| 1 | 1 | 31.9 (ii)\n Supply and erection of 3 core PVC copper insulated and sheathed circular flexible wire:-\n(d) Size 1.50 sqmm (48/0.20mm)\n\n | BI01010001010000000000000515BI0100001118 | 116 | Mtr. |
|---|
| 2 | 2 | 31.12 (a) \n S/E of metal clad switches / B.D.B’s with rage bots on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections :-\n(xvi) Triple pole switch with neutral link 100 Amp. 415 Volts. (Cat. ‘B’)\n\n\n | BI01010001010000000000000515BI0100001119 | 1 | Nos. |
|---|
| 3 | 3 | 31.12 (c)\n S/E of moulded case circuit breaker on wall or on existing pedestal including bonding to earth and necessary connections:-\n(i) 15 amp to 60 amp 415 V. 10 KA 3 phase\n\n\n | BI01010001010000000000000515BI0100001120 | 2 | Nos. |
|---|
| 4 | 4 | 31.17 \n S/E of miniature circuit breaker / isolator 240 / 415 V in the existing distribution board including making necessary connections : -\n(a) Miniature Circuit Breakers of 9 K.A. breaking capacity. \n(ii) 6 Amp. To 32 Amp. (Single Pole)\n | BI01010001010000000000000515BI0100001121 | 15 | Nos. |
|---|
| 5 | 5 | 31.26 \n S/E of U/G Cable loose in existing pipe or trenches complete with necessary connections.\n(Make Universal/ICL/ NICCO/INDANE/Polycab/ Paramount/ Panasonic Anchor)\n(xli) 25 Sqmm 4 Core Cable. (Armoured)\n\n\n | BI01010001010000000000000515BI0100001122 | 160 | Mtr. |
|---|
| 6 | 6 | 31.67\n Supply & erection of mark double walled corrugated (DWC) HDPE pipe laid 1 Mtr. Below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-In-Charge of the work. \n (Make DURAGUARD/REX) CREATOR POLY EXTRUSION (CPE)\n(i) HDPE pipe 63/50 mm outer dia / Inner dia \n\n | BI01010001010000000000000515BI0100001123 | 110 | Mtr. |
|---|
| 7 | 7 | Appd. Item\nSupply & Erection of L.T. spacer (Poly Poline type) 4 wire line spacer on the existing L.T. line including the cost of all labour required to complete the job in all respect upto the entire satisfaction of Engineer-In-Charge).\n\n\n | BI01010001010000000000000515BI0100001124 | 830 | Nos. |
|---|
| 8 | 8 | Appd. Item \nSupply and erection of 45 Watt LED Street Light as per approved make in HSVP with body made of Pressure Die Cast Aluminum housing heat resistance toughened glass and IP66 Ingress Protection and other petty material having more than 100 lpw. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect Separate letter head to be given by the quoting agency). (Including Three Years Free replacement warranty Mtc. at site/Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture. \nMake:- Phillips, Bajaj, GE, LT, Panasonic\n\n | BI01010001010000000000000515BI0100001125 | 2 | Nos. |
|---|
| 9 | 9 | Appd. Item\n Supply/erection/Installation/Commissioning of LED Street Light fixture with wattage range of (25 Watt) with Body made of Pressure Die Cast Aluminum Alloy and Cover made of PMMA (Polymethymethacrylate) having system lumen >120lpw with inbuilt protection against short circuit, Miswiring, over voltage and surge protection of 6kv. The IP of fixture and driver compartment should not be less than IP66. The driver should have THD < 5% and PF >. 95 and Operating Voltage between 100-270V and CRI > 75 and Impace Resistance of IK 08 as per approved make in HSVP. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacuturer required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years replacement warranty, mtc. defect liability period free of cost for three years Including Driver against any manufacturing defect). The logo of company should be embossed on the fixture.\n(Make:- Phillips, Bajaj, GE, LT, PANASONIC, ANCHOR)\n\n | BI01010001010000000000000515BI0100001126 | 14 | Nos. |
|---|
| 10 | 10 | Appd. Item\n Supply, Installation Testing and Commissioning of LED Street Light Fixture with Wattage range of (90 Watt) with body made of Pressure Die Cast Aluminum Alloy and cover made of PMMA (polymethymethacrylate) having system Lumen>120Ipw with inbuilt Protection against Short Circuit, Miswiring, Over Voltage and Surage Protection of 6 KV. The IP of Driver Comparment should not be less than IP66 and same for the LED Comparment. The driving current should be < 700mA with THD < 5% and PF >. 95 and Operating Voltage between 100-270V and CRI > 72 and Impact Resistance of IK 08 as per approved make. The specifications as mentioned above should be duly tested and Mentioned in LM79 Report from Govt. Approved NABL Accredited Labrotary and LM80 Report of LED Chip from the Manufacturer to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-Charges of the work. (Warranty- 3 Years Including Driver against any manufacturing defect) (Including Three Years Free Mtc./Defect Liability Period Free Of Cost). The logo of company should be embossed on the fixture.\nMake:- Philips, Bajaj, GE, LT, Panasonic\n\n | BI01010001010000000000000515BI0100001127 | 3 | Nos. |
|---|
