2016-2017 Lac -Ads - ( Dharmadam La ) Special Repair To Mens Hostel And Womens Hostel , Brennen College , Thalassery , In Kannur Dist
Tender Value
81.50 Lakhs
Estimated cost
Bid Submission
30 Oct 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
dharmadam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
2016-2017 Lac -Ads - ( Dharmadam La ) Special Repair To Mens Hostel And Womens Hostel , Brennen College , Thalassery , In Kannur Dist
BOQ
| Work Name:2016-2017 LAC -ADS -( DHARMADAM LA) Special Repair to Mens Hostel and Womens Hostel ,Brennen College , Thalassery , in Kannur Dist | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Mens Hostel Repair & Ladies hostel Repair | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | 15.56 : Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | BI01010001010000000000000515BI0100001114 | 2013.54 | sqm |
| 3 | 1.02 | 15.2.2 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix) | BI01010001010000000000000515BI0100001115 | 2.481 | cum |
| 4 | 1.03 | 15.9.2 : Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar | BI01010001010000000000000515BI0100001116 | 7.2 | cum |
| 5 | 1.04 | 14.1.1 : Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand) | BI01010001010000000000000515BI0100001117 | 24.5 | sqm |
| 6 | 1.05 | 15.12.1 : Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | BI01010001010000000000000515BI0100001118 | 9 | each |
| 7 | 1.06 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001119 | 71.311 | cum |
| 8 | 1.07 | 4.1.5 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001120 | 50.345 | cum |
| 9 | 1.08 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001121 | 4.05 | cum |
| 10 | 1.09 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001122 | 5.633 | cum |
| 11 | 1.1 | od14394/2019_2020 : Laterate dry masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size for<br>leach pit including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001123 | 3.675 | cum |
| 12 | 1.11 | od77498/2018_2019 : Laterate masonry with neatly dressed laterate stone of size 35x20x20cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. | BI01010001010000000000000515BI0100001124 | 63.118 | cum |
| 13 | 1.12 | od11481/2019_2020 : Laterite masonry with neatly dressed laterite stone of stone of size 35x20x20cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials , labour charges etc. | BI01010001010000000000000515BI0100001125 | 24.208 | cum |
| 14 | 1.13 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001126 | 0.4 | cum |
| 15 | 1.14 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001127 | 3.191 | cum |
| 16 | 1.15 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001128 | 32 | kilogram |
| 17 | 1.16 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001129 | 287.19 | kg |
| 18 | 1.17 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001130 | 35.138 | sqm |
| 19 | 1.18 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001131 | 840.927 | sqm |
| 20 | 1.19 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001132 | 27 | cum |
| 21 | 1.2 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001133 | 2047.02 | sqm |
| 22 | 1.21 | 11.47.2 : Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001134 | 170.438 | sqm |
| 23 | 1.22 | 50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001135 | 1291.87 | kg |
| 24 | 1.23 | od77521/2018_2019 : Providing & fixing Aluminium powder coated traffold roofing sheets of good quality up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. | BI01010001010000000000000515BI0100001136 | 69.441 | sqm |
| 25 | 1.24 | 12.4.2 : Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001137 | 8 | metre |
| 26 | 1.25 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001138 | 3575.6 | kg |
| 27 | 1.26 | 50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001139 | 1.287 | cum |
| 28 | 1.27 | 50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001140 | 54.974 | sqm |
| 29 | 1.28 | 50.9.4.1 : Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Anjili/ Jack wood | BI01010001010000000000000515BI0100001141 | 26.465 | sqm |
| 30 | 1.29 | 50.9.2.1 : Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge.using Anjili/ Jack wood | BI01010001010000000000000515BI0100001142 | 6.284 | sqm |
| 31 | 1.3 | 14.6.1 : Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm | BI01010001010000000000000515BI0100001143 | 3.422 | sqm |
| 32 | 1.31 | 9.97.4 : 150x10 mm150x10 mm | BI01010001010000000000000515BI0100001144 | 40 | no |
| 33 | 1.32 | 50.9.15.1 : Supplying and fixing 200 mm Aluminium aldrop | BI01010001010000000000000515BI0100001145 | 20 | no |
| 34 | 1.33 | 9.88 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | BI01010001010000000000000515BI0100001146 | 18 | no |
| 35 | 1.34 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001147 | 305 | sqm |
| 36 | 1.35 | 13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer | BI01010001010000000000000515BI0100001148 | 8713.93 | sqm |
| 37 | 1.36 | 13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001149 | 8713.93 | sqm |
| 38 | 1.37 | 14.67.1 : Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:Old work ( Two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface | BI01010001010000000000000515BI0100001150 | 2888 | sqm |
| 39 | 1.38 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001151 | 1469.03 | sqm |
| 40 | 1.39 | 10.26.3 : Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approves steel primer.G.I. pipes | BI01010001010000000000000515BI0100001152 | 1146.96 | kg |
| 41 | 2 | Construction of open well | BI01010001010000000000000515BI0100001153 | ||
| 42 | 2.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001154 | 14.887 | cum |
| 43 | 2.02 | od35560/2020_2021 : For first depth of 1.5m after initial depth of 1.5m ie between 1.5m &3m | BI01010001010000000000000515BI0100001155 | 14.425 | cum |
| 44 | 2.03 | od35563/2020_2021 : For 2nd depth of 1.5m after initial depth of 1.5m ie between 3-4.5m | BI01010001010000000000000515BI0100001156 | 14.425 | cum |
| 45 | 2.04 | od35554/2020_2021 : For 3rd depth of 1.5m after initial depth of 1.5m ie between 4.5 to 6.0m | BI01010001010000000000000515BI0100001157 | 14.425 | cum |
| 46 | 2.05 | od35565/2020_2021 : For 4th depth of 1.5m after initial depth of 1.5m ie between 6-7.5m | BI01010001010000000000000515BI0100001158 | 14.425 | cum |
| 47 | 2.06 | od35566/2020_2021 : For5th depth of 1.5m after initial depth of 1.5m ie between 7.5-9m | BI01010001010000000000000515BI0100001159 | 14.425 | cum |
| 48 | 2.07 | od35568/2020_2021 : For 6thdepth of 1.5m after initial depth of 1.5m ie between 9to 10.5m | BI01010001010000000000000515BI0100001160 | 14.425 | cum |
| 49 | 2.08 | od35569/2020_2021 : For 7th depth of 1.5m after initial depth of 1.5m ie between 10.5-12m | BI01010001010000000000000515BI0100001161 | 14.425 | cum |
| 50 | 2.09 | od35571/2020_2021 : For8th depth of 1.5m after initial depth of 1.5m ie between 12-13.5m | BI01010001010000000000000515BI0100001162 | 14.425 | cum |
| 51 | 2.1 | od35572/2020_2021 : For 9th depth of 1.5m after initial depth of 1.5m ie between 13.5to15.0m | BI01010001010000000000000515BI0100001163 | 14.425 | cum |
| 52 | 2.11 | od35633/2020_2021 : For 10th depth of 1.5m after initial depth of 1.5m ie between 15-16.5 | BI01010001010000000000000515BI0100001164 | 14.425 | cum |
| 53 | 2.12 | od35586/2020_2021 : Laterite masonry with neatly dressed laterite stone of size 35x20x20cm or nearest size cm 1:6 for well stening including cost of materials labour charges etc | BI01010001010000000000000515BI0100001165 | 32.123 | cum |
| 54 | 2.13 | od35609/2020_2021 : Laterite masonry with neatly dressed laterite stone of size 35x20x20cm or nearest in CM 1:6 for foundation and basement including all cost of materials labour charges etc. | BI01010001010000000000000515BI0100001166 | 5.226 | cum |
| 55 | 2.14 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001167 | 37.745 | sqm |
| 56 | 2.15 | 50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001168 | 40 | metre |
| 57 | 2.16 | 50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2 | BI01010001010000000000000515BI0100001169 | 40 | metre |
| 58 | 2.17 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001170 | 70 | kg |
AI Tender Summary
Tender Timeline
Oct 23, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 02, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender