Development Of Dead Animals Samshanbhoomi At . Amc Slauter House Premises , Padegaon .

Tender Notice

25813281
Development Of Dead Animals Samshanbhoomi At . Amc Slauter House Premises , Padegaon .
Indian
Maharashtra
23-10-2020
29-10-2020
02-11-2020

Tender Details

Development Of Dead Animals Samshanbhoomi At . Amc Slauter House Premises , Padegaon . , excavation for foundation in earth , soil of all types , sand , gravel and soft murum , including removing the excavated material up to a distance of 50 m . beyond the building area and stacking and spreading as directed , dewatering , preparing the bed for the foundation and necessary back filling , ramming , watering including shoring and strutting etc . complete . ( lift upto 1 . 5 m . ) ssr no . 21 . 02 , excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed , dewatering , preparing the bed for the foundation and necessary back filling , ramming , watering including shoring and strutting etc . complete . ( lift from 1 . 5 to 3 . 0m . ) ssr . no . 21 . 08 , providing soling using 80 mm size trap metal in 15 cm . layer including filling voids with crushed sand/grit , ramming , watering etc . complete . , providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water , formwork , laying/pumping , compacting , roughening them if special finish is to be provided , finishing if required and curing complete , with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant ( pan mixer ) etc . complete . with natural sand/v . s . i . quality artificial sand ssr no . 24 . 01 , filling in plinth and floors with contractors material/brought from outside and approved by engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc . complete . , providing and fabricating structural steel work in rolled sections like joists , channels , angles , tees etc . as per detailed design and drawings or as directed including cutting , fabricating , hoisting , erecting , fixing in position making riveted / bolted /welded connections without connecting plates , braces etc . and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc . complete . ssr no . 23 . 01 , providing , fabricating and erecting at site of work the tubular steel structure ( shed ) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications , inclusive of cost of steel tubular trusses , tubular columns purlins , tie runners , foundation bolts , base plates , nuts and bolts , welding wherever required etc . as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc . complete . spec . no . : as directed by engineer-in-charge . ssr no . 23 . 07 , providing and fixing 50 mm . dia . medium class g . i . pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c . c . block at top and bottom with locking arrangement including cutting , bending , making holes and with one coat of primer etc . complete . ssr no . 23 . 05 , providing and laying cast in situ/ready mix cement concrete in m15 of trap/ granite/quartzite/gneiss metal for bed blocks , foundation blocks and such other items including bailing out water , plywood/steel formwork , laying/ pumping , compacting , roughening them if special finish is to be provided , finishing uneven and honeycombed surface and curing etc . complete . the cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only . newly laid concrete shall be covered by gunny bag , plastic , tarpaulin etc . ( wooden centering will not be allowed . ) , with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant ( pan mixer ) etc . complete . with natural sand/v . s . i . quality artificial sand ssr no . 24 . 08 , providing and fixing corrugated galvanised iron sheets of 0 . 63mm thick ( 24 b . w . g . ) for roofing without wind tiles including fastening with galvanised iron screws and bolts , lead and bitumen washers as per drawing etc . complete . ( weight of 5 . 5 kg/sq . m . ) . ssr no . 38 . 04 , providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0 . 9 mm with lock plate of 3 . 15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides , deep m . s . channel section of depth and thickness not less than 65 mm and 3 . 15 mm respectively with hold fast arrangements , m . s . bracket plate 300 x 300 x 3 . 15 mm minimum size and shape with square bar , suspension shaft of minimum 32 mm diameter , hood cover of m . s . sheet not less than 0 . 9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc . complete . ( i . s . 62481979 ) ( without mechanical gear ) ssr no . 39 . 24 , providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size , crossings of m . s . flats of size 18 x 5 mm t or e section for runner of minimum 40 x 6 mm size for flange , m . s . flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade f . g . 150 fitted with snap headed rivets of minimum size 6 mm max . spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts , stoppers , spaces , handles , locking arrangement and one coat of red lead primer and oil painting etc . complete . ( i . s . 105211983 ) . ssr no . 39 . 26 , providing and laying in situ cement concrete m20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc . complete . ssr no . 33 . 30 , supplying and fixing m200 grade pracast kerb stones 500x460c100 thk . size as derected by engineer in charge ( as per sanction rate ) , providing and fixing heavy duty inter locking concrete gray paving blocks of 80 mm thickness of having a strength of 300 kg/sq . cm . of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc . complete . ssr no . 33 . 50 , providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r . c . c . work in foundations like raft , strip foundations , grillage and footings of r . c . c . columns and steel stanchions etc . including bailing out water , formwork , laying/pumping cover blocks , compaction and curing roughening the surface if special finish is to be provided ( excluding reinforcement and structural steel ) etc . complete , with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant ( pan mixer ) etc . complete . with natural sand/v . s . i . quality artificial sand ssr no . 25 . 11 , providing and laying cast in situ/ready mix cement concrete m 20 of trap / granite /quartzite/ gneiss metal for r . c . c . columns as per detailed designs and drawing or as directed including centering , formwork , cover blocks , laying/pumping , compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc . complete , ( excluding reinforcement and structural steel ) . with fully automatic micro processor based plc with scada enabled reversible drum type mixer/

Key Value

Document Fees
INR 1200 /-
EMD
INR 59000.00 /-
Tender Value
INR 59.02 Lakhs /-

BOQ Items

Name of Work: Developmet of Dead Animals SamshanBhoomi At. AMC Slauter House Premises, Padegaon.
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) SSR No.21.02 1 71.172 Cum
2 2 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.)\nSSR. No.21.08\n 2 112.158 Cum
3 3 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 3 39.488 Cum
4 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand\nSSR No.24.01\n 4 26.325 Cum
5 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 5 106.033 Cum
6 6 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. SSR No.23.01 6 4.94 M.T.
7 7 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.\nSpec. No. : As directed by Engineer-in-charge.\nSSR NO.23.07\n 7 3.144 M.T.
8 8 Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. SSR NO.23.05 8 19.2 Sqm
9 9 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand\nSSR No.24.08\n 9 32.4 Cum
10 10 Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.). SSR No.38.04 10 1686.5 Running Metre
11 11 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of\nM.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) SSR No.39.24\n 11 7.2 Sqm
12 12 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). SSR No.39.26 12 7.2 Sqm
13 13 Providing and laying in situ cement concrete M20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4mm wide and 20mm deep with necessary refilling with bitumen etc. complete. SSR No.33.30 13 135 Sqm
14 14 Supplying and Fixing M200 grade pracast kerb stones 500X460C100 thk. Size as derected by Engineer in Charge ( As per Sanction rate) 14 50 Per.No
15 15 Providing and fixing heavy duty inter locking concrete Gray paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. SSR No.33.50 15 135 Sqm
16 16 Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR No.25.11 16 20.544 Cum
17 17 Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand 17 15.3088 Cum
18 18 Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR No.25.50 18 12.4545 Cum
19 19 Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR No.26.05 19 0.72 Cum
20 20 Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR. No25.70 20 13.8 Cum
21 21 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR No.26.33 21 4.39 Cum
22 22 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR No.27.01 22 12.5028 Cum
23 23 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete SSR No.27.05 23 54.0339 Cum
24 24 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm . SSR. No.39.56 24 40.5 Sqm
25 25 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete SSR No.39.58 25 12.2 Running Metre
26 26 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. SSR No.40.02 26 8.64 Sqm
27 27 Providing and fixing in position factory made box type steel window with glazed fanlight including steel windows of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and metal pressed steel shutters of 20 gauge (1mm) as per detailed drawing and design or as directed including providing horizontal mild steel 12mm square bars at 10cm center to center, required F7B section, section 76, section 20mm x 5mm mild steel flat for shutter and F4B section for frame, 3mm thick glass of approved quality for fanlight necessary fixtures and fastening etc. complete finishing with one coat of anticorrosive paint etc.complete SSR No.39.22 27 11.04 Sqm
28 28 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.\nSSR No.39.68\n 28 8.9775 No.
29 29 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. SSR No.27.06 29 17.04 Cum
30 30 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. SSR No.32.04 30 67.5 Sqm
31 31 Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. SSR No.32.07 31 248.94 Sqm
32 32 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR No.32.11 32 181.965 Sqm
33 33 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. BDL 32.154 Spec No. Ad directed by Engineer in Charge \nSSR No.32.15\n 33 316.44 Sqm
34 34 Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. SSR No.33.05 34 60.75 Sqm
35 35 Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR No.33.26 35 9.75 Sqm
36 36 Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. SSR No.33.27 36 2.52 Sqm
37 37 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622- 2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring\nSSR No.33.40\n 37 67.5 Sqm
38 38 Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.\nSSR No.31.09\n 38 120 Sqm
39 39 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters SSR No.42.53 39 1000 Litter
40 40 Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR No.42.61 40 50 Running Metre
41 41 Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.SSR No.42.63 41 100 Running Metre
42 42 Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR No.42.66 42 10 Running Metre
43 43 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. BDV 5 42.67 Page 551 and As directed by Engineer in Charge SSR No.42.67 43 2 Running Metre
44 44 Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. SSR No.42.28 44 8 Running Metre
45 45 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100 kg etc. complete. SSR No.42.16 45 5 No.
46 46 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)\nSSR No.42.18\n 46 1 No.
47 47 Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. SSR No.42.03 47 100 No.
48 48 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.\nSSR No.41.40\n 48 4 No
49 49 Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall. 49 2 No
50 50 Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete SSR No.41.65 50 2 no
51 51 Providing and fixing white glazed earthenware sink 600mm x 200mm x 450mm including all connection of the G.I. supply and P.V.C. waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. SSR No.41.75 Sr.No.1608. 51 1 No
52 52 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size\n5.00 m x 0.60 m and height is 0.75 m) SSR NO.41.78\n 52 4.5 NO
53 53 Providing and fixing partition with kadappa stone of all sizes and 25 mm thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polish- ing, cleaning etc complete. SSR No.42.29 53 1.125 Rgm
54 54 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. SSR No.42.30 54 2 Sqm
55 55 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. SSR No.33.34 55 3.5 Sqm
56 56 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. SSR No.35.7 56 34.32 Sqm
57 57 Providing and applying primer coat for internal wall surface and celling including scaffoldin to receive oil bound distemper treatment etc. complete. SSR No.35.28 57 316.44 Sqm
58 58 Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 58 181.96 Sqm
59 59 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. SSR No.36.11 59 316.44 Sqm
60 60 Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. SSR No.44.09 60 465 Running Metre
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail