Maintenance Of Electrical Installation Fans Including Compound Lights Dg Set And Substation Wetriser Sprinkler System Fire Fighting And Fire Alarm System Ups Fountain And Pump Sets In Chhattarsal Stadium Model Town Delhi Sh Operation Maintenance Of Ei F

Tender Notice

25787234
Maintenance Of Electrical Installation Fans Including Compound Lights Dg Set And Substation Wetriser Sprinkler System Fire Fighting And Fire Alarm System Ups Fountain And Pump Sets In Chhattarsal Stadium Model Town Delhi Sh Operation Maintenance Of Ei F
Indian
Delhi
21-10-2020
29-10-2020
29-10-2020

Tender Details

MAINTENANCE OF ELECTRICAL INSTALLATION Fans Including Compound Lights Dg Set And Substation Wetriser Sprinkler System Fire Fighting And Fire Alarm System Ups Fountain And Pump Sets In Chhattarsal Stadium Model Town Delhi Sh Operation Maintenance Of Ei Fans Substation Dg Set Fire Fighting And Fire Alarm Ic Sprinkler System And Pump Sets Ic Comprehensive Maintenance Of Ro Dg Set And Servicing Of Transformer

Key Value

Document Fees
Refer document
EMD
INR 172250.00 /-
Tender Value
INR 86.12 Lakhs /-

BOQ Items

Name of Work: MOEI & Fans including Compound Lights, DG Set and Sub-Station, Wetriser Sprinkler system, Fire Fighting and fire alarm system, UPS, Fountain and Pump sets in Chhattarsal Stadium, Model Town, Delhi. (SH:- Operation & Maintenance of EI & Fans, Sub-station, DG set, Fire Fighting and Fire Alarm i/c Sprinkler System and Pump sets i/c Comprehensive maintenance of RO, DG Set and servicing of transformer).
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Providing Day to Day Running Maintenance and Operation of Sub-Station, DG Set, EI fittings and installations of stadium i/c compound/street lights i/c 42.5 mtr long high mast lights (Stadium lights) and semi high mast (i/c replacement of electrical accessories etc. on all days including Sundays & Holiday on monthly basis etc. as per the direction of Engineer-in-charge and whenever requried as per terms & condition attached.\n\n 1 12 Month
2 2 Providing services for operation & normal preventive maintenance on all days i/c Sunday & Holiday of RO Plant operator cum pump operator (water supply pump set i/c horticulure pump sets) i/c cleaning of pump sets panels /RO plant panels and water cooler, changing of gland dori with parts repair of pump sets with parts & pump control panel keeping the pump set in running position complete etc as reqd installed at Various location of Chattrasal Stadium. 2 12 Month
3 3 Pdg. Services of day to day operation i/c maintenance of complete fire alarm detection system, digital/mechanical evacuation system i/c fire fighting & sprinkler system etc. complete with associated control panel, motors, pumps, valves & fire fighting pumps on all days round the clock basis i/c supplying and replacement of all defective spare parts in fire panel i.e. switch, resistance, diode, mother board, card, glass covers etc. for maintaining and upkeep the complete system in healthy and functional condition i/c operation of water supply pumps/storm water pumps and submersible pump set etc. installed in the stadium campus by providing workmen and as per terms and conditions attached i/c cleaning of all equipments/machineries, pump house & all associated pipe lines, control switch gears, cleaning of fountain pond etc. in maintaining the system always good & healthy condition for work. \n 3 12 Month
4 4 Operation and Maintenance of fountain installed at Chhatarsal Stadium as and when reqd i/c Sundays & Holidays i/c preventive maintenance & cleaning of all control panels and other accessories i/c under water light fittings i/c cleaning of fountain ponds and all accessories with the help of necessary cleaning agents/materials as per terms & conditions attached). \n(a)Water fountain near statue complete with 2 nos 7.5 HP fountain pumps\nb) Water fountain 30 mtrs long with 5 nos 7.5 HP fountain pumps 4 12 Month
5 5 Pdg. Services of operation and upkeep of passenger lifts installed at Chattarsal Stadium, Delhi on all working days i/c Sundays & Holidays i/c watch & Ward and security of lift equipments and accessories i/c lodging the complaint of faults/defects with OEM of lift (for rectifcation of defects and healthiness & functionality of lifts) providing following workmen as per detail given below:- Lift Operator 2 Nos. (One for each lift) (8AM to 6PM) or when as reqd. as per requirement 5 12 Month
6 6 Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.\nGroup C 6 100 pt.
7 7 Supplying Installation Testing and Commissioning of following electrical accessories for day maintenance in the existing electrical installation /wiring -rewiring etc as reqd ( Labour already include in item No.1)\n1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 7 1000 Mtr.
8 7.01 4.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 8 500 Mtr.
9 7.02 6.0 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable 9 300 Mtr.
10 7.03 16/0.20 mm (0.5 sq.mm) twin core FRLS PVC sheathed, flat flexible copper cable 10 500 Mtr.
11 7.04 S.P. 5/6 A, one way modular switch, ISI marked 11 100 Each
12 7.05 S.P. 15/16 A, one way modular switch, ISI marked 12 100 Each
13 7.06 3 pin 5/6 A modular socket outlet, ISI marked 13 100 Each
14 7.07 6 pin 15/16 A modular socket outlet, ISI marked 14 100 Each
15 7.08 3 pole MCCB, 100A, 16kA 15 4 Each
16 7.09 3 pole MCCB, 150A, 16kA 16 2 Each
17 7.1 3 pole MCCB, 200A, 25kA 17 2 Each
18 7.11 63 A, 2 Pole isolator 18 20 Each
19 7.12 40 A, 4 Pole isolator 19 10 Each
20 7.13 63 A, 4 Pole isolator 20 10 Each
21 7.14 Capacitor 2.5 Microfarad 21 100 Each
22 7.15 Capacitor 3.15 Microfarad 22 40 Each
23 7.16 Ignitor for 70-400 W suitable for HPSV /MH Lamp 23 20 Each
24 7.17 250 watt SE lamp 24 10 Each
25 7.18 400 watt SE lamp 25 10 Each
26 7.19 250 watt MH/SV Ballast 26 10 Each
27 7.2 400 watt MH/SV Ballast 27 10 Each
28 7.21 1 x 36 watt electronic choke 28 100 Each
29 7.22 2 x 36 watt electronic choke 29 100 Each
30 7.23 1 x 28 watt electronic choke 30 100 Each
31 7.24 2 x 28 watt electronic choke 31 100 Each
32 8 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.\n63 mm dia (OD-63 mm & ID-51 mm nominal) 32 180 Mtr.
33 8.01 90 mm dia (OD-90 mm & ID-76 mm nominal) 33 80 Mtr.
34 9 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.\n63 mm dia (OD-63 mm & ID-51 mm nominal) 34 180 Mtr.
35 9.01 90 mm dia (OD-90 mm & ID-76 mm nominal) 35 80 Mtr.
36 10 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. \nUpto 35 sq. mm 36 160 Mtr.
37 10.01 Above 35 sq. mm and upto 95 sq. mm 37 100 Mtr.
38 10.02 Above 95 sq. mm and upto 185 sq. mm 38 160 Mtr.
39 11 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing masonry open duct as required. \nUpto 35 sq. mm 39 200 Mtr.
40 11.01 Above 35 sq. mm and upto 95 sq. mm 40 200 Mtr.
41 11.02 Above 95 sq. mm and upto 185 sq. mm 41 200 Mtr.
42 12 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required. \nUpto 35 sq. mm (clamped with 1mm thick saddle) 42 200 Mtr.
43 12.01 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 43 200 Mtrs.
44 12.02 Above 95 sq. mm and upto 185 sq. mm (clamped with 25/ 40x3mm MS flat clamp) 44 200 Mtr.
45 13 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.\n3 x 1.5 sq. mm 45 100 Mtr.
46 13.01 6 x 1.5 sq. mm 46 100 Mtr.
47 13.02 3 x 4 sq. mm 47 200 Mtr.
48 13.03 6 x 4 sq. mm 48 80 Mtr.
49 13.04 3 x 6 sq. mm 49 80 Mtr.
50 13.05 6 x 6 sq. mm 50 50 Mtr.
51 14 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.\n20 mm 51 100 Mtr.
52 14.01 25 mm 52 100 Mtr.
53 14.02 32 mm 53 50 Mtr.
54 15 Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB’s/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)\n4 Way TP 54 3 Each
55 16 Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. 55 5 Each
56 17 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 56 40 Mtr.
57 18 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 57 80 Mtr.
58 19 Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.\n2 X 16 sq. mm 58 4 Each
59 19.01 3½ X 25 sq. mm 59 4 Each
60 19.02 3½ X 35 sq. mm 60 4 Each
61 19.03 3½ X 50 sq. mm 61 3 Each
62 19.04 3½ X 70 sq. mm 62 3 Each
63 19.05 3½ X 95 sq. mm 63 3 Each
64 19.06 3½ X 120 sq. mm 64 3 Each
65 20 Supplying and Installation of heavy duty exhaust fan alongwith aluminium louvers of 300 mm sweep 900 rpm in the existing opening, including making the hole suitable the size of the above fan making good the damage, connection testing commissioning etc as reqd. 65 10 Each
66 21 Servicing and overhauling of HT 400/630/800 Amp VCB/OCB complete etc. as required i/c routine yearly check up and reports etc. as well as testing & calibration of micro processor controlled relay of HT panel routine test etc. as reqd. with the help of relay testing machine etc. as required (a) O/C relay-2 nos. (b) Earth fault relay-1 no. (c) Master relay-1 no. (d) Trip circuit supervision relay-1 no 66 2 Job
67 22 Servicing of draw out type 800 amp/1000 amp/1600 amp/2000 amp, ACB 3 Phase 415 volt 50 Hz from the MV Panel, complete cleaning lubricating of moving parts checking and testing of wiring system, replacment of minor space parts such as spring, nuts bolts and washer, setting right the mechanism and reassembling testing and commissioning etc as required. (The work involves replacement of worn-out part with material within quoted rate) 67 6 Job
68 23 Calibration of Over Current and earth fault numeric type relay cleaning checking of wiring system calibration with secondary injection test kit setting of tripping according to the load complete with testing and commissioning as require. 68 6 Job
69 24 Lifting of existing defective pump set from the sump and lowering the repaired pump of 3/5 HP Submersible / Borewell Submersible Pump, 3 Phase including rewinding of motor including dismantling , assembling, commissioning and testing the same on load after making electric connections at site i/c site visit by Engineer and to and fro cartage etc. complete as required. 69 2 Each
70 25 Providing & fixing following Gun metal gate valve in the existing line with accessories etc. as reqd.\n50 mm. 70 3 Each
71 25.01 80 mm. 71 3 Each
72 26 Providing & fixing of following size G.M Non-return valve in the existing line with accessories complete etc. as reqd. \n50 mm 72 3 Each
73 26.01 80 mm. 73 3 Each
74 27 Supplying and fixing 6 mm size steel wire rope nylon insulated i/c D locking arrangement at the end for holding submersible pump set complete etc as reqd. 74 50 Meter
75 28 Repairing of mono block pump set of 25HP/18.6 KW including rewinding kit of motor, replacement of mechanical seal TC/TC upper, mechanical seal TC/TC lower, ball bearing, 'O' Ring, stamping repairing, lowering and lifting of the pump-set from the sump with the help of including dismantling , assembling, commissioning and testing the same on load after making electric connections at site i/c to and for cartage etc. complete as required. 75 1 Job
76 29 Comprehensive maintenance of following LPH R.O. Plants i/c supplying and replacement of all defective parts, micron filter catridges, anti-scalent, membranes and pump-sets etc. complete as required .\n(A) 50 LPH Capacity\ni) Chhattrasal Stadium - 2 Nos.\n(B) 250 LPH Capacity\n(i) Chhattrasal Stadium - 2 Nos. 76 12 Month
77 30 S/I/T/C/ of Reverse Osmisis RO+UV+UF system designed to deliver min 50 liters of purified water per hour through a 6 stage purification process. Its membrane should have a pore size of 0.0001 micron size which prevents the passage the of micro organisms and total dissoved salts making the water lighter, taste natural and safe to drink with automated switching off device.\nTechnical Specification:-\nreservoir capacity - (Not provided)\nProduction capacity - (50)\nRO Member (Thin Film Composite)- (75 GPD*4 Nos)\nUF Membrane 0.1 - 0.01 Micron\nInput Power Rating (Single Phase 100 - 250 V AC, 50-60 Hz)\nSystem Operating Voltage ( 24 V DC)\nOperating Temprature (10 Degree C to 40)\nMin. /Max. Operating pH- 6.5-8.0\n% of rejection of TDS (90 % (Approx) \nRO Membrane Flushing - (Auto Flush @ Every Start, every stop and every one hour of working for 1 minute.)\nStage of filtration - (Particulate Filter Memberane Life Enhancer Filter Sediment Filter Pre-carbon Filter R.O. Membrane Filter Post Carbon Filter)\n(Make- Kent Elite Plus-199716/ or equivalent in approved make) 77 1 Each
78 32 Comprehensive Maintenance of 1 x 750 KVA DG Set complete with alternator AMF panel & battery charges including carrying out the periodic maintenance with 02 Nos. B-Check Kit, Oil, Coolant, 01 Sets of Air Filter including cartage charges except cost of the spares complete as required. (All the B-Check material shall be supplied by the agency). (Cummins Model: QSK23-G31, ESN-00319090) 78 12 Month
79 33 Supplying of following accessories for 1 x 750 KVA DG Set for 'B' Check etc. complete as required. (Labour charges of this item is included in item No. 32)\nSeparator Fuel Water (4095189) 79 4 Each
80 33.01 Element Lub Oil Filter (388931) 80 4 Each
81 33.02 Water Filter DCA4-23 (405896) 81 4 Each
82 33.03 Inhibitor Corrission (4926654) 82 4 Each
83 33.04 Element Outer (4957708) 83 2 Each
84 33.05 Element Inner (4957709) 84 2 Each
85 34 Comprehensive Maintenance of 1 x 750KVA DG Set complete with alternator AMF panel & battery charges including carrying out the periodic maintenance with 01 Nos. B-Check Kit, Oil, Coolant, 1 Sets of Air Filter including cartage charges except cost of the spares complete as required. (All the B-Check material shall be supplied by the agency). (Cummins Model: KTA-38G2, ESN-25347507) 85 12 Month
86 35 Supplying of following accessories for 1 x 750 KVA DG Set for 'B' Check etc. complete as required. (Labour charges of this item is included in item No. 34)\nElement Lub Oil Filter (3165) 86 8 Each
87 35.01 Seal Rectangular Ring 87 8 Each
88 35.02 Element Fuel Filter (4084133) 88 4 Each
89 35.03 GASKET, Fuel Filter Cover 89 4 Each
90 35.04 Element, Oil by Pass filter 90 4 Each
91 35.05 Seal O Ring 91 4 Each
92 35.06 Seal O Ring 92 4 Each
93 35.07 Element Air Cleaner (4020551) 93 2 Each
94 35.08 Element Air Cleaner (4020552) 94 2 Each
95 35.09 Inhibitor Corrission (3167218) 95 2 Each
96 35.1 Element CRN Resistor (3827423) 96 8 Each
97 36 Supplying & pouring of following quality engine oil in the existing DG Set as & when reqd.as premium blue 15W/40 97 630 P/ltr
98 37 Comprehensive, running maintenance & Servicing of following capacity Window / Split installed under Chhattarsal Stadium i/c replacement all defective i.e. blower motor, compressor, Gas Charging, PCB, remote, Plug Top, Starting Capacitor, Running Capacitor, Starting Relay, Thermostat, Propeller Fan, Over load Relay i/c condenser unit, evaporative unit charging of refrigerant gas in case of leakage i/c refrigerant gas pipe with insulation, lead wire, plug Top, etc complete as per terms and conditions attached:-\na) Window type AC/ Split type AC of 1.5TR/2.0 TR capacity.\n(95 Nos. AC for 12 Months = 1140 Jobs) 98 1140 Job
99 38 SITC of energy efficient 3 star rated wall mounted split type AC Unit 2 TR capacity inverter type nominal capacity suitable for operation on single phase, 220v, 50hz, AC supply i/c electronic remote control, comprising of both indoor and outdoor unit with rotary compressor duly filled with suitable ecofriendly refrigerant, MS Angle iron stand for outdoor, 6 meter length. 4core 2.5 Sq mm wire, 4 mtr. copper tube of suitable size, wall thickness 0.8mm duly insulated with 9mm nitrile insulation, 5 mtr. PVC drain pipe of size 25mm i/c Elbow, Tee, Socket, Cement Solvent etc. complete as reqd. 99 2 Each
100 39 Supplying and fixing copper refrigerant pipe alongwith the accessories duly insulated with 9mm nitrile insulation for AC etc as reqd. 100 10 Mtr.
101 40 Providing and fixing of 12 Volt, 75 AH sealed maintenance free batteries for 40 KVA online UPS installed in Chattarsal Stadium i/c connection testing & commisioing etc as reqd. (i/c providing of connecting lead for batteries if reqd.) i/c credit to old existing 101 70 Each
102 41 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required\na) 150 mm dia. \n 102 20 Mtrs
103 41.01 b) 80 mm dia. 103 20 Mtrs
104 42 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. 104 2 Each
105 43 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required.\nStainless Steel (Grade 304) 105 10 Each
106 44 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :\n150 mm dia. 106 2 Each
107 45 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :\n150 mm dia. 107 2 Each
108 46 Supplying and fixing single headed internal/external hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Stainless Steel cap and chain as required\nSingle headed Stainless steel 108 2 each
109 47 Providing & Fixing 20 mm nominal internal dia gun metal globe valve & nozzle for first aid horse real. 109 20 Each
110 48 S/I/T/C i/c Replacement of following wornout/defective accessories/spares i/c connections, testing etc. as reqd.\na) Sprinkler (UL listed) 110 3 Each
111 48.01 b) Pressure gauge150 mm dia 111 2 Each
112 49 Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. 112 4 Each
113 50 Refilling of following type (stored pressure) fire extinguisher of different capacity ISI marked ABC dry powder/Co2/Foam i/c hydraulic pressure testing painting etc as reqd.\nABC Type (5Kg) 113 30 Each
114 50.01 CO2 (4.5 Kg) 114 20 Each
115 50.02 Foam Type (50ltr) 115 5 Each
116 51 S/I/T/C of ABC Powder type (Stored Pressure) Fire Extinguisher 6 KG. Capacity ISI Mark IS: 15683 Operating temperature (+5)°C to (+55)°C for Class 3A type of fire filled with MAP Powder complete in all respect etc. as reqd.\n 116 15 Each
117 52 S/I/T/C of CO2 type fire extinguisher 4.5 Kg Capacity ISI Mark IS: 15683 operatng temperature (-30) °C to (55) °C for Class 13B type of fire fitted with 1 Mt. Hose & PVC Horn complete in all respect etc. as reqd. 117 10 Each
118 53 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work) i.e. Painting of various metallic surface i/c scraping old paint from HT Panel, LT Panel, Transformer, Feeder Pillar, DB's, Loose Wire Box etc as reqd. 118 100 Sqmt.
119 54 Supplying and Fixing of hose cabinet of size 900 mm x 600 mm x 500 mm made of 1.6 mm thick MS sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant 2 Nos. 15 mtr. Long Hose pipe, 1 No branch pipe, mounted on wall OR raised brick platform & duly painted with Post Office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required. 119 5 each
120 55 Supplying and Fixing water proof LED lights made out of Stainless Steel suitable to be fitted with LED'S(Warm white) capacity 3x1 watt 24 volts including testing & commissioning complete as reqd. 120 10 each
121 56 Supply and fixing of Waterproof LED Lights (RGB Colour ) 3x3watt Forged stainless Steel construction with Stainless Steel top surface(Wall/floor recessed) including testing & commissioning etc. as required. 121 15 each
122 57 S/I/T/C of gun metal Geyser Jet compatible with the existing Geyser jet of size 25 mm with universal with GI fittings etc. as required. 122 5 each
123 58 S/F of following size PVC insulated PVC sheathed copper conductor submersible flat cables in existing pipe/on surface/recess along with GI pipes etc complete as reqd.\n3 x 1.5 sq mm size 123 60 mtr
124 59 Servicing and Overhauling of 7.5 HP induction 3 Phase Motor Pump set i/c varnishing ,greasing , oiling and making Coupling alignment i/c replacement of bearing, coupling etc and re- nstallation the same, testing and commissioning etc complete as reqd. 124 1 Job
125 60 Servicing and Overhauling of upto 7.5 HP induction 3 Phase Motor of jockey Pump set i/c varnishing ,greasing , oiling and making Coupling alignment i/c replacement of bearing, coupling etc and re-installation the same, testing and commissioning etc complete as reqd. 125 1 Job
126 61 Repairing of Mono submersible motor upto 7.5 HP complete dismentaling and carrying out the following works i/c cartage pf pump to and from site to workshop including testing & commissioning etc as required.\nRewinding of motor - 01 No.\nMotor bush bearing - 1 No.\nRotor sleeve polishing grinding - 1 No.\nMotor seal - 04 Nos.\nMotor Studs - 01 No. 126 2 Job
127 62 Supplying, laying/ fixing, testing and commissioning of following thickness resin bonded fiber glass pipe section insulation having density 80 kg/cum or mineral wool (non combustible) having density of 144 Kg/ cu m duly covered with a layer of 120 gm/ sq.m polythene sheet (vapour barrier) on existing pipe and finally applying 0.63mm aluminium sheet cladding complete with type3, grade 1 roofing feltstrip(as per IS:1322 as amended up to date) at joints etc. as per specifications and as required.\n75 mm 127 60 Sqmt.
128 63 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. 128 40 Sqmt.
129 64 Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. 129 5 Sqmt.
130 65 Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core. 130 5 Sqmt.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail