| 1 | 1 | BOQ UPLOADED ON 19 OCT 2020 | | | |
|---|
| 2 | 2 | SCH \"A\" PART-I (CIVIL WORKS) | | | |
|---|
| 3 | 3 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. | | 1276 | SQUARE METRE |
|---|
| 4 | 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and as directed. | | 281.95 | QUINTAL |
|---|
| 5 | 5 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be\nprepared for hanging or sliding with and including either hooks\nand hinges or steel hanging door fittings (exclusive of steel\nsheeting or other covering, running rails and guides) and\nhanging also fastening and fixing complete all as psecified and as directed. | | 16078 | KILO\nGRAM |
|---|
| 6 | 6 | All as per item No 5.00 above but fixing only framed work in doors complete all as specified and as directed.\n Note: The serviceable steel sections /doors obtained from item No 4.00 shall be re used. | | 1540 | KILO\nGRAM |
|---|
| 7 | 7 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded without any attachment of grade Fe-410-W (grade E-250) quality A complete all as specified and as directed. | | 1507 | KILO\nGRAM |
|---|
| 8 | 8 | All as per item No 7.00 above but fixing only framed work in doors complete all as specified and as directed.\n Note: The serviceable steel sections /doors obtained from item No 4.00 shall be re used. | | 350 | KILO\nGRAM |
|---|
| 9 | 9 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long and not exc 10cm and dia of bolt 11 to 15mm complete all as specified and as directed. | | 80 | KILO\nGRAM |
|---|
| 10 | 10 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed. | | 1077 | SQUARE METRE |
|---|
| 11 | 11 | All as per item No 10.00 above but fixing only galvalume steel sheets with self tapping screws complete all as specified and as directed.\n Note: The serviceable steel sheets obtained from item No 3.00 shall be re used. | | 199 | SQUARE METRE |
|---|
| 12 | 12 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. | | 8640 | KILO\nGRAM |
|---|
| 13 | 13 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and removal of unserviceable debris to a distance not exceeding 100m complete all as specified and as directed. | | 136 | CUBIC \nMETRE |
|---|
| 14 | 14 | M & L for 100mm thick concrete flooring with RMC M-20 grade using (design Mix) vaccum dewatering method, laid in alternate bays including steel form work of MS channel sections of depth equal to thickness of concrete floor and trowelled with power trowel float finish to obtain level and joints filled with sealing compound complete all as specified and as directed. \nNote:Supply and filling Joint filling sealing compound shall be measured and paid seperately under respective item. | | 1090 | SQUARE METRE |
|---|
| 15 | 15 | M & L for forming 12 mm thick expansion joints filled with\npre-formed bituminous filler 100mm depth and top 30mm shall be primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.\n\n | | 20 | TEN\nRUNNING\nMETRE |
|---|
| 16 | 16 | M & L for Preparing new surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | | 795 | SQUARE METRE |
|---|
| 17 | 17 | Preparing old painted surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. | | 574 | SQUARE METRE |
|---|
| 18 | 18 | M & L for Preparing new surfaces of steel and iron surfaces of any description, not otherwise described, not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | | 68 | TEN\nRUNNING\nMETRE |
|---|
| 19 | 19 | M & L for Preparing old surfaces of steel and iron surfaces of any description, not otherwise described, not exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. | | 102 | TEN\nRUNNING\nMETRE |
|---|