Military Engineer Services-MES has published Repairs To Joineries Flooring Roads Steel Doors Fencing And Gate And Repairs To Rolling Shutters At Navy And Coast Guard Units At Minicoy Under Ge Navy Lakshadweep. Submission Date for this Tender is 07-11-2020. Road Work Tenders in MINICOY Lakshadweep. Bidders can get complete Tender details and download the document.
Name of Work : REPAIRS TO JOINERIES FLOORING ROADS STEEL DOORS FENCING AND GATE AND REPAIRS TO ROLLING SHUTTERS AT NAVY AND COAST GUARD UNITS AT MINICOY UNDER GE NAVY LAKSHADWEEP | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engineer in charge. | 5 | Each | |
2 | 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed by Engineer in charge. | 5 | Each | |
3 | 3 | Taking down shutters of any description not exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed by Engineer in charge. | 8 | Each | |
4 | 4 | Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and as directed by Engineer in charge. | 5 | Each | |
5 | 5 | Supply and Fix 2nd class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer in charge. | 0.6 | Cum | |
6 | 6 | Supply and fix factory made plain framed, panelled shutter 35mm thick of 2nd class hard wood (any number of panels) with panels of timber flat on both sides feather edges or panel of 9mm BWP commercial ply over 12mm thick veneered particle board with commercial face veneers fixed to chowkhat. the size of rail and stile as per IS:1003 (Part 1), kiln seasoned and chemically pressure treated complete all as specified and as directed by engineer in charge. | 4 | Sqm | |
7 | 7 | Supply and fix 30mm thick 2nd class wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified and as directed by Engineer in charge. | 4 | Sqm | |
8 | 8 | Hacking out old broken glass (any thickness, size, quality or description)\nfrom wooden/metal/Almn frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer in charge. Note:- The glass shall be measured and paid separately as supply only item. | 20 | Sqm | |
9 | 9 | Supply only sheet glass, 4mm thick ordinary quality in square exc. 0.50Sqm in each pane complete all as specified and as directed by Engineer in charge. | 20 | Sqm | |
10 | 10 | Supply and fixing of powder coated anodised aluminium frame section (minimum thickness of powder coating 50 micron), of door, windows, ventilation, partion wall, cup board with one or more rebates including joinging cleats for fixing etc. complte all as specified and as directed by Engineer in charge. | 105 | Kg | |
11 | 11 | Providing and fixing powder coated anodised aluminium door shutters (minimum thickness of powder coating 50 micron),, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door, hinges anodised aluminium snap beading,screws etc complete all as specified and as directed by Engineer in charge. | 10 | Sqm | |
12 | 12 | Supply and fix anodised aluminium window and ventilator shutters with powder coated (minimum thickness of powder coating 50 micron), side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised snap beading, screws, anodised aluminium fittings such as IMEX hinges type B-21, 100 mm long (2 nos) complete all as specified and as direcetd by Engineer in charge. | 1.5 | Sqm | |
13 | 13 | Supply and fix Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weigh between 61 to 80 kg and fixed complete all as specified and directed by Engineer in charge. | 5 | Each | |
14 | 14 | Supply and fix in repair Aluminium (extruded section body) Door closer hydraulically regulated, designation No. 3 universal type suitable for door shutters of 851 to 1000 mm in width and weigh between 61 to 80 kg and fixed complete all as specified and directed by Engineer in charge. | 10 | Each | |
15 | 15 | Supply and fix of brass, 2 levers mortice lock, vertical type of size 100 mm complete all as specified and as directed by Engineer in charge. | 5 | Each | |
16 | 16 | Supply and fix in repairs of brass, 2 levers mortice lock, vertical type of size 100 mm complete all as specified and as directed by Engineer in charge. | 25 | Each | |
17 | 17 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed by Engineer in charge. | 10 | RM | |
18 | 18 | Supply and Fix factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified andas directed by engineerin charge. | 3 | Sqm | |
19 | 19 | Cutting holes in brick work built in cement mortar for inserting hold fast and making good dismantled portion in CM 1:3 depth of cutting exc half brick but n. exc one brick complete all as specified and as directed by Engineer in charge. | 32 | Each | |
20 | 20 | Supply and Fix Stainless steel wire cloth. 0.36mm nominal dia of wire\nand average width of aperture 1.40mm and fixed with stainless steel wire staples and including wooden cover filltes complete all as specified and as directed by Engineer in charge. | 3 | Sqm | |
21 | 21 | Supply and fix in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and including wooden cover fillets complete all as specified and directed by Engineer in charge. | 60 | Sqm | |
22 | 22 | Material and labour for Preparing new or previously untreated wood surfaces of any description over 10 cm width or girth and applying two coats of synthetic enemel paint over a coat of pink primer complete all as specified and as directed by Engineer in charge. | 8.8 | Sqm | |
23 | 23 | Material and labour for Preparing old wood surfaces of any description over 10 cm width or girth and applying one coat of synthetic enemel paint complete all as specified and as directed by Engineer in charge. | 50 | Sqm | |
24 | 24 | Supply and fix 300 mm length aluminium alloy anodised sliding door bolt with hasp and staple (Bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy complete all as specified and directed by Engineer in charge. | 12 | Each | |
25 | 25 | Supply and fix 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer in charge. | 9 | Each | |
26 | 26 | Supply and fix 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer in charge. | 10 | Each | |
27 | 27 | Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer in charge. | 5 | Each | |
28 | 28 | Supply and fix aluminium alloy handles, fabricated type, extruded section, size of handle 150mm complete all as specified and directed by Engineer in charge. | 10 | Each | |
29 | 29 | Supply and fix in repair aluminium alloy handles, fabricated type, extruded section, size of handle 150mm complete all as specified and directed by Engineer in charge. | 10 | Each | |
30 | 30 | Supply and fix in repair aluminium alloy handles, fabricated type, extruded section, size of handle 100mm complete all as specified and directed by Engineer in charge. | 5 | Each | |
31 | 31 | Supply and fix butt hinges 125 mm mild steel hinges medium weight and fixed complete all as specified and as directed by Engineer in charge. | 18 | Each | |
32 | 32 | Supply and fix in repairs butt hinges 125 mm extruded aluminium alloy with glavanised mild steel hige pin, andodised and fixed, type B-21 hinges medium weight and fixed complete all as specified and as directed by Engineer in charge. | 15 | Each | |
33 | 33 | Supply and fix butt hinges 100 mm mild steel hinges medium weight and fixed complete all as specified and as directed by Engineer in charge. | 6 | Each | |
34 | 34 | Supply and fix in repairs butt hinges 100 mm extruded aluminium alloy with glavanised mild steel hige pin, andodised and fixed, type B-21 hinges medium weight and fixed complete all as specified and as directed by Engineer in charge. | 9 | Each | |
35 | 35 | Supply and Fix 300 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified and as directed by Engineer in charge. | 10 | Each | |
36 | 36 | Supply and fix floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, 140mm long complete all as specified and directed by Engineer in charge. | 40 | Each | |
37 | 37 | Supply and fix in repair floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, 140mm long complete all as specified and directed by Engineer in charge. | 15 | Each | |
38 | 38 | Demolition of brick work/PCC block masonry built in cement mortar complete all as specified and directed by Engineer in charge. | 7 | Cum | |
39 | 39 | Material and Labour for Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed by Engineer in charge. | 5 | Cum | |
40 | 40 | M&L Brick work with sub class 'B' bricks straight or curved on plan ex 6 m mean radius built in CM 1:6 complete all as specified and as directed by Engineer in charge. | 2 | Cum | |
41 | 41 | Taking down cement plaster of any description from brick,concrete or stone walls including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed by Engineer in charge. | 60 | Sqm | |
42 | 42 | Material and labour for rendering 10mm thick cement plaster in CM 1:6 on fair face of brick work or block masonry including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer in charge. | 110 | Sqm | |
43 | 43 | Material and labour for rendering 15mm thick cement plaster in CM 1:4 on other than fair face of brick work or concrete surface including finishing the surface even and smooth without using extra cement with @ 3% of water proofing compound complete all as specified and as directed by Engineer in charge. Note:- Water proofing compound will be measured and paid seperately. | 100 | Sqm | |
44 | 44 | Supply only Integral waterproofing compound complete all as specified and as directed by engineer in charge. | 28 | Kg | |
45 | 45 | Material and labour for preparing newly plastered surfaces of wall and applying two coats of oil bound distember over a coat of alkali resistant primer complete all as specified and directed by Engineer in charge. | 70 | Sqm | |
46 | 46 | Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed by Engineer in charge. | 40 | Sqm | |
47 | 47 | Material and labour for Preparation of new plaster surfaces in walls soffits, facia roof and applying two coats of weather proof acrylic based paint 100% arylic over a coat of primer complete all as specified and as directed by Engineer in charge. | 100 | Sqm | |
48 | 48 | Demolition of cement concrete (unreinforced) of any description and in any position above or below ground level complete and cleaning of the premises complete all as specified and as directed by Engineer in charge. | 31 | Cum | |
49 | 49 | Material and labour for plain cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) 100 mm thick as in floor finished even and fair top wearing surface complete all as specified and directed by Engineer in charge. | 150 | Sqm | |
50 | 50 | Material and labour for plain cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) 75 mm thick as in sub base complete all as specified and directed by Engineer in charge. | 125 | Sqm | |
51 | 51 | Material and labour for plain cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) 75 mm thick finished even and smooth without using extra cement as in plinth protection complete all as specified and directed by Engineer in charge. | 50 | Sqm | |
52 | 52 | Material and labour for Forming Construction joint 30mm deep x 10mm wide filled\nwith grade 'A' sealing compound complete all as specified and as directed by Engineer in Charge. | 4 | XRm | |
53 | 53 | Material and Labour for providing machine pressed precast conctete interlocking paver block with pigments, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed by Engineer in charge. | 75 | Sqm | |
54 | 54 | Material and Labour for sand filling under floors including necessary watering and consolidation complete all as specified and as directed by Engineer in charge. | 4 | Cum | |
55 | 55 | Material and labour for plain cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in copings, benching,kerbs water troughs and throating and similar works etc complete all as specified and directed by Engineer in charge. | 3 | Cum | |
56 | 56 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer in charge. | 270 | Sqm | |
57 | 57 | Material and labour for Chequred cement concrete tiles 20cmx20cmx25mm thick set,jointed and pointed in neat cement slurry in floors with grey cement and pigments including 20mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 65 | Sqm | |
58 | 58 | Dismantling of stone slabs and tiles of any description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and as directed by Engineer in charge. | 7 | XSqm | |
59 | 59 | Material and Labour for 20 mm thick Granite slab (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 15 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as direted by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 15 | Sqm | |
60 | 60 | Material and labour for pre polished kota stone slab as in flooring 20 to25 mm thick in floor including screed bed 15mm thick or beding layer for laying floor finishes CM 1:6 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified and as directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 40 | Sqm | |
61 | 61 | Material and labour for machine cut kota stone slab as in flooring 20 to25 mm thick riser of steps, skirting, dado and pillar laid over including 10mm thick rendering in CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified and as directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 5 | Sqm | |
62 | 62 | Rounding to edges of stone slab one edge, such as in steps, cooking platform, and other similar situation complete all as specified and as directed by Engineer in charge. | 25 | Rm | |
63 | 63 | Material and labour for vitrified (light shade) tiles 9mm thick (Square/rectangle) polished of size (600mm x600mm) in floor and skiriting set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 115 | Sqm | |
64 | 64 | All as per item no 63 above but in vertical surfaces over 10mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 10 | Sqm | |
65 | 65 | Material and labour for non skid coloured ceramic tiles 7 to 8mm thick (Square or rectangular as directed by the Engineer in Charge) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in coloured or white cement to match the coloured tiles over and including screed bed 15mm thick in CM 1:6 complete all as specified and directed by Engineer in charge. Note: Quoted rate shall be inclusive of screed bed | 30 | Sqm | |
66 | 66 | Material and labour for glazed coloured ceramic tiles 300mm X 450mm X 7mm / 300mm X 600mm X 7mm thick in vertical surfaces such as skirting or dado set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the coloured tiles over and including a backing coat 10mm thick in CM 1:4 complete all as specified and directed by Engineer in charge. Note: Quoted rate shall be inclusive of backing coat | 50 | Sqm | |
67 | 67 | Material and labour for Repair to steel rolling shutters ,push pull or manual type with repair of ball bearing ,taking down top cover , anchoring rod, greasing ,preparation of old painted steel surfaces & applying 2 coats epoxy paint over one coat Zinc primer ; erected in position as indicated, complete all as specified and as directed by Engineer in charge. | 11 | Each | |
68 | 68 | Material and labour for MS flat for hold fast Conforming to Fe-310-0 or Fe-410-0 as specified, fixed in position as indicated, complete all as specified and as directed by Engineer in charge. | 3 | Kg | |
69 | 69 | Material and Labour for running welding in repairs of mild steel gates, grills, manhole covers etc, thickness of metal to be welded exc 9 mm but n exc 20 mm complete all as specified and as directed by Engineer in charge. | 70 | XCm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail