}

Repair And Maintenance Of Runway Mansoon Drains ( Incl Cleaning And De-Silting ) Under Ge ( Af ) Tech Area At Af Stn Agra, GE (AF) TECH AREA AGRA-Uttar Pradesh

Military Engineer Services-MES has published Repair And Maintenance Of Runway Mansoon Drains ( Incl Cleaning And De-Silting ) Under Ge ( Af ) Tech Area At Af Stn Agra. Submission Date for this Tender is 02-11-2020. Drainage Tenders in GE (AF) TECH AREA AGRA Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

25792516
Repair And Maintenance Of Runway Mansoon Drains ( Incl Cleaning And De-Silting ) Under Ge ( Af ) Tech Area At Af Stn Agra
National Competitive Bid
Indian
Uttar Pradesh
GE (AF) TECH AREA AGRA
02-11-2020

Tender Details

Repair And Maintenance Of Runway Mansoon Drains ( Incl Cleaning And De-Silting ) Under Ge ( Af ) Tech Area At Af Stn Agra

Key Value

Document Fees
INR 500 /-
EMD
INR 36000.0 /-
Tender Value
INR 18 Lakhs /-

BOQ Items

Name of Work: REPAIR AND MAINT OF RUNWAY MONSOON DRAINS (INCL CLEANING AND DE-SILTING) UNDER GE (AF) TECH AREA AT AF STN AGRA
Sl. No. Item Description Item Code / Make Quantity Units
1 1 De-silting of storm water drain by cleaning of settled deposited soil/earth/silt/mud etc, including getting out and removing excavated materials and deposited the same to a distance not exceeding 500 meter complete all as specified and directed. 700 Cum
2 2 Removing & refixing of RCC drain cover of size 1250x450x270mm, approx wt 350kg using mechanical arrangements such as fork lifter, compacting & backing of loose soil free & post removal of drain covers, soil to be well rammed using water compaction, complete all as specified and directed by Engr-in-Charge. 700 Each
3 3 All as per ser item No -02 here-in-before but cover dimension 1250x450x200mm approx wt 260 kg 300 Each
4 4 Re-development of existing bore wells in position at various locations by air compressor unit of capacity not less than 300 PSI with minimum pressure of 7kg/cm2 for sand free water including all necessary materials, labour, tool & plants etc required to the entire satisfaction of Engineer-in-charge complete all as specified and directed. 350 Per hour
5 5 Checking & scrapping out old coarse sand layer for silt content to a depth till clear sand found and refilling the same by new coarse sand layer all as specified and directed. 200 Cum
6 6 Cutting of grass,shurbs,vegetation of any type & height with petrol operated grass cutter upto ground level and making the area neat & clean by removing/throwing the rubbish to a distance not less than 500 metres complete all as specified and directed. Note :- Provide minimum 4 to 6 Nos of petrol operated Grass cutter at a time including fuel whenever required. 50000 Sqm
7 7 Cutting of grass, shurbs,vegetation of any type & height with jungal zim including tractor upto ground level and making the area neat & clean by removing/throwing the rubbish to a distance not less than 500 metres complete all as specified and directed. Note :- Provide minimum 2 No's of tractor including fuel & drivers whenever required. 700000 Sqm
8 8 Cutting of grass, shurbs,vegetation of any type by manually with fawda and Talwar upto ground level and making the area neat & clean by removing/throwing the rubbish to a distance not less than 500 metres complete all as specified and directed. 1500 Sqm
9 9 Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed. 1200 Sqm
10 10 M&L for racking out joints upto a depth of 25mm, saw cutting the vertical sides of joints for making edges of joints straight upto the possible extent by keeping maximum width of joint 10 to 20 mm, cleaning all loose particles/ dust from the joints by using brushes, compressed air, blowers etc, fixing masking tape along either side of the joints, placing back up sheet 10 to 12 mm thick in position and filling with polyurethane based sealing compound (pitch free) having 3 mm recess from top of joint after applying suitable primer as per manufacturer's instructions and removing masking tap, complete all as per manufacturer's instructions and directed at site. 2000 RM
11 11 -ditto- all as per item No 10.00 above but width of joint 20 to 25MM 1310 RM
12 12 -ditto- all as per item No 10.00 above but width of joint 26 to 35MM 4610 RM
13 13 Demolition of brickwork or stone/boulder masonry, built in\ncement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast\nconcrete articles complete all as specified and directed. 20 Cum
14 14 M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed. 14 Cum
15 15 All as per item No 14.00 above but with old bricks obtained from demolition all as specified and directed 6 Cum
16 16 Taking down cement plaster in cement mortar on brick or stone walls / ceiling etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. 50 Sqm
17 17 M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work finished the surface even and smooth w/o using extra cement complete all as specified and directed. 150 Sqm
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail