Improvement Of Smashanbhumi Shed At Bhuinj Tal-Wai
Tender Value
3.04 Lakhs
Estimated cost
Bid Submission
29 Oct 2020
0 days left
EMD
3045
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
IMPROVEMENT OF SMASHANBHUMI SHED AT BHUINJ TAL-WAI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Smashanbhumi Shed At Bhuinj Tal-Wai
BOQ
| Name of Work : IMPROVEMENT OF SMASHANBHUMI SHED AT BHUINJ TAL-WAI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in hard murum including removing the excavated materials beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting for all leads and lifts excetra complete.\nItem / Page No : 8 / 197\nSpecification No : Bd.A.2\nSpec. Page No : 259\n | BI01010001010000000000000515BI0100001112 | 3.07 | Cubic Metre |
| 2 | 3 | Excavation for foundation in hard rock by chiselling wedging, line drilling excetra including trimming and levelling the bed, removing the excavated materials beyond the building area and stacking as directed, dewatering and back filling with available earth / murum, ramming, watering and for all leads and lifts complete.\nItem / Page No : 20 / 199\nSpecification No : Bd.A.6\nSpec. Page No : 260\n | BI01010001010000000000000515BI0100001114 | 16.46 | Cubic Metre |
| 3 | 4 | Providing and laying Cast in situ/Ready Mix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailling out water, formwork,laying/pumping, compacting and curing excetra complete, with fully automatic micro processor based Programmable Logic Control with Supervisory Control and Data Acquisition enabled reversible Drum Type mixer. - With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\nItem / Page No : 1 / 226\nSpecification No : Bd.E.1\nSpec. Page No : 287-288\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001115 | 7.04 | Cubic Metre |
| 4 | 5 | Providing and laying Cast in situ / Ready Mix cement concrete M-15 of trap / granite / quartzite / gneiss metal for steps including steel centering, plywood / steel formwork, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin, excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor)\nItem / Page No : 4 / 226\nSpecification No : Bd.E.2, B-7\nSpec. Page No : 288, 38-40\nAdditional Specifications : With additional specifications for controlled concrete. | BI01010001010000000000000515BI0100001116 | 27.49 | Cubic Metre |
| 5 | 6 | Filling in plinth and floors with approved excavated materials in 15 centimetre to 20 centimetre layers including watering and compacting, excetra complete.\nItem / Page No : 36 / 201\nSpecification No : Bd.A.10\nSpec. Page No : 262-263\n | BI01010001010000000000000515BI0100001117 | 9.21 | Cubic Metre |
| 6 | 7 | Filling in plinth and floors with contractors material / brought from outside and approved by Engineer In-Charge, in 15 centimetre to 20 centimetre layers including watering and compation excetra complete.\nItem / Page No : 37 / 201\nSpecification No : Bd.A.11\nSpec. Page No : 263-264\n | BI01010001010000000000000515BI0100001118 | 11 | Cubic Metre |
| 7 | 8 | Providing and laying cement concrete pipe confirming to Indian Standard 458:2003 non pressure class-2 of 450 milimetre diameter in proper line, level and slope including providng and fixing collars in cement mortar 1:2 and curing, excetra complete.\nItem / Page No : 8 / 103\nSpecification No : CD.7\nSpec. Page No : 162\n | BI01010001010000000000000515BI0100001119 | 5 | Running Metre |
| 8 | 9 | Providing and fixing heavy duty inter locking concrete coloured paving blocks of 60 milimetre thickness of having a strength of 300 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and cleaning, excetra complete.\nItem / Page No : 51 / 280\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001120 | 75.24 | Square Metre |
| 9 | 10 | Royalty charges for various building construction bonafied materials which are used for government bonafied works and for which Royalty charges are to be paid by the contractor.\nItem / Page No : 3 / 0\nAdditional Specifications : 1. Government of Maharashtra, Revenue and Forest Department Gazette Number 67 Dated 15-5-2015 and Government of Maharashtra Public Works Department State Schedule of Rates 2017-18 General Note Number 4.3. 2. Above / below percentage quoted by the contractor will not be applicable for this item. | BI01010001010000000000000515BI0100001121 | 15.33 | Cubic Metre |
| 10 | 11.01 | Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.\nItem / Page No : 4 / 0\nAdditional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.Compressive Strength of Cement Concrete Cube\n1 Test for quantity upto 5 cubic metre, 2 Tests for quantity above 5 cubic metre and upto 15 cubic metre, 3 Tests for quantity above 15 cubic metre and upto 30 cubic metre, 4 Tests for quantity above 30 cubic metre and upto 50 cubic metre. For quantity 50 cubic metre and above - 4 Tests + 1 Test for each additional 50 cubic metre | BI01010001010000000000000515BI0100001122 | 1 | Number |
| 11 | 11.02 | Compressive Strength, Water Absorption, Flexural Test, Resitance to wear Test for Paving Blocks - 60 milimetre thick, 300 Kilogram per Square Centimetre Strength\n1 Test per Square Metre | BI01010001010000000000000515BI0100001123 | 1 | Number |
| 12 | 12 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m X 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols excetra with approved colour shade paint complete, on M.S.angle of size 35 X 35 X 3 milimetre frame with properly cross braced mild steel angles of size 35mmx35mmx3mm duly painted including Two mild steel angle iron posts of size 65 milimetre X 65 milimetre X 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre X 60 centimetre X 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. number As directed by Engineer in Charge\nItem / Page No : 36 / 73\nSpecification No : MoRTH-801\nSpec. Page No : ---\nAdditional Specifications : The work shall be carried out as per instructions of Engineer in charge. | BI01010001010000000000000515BI0100001124 | 1 | Number |
AI Tender Summary
Tender Timeline
Oct 22, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 02, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender