Supply, Installation, testing and commissioning of Diesel generator
311G
1
Nos
2
2
Foundation works for housing the DG set
Comp 1
1
Nos
3
3
Supply of suitable size extra exhaust line as per standard including bends, flanges, nut, bolt and necessary supports and covered with laying of Glass wool and cladding with aluminium with accessories pipe and silencer wherever necessary suitable for DG set supplied. (Per Meter)
Comp2
5
Nos
4
4
Manual control panel with changeover of required specification and with all connection
Comp 3
1
Nos
5
5
Sufficient earthing arrangements required for the DG set including construction of earth chamber and covering with heavy duty cast iron cover hinged to cast iron frame
Comp 4
1
set
6
6
All the electrical connections to the existing busbar/ system through change over switch and commissioning with suitable cable (Per Meter) The laying of cable shall be as per the KSEI standards, which includes Laying directly on wall surface (clamped with 40 x 3mm MS flat clamp)
Comp 5
20
Mtr
7
7
All the electrical connections to the existing busbar/ system through change over switch and commissioning with suitable cable (Per Meter) The laying of cable shall be as per the KSEI standards, which includes Laying direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc
Comp 6
20
Mtr
8
8
All the electrical connections to the existing busbar/ system through change over switch and commissioning with suitable cable (Per Meter) The laying of cable shall be as per the KSEI standards, which includes Laying through Cable tray
Comp 7
20
Mtr
9
9
Canopy with polycarbonate sheet for the safeguard of DG set and enclosure to control panels
Comp 8
1
Nos
10
10
All statutory approval from electrical inspectorate and the same is to be regularized from KSEB
Comp 9
1
Nos
11
11
Supply and installation of Generator AMF control panel with contactors of required specification
Comp 10
1
Nos
12
12
Supply and laying of 12c X 2.5 sq.mm copper cable for AMF Control cabling
Comp 11
10
mtr
13
13
Supply and installation of Changeover with contactors and interlocking
Comp 12
2
Nos
14
14
The epoxy coating for all the metallic parts of the DG set and its components in costal areas (Not taken for evaluation)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
