Military Engineer Services-MES has published Special Repair To Lt Distribution System Of Perimeter Wall , Bleaching Dozing System And Provn Of Ceiling Fans , Security Lights With Pole And High Duty Reverse Osmosis Plant At Khunmoh Under Ge 861 Ews. Submission Date for this Tender is 09-11-2020. Ceiling Fan Tenders in Khunmoh Grn Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work: SPECIAL REPAIR TO LT DISTRIBUTION SYSTEM OF PERIMETER WALL, BLEACHING DOZING SYSTEM AND PROVN OF CEILING FANS, SECURITY LIGHTS WITH POLE & HIGH DUTY REVERSE OSMOSIS PLANT AT KHUNMOH UNDER GE 861 EWS. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply laying connecting and testing in repair 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 25 Sqmm normal cross section 3.5 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified and directed. | 1600 | RM | |
| 2 | 2 | Supply laying connecting and testing in repair 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 16 Sqmm normal cross section 4 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified and directed. | 1000 | RM | |
| 3 | 3 | Supply laying connecting and testing, 1100 volt graded heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel strip or wire and overall PVC sheathed of size 10 Sqmm normal cross section 2 core including suitable size lugs laid in trenches fixed to pole or passing through pipes incl all necessary clamps nuts, bolts and washers and remove unsv cable complete all as specified and directed. | 300 | RM | |
| 4 | 4 | Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc of poles/stays/cables etc and getting out in any type of soil, complete all as specified and directed. | 251 | Cum | |
| 5 | 5 | All as per srl item no.4 here in above, but exc 1.5m but not exc 3.0m in depth, complete all as specified and directed. | 0.32 | Cum | |
| 6 | 6 | Returning filling in (soil) including spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed. | 120.32 | Cum | |
| 7 | 7 | Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed. | 146 | Cum | |
| 8 | 8 | Sand cushioning to underground cable as per clause No 19.75 of SSR Part-I laid with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable. The top layer of 15cm shall be punned to 10 cm (total 23 cm) complete all as specified and directed. | 89.1 | Cum | |
| 9 | 9 | Sub class ‘B’ brick old size protection cover laid dry flat transversally along the length of cable on cushioning with width equal to the length of brick complete all as specified and directed . | 9.57 | Per 1000 Nos | |
| 10 | 10 | Supply and fix in repair junction box of size 200x150x100mm made out of 3.15 mm thick CRCA sheet powder coated front door openable with magnetic locking arrangement including aluminium bus bar 4 Nos of size 100 Amps mounted on epoxy based post insulators and drilled holes for connections consisting with MCB SP 06 Amps-01 Nos all as required and fixed to poles by using MS clamp of size 25x6mm and including suitable nuts, bolts and washers including painting with 2 coats of super enamelled paint over a coat of red oxide primer internally and externally complets all as specified and directed. | 5 | Each Job | |
| 11 | 11 | Supply and fixing in repair PVC FRLS cable, insulated unsheathed with flexible multistranded copper conductor of size 2.50 Sqmm three core 1100 Volts grade for service connection from street light terminal box to security light terminals, complete all as specified and directed. | 600 | RM | |
| 12 | 12 | Taking down old unserviceable security/street lights any type and any wattage, complete all as specified and directed. | 50 | Each | |
| 13 | 13 | Supply and fixing of LED streetlight 60W aesthetically designed with excellent thermal management made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection with U-bracket having vertical adjustable arrangment complete all connected accessories, complete all as specified and directed. Make : Crompton Cat Part No LSTP-60-CDL or Equivalent in Havells/Bajaj/Philips/Halonix. | 55 | Each | |
| 14 | 14 | Supply and fixing of LED streetlight 40W aesthetically designed with excellent thermal management made up of pressure die cast housing with toughned glass and individual LEDs with secondary optics and IP66 protection with U-bracket having vertical adjustable arrangment complete all connected accessories, complete all as specified and directed. Make : Crompton Cat Part No LSTP-40-CDL or Equivalent in Havells/Bajaj/Philips/Halonix. | 20 | Each | |
| 15 | 15 | Supplying installing, commissioning testing in repair LT cubical feeder pillar box out door kiosk type made out of CRCA sheet 3.15mm ,3 phase 4 wire 50 C/S AC with aluminium bus bar of 250 Amps rating fixed on insulators for incoming & outgoing taping complete double door type with locking arrangement fixing on PCC platform with suitable nuts, bolts duly painted with two coats of synthetic enameled paint over a coat of red oxide primer, comprising with MCCB 160 Amps TPN 50Hzs, 25KA ( 01 Nos) in incoming and MCCB 100 Amps TP, 25KA (01 Nos), MCB 20 Amps SPN C curve (02Nos) cable for service connection complete all as specified and as directed. | 2 | Each Job | |
| 16 | 16 | Supplying installing, commissioning testing in repair LT cubical feeder pillar box out door kiosk type made out of CRCA sheet 3.15mm ,3 phase 4 wire 50 C/S AC with aluminium bus bar of 250 Amps rating fixed on insulators for incoming & outgoing taping complete double door type with locking arrangement fixing on PCC platform with suitable nuts, bolts duly painted with two coats of synthetic enameled paint over a coat of red oxide primer, comprising with MCCB 100 Amps TPN 50Hzs, 25KA ( 01 Nos) in incoming and MCCB 63 Amps TP, 25KA (01 Nos), MCB 20 Amps SPN C curve (02Nos) cable for service connection complete all as specified and as directed. | 4 | Each Job | |
| 17 | 17 | Material & labour for earthing complete with galvanised cast iron earth plate electrode of size 600x600x6 mm thick buried directly in ground less than 3.0m deep below normal ground level as earth electrode with top edge of the earth plate not less than 2.25mtr below ground level using GI strip 32x6mm as earth continuity conductor connected to earth plate by means of welding, GI thimbles, nuts, bolts & washers all as directed including providing earth wire protection pipe GI light grade 40mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover with handle of angle iron frame of size 40 x 40 x 6mm in PCC 1:3:6 adequate quantity of charcoal dust and salt and kalmi shore all around the earth plate, earth work in any type of soil remaining surplus excavated material all as required at site and specified in EP No 3 of SSR part I 2009 or directed by Engineer-in-charge and incl testing on completion. \nNOTE :- (i) Item of earthing includes cost of 7.5 m long GI strip of size 32x6mm with protection pipe of 40mm dia GI medium grade, any variation in length shall be adjusted through deviation order based on SSR rates enhanced by 25%.\n(ii) On testing after completion of earthing if the desired earth resistance is not obtained earthing will be re-done by the contractor at his own risk and cost.\n | 6 | Each Job | |
| 18 | 18 | Supply and fixing steel tubular swaged pole with cast iron base plate finial tapper plug, bolts nuts and screws and specified type 410-SP-31(9 mtr long) in truly vertical position 1.5 m length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30 cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts complete all as specified laying GI pipe light grade for cable protection and fixing to existing pole with flat iron clamp 25x3mm including nuts bolts and washers etc complete for 40mm dia, complete all as specified and directed.. | 3 | Each | |
| 19 | 19 | PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. | 1.82 | Cum | |
| 20 | 20 | M&L PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. | 1.52 | Cum | |
| 21 | 21 | M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in Stay filling or pole coping etc including necessary form work for rough finished surfaces complete all as specified and directed. | 0.14 | Cum | |
| 22 | 22 | Supply and fixing ceiling fan 1200 mm sweep with electronic type fan regulator, copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less then 300 mm, single phase , 240 volts ISI marked , including connection with three core copper wire etc, complete all as specified and directed. Make: Havells Model - Mozel 1200 mm, or Usha, Model-Striker 1200mm, or Bajaj, Model-Excel star 1200mm. | 86 | Each | |
| 23 | 23 | Point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl necessary fittings & fixture and to be turminated in sunk cast iron/pressed steel/PVC terminal boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed. | 86 | Per Point | |
| 24 | 24 | Switch piano flush button types 5/6 Amp, single pole, one way complete all as specified and directed. | 86 | Each | |
| 25 | 25 | Supply and install, connecting ,testing and Commissioning of high pressure single head adjustable DOSING SYSTEM (Chemical used : ALTOCH-CH) of the following specifications. Adjustable high pressure 5 kg/sqcm .power input 230 v ,50 hz , 40 spm 1/30 fractional hoursepower, max output 10ltr/hrs with mandatory accessories like lead tubing , connecting ferrules , check valves, etc \n 1. Preparation tank of net capacity 100 Ltrs.FRP dosing tank dia 650xnet Height 375+conical 300. gross height with stand 1000 mm consisting of: (a) Water inlet line \n(b) Outlet with stainer \n(c) Drain \n(d) overflow \n(e) conical bottom for sludge deposition \n(f) Pot hole with cover \n(g) Level gauge \n(h) Agitator 120 Watt 900 RPM 1Phase flange mounted motor with plastic shaft and impeller. 2. Service Tank dia 480xheight 575 net capacity 100 ltrs consisting of \n(a) Water inlet \n(b) Dosing pump inlet arrangement \n(c) Drain \n(d) overflow \n(e) Level gauge \n(f) inspection port \n(g) 1 HP motor Agitator 120 Watt 900 RPM 1Phase flange mounted motor with plastic shaft and impeller. \n(h) Provision of mounting pump on lid/wall. MAKE: M/s Sathya Sai Aqua Pura Services or M/s Sombasnsi Enviro Engg Pvt Ltd. | 1 | Each | |
| 26 | 26 | Supply & installation commissioning and testing of heavy duty, automatic, RO water purifier 250 Ltrs /Hr purification capacity, consists of RO+UF+ 20 Inch sediment bowl + 40 Inch vessel with media for iron & disolved impurities removal, one pressure pump for flow of RO membranes. Inclding raw water pump 0.5 HP 220 v single phase Micron filter housing with 45 micron filter. including electric pannel board with flow meter, pressure guage complete.all as specified and directed by Engr-in-Charge. The feed shell be having following charactersits :- (i) Turbidity less then 5 ppm. (ii)Iron less then 0.3 ppm. (iii) PH range from 6.5-7.2 (iv) Total hardness less then 5000 ppm. (v) TDS less then 1500 ppm, complete all as specified and directed. Make: M/s Optimus Enviropro Pvt Ltd or M/s Sathya Sai Aqua Pura Services or M/s Sombasnsi Enviro Engg Pvt Ltd. or M/s Sophisticated Industrial Materials Analytic Labs Pvt Ltd. | 1 | Each | |
| 27 | 27 | Steel water tubing, 25 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, laid for cable protection at road crossing/under concrete including jointing material, complete all as specified and directed. | 108 | RM | |
| 28 | 28 | Steel water tubing, 20 mm bore, galvanised, "medium grade" with all fittings and fixtures and short lengths, laid for cable protection at road crossing/under concrete including jointing material, complete all as specified and directed. | 36 | RM | |
| 29 | 29 | Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 20mm dia with iron wheel head, both ends screwed for iron pipe, complete all as specified and directed for following bore of pipes. | 1 | Each | |
| 30 | 30 | Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve 25mm dia with iron wheel head, both ends screwed for iron pipe, complete all as specified and directed for following bore of pipes. | 1 | Each | |
| 31 | 31 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and directed. | 1 | Each | |
| 32 | 32 | Mild steel work as in framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets\nover 10 kg each to be measured under 'Structural Steel'), complete all as specified and directed. | 50 | Kg | |
| 33 | 33 | Point wiring with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 2.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl necessary fittings & fixture and to be turminated in sunk cast iron/pressed steel/PVC terminal boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light point/fan point controlled by one switch and making good disturbed surfaces with CM (1:3) to match with the existing surface, complete all as specified and directed. | 1 | Per Point | |
| 34 | 34 | Switch socket combination 2 in 1, 5/6 pin, 5 and 15 Amp, flush type universal complete all as specified and directed. | 8 | Each | |
| 35 | 35 | Supply and fixing PVC FRLS cable, insulated unsheathed with flexible multistranded copper conductor of size 4.0 Sqmm 1100 Volts grade as per site requirement of existing colour coding adopted, complete all as specified and directed. | 180 | RM | |
| 36 | 36 | Supply and fixing MCB DP, 6 to 32 Amps, 240 Volts 10 KA, 'C' series, fixed in repair and biconnect upper & lower terminals, integrated label holder to ensure circuit identification, complete all as specified and directed. Make : Havells Cat Part No DHMGCDPF006-032 or equivalent in C&S/Legrand/Siemens/Scheinder. | 1 | Each | |
| 37 | 37 | Sheet metal enclosures distribution board, single pole and neutral 2 way with 200 Amps rated bus bar 240 V, double door IP-42 protection, fixed on wall duly groted in solid block wall or n wooden board with electrical connection and making good distributed wall surfaces to match with existing specification including taking down existing, complete all as specified and directed. | 1 | Each | |
| 38 | 38 | Surface dressing not exceeding 30 cm deep and averaging 15 cm getting out in hard/dense soil, complete all as specified and directed. | 30 | Sqm | |
| 39 | 39 | Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc or for shaft wells, cesspits manholes pier holes etc n. exc 10 sqm on plan and n. exc 1.5m in depth and getting out in hard/dense soil, complete all as specified and directed. | 15 | Cum | |
| 40 | 40 | M&L Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and as directed. | 15 | Cum | |
| 41 | 41 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. | 52 | Sqm | |
| 42 | 42 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface even and smooth without using extra cement, complete all as specified and directed. | 56 | Sqm | |
| 43 | 43 | Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed. | 56 | Sqm | |
| 44 | 44 | Preparation of new plasetered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali-resistant priming paint, complete all as specified and directed. | 52 | Sqm | |
| 45 | 45 | RCC M-25 design mix using 20 mm graded aggregate as in Beams cantilevers, bressummers lintels over 1.5 m span complete all as specified and directed. | 1 | Cum | |
| 46 | 46 | Form work to sides and soffits of floor or roof beam haunching , lintels, cantilevers shelved including supports overhangs etc also splays between floors and beams, etc complete all as specified and directed. | 6 | Sqm | |
| 47 | 47 | MS TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. | 65 | KG | |
| 48 | 48 | MS TMT Bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securining with clip complete all as specified and directed. | 35 | KG | |
| 49 | 49 | Sand filling under floors or in foundation including watering and consolidation, complete all as specified and directed. | 1.5 | Cum | |
| 50 | 50 | Hard core of broken stone or boulders of guage n. exc 63mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. | 1.5 | Cum | |
| 51 | 51 | M&L 75mm thick, PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of floor, complete all as specified. | 20 | Sqm | |
| 52 | 52 | M&L 40mm thick ,plain cement concrete, 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors finished even and smooth without using extra cement, complete all as specified and directed. | 20 | Sqm | |
| 53 | 53 | Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. | 28 | SQM | |
| 54 | 54 | 0.63mm thick , plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc, fixed with 'L' or 'J' type or cranked hook bolts in roofs, walls etc. complete all as specified and directed. | 3 | Sqm | |
| 55 | 55 | M&L Plain cement concrete M-10, 1:3:6, type C-2, using 40mm graded mechanically crushed stone aggregate, 50mm thick, as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified and directed.\nNote:- The unit rate include for use of form work (straight or curved). | 12 | Sqm | |
| 56 | 56 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, conforming to Fe-290 (Gde-E-165), complete all as specified and directed. | 150 | KG | |
| 57 | 57 | M&L preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed | 8 | Sqm | |
| 58 | 58 | Steel ventilator with top hung shutter incl hinges, steel peg stay, including one shop coat of red oxide primer, complete all as specified and directed, complete all as specified and directed. | 0.25 | Sqm | |
| 59 | 59 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. | 1 | Sqm | |
| 60 | 60 | 4mm thick figured glass pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed. | 1 | Sqm | |
| 61 | 61 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. | 4.9 | RM | |
| 62 | 62 | Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and directed. | 1.8 | SQM | |
| 63 | 63 | 300mm size aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed | 1 | Each | |
| 64 | 64 | 100 mm long, mild steel cold rolled Butt hinges, medium weight, complete all as specified and directed. | 3 | Each | |
| 65 | 65 | 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. | 1 | Each | |
| 66 | 66 | 150mm long, extruded aluminium alloy handles, fabricated type, anodised, all as specified and directed. | 2 | Each |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
