| 1 | 1 | PART-A : OPERATION & MAINTENANCE | item1 | | |
|---|
| 2 | 1.01 | Daily Operation & maintenance of electrical installations at community centre at sector-12, crematorium at sector- 14 & 26 Kharghar with inspection cleaning, testing, preventive checks of control pillars and recording the reading of meter, reporting and submitting same as per the directives of the department. i) Appointing technical man-power for daily operation & maintenance of Nodal offices / area lights. ii) Co-ordination with various departments/ statutory bodies for monitoring the progress of the work. iii) Co-ordination and follow up with MSEDCL authority and CIDCO departments for payment of energy bills in time. iv) Co-ordination and follow-up with MSEDCL for monitoring power supply to offices.\ni) Electrician - 1 nos. (in general shift i.e. 1 Electrician per day)\nii) Helper - 1 no. (in general shift i.e. 1 Helper per day) | item2 | 365 | Day |
|---|
| 3 | 2 | PART-B : REPAIRS | item3 | | |
|---|
| 4 | 2.01 | Point wiring for light/fan/bell with ISI mark 2x1 sq.mm copper PVC insulated & PVC sheathed wire 1.1 KV grade in PVC trunking (PVC casing N - capping) with double locking arrangement with grooves trunking of not below 12.5 mm in height and 20mm in width and the thickness not below 1.2 mm as per IS 14927 (part-1) 2001 and with accessories of PVC/Virgin polypropylene not below 1.8 mm in thickness duly embossed the name of the manufacturer on casing capping and on accessoriess duly sealed at joints & erected the trucking (casing-n-capping) on wall/ ceiling with necessary nettle folded G.I screws etc. fixed at an interval of not more than 500mm with Rawi plugs etc. and ISI mark ceiling rose/batten /holder /slanting holder erected on PVC /Virgan poly propylene accessories with ISI mark porcelain base 6 A.T Switch /pioner switch / bell push erected on 3 mm thick hylam sheet with round headed brass screws and cup washers complete. | item4 | 15 | Point |
|---|
| 5 | 2.02 | Point wiring for independent plug with ISI mark 2x4 + (2.5) sq.mm copper PVC insulated & PVC sheathed wire 1.1 KV grade in PVC trunking (PVC casing N - capping) with double locking arrangement with grooves trunking of not below 12.5 mm in height and 20mm in width and the thickness not below 1.2 mm as per IS 14927 (part-1) 2001 and with accessories of PVC/Virgin polypropylene not below 1.8 mm in thickness duly embossed the name of the manufacturer on casing capping and on accessories duly sealed at joints & erected the trucking (casing-n-capping) on wall/ ceiling with necessary nettle folded G.I screws etc. fixed at an interval of not more than 500mm with Rawi plugs etc. and ISI mark ceiling rose/batten /holder /slanting holder erected on PVC /Virgan poly propylene accessories with ISI mark porcelain base 16 A .T Switch /pioner switch / bell push erected on 3 mm thick hylam sheet with round headed brass screws and cup washers complete. | item5 | 5 | Point |
|---|
| 6 | 2.03 | Supplying and erecting ceiling fan with double ball bearings and with condensor AC 230V 50 cys. of 1200 mm. Sweep complete erected in position in necessary flexible copper leads of required colour and regulator canopy and down rod upto 300mm. in length in provided hook or clamps nuts and bolts etc. and marking Sr.No. and date of erection. | item6 | 5 | No |
|---|
| 7 | 2.04 | Supplying & erecting electronic type 600W dimer/ speed controller complete erected on provided switch board. | item7 | 10 | No |
|---|
| 8 | 2.05 | Supplying & erecting flush type shockproof plug socket 6A & 16A (6pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board. | item8 | 25 | No |
|---|
| 9 | 2.06 | Supplying & erecting double PVC copper wire of size 3 x 2.5 sq.mm. PVC stranded copper wire between terminal box & fitting. | item9 | 200 | Mtr. |
|---|
| 10 | 2.07 | Supplying & erecting mains with 3 X 4 Sq.mm. FRLS stranded copper PVC insulated wire laid in provided conduit /trunking /inside pole/ Bus bar or any other places. | item10 | 200 | Mtr. |
|---|
| 11 | 2.08 | Supplying & erecting double PVC copper wire of size 2 x 2.5 sq.mm. PVC stranded copper wire between terminal box & fitting. | item11 | 200 | Mtr. |
|---|
| 12 | 2.09 | Supplying & erecting double PVC copper wire of size 2 x 1.5 sq.mm. PVC stranded copper wire between terminal box & fitting. | item12 | 200 | Mtr. |
|---|
| 13 | 2.1 | Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete. | item13 | 10 | No. |
|---|
| 14 | 2.11 | Supplying and erecting square / rectangular shaped CRCA /die cast aluminium powder coated housing LED panel (slim edge-lit) light suitable for 25 to 32W with provision for plane front frame with translucent cover fixed to the housing complete. | item14 | 5 | No |
|---|
| 15 | 2.12 | Supplying and erecting LED flood light fitting of 70- 80W, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2 | item15 | 5 | No. |
|---|
| 16 | 2.13 | Supplying and erecting LED street light fitting suitable for above75W - 90W lamp, including lamp, with PF > 0.95, class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No. FGODF/FLS2. | item16 | 5 | No. |
|---|
| 17 | 2.14 | Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No .FG-ODF/FLS2. | item17 | 5 | No. |
|---|
| 18 | 2.15 | Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FG-ODF/PTL | item18 | 2 | No |
|---|
| 19 | 2.16 | Supplying and erecting electronic type driver for indoor LED upto 10W-18W fixtures suitable to operate on 230V A.C. 50 Hz. Having PF >0.95 and THD<10%. | item19 | 10 | No. |
|---|
| 20 | 2.17 | Supplying and erecting electronic type driver for indoor LED upto 25W-40W fixtures suitable to operate on 230V A.C. 50 Hz. Having PF >0.95 and THD<10%. | item20 | 10 | No. |
|---|
| 21 | 2.18 | Supplying and erecting electronic type Driver for Outdoor LED fittings upto 46W-75W suitable to operate on 230V A.C. 50 Hz. having pf>0.95 and THD<10%. | item21 | 10 | No. |
|---|
| 22 | 2.19 | Supplying and erecting electronic type Driver for Outdoor LED fittings upto 76W-100W suitable to operate on 230V A.C. 50 Hz. having pf>0.95 and THD<10%. | item22 | 8 | No. |
|---|
| 23 | 2.2 | Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base. | item23 | 4 | No. |
|---|
| 24 | 2.21 | Supplying & erecting FRP box of size 250 X 200 X 100 mm., 4 mm thick permanent gray colour with 15 Amps 250 Volts porcelain base kitkat fuse and top with bakelite connector strip 4 way having locking arrangement with lock and key with arrangements for incoming & outing cables at bottom of the box & outgoing wire leads at the rear side provided with necessary fixing arrangement for the erection on the poles suitable size clamps provided with nuts bolts & washers etc. complete. | item24 | 15 | No. |
|---|
| 25 | 2.22 | Rewinding motor of the 1200/1400 mm ceiling fan and over hauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year. | item25 | 8 | No. |
|---|
