuding arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts in C.M 1:6 (1 cement, 6sand) 143.24 Sqm
41 32 20 mm thick cement plaster In single coat on rough side of brickstoneconcrete walls for interior plastering up to floor -2 level inlcuding arrisses, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts i C.M 1:6 (1 Cement ,6sand) 19.22 Sqm
42 33 white washing with lime on un-decorated wall surfaces ( two coats) to give an even shade including throughly brooming the surface to remove all, dirt, dust, mortar and other foreign matters with in all leads and lift complete in all respect. 41.69 Sqm
43 34 Distempering with dry distemper or approved brand and manufacturer (Two Coats) and of requird shade on un-decorated wall surfaces to give and even shade over and including priming coat of whiting after throughly brushing the surface free form mortar and other foreign matters withi in 117.5 Sqm
44 35 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thorouly brushing the surface to remove all dirt and remains false powdered in the surface. 19.22 Sqm
45 36 Pointing on Bricks work ith cement mortor 1:3 ( 1 cement 3 sand) with in all leads and lifts complete in all respect Raised and cut 78.54 Sqm
46 37 Boulder filling under floor. 11.76 cum
47 38 Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1cement:3sand:6 graded stone aggregate 20 mm nominal size. 16.59 Sqm
48 39 Providing under layer for plinth protection of 75mm thick (unconsolidated) bed of dry brick/stone aggregate 40mm nominal size) well remmed and consolidated and grouted with fine sand including preparation of ground. 16.59 Sqm
49 40 Terazzo tile flooring with precaste tarrazo tile 20mm thick with marblechips of spcified size laid in floors ,treads of steps and landing on a bed of 25 mm average thickness of cement mortor 1 :6 ( 1 cement 6 sand) jointed with neat cement slury mixed with pigment to match the shade of tile where ever required including rubbing and polishing complete with tile of following shade medium with in all leads and lifts complete in all respect. 50.8 Sqm
50 41 Electrical work:- Wiring for light point/fan/point/ exhaust fan/ call bell pint with 1.5 sq mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conducto rcable in surface/ recessed PVC conduit and earthing the light point with 1.5 sq mm. HRFRLS/PVC insulated single core copper conductor cable as required. 45 No
51 41.01 Wiring for circuit/ sub-main with following size PVC insulated heart resistant flame retardant (HRFR) and low smoke single core (flexible) copper copper conductor cable in surface/recessed PVC conduit along with 1 No HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.
52 41.02 2x1.5 sqmm. 450 metre
53 41.03 2x2.5 sqmm 300 metre
54 42 Suplying and fixing following rating switch/ socket in the existing swith box/ cover palte including connections etc. as required.
55 42.01 S.P.5/6 Amps one way switch. 45 No
56 43 Supplying and fixing following raing piano-type switch / socket on the existing switch box/ cover including connections etc. as required.
57 43.01 S.P. 15/16 Amps one way switch, porcelain base/ piano type 9 No
58 43.02 5 pin 5/6 Amps socket outlet, porcelain base/ paino type. 9 No
59 43.03 6 Pin 15/16 Amps socket outlet, procelain base/ piano type. 9 No
60 44 Supplying & fixing wooden box of following sizes (nominal size) on surface or in recess suitable for fixing phenolic laminated sheet cover in front including painting etc. as required:-
61 44.01 229mm x102mm.x60mm. Deep 12 No
62 44.02 203mm.x152mm.x60mm.Deep 6 No
63 44.03 250mm.x300mm.x100mm.Deep 6 No
64 45 providing and installing testing and commissioning of prewired fluorescent tube fitting, complete with ballast, starter and capacitors but excluding fluorescent tube rod, suitable to operate on 230 volts, single phase AC supply directly on surface with copper wiring as required F/Tube 1x40 watt, including all leads and lift and carriage of materials and as directed by the Engineer incgarge. Group C Box type categorv A. 9 No
65 46 Providing and fixing florescent tuble rod 4 feet long in the existing tube fittings as required as per specification on the caragory with in all leads, lifts and to the entire satisfaction of engineer incharge. 9 No
66 47 Providing Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet on the fan box and earthing etc. as required.
67 47.01 Ceiling Fan 1200 mm sweep, Category -A 6 No
68 48 supplying and fixing ceiling rose on the existing junction box/ wooden block including connections etc. as required. 9 No
69 49 Supplying and fixing palin pendent with 16/0.20 mm twin twised. Flexible ,PVC insulated, cotton braided, copper cable and bakelite pendent holder including connections etc. as required:- 12 No
70 50 Supplying and fixing of following way, single pole and neutral sheet steel MCB distributiion board, 240 Volts, on surface/ recess, complete with tinned copper bus- bar, wireset neutral link, earht bar, din-bar, detachable glandf plate blanking plate, cable identification labels interconnections, phosphatized and powder painted, including earthing etc. as required.
71 50.01 Single door - 8 way 3 No
72 50.02 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required,
73 50.03 63 Amps. Cat -A 3 No
74 51 Providing and fixing following type of surfac e mounting decorative mirror optics luminaire with powder coated CRCA sheet steel housing , low glare alumnuim mirror reflector, prewired with 110 V starter & 36/40 w copper ballast for housing CFL (but excluding the cost of CFL) complete with all accessories, connections, testing and commissioning etc. as required.
75 51.01 2x36 watt -CFL (Category -A) 6 No
76 52 providing and laying aluminum conductor, PVC insulated and PVC sheathed, armoured/ XLPE Power cable, working Voltage grade direct in ground to be laid 1 meter below the ground level inlcuding excavation sand cushioning, protective covering and refilling the trench etc. of the requird size:-
77 52.01 alminium cable 6 sq mm (twin core) 180 metre
78 53 Providing and laying HDPE Pipes 20mm dia electric wiring for street light including earht work complate with in all leads, lifts and to the entire satisfaction of Engineer in - charge. 180 metre
79 54 Providing and laying in trenches 10kgf/cm2 working pressure polythelene pipe high density conforing to IS 4984-1972 complete with special flanges compression type fitting earth work in to be measured and paid for separately.
80 54.01 125mm PE -80 ( PN 2.50) 45 Rmt
81 55 P/F angle iron door, window, cllereston window frame manufactured from steel iron section of 40x40x6mm, thickness including hinges jamb, lock jamb, beed and if rerquired angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including butt hinges 2.50 mm thick with provision for locking arrangement and shock as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer- in-charge. 6.45 metre
82 56 cement concrete flooring 1:2:4 (1 cement :2sand :4graded stone agg. 20mm nominal size) laid in one layer finished with a floating of neat cement 40mm thick. 1.44 sqm
83 57 Providing and fixing to wall ceiling and floor galvanised mild steel tubes (MG) including fitting and clamps including making good the wall ceiling and floor complete in all respect in all leads and lifts and to the entire satisfaction of Engineer-in -Charge. 12 No
84 58 Providing and placing (at all height) polyethylene water storage tank ISI: 12701 marked including the BIS License No with cover and suitable locking arrangement and making necessary holes for inlet, Outlet and overflow pipes including all fittings and float valve excluding the base support for tank, {Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license] 300 Ltrs, capacity. 1 No
85 59 Providing and fixing vitreous china wash, down water closet (European type. W.C pan) with intergral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1sand ) Seat and cover to be measured and paid for separately Anglo indaian Universal closet, 1 No
86 60 Providing and fixing plastic seat and cover for wash down water closet with C.P brass hinges and rubber buffers White plastic seat and cover , solid type, 1 No
87 61 Providing and fixing PVC /G.I inlet connection for flush pipe connecting with W.C Pan. 1 No
88 62 Providing and fixing C.P brass stop cock (concealed) of standed design and of approved make conforming to IS:8931 15mm nominal size) 1 No
89 63 Providing and fixing C.P brass stop cock (concealed) of standed design and of approved make conforming to IS:8931 15mm nominal bore. 2 No
90 64 Providing and fixing C.P brass angle valve of standed design and of approved make conforming to IS:8931 15mm nominal bore. 2 No
91 65 Providing and fixing C.P water jet including connection pipe with check nut complate in all reslpect. 1 No
92 66 Providing and fixing PVC pipes of 10 kg f/Sq.cm working pressure including fittings as per requirement at site complate in all respect in all leads and to the entire satisfaction of Engineer -in- Charge i) 110 mm OD 10 No
93 67 P/F Steel Gate of size 1.20x1.50 m as per drawing attached 1 No
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail