Provision Of Drainage System For Single Offrs Accn Of Div Camp , Provn Of Fresh Ration Distribution Shed Of Sup Pl Asc And Provn Of Washing Point And Overhead Shed For Patient Near Owt-163 And Cook House At Mh Of Likabali Mil Stn And Special Repairs To S
Tender Value
19.90 Lakhs
Estimated cost
Bid Submission
09 Nov 2020
0 days left
EMD
39800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LIKABALI → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Drainage System For Single Offrs Accn Of Div Camp , Provn Of Fresh Ration Distribution Shed Of Sup Pl Asc And Provn Of Washing Point And Overhead Shed For Patient Near Owt-163 And Cook House At Mh Of Likabali Mil Stn And Special Repairs To Se
BOQ
| NAME OF WORK : PROVN OF DRAINAGE SYSTEM FOR SINGLE OFFRS ACCN OF DIV CAMP, PROVN OF FRESH RATION DISTRIBUTION SHED OF SUP PL ASC AND PROVN OF WASHING POINT & OVER-HEAD SHED FOR PATIENT NEAR OWT-163 & COOK HOUSE AT MH OF LIKABALI MIL STN AND SPECIAL REPAIRS TO SECURITY FENCING AT NLP MIL STN UNDER GE 872 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | UNITS | |
| 1 | 1 | Dismantling Posts or Struts (Steel or RCC) any Section, embedded in Cement Concrete including Taking out embedded Portion of Posts or Struts and Making Good Disturbed Ground, complete all as specified and as directed.\nNOTE : Excavating in Post Holes will be Measured and Paid for separately under appropriate Items. | BI01010001010000000000000515BI0100001113 | 180 | RUNNING METRE |
| 2 | 2 | Demolition Brick Masonry or Pre-cast Concrete Block Masonry, built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 6.3 | CUBIC METRE |
| 3 | 3 | Dismantling Wrought Iron or Mild Steel Work of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 4.7 | QUINTAL |
| 4 | 4 | Dismantling Fencing Wire Mesh of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001116 | 320 | SQUARE METRE |
| 5 | 5 | Dismantling Barbed Wire of any description, complete all as specified and as directed.\nNOTE : Each Line of Barbed Wire will be Measured for Payment. | BI01010001010000000000000515BI0100001117 | 8 | HUNDRED RUNNING METRE |
| 6 | 6 | Surface Dressing not exc. 15 Cm Deep and getting out in Soft/Loose soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001118 | 120 | SQUARE METRE |
| 7 | 7 | Surface Excavation not exc. 30 Cm Deep and averaging 15 Cm Deep and getting out in Soft/Loose soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001119 | 21 | SQUARE METRE |
| 8 | 8 | Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001120 | 168 | CUBIC METRE |
| 9 | 9 | Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001121 | 31 | CUBIC METRE |
| 10 | 10 | Removing Excavated Materials (Soils) to a distance not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed. | BI01010001010000000000000515BI0100001122 | 14.15 | CUBIC METRE |
| 11 | 11 | Removing Excavated Materials (Soils) to a distance exc. 100.00 Metre but not exc. 250.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed. | BI01010001010000000000000515BI0100001123 | 126 | CUBIC METRE |
| 12 | 12 | Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed. | BI01010001010000000000000515BI0100001124 | 66 | EACH |
| 13 | 13 | M&L Hardcore Broken Stone or Boulders, gauge not exc. 63mm, deposited, Spread and Levelled in layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed. | BI01010001010000000000000515BI0100001125 | 18.75 | CUBIC METRE |
| 14 | 14 | M&L Cement Concrete 1:2:4 (40mm graded stone aggregate) in Surface Channels and Drains, etc. including necessary Formwork as ordered, complete all as specified and as directed. | BI01010001010000000000000515BI0100001126 | 2.63 | CUBIC METRE |
| 15 | 15 | M&L Extra for Forming Fair finished Drain or Channel for 45 Cm Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001127 | 175 | RUNNING METRE |
| 16 | 16 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork as ordered, complete all as specified and as directed. | BI01010001010000000000000515BI0100001128 | 17.25 | CUBIC METRE |
| 17 | 17 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork as ordered, complete all as specified and as directed. | BI01010001010000000000000515BI0100001129 | 22.93 | CUBIC METRE |
| 18 | 18 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Foundation including Rafts, Footing, Foundation Beams for Column Basement Slab, under reamed Piles, complete all as specified and as directed.\nNOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. | BI01010001010000000000000515BI0100001130 | 0.22 | CUBIC METRE |
| 19 | 19 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, Beams and Columns; in Floors, Roofs, Landings Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed.\nNOTE : Reinforcement & Formwork will be Measured and Paid for separately under appropriate Items. | BI01010001010000000000000515BI0100001131 | 0.44 | CUBIC METRE |
| 20 | 20 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Landings, Cover Slabs, Manhole Cover Slabs, etc., Set in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Reinforcement will be Measured and Paid separately under relevant Item. | BI01010001010000000000000515BI0100001132 | 6.3 | CUBIC METRE |
| 21 | 21 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Coping, Bed Plates, Benching, Holdfast, Bed Block, Kerb Stones, etc. including necessary Formwork and Weathering, slightly Rounded or Chamfered Angles and Throating, complete all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 3.5 | CUBIC METRE |
| 22 | 22 | M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams and Similar Work; Square, Rectangular or Polygonal, Vertical or to Batter, Rough Finished Surface of Concrete Flat, complete all as specified and as directed. | BI01010001010000000000000515BI0100001134 | 0.72 | SQUARE METRE |
| 23 | 23 | M&L Formwork to Soffits of Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work not exc. 200mm thick (Horizontal or Sloping) Rough Finished Surface of Concrete Flat, complete all as specified and as directed. | BI01010001010000000000000515BI0100001135 | 2.88 | SQUARE METRE |
| 24 | 24 | M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and setting in Cement Mortar 1:6, complete all as specified and as directed. | BI01010001010000000000000515BI0100001136 | 44.51 | CUBIC METRE |
| 25 | 25 | M&L TMT Bars 10mm dia and Over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. | BI01010001010000000000000515BI0100001137 | 76 | KILO-GRAM |
| 26 | 26 | M&L TMT Bars 8.0mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. | BI01010001010000000000000515BI0100001138 | 949 | KILO-GRAM |
| 27 | 27 | M&L Mild Steel Round Bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. | BI01010001010000000000000515BI0100001139 | 470 | KILO-GRAM |
| 28 | 28 | M&L Mild Steel Works such as Posts and Struts in Fencing including cutting Tops to shape as directed, drilling holes, notching for Wire, etc.; including all necessary drilling, bolting or riveting, etc. and similar Work, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. | BI01010001010000000000000515BI0100001140 | 1400 | KILO-GRAM |
| 29 | 29 | M&L Mild Steel Flat Iron 40x6.0mm (Fillet for securing Wire Mesh, etc.) cut to length including all necessary drilling, bolting or riveting, etc. and Similar Work, conforming to Fe-290 Gde E-165, complete all as specified and as directed. | BI01010001010000000000000515BI0100001141 | 100 | KILO-GRAM |
| 30 | 30 | M&L Rolled Mild Steel Sections in Main and Cross Beams, Hip & Jack Rafters, Purlins where connected to Common Rafters, Running Rails and Guides for Sliding Doors, conforming to Fe-410-W (Gde E-250), Quality 'A', fixed with Angle Cleats or Other Connecting Plates, complete all as specified and as directed. | BI01010001010000000000000515BI0100001142 | 92.62 | KILO-GRAM |
| 31 | 31 | M&L Steel Work in Tubular Trusses including Special Shaped Washer, etc. complete using ERW or Induction Butt Welded Tubes, conforming to IS-1161-1979 Grade St.-240, complete all as specified and as directed. | BI01010001010000000000000515BI0100001143 | 1350 | KILO-GRAM |
| 32 | 32 | M&L Mild Steel Plates (Plain or Chequered), Channels, Square cut, or Notched forming Holes without any Attachment, etc. in Landing including welding, etc. and Similar Work, conforming to Fe-290, Gde E-250, Quality B, complete all as specified and as directed. | BI01010001010000000000000515BI0100001144 | 125 | KILO-GRAM |
| 33 | 33 | M&L Mild Steel Screw Bolts (machine made) 5.0mm to 10mm diameter of Neck and length of Bolt exc. 5.0 Cm and not exc. 10 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed. | BI01010001010000000000000515BI0100001145 | 22 | KILO-GRAM |
| 34 | 34 | M&L Mild Steel Screw Bolts (machine made) 16mm to 20mm diameter of Neck and length of Bolt exc. 22.5 Cm and not exc. 30 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed. | BI01010001010000000000000515BI0100001146 | 25 | KILO-GRAM |
| 35 | 35 | Supply only Chain Link Fencing 100x100mm mesh with 4.0mm dia Mild Steel Galvanised Wire, complete all as specified and as directed. | BI01010001010000000000000515BI0100001147 | 760 | KILO-GRAM |
| 36 | 36 | Fixing only Chain Link Fencing including Line Wires, any mesh, size and type to any type of Standards, Rails, Straining Bolts, etc. including Provission of Mild Steel Binding Wire (annealed) not less than 0.90mm dia, complete all as specified and as directed. | BI01010001010000000000000515BI0100001148 | 320 | SQUARE METRE |
| 37 | 37 | S&F Galvanised 2 Strand, Steel Barbed Wire 2.24mm dia barbed with 2mm dia Barbs at 75mm spacings and straining and fixing to any type of Standard Rails straining Bolts, including securing or tying at crossings with and provision of Galvanised Mild Steel Wire, Staples or Steel Pins, etc., complete all as specified and as directed.\nNOTE : Each Line of Barbed Wire will be Measured for Payment. | BI01010001010000000000000515BI0100001149 | 8 | HUNDRED RUNNING METRE |
| 38 | 38 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001150 | 150 | SQUARE METRE |
| 39 | 39 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. | BI01010001010000000000000515BI0100001151 | 30 | SQUARE METRE |
| 40 | 40 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Flooring, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001152 | 9 | SQUARE METRE |
| 41 | 41 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc., finished Concrete Surfaces Fair and Even, complete all as specified and as directed. | BI01010001010000000000000515BI0100001153 | 9 | SQUARE METRE |
| 42 | 42 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular) area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate | BI01010001010000000000000515BI0100001154 | 9 | RUNNING METRE |
| 43 | 43 | M&L Glazed Ceramic Coloured Tiles 300x200x6.0mm-7.0mm thick (1st quality) in Vertical Surfaces i.e. Dado, Skirting, etc., set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.\nNOTE : Cost of Cement Screed Bed will deem to include in Quoted Unit Rate | BI01010001010000000000000515BI0100001155 | 10 | SQUARE METRE |
| 44 | 44 | M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001156 | 4 | SQUARE METRE |
| 45 | 45 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Sub-base to Pavings, etc., complete all as specified and as directed. | BI01010001010000000000000515BI0100001157 | 120 | SQUARE METRE |
| 46 | 46 | M&L Cement Concrete 1:2:4 (40mm graded stone aggregate) 75mm thick in Floors, etc., finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001158 | 120 | SQUARE METRE |
| 47 | 47 | M&L Forming Contraction (Dummy) Joint 65mm deep x 10mm filled with Sealing Compound Grade 'A', complete all as specified and as directed. | BI01010001010000000000000515BI0100001159 | 4 | TEN RUNNING METRE |
| 48 | 48 | M&L Rendering 15mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Fair and Even, complete all as specified and as directed. | BI01010001010000000000000515BI0100001160 | 81 | SQUARE METRE |
| 49 | 49 | M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001161 | 420 | SQUARE METRE |
| 50 | 50 | M&L Rendering 15mm thick on Bricks/PCC Blocks consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:6 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. \nNOTE : Water Proofing Compound (WPC) will be Measured and Paid saperately under appropriate Item. | BI01010001010000000000000515BI0100001162 | 50 | SQUARE METRE |
| 51 | 51 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. | BI01010001010000000000000515BI0100001163 | 2.51 | KILO-GRAM |
| 52 | 52 | M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed. | BI01010001010000000000000515BI0100001164 | 81 | SQUARE METRE |
| 53 | 53 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed. | BI01010001010000000000000515BI0100001165 | 50 | SQUARE METRE |
| 54 | 54 | M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. | BI01010001010000000000000515BI0100001166 | 98.5 | SQUARE METRE |
| 55 | 55 | M&L Preparing Steel and Iron Surfaces of any description, not exc. 10 Cm in Width or Girth when unconnected with other Painting or when Painted in different Tint and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. | BI01010001010000000000000515BI0100001167 | 10.5 | TEN RUNNING METRE |
| 56 | 56 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Connections/ Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. | BI01010001010000000000000515BI0100001168 | 10 | RUNNING METRE |
| 57 | 57 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Connections/ Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. | BI01010001010000000000000515BI0100001169 | 6 | RUNNING METRE |
| 58 | 58 | S&F Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butterfly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule and Chromium Plated Wall Flange, complete all as specified and as directed. | BI01010001010000000000000515BI0100001170 | 3 | EACH |
| 59 | 59 | S&F Gun Metal Gate Valve 15mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe, complete all as specified and as directed | BI01010001010000000000000515BI0100001171 | 1 | EACH |
| 60 | 60 | S&F Gun Metal Gate Valve 20mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe, complete all as specified and as directed | BI01010001010000000000000515BI0100001172 | 1 | EACH |
| 61 | 61 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule and connecting Water Supply Connections, complete all as specified and as directed. | BI01010001010000000000000515BI0100001173 | 1 | EACH |
| 62 | 62 | S&F PTMT Ball Valve 20mm bore (dia), High Pressure with Epoxy coated Aluminium Rod & High Density Plastic Ball (minimum Weight 210 Gram), screwed for Iron Pipe, complete all as specified and as directed. | BI01010001010000000000000515BI0100001174 | 1 | EACH |
| 63 | 63 | S&F Kitchen or Laboratory Sink made of Stainless Steel l.0mm thick of Overall size 495x420mm having Bowl size 410x330x160mm with Brass Chromium Plated Waste Fitting 40mm dia, Stainer, Washers and Stainless Steel Waste Fittings, etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and Connecting Union to Pipe and Fixed-in-repairs, complete all as specified and as directed. | BI01010001010000000000000515BI0100001175 | 3 | EACH |
| 64 | 64 | S&F Low Density Polyethylene Pipes (LDPE) 40mm bore (dia) of Pressure ratings 6.0 Kg/Sq Cm for drain out waste Water of Wash Hand Basin/Kitchen Sink/ Urinal, complete all as specified and as directed. | BI01010001010000000000000515BI0100001176 | 3 | RUNNING METRE |
| 65 | 65 | M&L PVC (SWR) Floor Trap, Diameter of Outlet 100mm, Plain with Grating of Chromium Plated and jointing with Solvent Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001177 | 3 | EACH |
| 66 | 66 | S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls with Clamps, complete all as specified and as directed. | BI01010001010000000000000515BI0100001178 | 10 | RUNNING METRE |
| 67 | 67 | S&F PVC (SWR) Bend 110mm bore (dia) of any type, provided with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001179 | 1 | EACH |
| 68 | 68 | S&F PVC (SWR) Junction 110mm bore (dia), Single T, Equal or Unequal, provided with Access Door, etc., jointing with Solvent Cement, complete all as specified and as directed. | BI01010001010000000000000515BI0100001180 | 2 | EACH |
AI Tender Summary
Tender Timeline
Oct 21, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender