Military Engineer Services-MES has published Repairs Replacement To Road Side Benches Footpath Road Side Boards And Other Misc Works Under Age Br Ii Of Ge Nw Vasco 8309/E8. Submission Date for this Tender is 11-11-2020. Footpath Work Tenders in VASCO Goa. Bidders can get complete Tender details and download the document.
| NAME OF WORK : REPAIRS / REPLACEMENT TO ROAD SIDE BENCHES, FOOTPATH, ROAD SIDE BOARDS AND OTHER MISC WORKS UNDER AGE B/R - II OF GE (NW) VASCO. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) including chequered tiles etc complete. | 42.625 | Cum | |
| 2 | 2 | Demolition of brick/ block or laterite stone masonry in cement mortar incl coping etc. | 5 | Cum | |
| 3 | 3 | Dismantling iron or mild steel work of any description not otherwise provided for | 3.5 | Qtl | |
| 4 | 4 | Dismantling Plain or corrugated steel sheeting,any gauge, thickness, includingNainital or similar pattern roof coverings \n | 55 | Sqm | |
| 5 | 5 | M & L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. | 50 | Sqm | |
| 6 | 6 | S&F Steel rolling shutters, incl Taking down old one with outball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer;erected in position as indicated,complete: push pull or manual type | 10 | Sqm | |
| 7 | 7 | Repair to rolling shutter of any type and size by taking down and greesing/oiling and replacing of damaged parts like ball bearing etc and refixing in the same opening all as directed. | 50 | Sqm | |
| 8 | 8 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 5 | Sqm | |
| 9 | 9 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed | 5 | Cum | |
| 10 | 10 | M & L for Pre - cast cement concrete block masonry with solid blocks of Grade C-5.0 (using 20mm graded stone aggregate) exc. 10 cm in width wall built in cement mortar 1:6 all as specified and as directed. | 5 | Cum | |
| 11 | 11 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. | 100 | Sqm | |
| 12 | 12 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra cement). | 150 | Sqm | |
| 13 | 13 | M&L preparing new plastered surfaces of wall and applying three coats of white wash to match with existing surface | 150 | Sqm | |
| 14 | 14 | M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in fdn, filling and mass concrete | 8 | Cum | |
| 15 | 15 | S&F of MS plates (plain or chequered) channels, square cut or notched with revited, bottle or welded attachement etc complete (Fe 410-W(Gde E-250) quality A). | 20 | Kg | |
| 16 | 16 | M&L painting to old steel surfaces over of 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer etc complete including preparation of surfaces. | 500 | Sqm | |
| 17 | 17 | M&L for hardcore (broken stone or boulders) of gauge n exc 63mm deposited, spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface | 5 | Cum | |
| 18 | 18 | M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in hard standing 100mm thick with necessary form work etc complete. | 140 | Sqm | |
| 19 | 19 | M&L for PCC (1:2:4) type B1 using 20mm graded aggregate as finishing coat 20mm thick finished even and smooth without using extra cement etc complete. | 100 | Sqm | |
| 20 | 20 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound of grade 'B'. | 5 | 10RM | |
| 21 | 21 | Forming contraction (Dummy) joints 50mm deep x 10mm wide filled with sealing compound of grade 'B'. | 12 | 10RM | |
| 22 | 22 | Finishing surface of concrete by brooming while concrete is green. | 10 | 10 Sqm | |
| 23 | 23 | M&L for laying rubber moulded machine pressed precast conctete interlocking coloured paver blocks of any shape and size confirming to IS 15658-2006 of 60 mm thickness with gray cement and cement M-35 Grade | 140 | Sqm | |
| 24 | 24 | M&L laying sand for cushion bed including spreading levelling in layers n.exc 25 cm thick,watering and consolidations for Paver blocks all as specified and as directed. | 7 | Cum | |
| 25 | 25 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar. | 14 | Per 10 Sqm | |
| 26 | 26 | M&L 75mm thick cement concrete 1:3:6 type C1 using 20mm graded stone aggregate, as in plinth protection or in similar work finished even and smooth without using extra cement. | 75 | Sqm | |
| 27 | 27 | M&L coloured chequered concrete tiles 22- 25mm thick set and jointed in coloured cement as in floors/ pavings with gray cement and no pigment. | 200 | Sqm | |
| 28 | 28 | Screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor tiles. | 200 | Sqm | |
| 29 | 29 | Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. | 200 | Sqm | |
| 30 | 30 | Demolition of existing cement concrete (reinforced) of any type and in any position not otherwise specifically provided for all as directed. | 3 | Cum | |
| 31 | 31 | S&F mild steel CRS TMT bars 6mm to 8mm dia, cut to length, bend to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete. | 200 | Kg | |
| 32 | 32 | M&L for precast cement concrete (1:2:4) type B1, using (20mm graded stone aggregate) as in cover slab for manholes, etc set in CM (1:6) including necessary use and waste of formwork complete all as specified and directed. | 3 | Cum | |
| 33 | 33 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixing with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/disintegrated rock. | 45 | Each | |
| 34 | 34 | M&L Preparing new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of Red oxide, zinc chrome primer complete. | 200 | Sqm | |
| 35 | 35 | M&L for preparation of old painted surfaces of wall and applying one coat of synthetic enemal paint over plastered surfaces as in Kerb or similar all as directed. | 1000 | Sqm | |
| 36 | 36 | M&L for preparation of old painted surfaces of road/hard standing and similar and applying one coat of water based paint | 500 | Sqm | |
| 37 | 37 | M&L for cleaning of old surfaces of wall/tile and applying one coat of tile paint all as directed. | 2000 | sqm | |
| 38 | 38 | M& L for painting Steel old surface of any description, over 10cm in width or girth, not otherwise described (two coat of synthetic enamal paint including preparation of surface) | 600 | Sqm | |
| 39 | 39 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and as directed by Engineer- in Charge.. | 100 | Kg | |
| 40 | 40 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape requred, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (and welded to existing reinforcement of any description and any position of RCC structure after binding with mld steel wire annealed n less than 0.9 mm dia s an addl bar complete all directed) (annealed) not less than 0.9mm dia or securing with clips complete all as specified. (also bent to shape reqd and welded to existing reinforcement of any description and any position of RCC structure | 30 | Kg | |
| 41 | 41 | Mild steel TMT bars from 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) (welded to existing reinf of any descripton)not less than 0.9mm dia or securing with clips complete all as specified.(also for providing extra reinforcement to any structrual member in any position as a stirrup and binder) | 20 | Kg | |
| 42 | 42 | S & F reinforced cement concrete(1:2:4) in benches in repairs , Type B-0 using 12.5mm graded stone aggregate of 1.80m legth & 0.95m wide( including sitting width and slanted height) and 50mm thick . Including necesssary formwork chamfering etc using welded mesh reinforcement. The bench to be supported at ends with RCC of same specification with bottom embedded portion of size 0.50x0.60x50-70mm thick with concrete and propper embeded below GL upto 15 cm incl concrete etc complete. The supports to be embedded in PCC 1:3:6 (0.60m x 0.70m x 0.20m) including necessary formwork and earthwork. The benches above to be painted in multi colour with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. | 23 | Each | |
| 43 | 43 | S & F in repair Polycarbonate Convex Mirrors have high mirror thickness & reflectivity of size 80cm x 80cm Ideal for usage at Blind Spots providing viewing angle of 130 degrees with FRP brim and back holding plates | 2 | Each | |
| 44 | 44 | M & L for SS framed work in repair for fixing ACP board all as directed.\n\n | 75 | KG | |
| 45 | 45 | M& L ACP board reflective type two way (both side writing work) information / signboard and fixed in ss frame including necessary arrangement in repair all as specified and directed. . | 8 | Sqm | |
| 46 | 46 | Supply and fix Retro Reflective Radium self adhesive sheet of any colour over ACP board on one or both side in repair all as directed. | 12 | Sqm | |
| 47 | 47 | M & L writing letter efflorecent (reflective type), comma, arrow marks or any other symbole with any colour on ACP Board of size not exc 100 mm with suitable width reflective type all as directed. | 100 | Each | |
| 48 | 48 | S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete in repair all as specified and directed by Engineer-in-Charge. | 5 | Sqm | |
| 49 | 49 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running railsand guides for sliding doors; fixed with angle cleats or other connecting plates | 250 | Kg |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
