| 1 | 1 | AlmirahSteel med (FD 67/1032)\nS & F following components of Almirah steel medium including dismantling unserviceable one complete all as specified and as directed:- \n(a) Lock with duplicate keys (Make of Lock- LICO/RINA) | | 300 | Each |
|---|
| 2 | 2 | (b) Handle 100 mm size chromium plated | | 220 | Each |
|---|
| 3 | 3 | (c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 30 | Each |
|---|
| 4 | 4 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 55 | Each |
|---|
| 5 | 5 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of primer both inside and outside after preparation of surface complete all as specified and shown on drawing.\n(Note for steel painting;- All steel surface shall be done with spray painting)\n(Make of Lock-LICO/RINA) | | 12 | Each |
|---|
| 6 | 6 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. | | 75 | Each |
|---|
| 7 | 7 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of (spray painting) synthetic enamel paint of olive green shade of approved quality both inside and outside including dents/bends complete all as specified and as directed. | | 360 | Each |
|---|
| 8 | 8 | Almirah steel large (FD-67/1031)\nS & F following components of Almirah steel large including dismantling unserviceable one all as specified and as directed:-\n(a) Lock duplicate keys (Make of Lock-LICO/RINA) | | 60 | Each |
|---|
| 9 | 9 | (b) Handle 100 mm size chromium plated | | 50 | Each |
|---|
| 10 | 10 | (c) 3 way locking device with necessary fittings and painted with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 8 | Each |
|---|
| 11 | 11 | (d) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 30 | Each |
|---|
| 12 | 12 | (e) Supply and fix door shutters made of 1mm thick CRCA sheet including chromium plated steel handle 100mm size -01 No, 3 way locking device with lock with duplicate keys- 01 No, key hole and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer both inside and outside after preparation of surface complete all as specified and shown on drawing (Make of Lock-LICO/RINA) | | 4 | Each |
|---|
| 13 | 13 | (f) Supply and fix shelves made of 1mm thick CRCA sheet welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 40 | Each |
|---|
| 14 | 14 | (g) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. | | 80 | Each |
|---|
| 15 | 15 | Locker steel (FD-1029)\nS & F following components of Locker steel including dismantling unservicable one all as specified and as directed.\n(a) Handle 100 mm size chromium plated | | 80 | Each |
|---|
| 16 | 16 | (b) Hasp & staple chromium plated | | 60 | Each |
|---|
| 17 | 17 | (c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of red oxide primer. | | 10 | Each |
|---|
| 18 | 18 | (d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer both inside and outside after preparation of surface complete all as specified and as directed. | | 4 | Each |
|---|
| 19 | 19 | (e) Supply and fix curtain rod stainless steel 20mm dia of 1.6mm wall thickness of locker steel complete. | | 20 | Each |
|---|
| 20 | 20 | (f) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. | | 110 | Each |
|---|
| 21 | 21 | Locker steel size 1500x530x600 mm \nS & F following components of Locker steel including dismantling unservicable one all as specified and as directed.\n(a) Handle 100 mm size chromium plated | | 300 | Each |
|---|
| 22 | 22 | (b) Lock duplicate keys (Make of Lock-LICO/RINA) | | 310 | Each |
|---|
| 23 | 23 | (c) Supply and fix leg made of 1mm thick CRCA sheet duly welded/riveted and painted with one coat of synthetic emamel paint of olive green shade of approved quality over a coat of primer. | | 110 | Each |
|---|
| 24 | 24 | (d) S & F door shutters made of 1mm thick CRCA sheet including chromium plated handle 100mm size -01 No, chromium plated hasp & stapple of approved quality and painting with one coat of synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer both inside and outside after preparation of surface complete all as specified and as directed. | | 10 | Each |
|---|
| 25 | 25 | (e) S & F new bottom drawer duly painted of the locker bedside. | | 110 | Each |
|---|
| 26 | 26 | (f) Supply and fix curtain rod stainless steel 20mm dia of 1.6mm wall thickness of locker steel complete. | | 180 | Each |
|---|
| 27 | 27 | (f) Preparation of old painted steel sufaces of locker steel size (1500x530x600)mm by scraping with emary paper, cleaning, dusting and making the surfaces smooth by applying putty primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete including dents/bends complete all as specified and as directed. | | 490 | Each |
|---|
| 28 | 28 | Table dining 900x 900 mm steel (FD-1009)\nS & F following components of Table dinning 900x900 mm steel including dismantling unservicable one all as specified and as directed.\n(a) Leg/stiffener 25 x 25 x 1.6mm thick MS square pipe duly welded to the frame including minor repairs to the table and painting the replaced portion. | | 20 | Each |
|---|
| 29 | 29 | (b) Table top made of 18mm thick pre-laminated MDF board exterior quality of teak line shade including provision of 4mm thick teakwood beading all around. | | 250 | Each |
|---|
| 30 | 30 | (c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of olive green shade of approved quality. | | 250 | Each |
|---|
| 31 | 31 | (d) PVC shoe | | 1000 | Each |
|---|
| 32 | 32 | Table office officer/clerk steel (FD-84/1003, 1004)\nS & F following components of Table office/clerk steel including dismantling unservicable one all as specified and as directed:-\n(a) Drawer made of 1mm CRCA sheet including painting with synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer both inside and outside including preparation of surfaces and repairing inter locking system and providing new lock 6 lever to top drawer. | | 30 | Each |
|---|
| 33 | 33 | (b) Leg/stiffener (25 x 25)mm x 1.6mm thick MS square pipe duly welded to the frame and painted with one coat of synthetic enamel paint over a coat of red oxide primer. | | 40 | Each |
|---|
| 34 | 34 | (c) Lock with duplicate keys(Make- Lico/Rina) | | 100 | Each |
|---|
| 35 | 35 | (d) Complete box comprising of 03 drawers made of 1mm CRCA sheet including locking arrangement/accessories and painting with synthetic enamel paint of olive green shade of approved quality over a coat of red oxide primer/putty of Table office Officer/Clerk Steel. | | 20 | Each |
|---|
| 36 | 36 | (e) Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of Table office Officer Steel. | | 28 | Each |
|---|
| 37 | 37 | (f) Top made of 18mm thick pre-laminated particle board one side teak face including provision of 4mm thick teakwood beading all around complete of Table Office Clerk Steel. | | 60 | Each |
|---|
| 38 | 38 | (g) PVC shoe | | 300 | Each |
|---|
| 39 | 39 | (h) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed for Table Office Officers Steel | | 70 | Each |
|---|
| 40 | 40 | (j) Preparation of old painted steel sufaces by scraping with emary paper, cleaning, dedusting and making the surfaces smooth by applying putty/red oxide primer wherever required and applying one coat of synthetic enamel paint of olive green shade of approved quality both inside and outside complete all as specified and as directed for Table Office Clerk Steel | | 70 | Each |
|---|
| 41 | 41 | Chair steel tubular with/ without arms (FD-75 M)\nS & F following components of Chair steel tubular with/ without arms made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing including dismantling unservicable one all as specified and as directed.\n(a) Seat frame | | 320 | Each |
|---|
| 42 | 42 | (b) Back frame | | 320 | Each |
|---|
| 43 | 43 | (c) Handle made of shisham wood duly french polished and fixed to the chair tubular with arms with screws of suitable size. | | 500 | Each |
|---|
| 44 | 44 | (d) MS Flat size (25 x 25)mm x 4mm thick welded at corner at bottom of the seat only to support and screwed with the seat . | | 400 | Each |
|---|
| 45 | 45 | (e) Preparation of surfaces and painting with synthetic enamel paint OG colour to chair steel tubular with/without arms including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame. | | 320 | Each |
|---|
| 46 | 46 | Table 1520x860x760 mm Steel Removing of old unserviceable top of table (1520x860)mm x760mm and S & F new top made up of 18mm thick commercial plywood covered with 0.5mm thick aluminium sheet complete all as specified and as directed by Engineer-in-Charge. | | 50 | Each |
|---|
| 47 | 47 | Preparation of old painted steel sufaces of table (1520x860)mm x 760mm steel by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of olive green synthetic enamel paint including fixing of four Nos of PVC shoes to each leg. | | 50 | Each |
|---|
| 48 | 48 | Chair Verandah(FD-256) Preparation of steel tubular frame surfaces with emery paper and applying two coats of synthetic enamel paint of white colour of approved quality and recaning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable 04 Nos white PVC shoes to the each leg of approved quality. | | 800 | Each |
|---|
| 49 | 49 | Tepoy Varandah (FD-255/383) Preparation of old painted steel sufaces by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of white synthetic enamel paint including four Nos of White PVC shoe. | | 50 | Each |
|---|
| 50 | 50 | (b) Removing old unserviceable table top and S&F top made of 18mm thick block board pasted with 0.9 mm thick white Sunmica including 4mm thick teakwood beading all around duly polished. | | 50 | Each |
|---|
| 51 | 51 | Chair School with hand board(FD/E6/MAP/05) Removing old unserviceable PVC shell and S & F new PVC shell of Make Supreme/Ballowal Complete. | | 200 | Each |
|---|
| 52 | 52 | (b) Removing old unserviceable hand rest and S & F new hand rest made up of block board 18mm pasted with 0.9mm sunmica of approved shade of Make Supreme/Ballowal complete. | | 200 | Each |
|---|
| 53 | 53 | (c) Preparation of the old painted steel surfaces by scraping with emery paper, cleaning and applying one coat of synthetic enamel paint of black shade of approved quality. | | 250 | Each |
|---|
| 54 | 54 | (d) PVC shoe | | 800 | Each |
|---|
| 55 | 55 | Chair CBA Spl with hand rest (FD-120 M)\nS & F following components of Chair CBA Spl with hand rest made out of shisham wood french polished duly plastic canned in 'Godrej' pattern with plastic cane 2mm width and borders with 4mm wide plastic cane fixed with screws 4 Nos and nuts to the chair frame complete all as per drawing. including dismantling unservicable one all as specified and as directed.\n(a) Seat frame | | 40 | Each |
|---|
| 56 | 56 | (b) Back frame | | 40 | Each |
|---|
| 57 | 57 | (c) Hand rest made of 12mm thick comm ply pasted with 0.9mm thick sunmica of approved shade along with 4mm thick teak wood beading duly french polished and fixed to the chair CBA Spl with hand rest with screws of suitable size. | | 40 | Each |
|---|
| 58 | 58 | (e) Preparation of surfaces and painting with synthetic enamel paint OG colour to Chair CBA Spl with hand rest including 4 Nos of PVC bushes to the bottom of the chair frame and 2 Nos of PVC caps on the top of the frame. | | 50 | Each |
|---|
| 59 | 59 | Preparation of old painted steel sufaces of follwoing steel furniture items by scraping with emery paper, cleaning, dusting and making the surfaces smooth and applying two coats of olive green synthetic enamel paint for Trestle Store room iron | | 100 | Each |
|---|
| 60 | 60 | All as per item No 59 above but for FMN set(U/T type) | | 300 | Each |
|---|
| 61 | 61 | All as per item No 59 above but for Side rack with tray steel | | 50 | Each |
|---|
| 62 | 62 | All as per item No 59 above but for Rack Six tier steel/Rack Steel 1800x900x760 | | 15 | Each |
|---|
| 63 | 63 | All as per item No 59 above but for Shoe Rack steel | | 150 | Each |
|---|
