Special Repair For Roof Treatment For Building No P 43 At North Camp Under Ge Af Bamrauli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Nov 2020
0 days left
EMD
92000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Special Repair For Roof Treatment For Building No P 43 At North Camp Under Ge Af Bamrauli
BOQ
| Name of Work: SPECIAL REPAIR FOR ROOF TREATMENT FOR BLDG NO P-43 AT NORTH CAMP UNDER GE (AF) BAMRAULI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. | 400 | Sqm | |
| 2 | 2 | M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:4 finishing the surface fair and even complete all as specified and directed. | 150 | Sqm | |
| 3 | 3 | M&L for 15 thick rendering on surface other than fair faces on brick wall or stone wall in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.\n | 150 | Sqm | |
| 4 | 4 | M&L for 5 mm thick rendering in CM 1:3 on new concrete surfaces including finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | 100 | Sqm | |
| 5 | 5 | M&L for preparation of new plastered surfaces of walls and two coats of cement base paint over a coat of alkali resistant primer on wall surfaces complete all as specified and directed. | 150 | Sqm | |
| 6 | 6 | M&L preparation of new plastered surfaces of walls and applying 2 mm thick white cement putty by finishing the surface even and smooth and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. | 150 | Sqm | |
| 7 | 7 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.\n | 100 | Sqm | |
| 8 | 8 | M&L for preparation of old plastered surfaces of walls and applying one coat of cement base complete all as specified and directed.\n | 50 | Sqm | |
| 9 | 9 | M&L for complete removal of existing treatment on walls, preparing to receive one coat of white cement putty by finishing the surface to even and smooth and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed. | 80 | Sqm | |
| 10 | 10 | M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed. | 120 | Sqm | |
| 11 | 11 | Dismantling of mild Steel Work of any description not otherwise provided complete all as specified and directed. | 62.8 | Quintal | |
| 12 | 12 | Excavating in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed. | 20 | Each | |
| 13 | 13 | M & L for PCC 1:3:6 type C2 (Using 40 mm graded stone aggregate) as in foundation, sub base / mass concrete etc complete all as specified and directed. | 5.5 | Cum | |
| 14 | 14 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws including dismantling of asbestos cement corrugated sheets complete all as specified and directed. | 832 | Sqm | |
| 15 | 15 | S&F steel work in tubular trusses/tubular pipes as in post including special shaped washer etc complete using ERW or induction butt welded tubes complete all as specified and directed | 3600 | Kgs | |
| 16 | 16 | S&F steel work in hollow structural pipes as in rafters/purlins and trusses special shaped washers including clamp and bolt complete using ERW or induction butt welded tubes conforming to relevant IS complete all as specified and directed. | 3220 | Kgs | |
| 17 | 17 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a priming coat of red oxide or zinc chrome complete all as specified and directed. | 80 | Sqm | |
| 18 | 18 | Demolition of cement concrete (reinforced) of any description & in any position not otherwise specifically provided for complete all as specified and directed. | 0.5 | Cum | |
| 19 | 19 | Demolition of existing mud/phuska in roofs any thickness including plastering and leaping including brick tiles or terracing tiles (brick tiles shall be dismantled along with mud phuska) whether full thickness removed or per there of any description on horizontal and vertical surface and removed spoil out side MD land including loading & unloading and stacking at the destination complete all as specified and directed. | 625 | Sqm | |
| 20 | 20 | M&L for 25 mm thick (average thickness) PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) mixed with water proofing compound as in roof padding on existing roof slab laid to slope including finished the surface fair and even complete all as specified and directed. Note :- Water proofing compound will be measured and paid separately as supply only under relevant item of this schedule. | 15.625 | Cum | |
| 21 | 21 | M&L for Cleaning the roof surface from dust /dirt and applying a coat of bituminous primer @ 0.30 liters per square meter uniformly and including applying hot blown bitumen of grade 85/25 conforming to IS 702 @ 1.20 Kg/Sqm and including APP based polymeric water proofing membrane 90 to 100 micron thick central core of HM HPDE film weight not less than 3.00 Kg/Sqm laid under standard strict supervision of manufacturer’s representative including sealing of side laps/end laps by thermo fusing and including supply and fixing brick tiles 40mm thick laid over and including 15mm thick screed bed in cement mortar 1:4 mixed with polymer based liquid water proofing additive as per manufacture’s instructions/specification and jointed and pointed in cement sand mortar 1:3 mixed with 5% crude oil by weight of cement and flush pointed in cement sand mortar 1:3 as a separate operation including crude oil complete all as specified and directed. \nNote:- Water proofing liquid will be measured and paid separately as supply only under relevant item of this schedule\n\n | 625 | Sqm | |
| 22 | 22 | Supply only integral waterproofing compound/liquid of make approved by GE complete all as specified and directed. | 16 | Ltr | |
| 23 | 23 | S&F 110mm dia bore PVC (SWR) pipe single socket in any lenth with rubber ring joints laid in floors and trenches including taking down existing 110 mm bore PVC (SWR) pipe complete all as specified and directed. | 50 | RM | |
| 24 | 24 | S&F PVC (SWR) bends of any radius for 110mm dia bore pipe complete all as specified and directed. | 10 | EACH | |
| 25 | 25 | Demolition of brick work/stone boulder masonry built in cement mortar complete all as specified and directed. by Engineer- in- Charge | 10 | Cum | |
| 26 | 26 | M & L brick masonry with sub class \"B\" bricks built in cement mortar 1:6 straight or curved on plan mean radius exe 6 mtr etc complete all as specified and directed. | 10 | Cum | |
| 27 | 27 | Disconnecting existing water tanks exc 250 but not exc 500 ltr capacity setting a side for carrying out roof treatment and reconnecting/refixed in the same position complete all as specified and directed. | 10 | Each | |
| 28 | 28 | M&L for Cutting chases, pinning in for brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring or inserting sheets, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed. | 100 | RM | |
| 29 | 29 | M&L for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in coping, benching, bed block, cills like including weathering and slightly rounded etc including necessary form work. complete all as specified and directed. | 2 | Cum | |
| 30 | 30 | Dismantling wooden ceiling boards in any thickness including aluminium frame work in grid pattern complete all as specified and directed. | 236 | Sqm | |
| 31 | 31 | M&L for precast RCC Jallies 35 mm thick with cement concrete 1:2:4 type B0 [Using 12.5 mm graded stone aggregate] reinforced with 5 mm dia GI wire both ways in each row @75 mm C/C including necessary moulds and set in CM 1:4 complete all as specified and directed.\n | 38.3 | Sqm | |
| 32 | 32 | S&F PVC sheet for ceiling & inner framework, the strips 5 to 8 mm thick decorative type should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall horizantally or vertically at an equal interval between two PVC strip. The PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels with POP plaster and cornices are joined through solvent content. Ceiling Side prelam sheet complete all as specified and directed. | 249 | Sqm | |
| 33 | 33 | M&L for Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multi-stranded copper conductor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metallic suitable PVC conduit including all fittings and one run of PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6.0 Sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.\n(b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surfaces. .(c) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire\n | 200 | Per Running Metre | |
| 34 | 34 | Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (a) The unit rate quoted for this item is deemed inclusive of unscrewing of the serviceable fittings and fixtures as directed and deposit in MES store yard. (b) The unit rate quoted for this item cost of cutting chases for taking out concealed conduit and nitch for terminal box. (c) Decision of GE shall be final and binding in respect of serviceability of fittings/fixtures. (d) Exhaust fan and ceiling fan will be taken down separately under relevant item of this schedule. | 444 | Per point | |
| 35 | 35 | M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and incl rigid PVC conduit (concealed) 19 mm internal dia/bore with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly including metal junction box , grid plate, base plate suitable for modular switches, sockets, regulators. Note- (a) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surfaces.(b) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire(c) Switches & sockets will be measured and paid for separately. (a) One light/fan/bell point controlled by one switch single pole one way | 280 | Per point | |
| 36 | 36 | All as per Sl Item No. 35 here-in-before but one 3 pin 5 amp switch socket out let independent board. | 64 | Per Point | |
| 37 | 37 | All as per Sl Item No.35 here- in-before but one 3 pin 5 amps socket outlet on the same board. | 20 | Per Point | |
| 38 | 38 | All as per Sl Item No.35 here- in-before but One 3 pin 5 Amps socket out let on independent board but below the switch board of light point in the same vertical plane | 30 | Point | |
| 39 | 39 | All as per Sl Item No.35 one light point controlled by two 2-way switches 240 volts | 10 | Per point | |
| 40 | 40 | All as per Sl Item No. 35 here-in-before but using 02 runs 4.0 Sq mm FR with stranded copper conductor cable as phase and neural and 01 run of 4.0 Sq mm FR with stranded copper conductor cable as earth conductor for one 16 amp switch socket outlet on independent board. | 40 | Per Point | |
| 41 | 41 | S&F switch modular flush type 6A single pole one way, One module ISI marked complete all as specified and directed. | 394 | Each | |
| 42 | 42 | S&F fix switch modular flush type 15/16 Amp single pole one way 240 volt one module ISI marked complete all as specified and directed. | 40 | Each | |
| 43 | 43 | S&F modular switch socket 6 Amp 2 in 1 2/3 pin combined, two module, ISI marked complete all as specified and directed. | 114 | Each | |
| 44 | 44 | S&F modular switch socket 16 Amp 2 in 1 3/5 pin combined, two module ISI marked complete all as specified and directed. | 40 | Each | |
| 45 | 45 | S&F ceiling rose surface bakelite 60x25mm three terminals complete all as specified and directed. | 80 | Each | |
| 46 | 46 | S&F electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) modular type complete all as specified and directed. | 30 | Each | |
| 47 | 47 | S&F modular switch 2 way 6A 240 volt complete all as specified and directed. | 20 | Each | |
| 48 | 48 | S&F LED light fitting of 21 watt 4 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type complete all as specified and as directed. Make :- Philips Cat Part No. BN021C LED20S PSU CDL GR (or) Havells, Cat Part No HEWEBP7IN1W020 (or) Crompton Cat Part No LCCLB20-CDL as approved by GE including the taking down old unserviceable light fitting and depositing the same in MES store yard checking of serviceability by the Engineer-in-Charge. | 80 | Each | |
| 49 | 49 | S&F 2 x 2 feet size 36 watt 240 volt 50 Htz sensor based LED luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as specified and as directed. Make:- Havells Cat Part No. Venusneo HE2x2R36WLED857PIRSENSOR (or) equivalent model in Philips /Crompton/Wipro/Bajaj as approved by GE. | 40 | Each | |
| 50 | 50 | S&F 1x2 feet size LED fitting 36 watt 240 volt 50 Htz 120 lumen/watt luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as specified and as directed. Make:- Bajaj Cat Part No. BZRSLL 36 W GZ1 WH or equivalent model in Philips/Havells/Crompton/Wipro as approved by GE. | 30 | Each | |
| 51 | 51 | S&F high intensity swivel light 20 watt 240 volt made out of pressure diecast aluminium housing IP20 cutout size 170mm complete all as specified and as directed. Make:-Syska Cat Part No.SSK-SWR-SMD-20W or equivalent model in Philips/Havells/Crompton/Wipro as approved by GE. | 15 | Each | |
| 52 | 52 | S&F LED batten extruded surface mounting fitting 2 feet long aluminium housing 10 watt input voltage 220 volt inbuilt LED and driver complete all as specified and as directed. Make:- Philips Cat Part No.BN021LED 10S or equivalent model in Havells/Crompton/Wipro/Bajaj as approved by GE. | 40 | Each | |
| 53 | 53 | S&F LED strip light with driver 240 volt 50 Htz lighting effects blue/warm white in 5 mtr length complete all as specified and as directed. Make:- Philips/Havells/Crompton/Wipro/Bajaj as approved by GE. | 150 | RM | |
| 54 | 54 | S&F LED cabinet light of swivel and angle orientation to adjust the spot 240 volt 50 Htz 3 watt shape round cut out 43mm lumen 240/watt.made out of pressure die-cast aluminium housing complete all as specified and as directed. Make:- Syska Cat Part No. SSK-SW-R-3W-C or equivalent model in Philips/Havells/Crompton/Wipro/Bajaj as approved by GE. | 20 | Each | |
| 55 | 55 | S&F COB down lights 3 watt cut out 80 to 85 mm CRI more than 75 lumen 110/watt IP20 made out of thermoplastic complete all as specified and as directed. Make:- Syska Cat Part No. SSK-LBD-0301 or equivalent model in Philips/Havells/Crompton/Wipro/Bajaj as approved by GE. | 20 | Each | |
| 56 | 56 | S&F energy saving decorative rectangular shaped wall recessed luminaries with SMD as light source IP-66 7 watt 240 volt complete all as specified and as directed. Make:- Havells Cat Part No Radiant Neo FT07WLED830SASYMBOPC or equivalent model in Philips/Havells /Crompton/Wipro/Bajaj as approved by GE. | 30 | Each | |
| 57 | 57 | S&F recess mounted LED wall washers tilted 70 outward and swivels 360 degree to offer best illumination 240 volt 50 Htz 20 watt including driver 3000/6500k 100lumen/watt complete all as specified and as directed. Make: Philips/Havells/Crompton/Wipro/Bajaj as approved by GE. | 30 | Each | |
| 58 | 58 | S&F 1x1 feet low profile down light 15 watt 240 volt 50 Htz 3000/6500K ceiling cutout 180x180mm complete all as specified and as directed. Make: Havells model No-15WLED857S or equivalent model in Philips/Crompton/Wipro/Bajaj as approved by GE. | 30 | Each | |
| 59 | 59 | S&F ceiling mounted two heads lights spot light 240 volts 50 Htz aluminium body high quality chrome finish 2x50 watt 2x230 lumen complete all as specified and as directed. Make:- Philips Cat Part No.53092/31/PO or equivalent model in Havells/Crompton/Wipro/Bajaj as approved by GE. | 10 | Each | |
| 60 | 60 | S&F fancy type wall mounted fitting made out of bronze lamp base E27 240 volt 50 Htz covered with frosted glass for elegance finish complete all as specified and as directed. Make :- Philips Cat Part No. 31434 or equivalent model in Havells/Crompton/Wipro/Bajaj as approved by GE. | 10 | Each | |
| 61 | 61 | S&F Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts complete all as specified and as directed. \nNote : MCBs shall be measured and paid for separately under respective item of this schedule. | 10 | EACH | |
| 62 | 62 | S&F Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, vertical type suitable for mounting MCCBs/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and as directed. \nNote :- MCBs and MCCB will be measured and paid for separately under respective item of this schedule. | 5 | EACH | |
| 63 | 63 | S&F MCCB, three pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity fixed in DBs catered here-in-before complete all as specified and as directed. | 5 | EACH | |
| 64 | 64 | S&F MCB, SP, 6 to 32 Amp rating, 10 KA breaking capacity, 230 volt, 50 Hz, 'C' series fixed in DBs complete all as specified and as directed. | 100 | EACH | |
| 65 | 65 | S&F MCB, SP, 35 to 63 Amp rating, 10 KA breaking capacity, 230 volts, 50 Hz, C series fixed in DBs complete all as specified and as directed. | 100 | EACH | |
| 66 | 66 | S&F MCB SPN 63 Amp rating 10 KA breaking capacity 230 volt 50 Hz 'C' series fixed in DBs complete all as specified and as directed. | 5 | Each | |
| 67 | 67 | Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. \nNotes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I\n(ii) PCC pit shall be provided at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc is deemed to be included in the unit rate quoted. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any variation in quantity will be adjusted. | 5 | EACH SET | |
| 68 | 68 | S&F test point terminal block made of gun metal or phosphorous bronze size 75x75x25 mm drilled and screw including 3 Nos 8mm dia 25mm long hex head screw complete all as specified and as directed. | 5 | Each | |
| 69 | 69 | Supply, laying, jointing & testing of 4 core 10 Sqmm cross sectional area underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multi-stranded, armoured heavy duty 1100 Volt grade laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs including taking out old unserviceable cable complete all as specified and as directed. Note :- (i) Excavation, earth work, sand cushioning, cable protection cover and pipe will be measured and paid separately under respective items of this schedule. (ii) Old cable shall be contractor's property and necessary amount as per schedule of credit shall be deducted from contractor's due payments. | 100 | RM | |
| 70 | 70 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. (cable shall be laid 60 cm below ground level ) | 10 | Cum | |
| 71 | 71 | Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. | 8 | Cum | |
| 72 | 72 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point. | 2 | Cum | |
| 73 | 73 | Supply and lay river bed sand for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . | 1 | Cum | |
| 74 | 74 | supply and lay old size brick well burnt, laid flat ,for cable protection complete all as specified and directed. | 345 | Each | |
| 75 | 75 | Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and directed . Make – Ravindra,Oswal,Kinjal. | 11 | RM | |
| 76 | 76 | S&F LED flood light luminaries with secondary optics made in pressure die cast housing and heat sink in aluminium IP-65 protection 240 volt 50 Htz. complete all as specified and as directed. Make: Bajaj Cat Part No.BJFL 80 W Make: Philips/Havells/Crompton/Wipro as approved by GE. | 6 | Each | |
| 77 | 77 | S&F LED flood light luminaries IP-65 protection 240 volt 50 Htz 50 watt lighting effects green complete all as specified and as directed. \nMake: Philips/Havells/Crompton/Wipro as approved by GE. | 12 | Each | |
| 78 | 78 | S&F and testing LED street light 25 watt 6000k new generation energy saving and environmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with including 40mm dia medium grade GI pipe of not less than 1.20 m length as bracket in including taking down old light fitting complete all as specified and as directed. \nMake: Philips/Havells/Crompton/Wipro as approved by GE. | 5 | Each | |
| 79 | 79 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material. |
AI Tender Summary
Tender Timeline
Oct 20, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 10, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender