Adb Yav-11 Improvement Of 05 Road In Ralegaon
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Nov 2020
0 days left
EMD
6.34 Lakhs
Bank guarantee accepted
Document Fee
16800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ralegaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Adb Yav-11 Improvement Of 05 Road In Ralegaon
BOQ
| Name of Work: 1)UPGRADATION TO WADKI TO PIMPLAPUR ROAD ( LR-15 ) IN BLOCK RALEGAON DIST. YAVATMAL 2) UPGRADATION TO SH-317 TO CHIKHANA ROAD ( LR-06 ) IN BLOCK RALEGAON DIST. YAVATMAL 3) UPGRADATION TO ODR-109 TO CHIKHALI ROAD ( LR-27 ) IN BLOCK RALEGAON DIST. YAVATMAL 4) UPGRADATION TO SH-317 TO EKBURJI ROAD ( LR-18 ) IN BLOCK RALEGAON DIST. YAVATMAL 5) UPGRADATION TO SH-317 TO LADKI ROAD ( LR-18 ) IN BLOCK RALEGAON DIST. YAVATMAL | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 100 | UPGRADATION TO WADKI TO PIMPLAPUR ROAD ( LR-15 ) IN BLOCK RALEGAON DIST. YAVATMAL | |||
| 2 | 100.1 | Bill No.1: Site Clearance, Dismantling and Earth Works | |||
| 3 | 101 | Cleaning grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201 (Item No. 2.1 / P.No. 8) | BI01010001010000000000000515BI0100001114 | 15800 | One Square Meter |
| 4 | 102 | Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical Specification Clause 301.4 (Item No. 3.20 / P.No. 13) | BI01010001010000000000000515BI0100001115 | 4905 | One Square Meter |
| 5 | 103 | Excavation for roadway in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportating to the embankent location with a lift upto 1.50 m. and lead upto 1000 m. as per Technical Specification Clause 302.3 (Item No. 3.5 (iii) / P.No. 14) | BI01010001010000000000000515BI0100001116 | 7287.7 | One Cubic Meter |
| 6 | 104 | Construction of embankment with approved materials with 95% P.D. deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification clause 301.5 for P.D.95% to 100% (Item No. 3.3 / P.No. 13) | BI01010001010000000000000515BI0100001117 | 7287.7 | One Cubic Meter |
| 7 | 105 | Construction of embankment with approved material with CBR of 5% obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading , grading to required slope and compacting and 95% P.D. to meet requirement of Tables 300.1 and 300.2 with a lead upto with all left & lead as per technical Specification Clause 301.5 (Item No. 3.4 / Page No. 13) | BI01010001010000000000000515BI0100001118 | 1662.39 | One Cubic Meter |
| 8 | 106 | Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 3.14/ P.No. 16) | BI01010001010000000000000515BI0100001119 | 894.79 | One Cubic Meter |
| 9 | 107 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 4.10 (A)/ P.No. 24) | BI01010001010000000000000515BI0100001120 | 1386.45 | One Cubic Meter |
| 10 | 108 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202. (Item No. 2.5 (I) (B) / P.No. 9) (I) Manual Means (B) Cement Concrete | BI01010001010000000000000515BI0100001121 | 66.03 | One Cubic Meter |
| 11 | 109 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantalling of Masnory Works as per Technical Specification Clause 202 (Item No. 2.13 / P.No. 10) A) Upto 600mm Ø Hume Pipe | BI01010001010000000000000515BI0100001122 | 45 | Per Runing Meter |
| 12 | 110 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) | BI01010001010000000000000515BI0100001123 | 383.73 | One Cubic Meter |
| 13 | 111 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) I) Ordinary soil i) UP TO 3.00 M DEPTH | BI01010001010000000000000515BI0100001124 | 186.02 | One Cubic Meter |
| 14 | 112 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. II) Ordinary rock (not requiring blasting) (Item No. 11.1 (II) / P.No. 48 ) | BI01010001010000000000000515BI0100001125 | 172.79 | One Cubic Meter |
| 15 | 113 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material Iv) Hard rock (blasting prohibited) Upto 3 m depth including 1.5 m depth in hard rock (Item No. 11.1 / P.No. 46) | BI01010001010000000000000515BI0100001126 | 68.47 | One Cubic Meter |
| 16 | 114 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (Item No. 11.1 A / P.No. 46) A1) For abutment | BI01010001010000000000000515BI0100001127 | 257.91 | One Cubic Meter |
| 17 | 115 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. A) For open Foudnation For pier (ii) for Normal Dewatering Item No. 11.1 A . | BI01010001010000000000000515BI0100001128 | 33.85 | One Cubic Meter |
| 18 | 116 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (ii) for Normal Dewatering for Return (Item No. 11.1 A . ) | BI01010001010000000000000515BI0100001129 | 135.52 | One Cubic Meter |
| 19 | 117 | Cutting of trees, including cutting of trunks, branches and removal of stumps and roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201 (Item No. 2.30 (ii) P.No.8) | BI01010001010000000000000515BI0100001130 | 2 | Per Number |
| 20 | 118 | Dismentaing of cement concrete pavement by mechanical means using pneumatic tools breaking to piece not exceeding 0.02 cum in volume and stock piling at designed locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unservisable materials separetly. as per Technical Specification Clause 202. (Item No. 2.15 / P.No. 10) Dismentaling of C.C. Pavement | BI01010001010000000000000515BI0100001131 | 117 | One Cubic Meter |
| 21 | 118.1 | Bill No.2: Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work | BI01010001010000000000000515BI0100001132 | ||
| 22 | 119 | Construction of granular sub-base by providing Grading-II material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Item No. 4.1 A(ii) / P.No. 19) By Mix in Place Method, (ii) For Grading-II Material | BI01010001010000000000000515BI0100001133 | 976.7 | One Cubic Meter |
| 23 | 120 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)B)/ P.No. 23) | BI01010001010000000000000515BI0100001134 | 2327.13 | One Cubic Meter |
| 24 | 121 | Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A)/ P.No. 28) (A) 50 mm Thick (Bitumen S-65) 60/70 - VG-30 | BI01010001010000000000000515BI0100001135 | 14766.8 | Per Square Meter |
| 25 | 122 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat) (I.No. 5.7 Case-II (i)/ P.No. 29) Case- II, By Mechanical Means I) Bitumen S-65 (VG-30) | BI01010001010000000000000515BI0100001136 | 14766.8 | Per Square Meter |
| 26 | 123 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Item.No. 5.2 (I)/ P.No. 27 (Above M.P.M.) | BI01010001010000000000000515BI0100001137 | 14766.8 | Per Square Meter |
| 27 | 124 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510 (Item No. 5.12 (Case-II) Type-B (I)/ P.No. 30) B) By Mechanical Means Case -II, Type B (I) Bitumen (S-65) VG-30 | BI01010001010000000000000515BI0100001138 | 14766.8 | Per Square Meter |
| 28 | 125 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel,edges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501(excluding dowel bars and Polythene sheet) and by adding Polypropelene Fibres at th rate 1.80 kg / cum (I.No.6.1/P.No. 34) | BI01010001010000000000000515BI0100001139 | 129.2 | One Cubic Meter |
| 29 | 125.1 | Bill No.3: Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works | BI01010001010000000000000515BI0100001140 | ||
| 30 | 126 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 600mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001141 | 80 | Per Runing Meter |
| 31 | 127 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 800mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001142 | 30 | Per Runing Meter |
| 32 | 128 | Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302 (Item No. 14.5 / P.No. 56) | BI01010001010000000000000515BI0100001143 | 257.27 | One Cubic Meter |
| 33 | 129 | Providing and laying filter material undermeath pitching in slopes complete as per drawing and Technical Specification Clause 1302 (Item No. 14.5 / P.No. 55) | BI01010001010000000000000515BI0100001144 | 7.55 | One Cubic Meter |
| 34 | 130 | Rubble filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (II) / P.No. 46) | BI01010001010000000000000515BI0100001145 | 79.14 | One Cubic Meter |
| 35 | 131 | Sand filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (I) / P.No. 46) | BI01010001010000000000000515BI0100001146 | 208.63 | One Cubic Meter |
| 36 | 132 | Providing random rubble masonry in cement morter 1:5 in construction of toe walls for protection of slopes as per drawings and technical specifications Clause 1302.5 (Item No. 14.10 (I)/ P.No. 57 ) | BI01010001010000000000000515BI0100001147 | 7.5 | One Cubic Meter |
| 37 | 133 | Providing concrete for plain cement concrete M-10 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (I) (i) / P.No. 47) I) PCC Grade M-10 (i) Nominal Mix 1:3:6 | BI01010001010000000000000515BI0100001148 | 100.67 | One Cubic Meter |
| 38 | 134 | Providing concrete for plain cement concrete M-15 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (II) (i) / P.No. 47 I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001149 | 94.73 | One Cubic Meter |
| 39 | 135 | Plain cement concrete Grade M-15 in substructure complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807, 1202 and 1204 (Item No. 12.5 (I) (i)/ P.No. 49) I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001150 | 434.21 | One Cubic Meter |
| 40 | 136 | Reinforced cement concrete Grade M-20 in foundation complete as per drawings and technical specifications Clause 802, 803, 1202 and 1203 (Item No. 11.4 (IV) / P.No. 46) | BI01010001010000000000000515BI0100001151 | 2.03 | One Cubic Meter |
| 41 | 137 | Providing and laying R.C.C. M-20 in substructure complete as per drawing and technical specifications Clauses 802, 804,805,806,807,1202 and 1204 (Item No. 12.5 (III) / P.No. 49) | BI01010001010000000000000515BI0100001152 | 15.67 | One Cubic Meter |
| 42 | 138 | Providing and laying reinforced cement concrete M-20 in superstructure as per drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (I) (i) / P.No. 52) I) RCC Grade M-20 (iii) For Design Mix | BI01010001010000000000000515BI0100001153 | 8.58 | One Cubic Meter |
| 43 | 139 | Providing and laying cement concrete wearing course M-30 grade excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 (Item No. 13.5 / P.No. 53) | BI01010001010000000000000515BI0100001154 | 36.89 | One Cubic Meter |
| 44 | 140 | Providing fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. complete (Rate as per PWD SSR 18-19 Item No. 27.13 / P.No. 247) | BI01010001010000000000000515BI0100001155 | 3.97 | One Cubic Meter |
| 45 | 141 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. (Rate as per PWD SSR 18-19 Item No. 32.11 / P.No. 261) | BI01010001010000000000000515BI0100001156 | 40.3 | One Square Meter |
| 46 | 142 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (b) P.V.C. pipe 100 mm dia ( Item No. 12.7 (b) / P.No. 51) | BI01010001010000000000000515BI0100001157 | 63 | Per Number |
| 47 | 143 | Providing Tar paper bearing of approved quality in proper size etc. complete (Rate as per PWD CSR 2017-18) (Item No.13.16 (V) / P.No. 54 ) | BI01010001010000000000000515BI0100001158 | 19.13 | One Square Meter |
| 48 | 144 | Providing and laying reinforced cement concrete M-25 in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (II) / P.No. 52 | BI01010001010000000000000515BI0100001159 | 59.64 | One Cubic Meter |
| 49 | 145 | Supplying, fitting and placing TMT bar reinforcement (Fe 500) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 ( Item No. 12.4 / P.No.49) | BI01010001010000000000000515BI0100001160 | 4.66 | Per Metric Tonne |
| 50 | 146 | Supplying fitting and placing TMT bar reinforcement in superstructure complete as per drawings and technical specification Clauses 1002, 1010 and 1202 (Item No. 13.3 / P.No. 52 | BI01010001010000000000000515BI0100001161 | 7.72 | Per Metric Tonne |
| 51 | 147 | Expansion joint with 25 mm thich bitumenous pad (Rate as per PWD CSR for 2017-18) (Item No.13.16 ( II) ( A) / P.No. 54 ) | BI01010001010000000000000515BI0100001162 | 39.03 | One Square Meter |
| 52 | 148 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 (Item No. 12.11 / P.No. 50 ) | BI01010001010000000000000515BI0100001163 | 78.37 | One Cubic Meter |
| 53 | 149 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 i) Granular Material (Item No. 12.10 (I) / P.No. 50 ) | BI01010001010000000000000515BI0100001164 | 82.93 | One Cubic Meter |
| 54 | 150 | Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x50) at 2.0 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 (Item No. 13.8 / P.No.53 ) | BI01010001010000000000000515BI0100001165 | 60.42 | Per Runing Meter |
| 55 | 151 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.3/ P.No. 37) 1000mm Ø ISNP NP 3 | BI01010001010000000000000515BI0100001166 | 37.5 | Per Runing Meter |
| 56 | 152 | Providing and fixing granite/ marble table of 15 mm to 18 mm thickness, including making goorve in wall / concrete surface filling joints with slurry, curing polishing, rounding edges, as required cleaning etc. complete of size and description as per detailed drawing including embossing and fitting in CM 1:2 border. (Item No. 12.15 / P.No.50) | BI01010001010000000000000515BI0100001167 | 1.5 | One Square Meter |
| 57 | 153 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701. (Item No. 10.5/ P.No.40) | BI01010001010000000000000515BI0100001168 | 688.9 | One Square Meter |
| 58 | 153.1 | Bill No.4: Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture | BI01010001010000000000000515BI0100001169 | ||
| 59 | 154 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Item No. 10.21 / P.No. 42) | BI01010001010000000000000515BI0100001170 | 2 | Per Number |
| 60 | 155 | MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.(Item No. 10.16 (A) / P.No. 42) | BI01010001010000000000000515BI0100001171 | 2 | Per Number |
| 61 | 156 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39) ii)600 mm equilateral triangle\n | BI01010001010000000000000515BI0100001172 | 66 | Per Number |
| 62 | 157 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39). (v) 800 mm X 600 mm rectangular ] | BI01010001010000000000000515BI0100001173 | 6 | Per Number |
| 63 | 158 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 SoR 10.7 | BI01010001010000000000000515BI0100001174 | 199.2 | One Square Meter |
| 64 | 159 | White washing two coats for brickwork including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Item No. 15.13 / P.No. 60) | BI01010001010000000000000515BI0100001175 | 178.96 | One Square Meter |
| 65 | 160 | Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) ii) Ordinary Km. Stone (Precast) | BI01010001010000000000000515BI0100001176 | 4 | Per Number |
| 66 | 161 | Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) iii) 200m Stone (Precast) | BI01010001010000000000000515BI0100001177 | 17 | Per Number |
| 67 | 162 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. (Item No. 10.11 / P.No. 40) | BI01010001010000000000000515BI0100001178 | 925 | Per Number |
| 68 | 163 | Providing & Constructing CC M-15 TBM Stone including excavation, CC M-10 for foundation, painting, lettering with MMGSY Logo, curing, finishing etc. complete. | BI01010001010000000000000515BI0100001179 | 8 | Per Number |
| 69 | 164 | Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001180 | 5 | Per Number |
| 70 | 165 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. (Item No. 10.24 / P.No. 43) | BI01010001010000000000000515BI0100001181 | 200 | Per Number |
| 71 | 166 | Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W \"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)\" ( Item No. 16.16 / P.No. 62)\n | BI01010001010000000000000515BI0100001182 | 10 | Per Runing Meter |
| 72 | 167 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No. 16.17 Page No. 62 ) | BI01010001010000000000000515BI0100001183 | 433 | Per Number |
| 73 | 200 | UPGRADATION TO SH-317 TO CHIKHANA ROAD ( LR-06 ) IN BLOCK RALEGAON DIST. YAVATMAL | BI01010001010000000000000515BI0100001184 | ||
| 74 | 200.1 | Bill No.1: Site Clearance, Dismantling and Earth Works | BI01010001010000000000000515BI0100001185 | ||
| 75 | 201 | Cleaning grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201 (Item No. 2.1 / P.No. 8) | BI01010001010000000000000515BI0100001186 | 10440 | One Square Meter |
| 76 | 202 | Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical Specification Clause 301.4 (Item No. 3.20 / P.No. 13) | BI01010001010000000000000515BI0100001187 | 1362 | One Square Meter |
| 77 | 203 | Excavation for roadway in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportating to the embankent location with a lift upto 1.50 m. and lead upto 1000 m. as per Technical Specification Clause 302.3 (Item No. 3.5 (iii) / P.No. 14) | BI01010001010000000000000515BI0100001188 | 4027.17 | One Cubic Meter |
| 78 | 204 | Construction of embankment with approved materials with 95% P.D. deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification clause 301.5 for P.D.95% to 100% (Item No. 3.3 / P.No. 13) | BI01010001010000000000000515BI0100001189 | 2013.58 | One Cubic Meter |
| 79 | 205 | Construction of embankment with approved material with CBR of 5% obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading , grading to required slope and compacting and 95% P.D. to meet requirement of Tables 300.1 and 300.2 with a lead upto with all left & lead as per technical Specification Clause 301.5 (Item No. 3.4 / Page No. 13) | BI01010001010000000000000515BI0100001190 | 268.12 | One Cubic Meter |
| 80 | 206 | Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 3.14/ P.No. 16) | BI01010001010000000000000515BI0100001191 | 329.66 | One Cubic Meter |
| 81 | 207 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 4.10 (A)/ P.No. 24) | BI01010001010000000000000515BI0100001192 | 801.2 | One Cubic Meter |
| 82 | 208 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) | BI01010001010000000000000515BI0100001193 | 233.03 | One Cubic Meter |
| 83 | 209 | Cutting of trees, including cutting of trunks, branches and removal of stumps and roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201 (Item No. 2.30 (ii) P.No.8) | BI01010001010000000000000515BI0100001194 | 3 | Per Number |
| 84 | 210 | Plantetion of tree allong road side inqluding 5 years of maintanance | BI01010001010000000000000515BI0100001195 | 15 | One Cubic Meter |
| 85 | 210.1 | Bill No.2: Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work | BI01010001010000000000000515BI0100001196 | ||
| 86 | 211 | Construction of granular sub-base by providing Grading-II material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Item No. 4.1 A(ii) / P.No. 19) By Mix in Place Method, (ii) For Grading-II Material | BI01010001010000000000000515BI0100001197 | 264.05 | One Cubic Meter |
| 87 | 212 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)B)/ P.No. 23) | BI01010001010000000000000515BI0100001198 | 1302.61 | One Cubic Meter |
| 88 | 213 | Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A)/ P.No. 28) (A) 50 mm Thick (Bitumen S-65) 60/70 - VG-30 | BI01010001010000000000000515BI0100001199 | 7896.6 | Per Square Meter |
| 89 | 214 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat) (I.No. 5.7 Case-II (i)/ P.No. 29) Case- II, By Mechanical Means I) Bitumen S-65 (VG-30) | BI01010001010000000000000515BI0100001200 | 11296.6 | Per Square Meter |
| 90 | 215 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Item.No. 5.2 (I)/ P.No. 27 (Above M.P.M.) | BI01010001010000000000000515BI0100001201 | 9596.6 | Per Square Meter |
| 91 | 216 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510 (Item No. 5.12 (Case-II) Type-B (I)/ P.No. 30) B) By Mechanical Means Case -II, Type B (I) Bitumen (S-65) VG-30 | BI01010001010000000000000515BI0100001202 | 12996.6 | Per Square Meter |
| 92 | 216.1 | Bill No.3: Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works | BI01010001010000000000000515BI0100001203 | ||
| 93 | 217 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 600mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001204 | 50 | Per Runing Meter |
| 94 | 218 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 800mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001205 | 15 | Per Runing Meter |
| 95 | 219 | Rubble filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (II) / P.No. 46) | BI01010001010000000000000515BI0100001206 | 53.03 | One Cubic Meter |
| 96 | 220 | Providing concrete for plain cement concrete M-10 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (I) (i) / P.No. 47) I) PCC Grade M-10 (i) Nominal Mix 1:3:6 | BI01010001010000000000000515BI0100001207 | 42.92 | One Cubic Meter |
| 97 | 221 | Providing concrete for plain cement concrete M-15 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (II) (i) / P.No. 47 I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001208 | 119.65 | One Cubic Meter |
| 98 | 222 | Providing and laying reinforced cement concrete M-20 in superstructure as per drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (I) (i) / P.No. 52) I) RCC Grade M-20 (iii) For Design Mix | BI01010001010000000000000515BI0100001209 | 4.37 | One Cubic Meter |
| 99 | 223 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (b) P.V.C. pipe 100 mm dia ( Item No. 12.7 (b) / P.No. 51) | BI01010001010000000000000515BI0100001210 | 22 | Per Number |
| 100 | 224 | Supplying fitting and placing TMT bar reinforcement in superstructure complete as per drawings and technical specification Clauses 1002, 1010 and 1202 (Item No. 13.3 / P.No. 52 | BI01010001010000000000000515BI0100001211 | 0.29 | Per Metric Tonne |
| 101 | 225 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.3/ P.No. 37) 1000mm Ø ISNP NP 3 | BI01010001010000000000000515BI0100001212 | 30 | Per Runing Meter |
| 102 | 225.1 | Bill No.4: Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture | BI01010001010000000000000515BI0100001213 | ||
| 103 | 226 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Item No. 10.21 / P.No. 42) | BI01010001010000000000000515BI0100001214 | 2 | Per Number |
| 104 | 227 | MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.(Item No. 10.16 (A) / P.No. 42) | BI01010001010000000000000515BI0100001215 | 2 | Per Number |
| 105 | 228 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39) ii)600 mm equilateral triangle\n | BI01010001010000000000000515BI0100001216 | 32 | Per Number |
| 106 | 229 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39). (v) 800 mm X 600 mm rectangular ] | BI01010001010000000000000515BI0100001217 | 6 | Per Number |
| 107 | 230 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 SoR 10.7 | BI01010001010000000000000515BI0100001218 | 87.08 | One Square Meter |
| 108 | 231 | White washing two coats for brickwork including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Item No. 15.13 / P.No. 60) | BI01010001010000000000000515BI0100001219 | 85.53 | One Square Meter |
| 109 | 232 | Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) ii) Ordinary Km. Stone (Precast) | BI01010001010000000000000515BI0100001220 | 3 | Per Number |
| 110 | 233 | Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) iii) 200m Stone (Precast) | BI01010001010000000000000515BI0100001221 | 10 | Per Number |
| 111 | 234 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. (Item No. 10.11 / P.No. 40) | BI01010001010000000000000515BI0100001222 | 263 | Per Number |
| 112 | 235 | Providing & Constructing CC M-15 TBM Stone including excavation, CC M-10 for foundation, painting, lettering with MMGSY Logo, curing, finishing etc. complete. | BI01010001010000000000000515BI0100001223 | 9 | Per Number |
| 113 | 236 | Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001224 | 2 | Per Number |
| 114 | 237 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. (Item No. 10.24 / P.No. 43) | BI01010001010000000000000515BI0100001225 | 94 | Per Number |
| 115 | 238 | Metal Beam Crash Barrier -- Type - A, W : Metal Beam Crash Barrier (Providing and erecting a W \"metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)\" ( Item No. 16.16 / P.No. 62)\n | BI01010001010000000000000515BI0100001226 | 10 | Per Runing Meter |
| 116 | 239 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No. 16.17 Page No. 62 ) | BI01010001010000000000000515BI0100001227 | 212 | Per Number |
| 117 | 300 | UPGRADATION TO ODR-109 TO CHIKHALI ROAD ( LR-27 ) IN BLOCK RALEGAON DIST. YAVATMAL | BI01010001010000000000000515BI0100001228 | ||
| 118 | 300.1 | Bill No.1: Site Clearance, Dismantling and Earth Works | BI01010001010000000000000515BI0100001229 | ||
| 119 | 301 | Cleaning grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201 (Item No. 2.1 / P.No. 8) | BI01010001010000000000000515BI0100001230 | 4560 | One Square Meter |
| 120 | 302 | Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical Specification Clause 301.4 (Item No. 3.20 / P.No. 13) | BI01010001010000000000000515BI0100001231 | 1710 | One Square Meter |
| 121 | 303 | Excavation for roadway in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportating to the embankent location with a lift upto 1.50 m. and lead upto 1000 m. as per Technical Specification Clause 302.3 (Item No. 3.5 (iii) / P.No. 14) | BI01010001010000000000000515BI0100001232 | 2945.67 | One Cubic Meter |
| 122 | 304 | Construction of embankment with approved materials with 95% P.D. deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification clause 301.5 for P.D.95% to 100% (Item No. 3.3 / P.No. 13) | BI01010001010000000000000515BI0100001233 | 2209.25 | One Cubic Meter |
| 123 | 305 | Construction of embankment with approved material with CBR of 5% obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading , grading to required slope and compacting and 95% P.D. to meet requirement of Tables 300.1 and 300.2 with a lead upto with all left & lead as per technical Specification Clause 301.5 (Item No. 3.4 / Page No. 13) | BI01010001010000000000000515BI0100001234 | 1598.25 | One Cubic Meter |
| 124 | 306 | Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 3.14/ P.No. 16) | BI01010001010000000000000515BI0100001235 | 292.14 | One Cubic Meter |
| 125 | 307 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 4.10 (A)/ P.No. 24) | BI01010001010000000000000515BI0100001236 | 396.3 | One Cubic Meter |
| 126 | 308 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) | BI01010001010000000000000515BI0100001237 | 323.58 | One Cubic Meter |
| 127 | 309 | Dismentaing of cement concrete pavement by mechanical means using pneumatic tools breaking to piece not exceeding 0.02 cum in volume and stock piling at designed locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unservisable materials separetly. as per Technical Specification Clause 202. (Item No. 2.15 / P.No. 10) Dismentaling of C.C. Pavement | BI01010001010000000000000515BI0100001238 | 90 | One Cubic Meter |
| 128 | 309.1 | Bill No.2: Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work | BI01010001010000000000000515BI0100001239 | ||
| 129 | 310 | Construction of granular sub-base by providing Grading-II material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Item No. 4.1 A(ii) / P.No. 19) By Mix in Place Method, (ii) For Grading-II Material | BI01010001010000000000000515BI0100001240 | 304.76 | One Cubic Meter |
| 130 | 311 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)B)/ P.No. 23) | BI01010001010000000000000515BI0100001241 | 737.81 | One Cubic Meter |
| 131 | 312 | Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A)/ P.No. 28) (A) 50 mm Thick (Bitumen S-65) 60/70 - VG-30 | BI01010001010000000000000515BI0100001242 | 3864.45 | Per Square Meter |
| 132 | 313 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat) (I.No. 5.7 Case-II (i)/ P.No. 29) Case- II, By Mechanical Means I) Bitumen S-65 (VG-30) | BI01010001010000000000000515BI0100001243 | 3864.45 | Per Square Meter |
| 133 | 314 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Item.No. 5.2 (I)/ P.No. 27 (Above M.P.M.) | BI01010001010000000000000515BI0100001244 | 3864.45 | Per Square Meter |
| 134 | 315 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510 (Item No. 5.12 (Case-II) Type-B (I)/ P.No. 30) B) By Mechanical Means Case -II, Type B (I) Bitumen (S-65) VG-30 | BI01010001010000000000000515BI0100001245 | 3864.45 | Per Square Meter |
| 135 | 316 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel,edges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501(excluding dowel bars and Polythene sheet) and by adding Polypropelene Fibres at th rate 1.80 kg / cum (I.No.6.1/P.No. 34) | BI01010001010000000000000515BI0100001246 | 144.59 | One Cubic Meter |
| 136 | 316.1 | Bill No.3: Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works | BI01010001010000000000000515BI0100001247 | ||
| 137 | 317 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 600mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001248 | 30 | Per Runing Meter |
| 138 | 318 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 800mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001249 | 15 | Per Runing Meter |
| 139 | 319 | Rubble filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (II) / P.No. 46) | BI01010001010000000000000515BI0100001250 | 52.5 | One Cubic Meter |
| 140 | 320 | Providing concrete for plain cement concrete M-10 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (I) (i) / P.No. 47) I) PCC Grade M-10 (i) Nominal Mix 1:3:6 | BI01010001010000000000000515BI0100001251 | 51.7 | One Cubic Meter |
| 141 | 321 | Providing concrete for plain cement concrete M-15 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (II) (i) / P.No. 47 I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001252 | 118.35 | One Cubic Meter |
| 142 | 322 | Providing and laying reinforced cement concrete M-20 in superstructure as per drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (I) (i) / P.No. 52) I) RCC Grade M-20 (iii) For Design Mix | BI01010001010000000000000515BI0100001253 | 12.02 | One Cubic Meter |
| 143 | 323 | Supplying fitting and placing TMT bar reinforcement in superstructure complete as per drawings and technical specification Clauses 1002, 1010 and 1202 (Item No. 13.3 / P.No. 52 | BI01010001010000000000000515BI0100001254 | 0.82 | Per Metric Tonne |
| 144 | 324 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.3/ P.No. 37) 1000mm Ø ISNP NP 3 | BI01010001010000000000000515BI0100001255 | 22.5 | Per Runing Meter |
| 145 | 324.1 | Bill No.4: Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture | BI01010001010000000000000515BI0100001256 | ||
| 146 | 325 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Item No. 10.21 / P.No. 42) | BI01010001010000000000000515BI0100001257 | 2 | Per Number |
| 147 | 326 | MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.(Item No. 10.16 (A) / P.No. 42) | BI01010001010000000000000515BI0100001258 | 2 | Per Number |
| 148 | 327 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39) ii)600 mm equilateral triangle\n | BI01010001010000000000000515BI0100001259 | 16 | Per Number |
| 149 | 328 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39). (v) 800 mm X 600 mm rectangular ] | BI01010001010000000000000515BI0100001260 | 6 | Per Number |
| 150 | 329 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 SoR 10.7 | BI01010001010000000000000515BI0100001261 | 73 | One Square Meter |
| 151 | 330 | White washing two coats for brickwork including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Item No. 15.13 / P.No. 60) | BI01010001010000000000000515BI0100001262 | 91.66 | One Square Meter |
| 152 | 331 | Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) ii) Ordinary Km. Stone (Precast) | BI01010001010000000000000515BI0100001263 | 1 | Per Number |
| 153 | 332 | Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) iii) 200m Stone (Precast) | BI01010001010000000000000515BI0100001264 | 6 | Per Number |
| 154 | 333 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. (Item No. 10.11 / P.No. 40) | BI01010001010000000000000515BI0100001265 | 125 | Per Number |
| 155 | 334 | Providing & Constructing CC M-15 TBM Stone including excavation, CC M-10 for foundation, painting, lettering with MMGSY Logo, curing, finishing etc. complete. | BI01010001010000000000000515BI0100001266 | 6 | Per Number |
| 156 | 335 | Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001267 | 1 | Per Number |
| 157 | 336 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. (Item No. 10.24 / P.No. 43) | BI01010001010000000000000515BI0100001268 | 50 | Per Number |
| 158 | 337 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No. 16.17 Page No. 62 ) | BI01010001010000000000000515BI0100001269 | 101 | Per Number |
| 159 | 400 | UPGRADATION TO SH-317 TO EKBURJI ROAD ( LR-18 ) IN BLOCK RALEGAON DIST. YAVATMAL | |||
| 160 | 400.1 | Bill No.1: Site Clearance, Dismantling and Earth Works | |||
| 161 | 401 | Cleaning grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201 (Item No. 2.1 / P.No. 8) | BI01010001010000000000000515BI0100001270 | 3520 | One Square Meter |
| 162 | 402 | Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical Specification Clause 301.4 (Item No. 3.20 / P.No. 13) | BI01010001010000000000000515BI0100001271 | 528 | One Square Meter |
| 163 | 403 | Excavation for roadway in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportating to the embankent location with a lift upto 1.50 m. and lead upto 1000 m. as per Technical Specification Clause 302.3 (Item No. 3.5 (iii) / P.No. 14) | BI01010001010000000000000515BI0100001272 | 1643.71 | One Cubic Meter |
| 164 | 404 | Construction of embankment with approved materials with 95% P.D. deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification clause 301.5 for P.D.95% to 100% (Item No. 3.3 / P.No. 13) | BI01010001010000000000000515BI0100001273 | 1232.78 | One Cubic Meter |
| 165 | 405 | Construction of embankment with approved material with CBR of 5% obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading , grading to required slope and compacting and 95% P.D. to meet requirement of Tables 300.1 and 300.2 with a lead upto with all left & lead as per technical Specification Clause 301.5 (Item No. 3.4 / Page No. 13) | BI01010001010000000000000515BI0100001274 | 625.82 | One Cubic Meter |
| 166 | 406 | Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 3.14/ P.No. 16) | BI01010001010000000000000515BI0100001275 | 700.32 | One Cubic Meter |
| 167 | 407 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 4.10 (A)/ P.No. 24) | BI01010001010000000000000515BI0100001276 | 258.6 | One Cubic Meter |
| 168 | 408 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) | BI01010001010000000000000515BI0100001277 | 169.68 | One Cubic Meter |
| 169 | 409 | Cutting of trees, including cutting of trunks, branches and removal of stumps and roots, refilling, compaction of backfilling and stacking of serviceable material by manual means with all lifts as per technical specification clause 201 (Item No. 2.30 (ii) P.No.8) | BI01010001010000000000000515BI0100001278 | 2 | Per Number |
| 170 | 410 | Plantetion of tree allong road side inqluding 5 years of maintanance | BI01010001010000000000000515BI0100001279 | 10 | Per Number |
| 171 | 410.1 | Bill No.2: Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work | BI01010001010000000000000515BI0100001280 | ||
| 172 | 411 | Construction of granular sub-base by providing Grading-II material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Item No. 4.1 A(ii) / P.No. 19) By Mix in Place Method, (ii) For Grading-II Material | BI01010001010000000000000515BI0100001281 | 279.86 | One Cubic Meter |
| 173 | 412 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)B)/ P.No. 23) | BI01010001010000000000000515BI0100001282 | 530.8 | One Cubic Meter |
| 174 | 413 | Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A)/ P.No. 28) (A) 50 mm Thick (Bitumen S-65) 60/70 - VG-30 | BI01010001010000000000000515BI0100001283 | 3364.12 | Per Square Meter |
| 175 | 414 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat) (I.No. 5.7 Case-II (i)/ P.No. 29) Case- II, By Mechanical Means I) Bitumen S-65 (VG-30) | BI01010001010000000000000515BI0100001284 | 3364.12 | Per Square Meter |
| 176 | 415 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Item.No. 5.2 (I)/ P.No. 27 (Above M.P.M.) | BI01010001010000000000000515BI0100001285 | 3364.12 | Per Square Meter |
| 177 | 416 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510 (Item No. 5.12 (Case-II) Type-B (I)/ P.No. 30) B) By Mechanical Means Case -II, Type B (I) Bitumen (S-65) VG-30 | BI01010001010000000000000515BI0100001286 | 3364.12 | Per Square Meter |
| 178 | 416.1 | Bill No.3: Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works | BI01010001010000000000000515BI0100001287 | ||
| 179 | 417 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 600mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001288 | 20 | Per Runing Meter |
| 180 | 418 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 800mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001289 | 10 | Per Runing Meter |
| 181 | 419 | Rubble filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (II) / P.No. 46) | BI01010001010000000000000515BI0100001290 | 21.89 | One Cubic Meter |
| 182 | 420 | Providing concrete for plain cement concrete M-10 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (I) (i) / P.No. 47) I) PCC Grade M-10 (i) Nominal Mix 1:3:6 | BI01010001010000000000000515BI0100001291 | 19.07 | One Cubic Meter |
| 183 | 421 | Plain cement concrete Grade M-15 in substructure complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807, 1202 and 1204 (Item No. 12.5 (I) (i)/ P.No. 49) I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001292 | 84.86 | One Cubic Meter |
| 184 | 422 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (b) P.V.C. pipe 100 mm dia ( Item No. 12.7 (b) / P.No. 51) | BI01010001010000000000000515BI0100001293 | 27 | Per Number |
| 185 | 423 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.3/ P.No. 37) 1000mm Ø ISNP NP 3 | BI01010001010000000000000515BI0100001294 | 7.5 | Per Runing Meter |
| 186 | 423.1 | Bill No.4: Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture | BI01010001010000000000000515BI0100001295 | ||
| 187 | 424 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Item No. 10.21 / P.No. 42) | BI01010001010000000000000515BI0100001296 | 1 | Per Number |
| 188 | 425 | MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.(Item No. 10.16 (A) / P.No. 42) | BI01010001010000000000000515BI0100001297 | 1 | Per Number |
| 189 | 426 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39) ii)600 mm equilateral triangle\n | BI01010001010000000000000515BI0100001298 | 12 | Per Number |
| 190 | 427 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39). (v) 800 mm X 600 mm rectangular ] | BI01010001010000000000000515BI0100001299 | 6 | Per Number |
| 191 | 428 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 SoR 10.7 | BI01010001010000000000000515BI0100001300 | 29.34 | One Square Meter |
| 192 | 429 | White washing two coats for brickwork including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Item No. 15.13 / P.No. 60) | BI01010001010000000000000515BI0100001301 | 34.53 | One Square Meter |
| 193 | 430 | Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) ii) Ordinary Km. Stone (Precast) | BI01010001010000000000000515BI0100001302 | 2 | Per Number |
| 194 | 431 | Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) iii) 200m Stone (Precast) | BI01010001010000000000000515BI0100001303 | 3 | Per Number |
| 195 | 432 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. (Item No. 10.11 / P.No. 40) | BI01010001010000000000000515BI0100001304 | 72 | Per Number |
| 196 | 433 | Providing & Constructing CC M-15 TBM Stone including excavation, CC M-10 for foundation, painting, lettering with MMGSY Logo, curing, finishing etc. complete. | BI01010001010000000000000515BI0100001305 | 4 | Per Number |
| 197 | 434 | Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001306 | 2 | Per Number |
| 198 | 435 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. (Item No. 10.24 / P.No. 43) | BI01010001010000000000000515BI0100001307 | 44 | Per Number |
| 199 | 436 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No. 16.17 Page No. 62 ) | BI01010001010000000000000515BI0100001308 | 112 | Per Number |
| 200 | 500 | UPGRADATION TO SH-317 TO LADKI ROAD ( LR-18 ) IN BLOCK RALEGAON DIST. YAVATMAL | |||
| 201 | 500.1 | Bill No.1: Site Clearance, Dismantling and Earth Works | |||
| 202 | 501 | Cleaning grass and removal of rubbish up to a distance of 30m outside the periphery of the area as per Technical Specification Clause 201 (Item No. 2.1 / P.No. 8) | BI01010001010000000000000515BI0100001309 | 2160 | One Square Meter |
| 203 | 502 | Scarifying the existing bituminous road surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000m as per Technical Specification Clause 301.4 (Item No. 3.20 / P.No. 13) | BI01010001010000000000000515BI0100001310 | 1080 | One Square Meter |
| 204 | 503 | Excavation for roadway in soil with hydraulic excavator of 0.90 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transportating to the embankent location with a lift upto 1.50 m. and lead upto 1000 m. as per Technical Specification Clause 302.3 (Item No. 3.5 (iii) / P.No. 14) | BI01010001010000000000000515BI0100001311 | 1428.2 | One Cubic Meter |
| 205 | 504 | Construction of embankment with approved materials with 95% P.D. deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Table 300.1 and 300.2 as per technical specification clause 301.5 for P.D.95% to 100% (Item No. 3.3 / P.No. 13) | BI01010001010000000000000515BI0100001312 | 1071.15 | One Cubic Meter |
| 206 | 505 | Construction of embankment with approved material with CBR of 5% obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading , grading to required slope and compacting and 95% P.D. to meet requirement of Tables 300.1 and 300.2 with a lead upto with all left & lead as per technical Specification Clause 301.5 (Item No. 3.4 / Page No. 13) | BI01010001010000000000000515BI0100001313 | 821.35 | One Cubic Meter |
| 207 | 506 | Construction of subgrade with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 3.14/ P.No. 16) | BI01010001010000000000000515BI0100001314 | 116.99 | One Cubic Meter |
| 208 | 507 | Construction of earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting with vibratory roller to meet requirement of Table 300.2 with lead upto 1000m as per Technical Specification Clause 303.1 (Item No. 4.10 (A)/ P.No. 24) | BI01010001010000000000000515BI0100001315 | 233.6 | One Cubic Meter |
| 209 | 508 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000m as per Technical Specification Clause 202. (Item No. 2.5 (I) (B) / P.No. 9) (I) Manual Means (B) Cement Concrete | BI01010001010000000000000515BI0100001316 | 50.66 | One Cubic Meter |
| 210 | 509 | Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantalling of Masnory Works as per Technical Specification Clause 202 (Item No. 2.13 / P.No. 10) A) Upto 600mm Ø Hume Pipe | BI01010001010000000000000515BI0100001317 | 57.4 | Per Runing Meter |
| 211 | 510 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) | BI01010001010000000000000515BI0100001318 | 102.5 | One Cubic Meter |
| 212 | 511 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. (Item No. 11.1 / P.No. 45) I) Ordinary soil i) UP TO 3.00 M DEPTH | BI01010001010000000000000515BI0100001319 | 233.6 | One Cubic Meter |
| 213 | 512 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. II) Ordinary rock (not requiring blasting) (Item No. 11.1 (II) / P.No. 48 ) | BI01010001010000000000000515BI0100001320 | 137.05 | One Cubic Meter |
| 214 | 513 | Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material Iv) Hard rock (blasting prohibited) Upto 3 m depth including 1.5 m depth in hard rock (Item No. 11.1 / P.No. 46) | BI01010001010000000000000515BI0100001321 | 31.45 | One Cubic Meter |
| 215 | 514 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (Item No. 11.1 A / P.No. 46) A1) For abutment | BI01010001010000000000000515BI0100001322 | 203.7 | One Cubic Meter |
| 216 | 515 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. A) For open Foudnation For pier (ii) for Normal Dewatering Item No. 11.1 A . | BI01010001010000000000000515BI0100001323 | 90.92 | One Cubic Meter |
| 217 | 516 | Dewatering including diversion of stream, providing cofferdams, bunds, etc. as may be necessary for foundation and other parts of the work and bailing out water during and after excavation as required. (ii) for Normal Dewatering for Return (Item No. 11.1 A . ) | BI01010001010000000000000515BI0100001324 | 107.48 | One Cubic Meter |
| 218 | 516.1 | Bill No.2: Pavement Works (GSB, WBM, Bituminous Works) and Cement Concrete Pavement Work | BI01010001010000000000000515BI0100001325 | ||
| 219 | 517 | Construction of granular sub-base by providing Grading-II material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Item No. 4.1 A(ii) / P.No. 19) By Mix in Place Method, (ii) For Grading-II Material | BI01010001010000000000000515BI0100001326 | 153.05 | One Cubic Meter |
| 220 | 518 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405. (Item No. 4.8 (2)B)/ P.No. 23) | BI01010001010000000000000515BI0100001327 | 259.06 | One Cubic Meter |
| 221 | 519 | Construction of 50 mm thick Modified Penetration Macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506. (Item No. 5.5 (A)/ P.No. 28) (A) 50 mm Thick (Bitumen S-65) 60/70 - VG-30 | BI01010001010000000000000515BI0100001328 | 2655.08 | Per Square Meter |
| 222 | 520 | Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat as per Technical Specification Clause 508. (excluding seal coat) (I.No. 5.7 Case-II (i)/ P.No. 29) Case- II, By Mechanical Means I) Bitumen S-65 (VG-30) | BI01010001010000000000000515BI0100001329 | 2160 | Per Square Meter |
| 223 | 521 | Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg / sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 (Item.No. 5.2 (I)/ P.No. 27 (Above M.P.M.) | BI01010001010000000000000515BI0100001330 | 2160 | Per Square Meter |
| 224 | 522 | Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B, as per Technical Specification Clause 510 (Item No. 5.12 (Case-II) Type-B (I)/ P.No. 30) B) By Mechanical Means Case -II, Type B (I) Bitumen (S-65) VG-30 | BI01010001010000000000000515BI0100001331 | 2160 | Per Square Meter |
| 225 | 522.1 | Bill No.3: Cross Drainage Structures (Culverts & Minor Bridges), Drains and Protection Works | BI01010001010000000000000515BI0100001332 | ||
| 226 | 523 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 600mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001333 | 20 | Per Runing Meter |
| 227 | 524 | Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.4/ P.No. 37) 800mm Ø ISNP NP 2 | BI01010001010000000000000515BI0100001334 | 7.5 | Per Runing Meter |
| 228 | 525 | Rubble filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (II) / P.No. 46) | BI01010001010000000000000515BI0100001335 | 3.64 | One Cubic Meter |
| 229 | 526 | Sand filling in foundation trenches as per drawing and Technical Specification Clause 305.3.9 (Item No. 11.2 (I) / P.No. 46) | BI01010001010000000000000515BI0100001336 | 294.72 | One Cubic Meter |
| 230 | 527 | Providing concrete for plain cement concrete M-10 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (I) (i) / P.No. 47) I) PCC Grade M-10 (i) Nominal Mix 1:3:6 | BI01010001010000000000000515BI0100001337 | 75.75 | One Cubic Meter |
| 231 | 528 | Providing concrete for plain cement concrete M-15 in foundations complete as per drawings and Technical Specification Clauses 802, 803, 1202 and 1203. (Item No. 11.4 (II) (i) / P.No. 47 I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001338 | 109.69 | One Cubic Meter |
| 232 | 529 | Plain cement concrete Grade M-15 in substructure complete as per drawings and technical specifications Clause 802, 804, 805, 806, 807, 1202 and 1204 (Item No. 12.5 (I) (i)/ P.No. 49) I) PCC Grade M-15 (i) Nominal Mix 1:2.5:5 ) | BI01010001010000000000000515BI0100001339 | 309.73 | One Cubic Meter |
| 233 | 530 | Providing and laying R.C.C. M-20 in substructure complete as per drawing and technical specifications Clauses 802, 804,805,806,807,1202 and 1204 (Item No. 12.5 (III) / P.No. 49) | BI01010001010000000000000515BI0100001340 | 9.86 | One Cubic Meter |
| 234 | 531 | Providing and laying reinforced cement concrete M-20 in superstructure as per drawing and Technical Specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (I) (i) / P.No. 52) I) RCC Grade M-20 (iii) For Design Mix | BI01010001010000000000000515BI0100001341 | 3.92 | One Cubic Meter |
| 235 | 532 | Providing and laying cement concrete wearing course M-30 grade excluding reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3 (Item No. 13.5 / P.No. 53) | BI01010001010000000000000515BI0100001342 | 8.44 | One Cubic Meter |
| 236 | 533 | Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 (b) P.V.C. pipe 100 mm dia ( Item No. 12.7 (b) / P.No. 51) | BI01010001010000000000000515BI0100001343 | 62 | Per Number |
| 237 | 534 | Providing Tar paper bearing of approved quality in proper size etc. complete (Rate as per PWD CSR 2017-18) (Item No.13.16 (V) / P.No. 54 ) | BI01010001010000000000000515BI0100001344 | 18 | One Square Meter |
| 238 | 535 | Providing and laying reinforced cement concrete M-25 in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 (Item No. 13.1 (II) / P.No. 52 | BI01010001010000000000000515BI0100001345 | 52.91 | One Cubic Meter |
| 239 | 536 | Supplying, fitting and placing TMT bar reinforcement (Fe 500) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 ( Item No. 12.4 / P.No.49) | BI01010001010000000000000515BI0100001346 | 4.69 | Per Metric Tonne |
| 240 | 537 | Supplying fitting and placing TMT bar reinforcement in superstructure complete as per drawings and technical specification Clauses 1002, 1010 and 1202 (Item No. 13.3 / P.No. 52 | BI01010001010000000000000515BI0100001347 | 5.58 | Per Metric Tonne |
| 241 | 538 | Expansion joint with 25 mm thich bitumenous pad (Rate as per PWD CSR for 2017-18) (Item No.13.16 ( II) ( A) / P.No. 54 ) | BI01010001010000000000000515BI0100001348 | 34.15 | One Square Meter |
| 242 | 539 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specification Clause 1204.3.8 (Item No. 12.11 / P.No. 50 ) | BI01010001010000000000000515BI0100001349 | 57.23 | One Cubic Meter |
| 243 | 540 | Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 i) Granular Material (Item No. 12.10 (I) / P.No. 50 ) | BI01010001010000000000000515BI0100001350 | 84.75 | One Cubic Meter |
| 244 | 541 | Providing and fixing in position pipe railing consisting of IS Rolled steel joist posts designation IS MB 100 (100x50) at 2.0 m interval and three rows of 50 mm dia steel pipes (light) including fixing in position on bridge deck complete as per drawing and technical specifications Clause 1208.2 (Item No. 13.8 / P.No.53 ) | BI01010001010000000000000515BI0100001351 | 50.14 | Per Runing Meter |
| 245 | 542 | Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material and single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets. Clause 1106. (Item No. 9.3/ P.No. 37) 1000mm Ø ISNP NP 3 | BI01010001010000000000000515BI0100001352 | 7.5 | Per Runing Meter |
| 246 | 543 | Providing and fixing granite/ marble table of 15 mm to 18 mm thickness, including making goorve in wall / concrete surface filling joints with slurry, curing polishing, rounding edges, as required cleaning etc. complete of size and description as per detailed drawing including embossing and fitting in CM 1:2 border. (Item No. 12.15 / P.No.50) | BI01010001010000000000000515BI0100001353 | 0.75 | One Square Meter |
| 247 | 544 | Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701. (Item No. 10.5/ P.No.40) | BI01010001010000000000000515BI0100001354 | 579.41 | One Square Meter |
| 248 | 544.1 | Bill No.4: Traffic Signs, Markings and Road Appurtenances, Road Safety & Road Furniture | BI01010001010000000000000515BI0100001355 | ||
| 249 | 545 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75mm x 75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (Item No. 10.21 / P.No. 42) | BI01010001010000000000000515BI0100001356 | 1 | Per Number |
| 250 | 546 | MMGSY / PMGSY Citizen' s information Board- Providing and fixing of typical PMGSY Retro Reflective information board as per as per section1700 of MORD specifications and latest PMGSY Signage Manual / Circuler and drawing.Two ACP (Aluminum Composite Panel) sheets of 4 mm thick, of 900 mm x 750mm size fixed at top & bottom duly rivetted with MS angles of 35 x 35 x 5 mm thick M.S angle shall be welded by two vertical M.S angle of 5 mm thick to 75 mm x 75 mm of 12 SWG square tubes / 75mm Dia Pipe posts duly embedded in cement concrete M-20 grade blocks of 600mm x 600mm x 75mm, below ground level. MMGSY / PMGSY logo, letters and numerals on the ACP should be made up of Retro Reflective sheeting of Class-A / Class-B grade as per the latest MORD section 1700 specifications (Refer Circuler no. NRRDA-P013(11)/3/2019-Dir (Tech) dated 02.12.2019). Printing PMGSY Logo/MMGSY Logo/Project description on Class A or Class B type retro reflective sheeting using modern technology printing platform. The printer shall be approved by the retro reflective sheeting manufacturer and printed sign shall conform to retro reflective values as laid down in IRC 67-2012. The inks used for printing shall be eco friendly with VOC emissions complying to UL 2801 standards and specifications for the different kinds of platforms. The printed sign shall be laminated by UV protected laminate and shall carry a warranty of 5 years & 7 years for Class A and Class B sheeting respectively for traffic colors. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paints as per drawing Clause 1701 and Annexure 1700.1 (10.16). The design, painting and lettering shall be done as per the PMGSY Signage Guidelines Fig.3 and Fig.4 and as directed by Engineer-In-charge. . A warranty for 5 / 7 years for the Retro reflective sheeting for Class-A and Class-B respectively, from original manufacturer shall be submitted by contractor.(Item No. 10.16 (A) / P.No. 42) | BI01010001010000000000000515BI0100001357 | 1 | Per Number |
| 251 | 547 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39) ii)600 mm equilateral triangle\n | BI01010001010000000000000515BI0100001358 | 12 | Per Number |
| 252 | 548 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Item No. 10.2 B / P.No. 39). (v) 800 mm X 600 mm rectangular ] | BI01010001010000000000000515BI0100001359 | 3 | Per Number |
| 253 | 549 | Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 SoR 10.7 | BI01010001010000000000000515BI0100001360 | 85.24 | One Square Meter |
| 254 | 550 | White washing two coats for brickwork including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (Item No. 15.13 / P.No. 60) | BI01010001010000000000000515BI0100001361 | 51.32 | One Square Meter |
| 255 | 551 | Reinforced cement concrete M-15 grade Ordinary Kilometer Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) ii) Ordinary Km. Stone (Precast) | BI01010001010000000000000515BI0100001362 | 1 | Per Number |
| 256 | 552 | Reinforced cement concrete M-15 grade 200m Stone (Precast) of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. (I.No. 10.10 (ii) / P.No. 43) iii) 200m Stone (Precast) | BI01010001010000000000000515BI0100001363 | 4 | Per Number |
| 257 | 553 | Reinforced cement concrete M-15 grade Boundary Pillar/ Local Stone of standard design as per IRC: 25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704. (Item No. 10.11 / P.No. 40) | BI01010001010000000000000515BI0100001364 | 65 | Per Number |
| 258 | 554 | Providing & Constructing CC M-15 TBM Stone including excavation, CC M-10 for foundation, painting, lettering with MMGSY Logo, curing, finishing etc. complete. | BI01010001010000000000000515BI0100001365 | 2 | Per Number |
| 259 | 555 | Construction of Rounded Hump Type Speed Breaker as per IRC : 99 (1988) for general traffic as per specification, including painting, fixing cautionery boards etc. complete and as directed by Engineer-in-Charge. | BI01010001010000000000000515BI0100001366 | 4 | Per Number |
| 260 | 556 | STANDARD METAL DELINEATOR Supply and Installation of Road delienators ( Road way Delienators ) as per MORT&H clause 806.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground, width not less than 100 mm and shall extend not more than 300mm below the ground while being installed in confirmation with IRC:79 1981or as directed by engineer in charge.The delineator shall be painted with powder coat of minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting shall be pasted on both sides. The delienator shall consist minimum retro reflective unit exposed area of 330 cm2 white color, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI table specification.The front and back faces of the delineator should be curved with a radius of not more than 200 mm and with delta angle (or central angle of curve) lying between 20o and 30o, to increase the visibility of the delineator for vehicles moving in continuous curves. The delineator shall have grooves across the length to make the reflective sheets vandal-proof. (Item No. 10.24 / P.No. 43) | BI01010001010000000000000515BI0100001367 | 45 | Per Number |
| 261 | 557 | Providing and erecting 1.5 metre high wire fencing with seven rows of barbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5 Metres, Center to center including excavating pits for foundqtion, fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fastening the wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. ( PWD SOR Item No. 44.09)\n | BI01010001010000000000000515BI0100001368 | 20 | Per Runing Meter |
| 262 | 558 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. ( Item No. 16.17 Page No. 62 ) | BI01010001010000000000000515BI0100001369 | 46 | Per Number |
AI Tender Summary
Tender Timeline
Oct 22, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender