Name of Work: REPAIR AND MAINT OF CANTT INTERNAL ROADS AT KARGIL, BUDHKHARBU & DRASS UNDER GE KARGIL
Sl.No.
Item Description
Item Code / Make
Nos of unit required
Units
1
1
Schedule of works
2
2
Repair to pot holes any depth not exceeding 1 Sqm each including sweep free from dust and mud, or water, scoring sunken surfaces in road path, etc cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming including supply of road metal & making good by applying tack coat of 10 kg/10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 Sqm blended with 0.09 cum of stone chipping 6.30mm size again well rameed incl supply of premix macadam binder and chipping depth of pot holes exc 40mm, complete all as specified and directed.
60
Per \n10 Sqm
3
3
Preparing surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bag to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous VG 10 grade primer @ 5 Kg per 10 Sqm, complete all as specified and directed.
621
Per \n10 Sqm
4
4
M&L for 40mm thick consolidated thickness premixed asphaltic dense concrete (design mix) with 6% binder content by weight of total mix using paving bitumen of VG-10 grade and spreading uniformally by means of mechanical paver finisher over existing black top surface & rolled and compacted with 8 to 12 ton power roller to requered gradient and camber, complete all as specified and directed.
400
Per \n10 Sqm
5
5
All as per Srl item No 04 here in before but 30mm thick consolidated thickness premixed asphaltic dense concrete -ditto-
221
Per \n10 Sqm
6
6
Preparation of new/old road surfaces and applying thermoplastic reflective paint in marking of single coat as in centre line land edge line road marking of 150/100mm width using 'HOT MARK' by indigenous modern propelled road marking .
1200
RM
7
7
All as per Srl item No 06 here in before but edge line road marking of 100mm width -ditto-
1200
RM
8
8
Supply and fixing solar stud (cat eye) almn alloy and polyarbonate made of non breakable, polycarbonate with electrically prismatic retro reflective lens on both sides for maximim retro reflection in wet and dry conditions. Body shall be dust proof i.e. no dust accumulation on lance and space shall be build for finger the cat eyes, including adhesive or synthetic epoxy resine as per manufacturers's instruction including site clearance all as directed by Engr-in-Charge.
150
Each
9
9
S&F road safety PVC Convex Mirror 800 to 900 mm dia for raod safety complete complete all as specified.
21
Each
10
10
Note : - Contract sum will be derived after deduction of Rs. NIL as listed in Schedule `A` Part -II (Schedule of credit).
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
