Jjm 2020 2021 Karakulam Panchayath Providing Functional Household Tap Connections Pipe Line Extensions Supply And Errection Of Pump Set And Construction Of Steel Storage Tank In Karakulam Grama Panchayath
Tender Value
3.50 Crore
Estimated cost
Bid Submission
02 Nov 2020
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
7500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Karakulam → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Jjm 2020 2021 Karakulam Panchayath Providing Functional Household Tap Connections Pipe Line Extensions Supply And Errection Of Pump Set And Construction Of Steel Storage Tank In Karakulam Grama Panchayath
BOQ
| Name of Work: : JJM - 2020-2021 -Karakaulam Panchayath - Providing Functional Household Tap Connections, Pipe line extensions, Supply and erection of Pump set and Construction of Steel Storage Tank in Karakulam Grama Panchayath | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Annexture 1-Pipe line extension | |||
| 2 | 1.01 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil (Ref. Item No. 2.10.1 of DSR) | BI01010001010000000000000515BI0100001115 | 7425 | cum |
| 3 | 1.02 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. (Data Prepared based on PWD SDB - Item No.1009) | BI01010001010000000000000515BI0100001116 | 7000 | metre |
| 4 | 1.03 | Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffice diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. | BI01010001010000000000000515BI0100001117 | 4000 | metre |
| 5 | 1.04 | Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | BI01010001010000000000000515BI0100001118 | 75 | cum |
| 6 | 1.05 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).32 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001119 | 1500 | metre |
| 7 | 1.06 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 40 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001120 | 1500 | metre |
| 8 | 1.07 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials) 50 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001121 | 1000 | metre |
| 9 | 1.08 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).63 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001122 | 2000 | metre |
| 10 | 1.09 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).75 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001123 | 3000 | metre |
| 11 | 1.1 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials). 90 mm nominal outer dia pipes.\" | BI01010001010000000000000515BI0100001124 | 2000 | metre |
| 12 | 1.11 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).110 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001125 | 1500 | metre |
| 13 | 1.12 | Laying UPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipe line to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipe line with water to the required test pressure (excluding cost of pipes and specials).160 mm nominal outer dia pipes. | BI01010001010000000000000515BI0100001126 | 2500 | metre |
| 14 | 1.13 | Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work80 mm dia nominal bore | BI01010001010000000000000515BI0100001127 | 20 | metre |
| 15 | 1.14 | Providing and fixing G.I. pipes complete with G.I fittings including trenching and refilling etc. External work50 mm dia nominal bore | BI01010001010000000000000515BI0100001128 | 250 | metre |
| 16 | 1.15 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001129 | 75 | cum |
| 17 | 1.16 | Supply of PVC Pipe, 10kg/cm2, 32mm Dia. | BI01010001010000000000000515BI0100001130 | 1500 | metre |
| 18 | 1.17 | Supply of PVC Pipe, 10kg/cm2, 40mm Dia. | BI01010001010000000000000515BI0100001131 | 1500 | metre |
| 19 | 1.18 | Supply of PVC Pipe, 10kg/cm2, 50mm Dia. | BI01010001010000000000000515BI0100001132 | 1000 | metre |
| 20 | 1.19 | Supply of PVC Pipe, 10kg/cm2, 63mm Dia. | BI01010001010000000000000515BI0100001133 | 2000 | metre |
| 21 | 1.2 | Supply of PVC Pipe, 10kg/cm2, 75mm Dia. | BI01010001010000000000000515BI0100001134 | 3000 | metre |
| 22 | 1.21 | Supply of PVC Pipe, 10kg/cm2, 90mm Dia. | BI01010001010000000000000515BI0100001135 | 2000 | metre |
| 23 | 1.22 | Supply of PVC Pipe, 10kg/cm2, 110mm Dia. | BI01010001010000000000000515BI0100001136 | 1500 | metre |
| 24 | 1.23 | Supply of PVC Pipe, 10kg/cm2, 160mm Dia. | BI01010001010000000000000515BI0100001137 | 2500 | metre |
| 25 | 1.24 | Taking connection from 160/140/110 /90 to /75/63/50/40/32 mm or nearest size.PVC/GI distribution main a<br>branch line using suitable equal Tee(suitable class),reducer, CID/CIR and reducers including cost of materials labor charge etc complete.<br> | BI01010001010000000000000515BI0100001138 | 50 | No |
| 26 | 1.25 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :80 mm diameter. Class I\"Observed Data derived from item no.18.31.of DAR | BI01010001010000000000000515BI0100001139 | 5 | Nos |
| 27 | 1.26 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :100 mm diameter. Class I\"Data derived from item no.18.31.1.1of DAR | BI01010001010000000000000515BI0100001140 | 5 | Nos |
| 28 | 1.27 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :125 mm diameter. Class I\"Data derived from item no.18.31.2.1 of DAR | BI01010001010000000000000515BI0100001141 | 2 | Nos |
| 29 | 1.28 | Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :150 mm diameter. Class I\"Data derived from item no.18.31.3.1 of DAR | BI01010001010000000000000515BI0100001142 | 5 | Nos |
| 30 | 1.29 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :200 mm diameter. Class I\"Data derived from item no.18.31.4.1 of DAR | BI01010001010000000000000515BI0100001143 | 5 | Nos |
| 31 | 1.3 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :250 mm diameter. Class I\"Data derived from item no.18.31.5.1 of DAR | BI01010001010000000000000515BI0100001144 | 3 | Nos |
| 32 | 1.31 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :300 mm diameter. Class I\"Data derived from item no.18.31.6.1 of DAR | BI01010001010000000000000515BI0100001145 | 2 | Nos |
| 33 | 1.32 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm. | BI01010001010000000000000515BI0100001146 | 5 | No |
| 34 | 1.33 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm. | BI01010001010000000000000515BI0100001147 | 5 | No |
| 35 | 1.34 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 125mm. | BI01010001010000000000000515BI0100001148 | 2 | No |
| 36 | 1.35 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 150mm. | BI01010001010000000000000515BI0100001149 | 5 | No |
| 37 | 1.36 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 200mm. | BI01010001010000000000000515BI0100001150 | 5 | No |
| 38 | 1.37 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 250mm. | BI01010001010000000000000515BI0100001151 | 3 | No |
| 39 | 1.38 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 300mm. | BI01010001010000000000000515BI0100001152 | 2 | No |
| 40 | 1.39 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:80 mm diameter pipe | BI01010001010000000000000515BI0100001153 | 10 | Nos |
| 41 | 1.4 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:100 mm diameter pipe | BI01010001010000000000000515BI0100001154 | 14 | Nos |
| 42 | 1.41 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:125 mm diameter pipe | BI01010001010000000000000515BI0100001155 | 4 | Nos |
| 43 | 1.42 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:150 mm diameter pipe | BI01010001010000000000000515BI0100001156 | 10 | Nos |
| 44 | 1.43 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:200 mm diameter pipe | BI01010001010000000000000515BI0100001157 | 8 | Nos |
| 45 | 1.44 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:250 mm diameter pipe | BI01010001010000000000000515BI0100001158 | 6 | Nos |
| 46 | 1.45 | Providing flanged joints to double flanged C.I./ D.I pipes and specials, including testing of joints:300 mm diameter pipe | BI01010001010000000000000515BI0100001159 | 4 | Nos |
| 47 | 1.46 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore | BI01010001010000000000000515BI0100001160 | 5 | No |
| 48 | 1.47 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore | BI01010001010000000000000515BI0100001161 | 10 | No |
| 49 | 1.48 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore | BI01010001010000000000000515BI0100001162 | 5 | No |
| 50 | 1.49 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore | BI01010001010000000000000515BI0100001163 | 15 | No |
| 51 | 1.5 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore | BI01010001010000000000000515BI0100001164 | 5 | No |
| 52 | 1.51 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 40 mm Single acting Air Valve Observed Data derived from item no.18.59.of DAR | BI01010001010000000000000515BI0100001165 | 10 | Nos |
| 53 | 1.52 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately):50 mm Double acting Air Valve Data derived from item no.18.59.1 of DAR | BI01010001010000000000000515BI0100001166 | 10 | Nos |
| 54 | 1.53 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 80 mm Double acting Air Valve Data derived from item no.18.59.2 of DAR | BI01010001010000000000000515BI0100001167 | 5 | Nos |
| 55 | 1.54 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 40mm. | BI01010001010000000000000515BI0100001168 | 10 | No |
| 56 | 1.55 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 50mm. | BI01010001010000000000000515BI0100001169 | 10 | No |
| 57 | 1.56 | Supply of CI Air Valve with Flanges, Conforming to IS 14845 - 2000, Kinetic Air Valve Type DS1, Size 80mm. | BI01010001010000000000000515BI0100001170 | 5 | No |
| 58 | 1.57 | cost of pvc specials 3% | BI01010001010000000000000515BI0100001171 | 114040 | L.S |
| 59 | 1.58 | Supplying and errection 110 mm PVC pipe in the valve for identifying and controlling whenever necessary without causing any damage to pipe line. Charges including cost of pipe and fittings etc. complete | BI01010001010000000000000515BI0100001172 | 50 | No |
| 60 | 1.59 | Construction of valve chamber of size 0.9x0.9x1.00 inside including conveying supplying and fixing CI manhole cover of dia 560 mm | BI01010001010000000000000515BI0100001173 | 15 | No |
| 61 | 2 | providing house hold connections | BI01010001010000000000000515BI0100001174 | ||
| 62 | 2.01 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains up to 110 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001175 | 400 | Nos |
| 63 | 2.02 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001176 | 150 | Nos |
| 64 | 2.03 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing PVC / HDPE mains from 140mm to 200mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, PVC Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001177 | 260 | Nos |
| 65 | 2.04 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing CI mains up to 125 mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001178 | 150 | Nos |
| 66 | 2.05 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing AC / GI mains from 150mm to 200mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers, GI / MS / SS Service Saddle of suitable size etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001179 | 100 | Nos |
| 67 | 2.06 | Providing 15mm (1/2 inch) house connection with 15mm (1/2 inch) water meter from existing CI mains from 150mm to 200mm dia., up to a length of 5 m using 20mm Indian Standard Class 6 uPVC pipe and uPVC / GM / Brass specials viz. brass ferrule, GM full way wheel valve, Elbow, MTA, FTA, couplers etc. and connecting with the mains, testing the joints etc. complete including trenching and refilling in all kinds of soil up to a depth of 1.50m for main line tracing and trench of average cross section 0.3m x 0.75m for laying connection pipe and service pipe, fixing water meter, lighting, watching, providing caution boards, traffic control etc. complete including cost of materials, hire for tools, cost of consumables and labour charges, including the cost of tested Class B Multijet water meter with ISI mark and weather resistant PP / PE meter box of minimum size 300mm x 200mm x 150mm, but excluding charges for cutting the concrete / tarred / bituminous roads etc, and as per the direction of the departmental officers. | BI01010001010000000000000515BI0100001180 | 75 | Nos |
| 68 | 2.07 | Providing additional length of house connection pipe using 20mm Indian Standard Class 6 uPVC pipe and specials and testing the joints etc., by trenching and refilling in all kinds of soil with trench of average cross section 0.3m x 0.75m for laying of connection pipe and service pipe, lighting, watching, providing caution boards, traffic control etc., including cost of materials, hire for tools, cost of consumables and labour charges etc. complete, but excluding the cost of cutting of concrete / tarred / bituminous roads etc., and as per the directions of the department officers. | BI01010001010000000000000515BI0100001181 | 10000 | metre |
| 69 | 2.08 | Providing 20mm (1/2 inch) PVC Air Valve in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire for tools and labour charges etc. complete and as per the directions of the department officers. | BI01010001010000000000000515BI0100001182 | 100 | Nos |
| 70 | 2.09 | Providing 15mm PVC Tap in the water meter assembly for 15mm connection, using 20mm Indian Standard Class 6 uPVC pipes and specials including cost of materials, consumables, hire charges for tools and labour charges etc. complete and as per the direction of departmental officers. | BI01010001010000000000000515BI0100001183 | 1135 | Nos |
| 71 | 2.1 | Geo tagging of FHTCs including data updation in KWA web site | BI01010001010000000000000515BI0100001184 | 1135 | No |
| 72 | 3 | construction of steel tank at kallayam | BI01010001010000000000000515BI0100001185 | ||
| 73 | 3.01 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil | BI01010001010000000000000515BI0100001186 | 128.129 | cum |
| 74 | 3.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001187 | 8.009 | cum |
| 75 | 3.03 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001188 | 95.095 | cum |
| 76 | 3.04 | Centering and shuttering including strutting, etc. and removal of form for: | BI01010001010000000000000515BI0100001189 | 273.55 | sqm |
| 77 | 3.05 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001190 | 10000 | kilogram |
| 78 | 3.06 | Supply,installation and commissioning of a pre-engineered, pre-fabricated, factory manufactured steel<br>storage Water Tank having a capacity of 200000 L for the storage and supply of Potable Drinking Water<br>with corrugated section Zincalume steel sheet for the shell<br>in minimum thickness of 0.6 mm, in multiple layers as required for the capacity and height of the tank and<br>multiple-layered PE sheet/membrane for the inner containment liner.The Tank Shell / Body & the Liner<br>material shall be manufactured in a facility certified and compliant to ISO 9001 ? 2000 standards. The<br>Tank shall be supplied with access points, penetrations for inlets, outlets, drains and fittings, overflow and<br>drain, high and low water level indicators.All connections to the tanks shall be with flanged or threaded<br>nozzles, placed to the KWA water mains<br>TANK ROOF<br>The roof of the tank shall be of corrugated Galvalume sheet steel and shall be domed, with heavy- duty<br>Hot-dip Galvanized truss frame for support, and capable of supporting 4-5 persons for maintenance and<br>cleaning and tank shall have an access hatch with cover, on the roof, for operation and Maintenance.<br>TANK COVER<br>Tank covers shall be of approved galvanized vermin proof construction. Roof ends shall be fitted with<br>suitable vermin-proofing tape or other material, to prevent ingress of dust and foreign objects. Covers<br>shall be firmly fixed to the top edge of the tank with galvanized bolts and nuts.<br>LADDERS<br>Tanks shall be provided with Hot-dip Galvanized ladders internally or externally. External roof supports<br>shall be of an appropriately designed Hot-dip galvanized steel construction. Tanks shall comply with<br>relevant spill level, air gap and overflow requirements relative to Effective Capacity. All nuts and bolts<br>used for the panels shall be a minimum of 12mm size and hot-dip galvanized/Case hardened. The tank<br>shall have a circular angle fixed around the total circumference of the tanks, at the top, of minimum 2 mm<br>thickness.Tanks shall be properly flushed out with clean water prior to being brought into service.<br>TANK DIMENSIONS<br>The dimensions of the Tank shall be of 4.85m in diameter and 5.70m in heightDESIGN LIFE<br>The tanks shall have a design life of 50 years.<br>TANK CONNECTIONS<br>Standard design valve outlet connection : One No. 200mm CI Flanged valve.<br>ii) Overflow connection including an internal approved bell-mouth shaped bends to maximize the overflow<br>capacity. ? One no. 100 mm.<br>iii) One (1) scour drain outlet from the floor of the tank with isolation valve. One No. 100 mm<br>TANK LINERS<br>Tank liners shall be purpose-designed and manufactured and shall comply to AS/NZS 4020 (Appendix A)<br>of 2005 and ANSI/NSF 61 ? 2008, Section 5 Certificates of compliance to above standards shall be<br>furnished by the manufacturer of the tanks.<br>Tank liners shall:<br>i) Be factory manufactured to one- piece construction, fabricated from multi-layer PE sheet, certified for<br>potable drinking water, to ANSI NSF 61 and duly UV Stabilized.<br>ii) Be of PE (polyethylene) in multi-layer construction for strength, reinforced with woven scrim industrial<br>fabric to prevent elongation and enhance tensile strength.<br>The contact surface shall be of Metallocene layer.<br>iii) The total liner material thickness shall be no less than 0.8 mm thickDESIGN LIFE<br>The tanks shall have a design life of 50 years.<br>TANK CONNECTIONS<br>Standard design valve outlet connection : One No. 200mm CI Flanged valve.<br>ii) Overflow connection including an internal approved bell-mouth shaped bends to maximize the overflow<br>capacity. ? One no. 100 mm.<br>iii) One (1) scour drain outlet from the floor of the tank with isolation valve. One No. 100 mm<br>TANK LINERS<br>Tank liners shall be purpose-designed and manufactured and shall comply to AS/NZS 4020 (Appendix A)<br>of 2005 and ANSI/NSF 61 ? 2008, Section 5 Certificates of compliance to above standards shall be<br>furnished by the manufacturer of the tanks.<br>Tank liners shall:<br>i) Be factory manufactured to one- piece construction, fabricated from multi-layer PE sheet, certified for<br>potable drinking water, to ANSI NSF 61 and duly UV Stabilized.<br>ii) Be of PE (polyethylene) in multi-layer construction for strength, reinforced with woven scrim industrial<br>fabric to prevent elongation and enhance tensile strength.<br>The contact surface shall be of Metallocene layer.<br>iii) The total liner material thickness shall be no less than 0.8 mm thickiv) The tensile strength shall not be less than 2266 N (warp) and 2495 N (weft) and heat sealing strength<br>of 2056 N<br>v) All the liner welded lap joints shall be strengthened with Metallocene encapsulating tape welded over<br>the overlap.<br>vi) The Metallocene tape shall cover and protect the exposed material at the edges of the liner joints to<br>further prevent the ingress of water into the scrim.<br>vii) Liners shall be positively and continuously attached to the top outer edge of the circumference of the<br>tank to prevent entry of water from the runoff from the roof structure.<br>viii) All liners on tanks over 2 m in height shall have a continuous intermediate liner support designed out<br>of nylon (or other material)cord, around the circumference of the tank, at vertical intervals corresponding<br>to the level of each ring.<br>ix) The intermediate liner support cords shall be firmly secured to the steel shell at each level, to prevent<br>stress on the liner welded joints, and thereby eliminate possibility of failure<br>CORROSSION PROTECTION<br>The tank structure shall have a secondary corrosion protection system using sacrificial magnesium<br>anodes. The number of anodes, their location around the tank and the mass of each anode shall be<br>designed for anode replacement frequency of five years.<br>The anodes shall be installed external to the tank and concrete apron with their location marked with a<br>suitably label<br>1<br> | BI01010001010000000000000515BI0100001191 | 400000 | Litre |
| 79 | 4 | Supply, erection and commissioning of New Pump sets | BI01010001010000000000000515BI0100001192 | ||
| 80 | 4.01 | Supply, erection, testing, commissioning and maintaining of KWA pre-qualified reputed make 1 No 200 HP centrifugal pump sets with the following specifications with a warranty of minimum 2 years (Vide Circular No. KWA/HO/SP-333/2014 dated 18.03.2016) 1. Pump Supply erection testing and commissioning of KWA pre-qualified reputed make centrifugal pump sets with Bronze/SS impeller, SS shaft and CI pump casing with suitable type base plate with coupling, coupling guard foundation bolts and nuts etc. complete suitable for coupling the pump and motor above the base plate etc. complete including providing suitable concrete foundation including cost of cement sand and metal etc. complete with discharge = 79LPS, total head = 134 m, Length of pumping main = 7000m, 300 mm dia CI pipe 2.Motor - Supply, erection, testing and commissioning of KWA pre-qualified reputed make horizontal solid shaft foot mounted TEFC squirrel cage induction motor suitable for the above pump working 3 phase 50 Hz AC supply, working voltage 415 V/3300V ( select the suitable ). The motor shall confirm to EEF1/ IS 325 including providing suitable concrete foundation including cost of cement, sand and metal etc. complete. For 3300v motors digital motor protection relay shall be included in the starter as per present IE rules. Flexible coupling shall be used for coupling of pumps and motors 3. Starter - Supply, erection, testing and commissioning of suitable rating (Fully Automatic soft starter with air break contact for less than 200HP and for above 200 HP FCMA starters to be used) starter suitable for the above motor with over voltage and under voltage protection, single phase preventer, over load relay with motor protection relay with main contactor and bypass contactor as per IE rules and code of practice etc. complete. 4. Panel board (suitable for operating two pump sets but one pump set at a time) - Supply, erection, testing and commissioning of cubical type floor mounted MS fabricated dust and vermin proof common control panel board consisting of 1 no. suitable capacity MCCB as incomer and 2 Nos of suitable capacity MCCB as outgoing ( the two MCCB s are interlocking with each other) providing suitable size Aluminium bus bar inter connect the above MCCBs and fitted with 3 Nos of indicator lamps, 1 no . volt meter with selector switch, 1 no. Ammeter with selector switch etc. Complete and provided with a common earth bus for the entire panel and inter connect with the MCCBS as per IE rules and code of practice. The panel shall be fitted on a common base frame on suitable foundation. 5. Cabling work - Supply, laying, testing and commissioning of suitable size XLPE cables for the above pump set from panel board to starter and from starter to motor considering energy conservation.6.Earthing - Supply of all materials and providing suitable earthing by using suitable size pipe/plate earthing GI/copper strip buried in ground and giving double earthing to motor, starter, panel board etc.as per IE standards.7. Capacitor - Supply, erection, testing and commissioning of heavy duty APP capacitor for the motor to get a power factor above 0.95 . The capacitor shall confirm to IS 2834 8. Valves - Supply of suitable size best quality heavy duty ISI marked CI double flanged sluice valve and Non return valve with suitable pressure rating. Fitting of valves shall include proper RCC support, fitting of valves shall include proper RCC support especially for Non return valves. In case of positive suction pump set sluice valve should be in suction as well as delivery sides for easy repair works. 9. Suction and delivery pipe connections - Supply and fitting of suitable size best quality GI/MS pipe for a total length of 10 m. suitable for the above pump set and suitable size foot valve and connecting the suction pipe and valve with suitable flanges, nut and bolts IR sheet etc. complete and connecting the delivery side of the pump with the valves and suitable specials to connect with the pumping main.<br> | BI01010001010000000000000515BI0100001193 | 1 | No |
| 81 | 4.02 | Supply , erection testing and commissioning of suitable electrically driven best Quality make ISI mark 35HP Vertical turbine pump set and motor having 3333 LPM discharge against a total head of 31Mtr . With all accessories of such as sheet metal panel board , main switch , starter power capacitor , ammeter, voltmeter, single phasing cum dry running prevent indicating lamps woth selector switches pressure guage CI sluice valve, non return valve, earthing materials, wiring materials, flat submersible cable, required length of GI wiring materials, flat submersible cable , required length of suction and delivery pipe and specials etc. Including all cost , conveyance, erection, trial running charges etc. complete. | BI01010001010000000000000515BI0100001194 | 2 | No |
| 82 | 5 | Replacing of 300mm MS pumping main | BI01010001010000000000000515BI0100001195 | ||
| 83 | 5.01 | Fencing one side of trenches, 1.50 m height with two rows of 10 cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2 m intervals. (Data Prepared based on PWD SDB - Item No.1009) | BI01010001010000000000000515BI0100001196 | 500 | metre |
| 84 | 5.02 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil (Ref. Item No. 2.10.1 of DSR) | BI01010001010000000000000515BI0100001197 | 615 | cum |
| 85 | 5.03 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but not exceeding 3 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: 1.50m to 3.0mAll kinds of soil (Ref. Item No. 2.11 of DSR) | BI01010001010000000000000515BI0100001198 | 75 | cum |
| 86 | 5.04 | Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge. | BI01010001010000000000000515BI0100001199 | 30370 | kg |
| 87 | 5.05 | Fabricating MS pipes of size 300mm (ID) using 10 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steelwork with two or more coat epoxy paint to give an even shade over an undercoat of primer etc. complete: For pipes fabricated with 10mm thick MS plates. | BI01010001010000000000000515BI0100001200 | 500 | metre |
| 88 | 5.06 | Fabricating MS flanges of diameter 300 mm using 12 mm thick MS plate including cost and conveyance charges of MS plate, all fabrication charges, charges of painting the steel work with two or more coat deluxe multi surface paint to give an even shade over an under coat of primer etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001201 | 10 | Nos |
| 89 | 5.07 | Cutting 300 mm (ID) MS pipes for making bends and other specials by gas cutting including cost of gas, all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001202 | 10 | No |
| 90 | 5.08 | Welding 300 mm (ID) MS pipes for making bends and other specials by gas/electric welding machine including cost of gas and welding rods ,all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001203 | 10 | No |
| 91 | 5.09 | Grinding cut and weld edges of 300 mm (ID) MS pipes during fabrication work including all labour and hire charges of tools etc. complete: For pipes fabricated with 8mm thick MS plates. | BI01010001010000000000000515BI0100001204 | 10 | No |
| 92 | 5.1 | Interconnecting the existing 300mm DI pipe with newly laid 300 mm MS pipe | BI01010001010000000000000515BI0100001205 | 4 | No |
| 93 | 5.11 | Conveying and laying MS pipes excluding cost of pipe and specials:<br>300 mm dia pipe | BI01010001010000000000000515BI0100001206 | 500 | metre |
| 94 | 5.12 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | BI01010001010000000000000515BI0100001207 | 496.12 | sqm |
| 95 | 5.13 | \"Conveying and fixing C.I. sluice valves (with cap) by providing complete with bolts, nuts, rubber insertions etc. excluding the cost of valve (the tail pieces if required will be paid separately) :300 mm diameter. Class I\"Data derived from item no.18.31.6.1 of DAR | BI01010001010000000000000515BI0100001208 | 1 | Nos |
| 96 | 5.14 | Conveying and fixing C I Single acting Air Valve of approved quality with bolts,nuts,rubber insertions etc . excluding the cost of air valve(the tail pieces if required will be paid seperately): 80 mm Double acting Air Valve Data derived from item no.18.59.2 of DAR | BI01010001010000000000000515BI0100001209 | 1 | Nos |
| 97 | 5.15 | Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 80mm. | BI01010001010000000000000515BI0100001210 | 1 | No |
| 98 | 5.16 | Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 350mm. | BI01010001010000000000000515BI0100001211 | 1 | No |
| 99 | 5.17 | conveying charges for old MS pipe from the site to Kummi Plant including cost of crane for loading and unloading , shifting charge , rent for truck etc complete | BI01010001010000000000000515BI0100001212 | 13.971 | tonne |
| 100 | 5.18 | Providing labour for controlling traffic and other related works | BI01010001010000000000000515BI0100001213 | 20 | No |
| 101 | 5.19 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001214 | 5 | cum |
| 102 | 5.2 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001215 | 500 | kilogram |
| 103 | 5.21 | Providing and fixing 300mm cast iron fabricated Zero velocity valve flange type drilling as per IS 538 MOC, Body and door cast iron IS 210 FG 200, door seal EPDM, Retainer seat stainless steel AISI 304, stem-stainless steel AISI 304. Charges including cost of material, conveyance, labour charge etc. complete. | BI01010001010000000000000515BI0100001216 | 1 | No |
| 104 | 6 | Survey and Mapping | BI01010001010000000000000515BI0100001217 | ||
| 105 | 6.01 | Surveying using Electronic Total Station with double prism in normal terrain and normal traffic. | BI01010001010000000000000515BI0100001218 | 8 | km |
| 106 | 6.02 | Surveying using Electronic Total Station with double prism in hilly terrain / normal terrain with heavy traffic. | BI01010001010000000000000515BI0100001219 | 6 | km |
| 107 | 7 | Supply of new filled chlorine cylinder | BI01010001010000000000000515BI0100001220 | ||
| 108 | 7.01 | Supply of new filled chlorine cylinder of capacity 100kg with necessary test and explosive certificate including testing, registration, chlorine filling from TCC including conveyance charges to Water Treatment Plant at Kummy, Aruvikkara | BI01010001010000000000000515BI0100001221 | 24 | No |
AI Tender Summary
Tender Timeline
Oct 22, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 04, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender