Supply Of Spares Of Esp For 2X500mw , Dtps Anpara ., Anpara-Uttar Pradesh

Supply Of Spares Of Esp For 2X500mw , Dtps Anpara .- 1 Shock Bar ( 1 Set Consists Of 1 No. Of Angle ( 100X50x8mm ) With 5 Nos. Of Punched Washer ) ( Angle & Punched Washer Moc: Is 2062 ) , Drg. No. 3-79-024-00684 Item 1 50 Set. 2 2 Shock Pad Esp ( Moc: En 8 ) , Drg. No. 3-79-024-00684 Item 2 500 Nos. 3 3 Pin Wheel I ( Pin Wheel Big ) ( 24 Nos. Of Pin Per Wheel ) ( Pin Moc: En 36B ) , Drg. No. 0-79-817-00112 Item 3 25 Nos. 4 4 Pin Wheel – Ii ( Pin Wheel Small ) ( 10 Nos. Of Pin Per Wheel ) ( Pin Moc:En 36B ) Ndrg. No. 0-79-817-00112 N Item 4 25 Nos. 5 5 Shaft1 ( 1 No. Consists Of 1 No. Of Vertical Shafti Nwith Shaft End ) ( Moc: En 8D ) , Drg. No. 0-79-817-00112 N Item 5 10 Nos. 6 6 Shaftii ( Middle ) ( 1 Set Consists Of 1 No. Of Vertical Shaftii+1 No. Of Key ) 80 ( Shaft Moc: En 8D , Key Moc: Is 2062 ) , Drg. No. 0-79-817-00112 Item 6 10 Set. 7 7 Shaftii ( Bottom ) ( 1 Set Consists Of 1 No. Of Vertical Shaftiii+1 No. Of Key ) ( Shaft Moc: En 8D , Key Moc: Is 2062 ) , Drg. No. 0-79-817-00112 Item 7 10 Set. 8 8 Complete Bush Bearing Assembly ( 1 Set Consists Of 1 Set Of Bearing Holder With Gr 4.6 Fasteners+1 Set Of Bush Bearing2 Half Only ) ( Bearing Holder Is 2062 & Nbush Bearing Moc: Is 210 Fg 260 ) , Drg. No. 0-79-817-00112 N Item 8 200 Set. 9 9 Thrust Bearing Pad ( Pad ) ( 1 Set Consists Of 1 No. Of Pad+3 Nos. Of Hex Screw+3 Nos. Of Spring Washer ) ( Moc: Is 2062 ) , Drg. No. 0-79-817-00112 Item 9 10 Set. 10 10 Screen Tube ( Moc: Is 2062 ) , Drg. No. 0-79-817-00112 Item 10 10 Nos. 11 11 Shaft Insulator ( Moc: Alumina Based ) ( L 510 Mm ) , Drg. No. 0-79-817-00112 Item 11 15 Nos. 12 12 Thrust Bearing ( Thrust Bearing With 2 Nos Of Hex Screw M12x50 Gr 4.6+2 Nos Of Spring Washer Gr 8.8 ) ( Moc: En 8D ) , Drg. No. 0-79-817-00112 Item 12 40 Set. 13 13 Shaft Dia: 50Mm L4320mm For Emitting Rapping ( 1 Set Consists Of 1 No. Of Emitting Horizontal Shaft 1+1 No. Of Key ) ( Shaft Moc: En 8D+Key Moc:Is 2062 ) , Drg. No. 2-78-516-03707 Item 13 5 Set. 14 14 Shaft Dia: 50Mm L4250mm For Emitting Rapping ( 1No Consists Of 1 No. Of Shaft Only ) ( Shaft Moc: En 8D ) , Drg. No. 2-78-516-03707 Item 14 5 Nos. 15 15 Inner Arm For Emitting Rapping ( 1 Set Consists Of 1 Set Of Inner Arm+1Set Of M16x45mm Gr 8.8 Fasteners ) ( Inner Arm Moc:Is 2062 ) , Drg. No. 2-78-516-03707 Item 15 400 Nos. 16 16 Outer Arm With Hammer ( Outer Arm For Emitting ) ( Outer Arm Roller Moc : En 8D , Outer Arm 10Mm Flat Moc: Is 2062 ) ( Roller Dia90mm ) , Drg. No. 2-78-516-03707 Item 16 400 Nos. 17 17 Plan Bearing For Emitting Rapping ( Plain Bearing With 4.6 Fasteners M16x120mm ) ( Plain Bearing Moc: Is 210 Fg 150 ) , Drg. No. 2-78-516-03707 Item 17 600 Nos. 18 18 Set Ring For Emitting Rapping ( Moc: En 8D ) , Drg. No. 2-78-516-03707 Item 18 30 Nos. 19 19 Sleeve Tube1 ( Sleeve Tube For Emitting Rapping ) ( Moc: Sa 106 ) , Drg. No. 2-78-516-03707 Item 19 20 Nos. 20 20 Grip Coupling For Emitting Drive Arrangement ( Arm Moc: Is 2062 & Hub Moc: Is 2062 ) , Drg. No. 1-79-117-00596 Item 20 40 Nos. 21 21 Shaft Dia: 50Mm, L4385mm For Collecting Rapping ( Moc: En 8D ) , Drg. No. 2-79-725-01871 Item 21 5 Nos. 22 22 Shaft Dia: 50Mm, L4085mm For Collecting Rapping ( Moc: En 8D ) , Drg. No. 2-79-725-01871 Item 22 5 Nos. 23 23 Shaft Dia: 50Mm, L4190mm Mfor Collecting Rapping ( Moc: En 8D ) , Drg. No. 2-79-725-01871 Item 23 5 Nos. 24 24 Shaft Dia: 50Mm, L790mm For Collecting Rapping ( 1 Set Consists Of 1 No. Of Shaft+1 No. Of Key ) ( Shaft Moc: En 8D & Key Moc: Is 2062 ) , Drg. No. 2-79-725-01871 Item 24 5 Set. 25 25 Inner Arm For Collecting Rapping ( 1 Set Consists Of 1 Set Of Inner Arm+1 Set Of M16x45mm Gr 8.8 Fasteners ) ( Inner Arm Moc: Is 2062 ) , Drg. No. 2-79-725-01871 Item 25 500 Nos. 26 26 Outer Arm-2 With Hammer For Collecting Rapping ( Outer Arm Roller Moc: En 8D , Outer Arm 10Mm Flat Moc: Is 2062 ) ( Roller Hammer Dia-115Mm ) , Drg. No. 2-79-725-01871 Item 26 500 Nos. 27 27 Set Ring For Collecting Rapping ( Moc: En 8D ) , Drg. No. 2-79-725-01871 Item 27 20 Nos. 28 28 Sleeve Tube1 ( Sleeve Tube For Collecting Rapping ) ( Moc: Sa 106 ) , Drg. No. 2-79-725-01871 Item 28 20 Nos. 29 29 Plan Bearing For Collecting Rapping ( Plain Bearing With 4.6 Fasteners M16x120mm ) ( Plain Bearing Moc: Is 210 Fg 150 ) , Drg. No. 2-79-725-01871 Item 29 300 Nos. 30 30 U Guide ( Moc: Is 2062 ) , Drg. No. 2-79-725-01871 Item 30 10000 Nos. 31 31 Inner Arm For Gd Rapping ( 1 Set Consists Of 1 Set Of Inner Arm+1 Set Of M16x45mm Gr 8.8 Fasteners ) ( Inner Arm Moc: Is 2062 ) , Drg. No. 2-78-509-03796 Item 31 25 Nos. 32 32 Outer Arm – I Gd Rapping ( Outer Arm Roller Moc : En 8D , Outer Arm 10Mm Flat Moc: Is 2062 ) ( Roller Dia-115Mm ) , Drg. No. 2-78-509-03796 Item 32 25 Nos. 33 33 Set Ring For Gd Rapping ( Moc: En 8D ) , Drg. No. 2-78-509-03796 Item 33 5 Nos. 34 34 Shaft-1 Dia: 50Mm, L3805mm For Gd Rapping ( Moc: En 8D ) , Drg. No. 2-78-509-03796 Item 34 2 Nos. 35 35 Shaft-1 Dia: 50Mm, L3990mm For Gd Rapping ( Moc: En 8D ) , Drg. No. 2-78-509-03796 Item 35 2 Nos. 36 36 Sleeve Tube-1 ( Sleeve Tube For Gd Rapping ) ( Moc: Sa 106 ) , Drg. No. 2-78-509-03796 Item 36 2 Nos. 37 37 Shaft Dia: 50Mm, L1490mm For Gd Rapping ( 1 Set Consists Of 1 No. Of Shaft+1 No. Of Key ) ( Shaft Moc: En 8D & Key Moc: Is 2062 ) , Drg. No. 2-78-509-03796 Item 37 2 Set. 38 38 Emitting Electrode For Esp ( Wire Dia : 2.7Mm : Moc: Ss 304L ) Ndrg. No. 0-78-006-00781 Item 38 500 Nos.

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	17-Nov-2020	Tender Extension	Date	01-12-2020
2	04-Dec-2020	Tender date extension	Date	15-12-2020

INR 4720 /-

INR 37000.0 /-

INR 36.63 Lakhs /-

Name of Work: Supply of spares of ESP for 2x500MW, DTPS Anpara.
	Sl. No.	Item Description (ESP Size: 4xFAA-10x45H-2x90135-2)	Item Code / Make	Quantity	Units
1	1	SHOCK BAR (1 SET CONSISTS OF 1 No. OF ANGLE (100X50X8mm) WITH 5 Nos. OF PUNCHED WASHER) (ANGLE & PUNCHED WASHER MOC: IS 2062), Drg. No. 3-79-024-00684	Item 1	50	Set.
2	2	SHOCK PAD ESP (MOC: EN 8), Drg. No. 3-79-024-00684	Item 2	500	Nos.
3	3	PIN WHEEL I (PIN WHEEL BIG) (24 Nos. OF PIN per WHEEL)(PIN MOC: EN 36B), Drg. No. 0-79-817-00112	Item 3	25	Nos.
4	4	PIN WHEEL – II (PIN WHEEL SMALL) (10 Nos. OF PIN per WHEEL)(PIN MOC:EN 36B)\nDrg. No. 0-79-817-00112\n	Item 4	25	Nos.
5	5	SHAFT1 (1 No. CONSISTS OF 1 No. OF VERTICAL SHAFTI\nWITH SHAFT END) (MOC: EN 8D), Drg. No. 0-79-817-00112\n	Item 5	10	Nos.
6	6	SHAFTII (MIDDLE) (1 SET CONSISTS OF 1 No. OF VERTICAL SHAFTII+1 No. OF KEY)80 (SHAFT MOC: EN 8D , KEY MOC: IS 2062), Drg. No. 0-79-817-00112	Item 6	10	Set.
7	7	SHAFTII (BOTTOM) (1 SET CONSISTS OF 1 No. OF VERTICAL SHAFTIII+1 No. OF KEY) (SHAFT MOC: EN 8D , KEY MOC: IS 2062), Drg. No. 0-79-817-00112	Item 7	10	Set.
8	8	Complete BUSH BEARING ASSEMBLY (1 SET CONSISTS OF 1 SET OF BEARING HOLDER WITH Gr 4.6 FASTENERS+1 SET OF BUSH BEARING2 HALF ONLY) (BEARING HOLDER IS 2062 &\nBUSH BEARING MOC: IS 210 FG 260), Drg. No. 0-79-817-00112\n	Item 8	200	Set.
9	9	THRUST BEARING PAD (PAD) (1 SET CONSISTS OF 1 No. OF PAD+3 Nos. OF HEX SCREW+3 Nos. OF SPRING WASHER) (MOC: IS 2062), Drg. No. 0-79-817-00112	Item 9	10	Set.
10	10	SCREEN TUBE (MOC: IS 2062), Drg. No. 0-79-817-00112	Item 10	10	Nos.
11	11	SHAFT INSULATOR (MOC: ALUMINA BASED) (L 510 mm), Drg. No. 0-79-817-00112	Item 11	15	Nos.
12	12	THRUST BEARING (THRUST BEARING WITH 2 NOS OF HEX SCREW M12X50 GR 4.6+2 NOS OF SPRING WASHER GR 8.8) (MOC: EN 8D), Drg. No. 0-79-817-00112	Item 12	40	Set.
13	13	SHAFT DIA: 50mm L4320mm FOR EMITTING RAPPING (1 SET CONSISTS OF 1 No. OF EMITTING HORIZONTAL SHAFT 1+1 No. OF KEY) (SHAFT MOC: EN 8D+KEY MOC:IS 2062), Drg. No. 2-78-516-03707	Item 13	5	Set.
14	14	SHAFT DIA: 50mm L4250mm FOR EMITTING RAPPING (1NO CONSISTS OF 1 No. OF SHAFT ONLY) (SHAFT MOC: EN 8D), Drg. No. 2-78-516-03707	Item 14	5	Nos.
15	15	INNER ARM FOR EMITTING RAPPING (1 SET CONSISTS OF 1 SET OF INNER ARM+1SET OF M16X45mm Gr 8.8 FASTENERS) (INNER ARM MOC:IS 2062), Drg. No. 2-78-516-03707	Item 15	400	Nos.
16	16	OUTER ARM WITH HAMMER (OUTER ARM FOR EMITTING) (OUTER ARM ROLLER MOC : EN 8D , OUTER ARM 10mm FLAT MOC: IS 2062) (ROLLER Dia90mm), Drg. No. 2-78-516-03707	Item 16	400	Nos.
17	17	PLAN BEARING FOR EMITTING RAPPING (PLAIN BEARING WITH 4.6 FASTENERS M16X120mm) (PLAIN BEARING MOC: IS 210 FG 150), Drg. No. 2-78-516-03707	Item 17	600	Nos.
18	18	SET RING FOR EMITTING RAPPING (MOC: EN 8D), Drg. No. 2-78-516-03707	Item 18	30	Nos.
19	19	SLEEVE TUBE1 (SLEEVE TUBE FOR EMITTING RAPPING) (MOC: SA 106), Drg. No. 2-78-516-03707	Item 19	20	Nos.
20	20	GRIP COUPLING FOR EMITTING DRIVE ARRANGEMENT (ARM MOC: IS 2062 & HUB MOC: IS 2062), Drg. No. 1-79-117-00596	Item 20	40	Nos.
21	21	SHAFT DIA: 50mm, L4385mm FOR COLLECTING RAPPING (MOC: EN 8D), Drg. No. 2-79-725-01871	Item 21	5	Nos.
22	22	SHAFT DIA: 50mm, L4085mm FOR COLLECTING RAPPING (MOC: EN 8D), Drg. No. 2-79-725-01871	Item 22	5	Nos.
23	23	SHAFT DIA: 50mm, L4190mm mFOR COLLECTING RAPPING (MOC: EN 8D), Drg. No. 2-79-725-01871	Item 23	5	Nos.
24	24	SHAFT DIA: 50mm, L790mm FOR COLLECTING RAPPING (1 SET CONSISTS OF 1 No. OF SHAFT+1 No. OF KEY) (SHAFT MOC: EN 8D & KEY MOC: IS 2062), Drg. No. 2-79-725-01871	Item 24	5	Set.
25	25	INNER ARM FOR COLLECTING RAPPING (1 SET CONSISTS OF 1 SET OF INNER ARM+1 SET OF M16X45mm Gr 8.8 FASTENERS) (INNER ARM MOC: IS 2062), Drg. No. 2-79-725-01871	Item 25	500	Nos.
26	26	OUTER ARM-2 WITH HAMMER FOR COLLECTING RAPPING (OUTER ARM ROLLER MOC: EN 8D , OUTER ARM 10mm FLAT MOC: IS 2062)(ROLLER HAMMER Dia-115mm), Drg. No. 2-79-725-01871	Item 26	500	Nos.
27	27	SET RING FOR COLLECTING RAPPING (MOC: EN 8D), Drg. No. 2-79-725-01871	Item 27	20	Nos.
28	28	SLEEVE TUBE1 (SLEEVE TUBE FOR COLLECTING RAPPING) (MOC: SA 106), Drg. No. 2-79-725-01871	Item 28	20	Nos.
29	29	PLAN BEARING FOR COLLECTING RAPPING (PLAIN BEARING WITH 4.6 FASTENERS M16X120mm) (PLAIN BEARING MOC: IS 210 FG 150), Drg. No. 2-79-725-01871	Item 29	300	Nos.
30	30	U GUIDE (MOC: IS 2062), Drg. No. 2-79-725-01871	Item 30	10000	Nos.
31	31	INNER ARM FOR GD RAPPING (1 SET CONSISTS OF 1 SET OF INNER ARM+1 SET OF M16X45mm Gr 8.8 FASTENERS) (INNER ARM MOC: IS 2062), Drg. No. 2-78-509-03796	Item 31	25	Nos.
32	32	OUTER ARM – I GD RAPPING (OUTER ARM ROLLER MOC : EN 8D , OUTER ARM 10mm FLAT MOC: IS 2062) (ROLLER Dia-115mm), Drg. No. 2-78-509-03796	Item 32	25	Nos.
33	33	SET RING FOR GD RAPPING (MOC: EN 8D), Drg. No. 2-78-509-03796	Item 33	5	Nos.
34	34	SHAFT-1 DIA: 50mm, L3805mm FOR GD RAPPING (MOC: EN 8D), Drg. No. 2-78-509-03796	Item 34	2	Nos.
35	35	SHAFT-1 DIA: 50mm, L3990mm FOR GD RAPPING (MOC: EN 8D), Drg. No. 2-78-509-03796	Item 35	2	Nos.
36	36	SLEEVE TUBE-1 (SLEEVE TUBE FOR GD RAPPING) (MOC: SA 106), Drg. No. 2-78-509-03796	Item 36	2	Nos.
37	37	SHAFT DIA: 50mm, L1490mm FOR GD RAPPING (1 SET CONSISTS OF 1 No. OF SHAFT+1 No. OF KEY) (SHAFT MOC: EN 8D & KEY MOC: IS 2062), Drg. No. 2-78-509-03796	Item 37	2	Set.
38	38	EMITTING ELECTRODE FOR ESP (WIRE DIA : 2.7mm : MOC: SS 304L )\nDrg. No. 0-78-006-00781	Item 38	500	Nos.