Purchasing Of 2 Mini Tipper For Garbage Disposal In Town Panchayath Kamatagi-Karnataka

Purchasing Of 2 Mini Tipper For Garbage Disposal In Town Panchayath Kamatagi 1. the supply of 2.0 cum mini auto tipper : specification 1) type of fuel: diesel, 2) vehicle emission complaince: bs-iv, 3) max engine power bhp 16 (bhp@rpm), 4) type of tipper: tipper body should be from original equipment manufacturer. garbage tipper 2 cu.m fully company built-up closed box tipper bs-iv with hard top cover & dry wet partition, front engine, pto driven hydraulic tipping bs6 system,parabolic leaf spring suspension with 2 nos. double acting telescopic hydraulicshock absorbers at front and rear, body floor thickness of 2mm and body side panel thickness of 1.6mm 5) main engine capacity (cc): 702 6) type of chassis frame : ladder type frame with inverted hat section long members 7) category of vehicle for which chassis to be used: light capacity commercial vehicles, 8) max engine torque: 39 (nm@rpm) 9) main engine aspiration : natural aspiration 10) no. of cylinder in main engine: 2 (nos) 11) gradeability of vehicle with load( %): 16.38% 12) gradeability of vehicle without load : 18%, 13) wheel base (mm) : 2100 millimeter 15) kerb weight (kg): kilogram 16) gross vehicle weight (kg): 1700 kilogram, 17) no of axle (nos): 2 nos, 18) ground clearance (mm): 160 millimeter 19) axle configuration (number of outside tyre x number of driving tyre): 4x2, 20) type of front axle and suspension:independent suspension with coil spring wize 2 nos. double acting telescopic hydraulic shock absorbers at front, 20) type of rear axle and suspension system: salisbury type rigid axle with semi-elliptical leaf springs and 2 nos. double acting telescopic hydraulic shock absorbers, 21) type of bis marked vehicle tyre: radial, 22) chassis transmission system: manual, 23) number of speed/ forward gears: 4, 24) type of steering: manual, 25) turning radius,min (mm):4300 millimeter, 26) speed governers: if applicable to be supplied, 27) abs fitted:if applicable to be supplied, 28)front vehicle brake: disc brake hydraulic, dual circuit diagonal split with tandem master cylinder acting on all wheels with automatic wear adjusters 29) rear vehicle brake: drum brake hydraulic, dual circuit diagonal split with tandem master cylinder acting on all wheels 30) tipping angle (degree): max 48, 31) tipper container 32) capacity/volume(cubic metres): 2 33) length of chassis (mm): 3800 millimeter 34) width of chassis (mm): 1500 millimeter 35) height of chassis (mm):1845 millimeter 36) tipper body pivot :1546 millimeter: 37) overall height of tipper from ground (mm): 1489 millimeter 38) body plate thickness (mm): 16, 39) main frame thickness (mm) : 3 millimeter 40) tipping hydraulic cylinders(make): canara/dantal/wipro/vickers/ut or equivalent reputed make, 41) hydraulic system driven by: main engine, 42)tipper container material: mild steel 43) thickness of sheet from tipper collector container made (mm), 44) 1.6 millimeter, 45) dumping height (mm): max 352 millimeter, 46) inner surface body coating: anti carrosive/rust coating 47) waranty: 5 years waranty including pump, gear box, cuplings, rams,seals and countroling units waranty servises should be of within 7 days if it is more than 7 days liqudate damages will be collected.,

INR 500 /-

INR 11 Lakhs /-