Zilla Parishad-ZP has published Construction Of Community Centre In Connection With Construction Of Cottage , Community Toilets , Landscaping , Beautification And Exploring Boating And Fisheries Project Etc . Adjacent To Nunia Jore At Nirala Hot Spring , Paniphala Within Barabani. Submission Date for this Tender is 04-11-2020. Commercial Marine Vehicle Tenders in Within Barabani block West Bengal. Bidders can get complete Tender details and download the document.
| Schedule of probable items of work / Estimate for the Contruction of Community Centre in connection with construction of cottage , community toilets , landscaping ,beautification and exploring boating and fisheries project etc. adjacent to Nunia Jore at Nirala Hot Spring ,Paniphala within Barabani Block in the District of Paschim Bardhaman for 2020-2021. Estimate No.: 77 of 2020-2021 Rates are as per P.W.D Schedule of Rates (vol-I and vol-II), effective from 30.08.2018 with 11th Addenda & Corrigenda . | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. \na) Depth of excavation not exceeding 1,500 mm.\n | BI01010001010000000000000515BI0100001131 | 124.47 | %Cum |
| 2 | 2 | Extra for excavation of moorum | BI01010001010000000000000515BI0100001132 | 124.47 | %Cum |
| 3 | 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer\ncomplete. (Payment to be made on the basis of measurement of finished quantity of work) Considering 1/3 of Earth excavation\n | BI01010001010000000000000515BI0100001133 | 41.49 | %Cum |
| 4 | 4 | Filling in foundation or plinth by FINE sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)\n\n | BI01010001010000000000000515BI0100001134 | 46.15 | %Cum |
| 5 | 5 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches\nGround Floor\n | BI01010001010000000000000515BI0100001135 | 221.2 | Sq.M. |
| 6 | 6 | Pre-Constructional Anti-termite measures:\n(c) Anti termite treatment to the top surface of the consolidated earth within plinth walls with chemical emulsion by admixing chloropyrofos emulsifiable\nconcentrates (1% concentration) with water by weight at the rate of 5 Litres per sq. m. of the surface before sand bed or sub-grade is laid. Holes upto 50 mm. to\n75 mm. deep at 150 mm. centre to centre both ways shall be made with 12 mm, diameter mild steel rod on the surface to facilitate saturation of the soil with the\nchemical emulsion. The work shall be carried out as per specification described in para 6.4 of code IS- 6313 (part -II) 1981. ( Mode of measurment will be per Sq.m of plan area of plinth treated.)\n | BI01010001010000000000000515BI0100001136 | 73.735 | SQ M. |
| 7 | 7 | Cement concrete with graded stone ballast (40 mm size excluding shuttering)\nIn ground floor\n(A) [Pakur Variety]\nP.C.C 1:3:6\nPWD SOR 3rd corrigendum 04.06.2018 page 17 ,sl-45\nPWD SOR 2017 page 34 ,I-22 | BI01010001010000000000000515BI0100001137 | 6.22 | Cum |
| 8 | 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes\na) Pakur Variety\nGround Floor \nPWD SOR Vol-I w. e. f. 1.11.2017, Page 04, Item No.24\n PWD SOR 3rd corrigendum 04.06.2018 page 10 ,sl-27 | BI01010001010000000000000515BI0100001138 | 10.37 | Cum |
| 9 | 9 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.\n(i) Pakur Variety\n(c) Brickworks, Concrete Works etc.\nGROUND FLOOR | BI01010001010000000000000515BI0100001139 | 115.59 | Cum |
| 10 | 10 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001140 | 6.42 | Cum |
| 11 | 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)\n(f) 25 mm to 30 mm shuttering without staging in foundation\nFOUNDATION LEVEL | BI01010001010000000000000515BI0100001141 | 254.26 | SqM |
| 12 | 12 | a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.\nGROUND FLOOR | BI01010001010000000000000515BI0100001142 | 400.12 | SqM |
| 13 | 13 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001143 | 64.04 | SqM |
| 14 | 14 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. \n(a) For works in foundation, basement and upto roof of ground floor/upto 4 m\nTor steel/Mild Steel\nSAIL/ TATA/RINL\nGround Floor\nPWD SOR Vol-I w. e. f. 1.11.2017, Page 43, Item No. 40\n2ND CORRIGENDA & ADDENDA,Page-1\n(see Rate Analysis page ) | BI01010001010000000000000515BI0100001144 | 14.97 | M.T. |
| 15 | 15 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001145 | 0.83 | M.T. |
| 16 | 16 | Brick work with 1st class bricks in cement mortar (1:6)\na) In foundation and plinth\n\n | BI01010001010000000000000515BI0100001146 | 5.07 | Cu.M. |
| 17 | 17 | DO-DO-DO\nGr. FLOOR | BI01010001010000000000000515BI0100001147 | 29.41 | Cu.M. |
| 18 | 18 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001148 | 19.91 | Cu.M. |
| 19 | 19 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.\n-In Super Structure, Ground Floor.\n | BI01010001010000000000000515BI0100001149 | 85.75 | SqM |
| 20 | 20 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary \n\n | BI01010001010000000000000515BI0100001150 | 306.47 | SqM |
| 21 | 21 | 20 mm thick plaster 1:6 Inside Plaster \nGround Floor | BI01010001010000000000000515BI0100001151 | 42.92 | SqM |
| 22 | 22 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001152 | 177.14 | SqM |
| 23 | 23 | 10 MM. THK. CEILING PLASTER -----(1:4)\nGround Floor | BI01010001010000000000000515BI0100001153 | 22.78 | SqM |
| 24 | 24 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001154 | 137.79 | SqM |
| 25 | 25 | 15 mm thick plaster 1:6 Outside plaster\nGROUND FLOOR | BI01010001010000000000000515BI0100001155 | 151.21 | SqM |
| 26 | 26 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001156 | 483.61 | SqM |
| 27 | 27 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick)\nINTERIOR SURFACE\n | BI01010001010000000000000515BI0100001157 | 483.61 | %Sq.M. |
| 28 | 28 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.\n(In Ground Floor)\n(b) Two Coat\ni) Water based interior grade Acrylic Primer\n | BI01010001010000000000000515BI0100001158 | 65.7 | %Sq.M. |
| 29 | 29 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001159 | 483.61 | Sq.M. |
| 30 | 30 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty: \n(Two coats) \nii) Luxury Quality\nGround Floor\n | BI01010001010000000000000515BI0100001160 | 65.7 | Sq.M. |
| 31 | 31 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001161 | 137.79 | %SqM |
| 32 | 32 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.\nIn Ground Floor:\nAdd extra for each additional floor over the rate for ground floor onitems (3 to 6) and item (8), (15 to17) of subhead A\n(a) One Coat\n\n | BI01010001010000000000000515BI0100001162 | 151.21 | %SqM |
| 33 | 33 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001163 | 137.79 | SqM |
| 34 | 34 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.\nIn Ground floor (Two Coat)\nAdd extra for each additional floor over the rate for ground floor on items (3 to 6) and item (8), (15 to17) of subhead A\na) Normal Acrylic Emulsion\nGr. Flr\n | BI01010001010000000000000515BI0100001164 | 137.79 | SqM |
| 35 | 35 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001165 | 144.5 | SqM |
| 36 | 36 | Extra for fluted, corrugated or ribbed plaster (over rate of corresponding rate of plaster). (Cement 0.135 Cu.m/100Sq.m)\n | BI01010001010000000000000515BI0100001166 | 12.5 | SqM |
| 37 | 37 | Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately].\n\n | BI01010001010000000000000515BI0100001167 | 14.865 | SqM |
| 38 | 38 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc\n Floor \nWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m \n(b) Area of each tile above 0.09 Sq.m\nColoured decorative\nGr. Floor\n\n | BI01010001010000000000000515BI0100001168 | 80.43 | SqM |
| 39 | 39 | Wall\nWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick\ncement slurry at back side of tiles using cement @ 2.91\nKg/Sq.m & joint filling using white cement slurry @\n0.20kg/Sq.m.\n(b) Area of each tile above 0.09 Sq.m\n(i) Coloured decorative\nGround Floor :\n | BI01010001010000000000000515BI0100001169 | 129.86 | SqM |
| 40 | 40 | Supplying and laying true to line and level Double Charge Vitrified Tiles of approved brandconforming to IS 15622: 2006 (Group B I a) and tested as per IS 13630:2006 (relevant parts) [Non-modular sizes for tiles with Water Absorption (av.) = 0.08 %] in floor, skirting etc. set in 20 mm thick sand cement mortar (1:4) bed prepared after application of slurry using 1.75Kg of cement per Sqm over the base and 2mm thick cement slurry using cement @2.91Kg./sqm at the back side of the tiles and laid over the mortar bed using 0.2 kg/sqm of White cement used for joint filling with approved pigment as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, Iabour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (Note: This work should not be executed without specific permission of Superintending Engineer)\n(a) ln Ground FIoor:(size not Iess than 600mmX 600 mm X 9.5mm thick)\n | BI01010001010000000000000515BI0100001170 | 47.41 | SqM |
| 41 | 41 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing\nwork. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]\nGROUND FLOOR \n | BI01010001010000000000000515BI0100001171 | 47.41 | SqM |
| 42 | 42 | Extra cost of labour for grinding Kota Stone Floor in treads and riser of Steps. | BI01010001010000000000000515BI0100001172 | 136.93 | SqM |
| 43 | 43 | Supplying and laying true to line and level 20 mm / 25 mm. thick precast roof tiles made of cement conc. with stone chips as per approved strength and density set in 25mm avg. thick cement morter(1:3) and filling up joint (3 mm wide) with cement sand mortar (1:1) applying cement slurry @ 1.75 kg per Sq.m back of tiles and then settting close the precast tiles, finishing up the joints with slurry already laid and finally finishing the top surface including providing 150 mm. high skirting with the same tiles flushed with the inside surface of parapet wall,finishing the mouth of rain water pipes, curving etc. as necessary complete as per direction of the Engineer-in-charge. (Levelling if necessary may be paid separately)\n(b) For 25 mm. thick precast tiles (cement 14.6 kg/ Sq.m for underlayer)\n | BI01010001010000000000000515BI0100001173 | 0.37 | Cum |
| 44 | 44 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).\nSal : Malayasian\n | BI01010001010000000000000515BI0100001174 | 12 | SqM |
| 45 | 45 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.\nIn ground floor.\n(In case of non-supply of single plank, penal rate of\nreduction of 20% will be made)\n40mm thick shutters with 19mm thick panel of size 30 to 45 cm\n(a) Ordinary Teak Wood\n\n | BI01010001010000000000000515BI0100001175 | 7.56 | SqM |
| 46 | 46 | Supplying solid flush type doors of deluxe decorative (both side) quality, conforming to I:S 2202 timber frame consisting of top and bottom rail and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 27.5mm wide battens places both ways in order to made the door of solid core and internal lipping with teak, mahogony or rose wood approved decorative veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing the shutters in position but excluding the cost of hinges and other fittings in\nground floor:\n(a) 35mm thick shutters (single leaf)\n | BI01010001010000000000000515BI0100001176 | 1.89 | SqM |
| 47 | 47 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001177 | 34.65 | SqM |
| 48 | 48 | Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer’s specification and direction of Engineer-in-Charge.\n | BI01010001010000000000000515BI0100001178 | 11.025 | Sq.M |
| 49 | 49 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-inCharg\nIn Ground floor\n | BI01010001010000000000000515BI0100001179 | 340.18 | Kg |
| 50 | 50 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with\nfixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film\nGround Floor & 1st Floor\n\n | BI01010001010000000000000515BI0100001180 | 4 | Qtl |
| 51 | 51 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows,railing etcc. fitted and fixed with necessary screws and lugs in Ground Floor\n(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. \nGround Floor \n | BI01010001010000000000000515BI0100001181 | 0.37 | Qtl |
| 52 | 52 | DO-DO-DO\n1ST FLOOR | BI01010001010000000000000515BI0100001182 | 25 | SqM |
| 53 | 53 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.\n4mm thick coloured / tinted / smoke glass.\n\n | BI01010001010000000000000515BI0100001183 | 41.03 | SqM |
| 54 | 54 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc\nPWD SOR Vol-I w. e. f. 1.11.2017, Page 200, Item No. 1(b) | BI01010001010000000000000515BI0100001184 | 43.74 | SqM |
| 55 | 55 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.\n | BI01010001010000000000000515BI0100001185 | 43.74 | SqM |
| 56 | 56 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary \nOn steel or other metal surface : \nWith super gloss (hi-gloss) \nTwo coats (with any shade except white)\n | BI01010001010000000000000515BI0100001186 | 41.03 | SqM |
| 57 | 57 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\n(a) On timber or plastered surface :\nWith super gloss (hi-gloss) -\nTwo coats (with any shade except white)\n | BI01010001010000000000000515BI0100001187 | 6 | SqM |
| 58 | 58 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.\n | BI01010001010000000000000515BI0100001188 | 72 | Each |
| 59 | 59 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) \n40mm X 6mm, 250mm Length\n | BI01010001010000000000000515BI0100001189 | 72 | Each |
| 60 | 60 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. 100mm. X 58mm. X 1.90mm\n | BI01010001010000000000000515BI0100001190 | 68 | Each |
| 61 | 61 | Iron socket bolt of approved quality fitted and fixed complete\n150mm long x 10mm dia bolt. \n | BI01010001010000000000000515BI0100001191 | 4 | Each |
| 62 | 62 | Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete.\n\n | BI01010001010000000000000515BI0100001192 | 20 | Each |
| 63 | 63 | Iron skeleton bolt of approved quality fitted and fixed complete.\n(a) 375mm long x 10mm dia rod.\n | BI01010001010000000000000515BI0100001193 | 6 | Each |
| 64 | 64 | Door stopper (Anodised aluminium\n | BI01010001010000000000000515BI0100001194 | 6 | Each |
| 65 | 65 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.\n(b) 250 mm long\n | BI01010001010000000000000515BI0100001195 | 6 | Each |
| 66 | 66 | Godrej Hydraulic door closer fitted and fixed complete.\n(a) Heavy type\n | BI01010001010000000000000515BI0100001196 | 15 | Each |
| 67 | 67 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:\n(a) With continuous plate base (Hexagonal/ Round rod)\n150 mm grip x 12 mm dia rod\n | BI01010001010000000000000515BI0100001197 | 6 | Mtr |
| 68 | 68 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx)\n\n | BI01010001010000000000000515BI0100001198 | 6 | Mtr |
| 69 | 69 | Water Supply Arrangement Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore e) For depth upto 150 metre for 80 mm dia. tube well wuth top enlargement of 150 mm dia (i) 80 mm dia. boring etc.\n\n | BI01010001010000000000000515BI0100001199 | 80 | Mtr |
| 70 | 70 | (ii) 150 mm dia. boring etc. top enlargement | BI01010001010000000000000515BI0100001200 | 35 | Mtr |
| 71 | 71 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).( A) PVC Pipes 80mm | BI01010001010000000000000515BI0100001201 | 100 | Mtr |
| 72 | 72 | DO-DO-DO 150 mm\n\n | BI01010001010000000000000515BI0100001202 | 12 | Mtr |
| 73 | 73 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming\nto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239\n(Part - I).\nReducing Socket (mmXmm)150 X 80 | BI01010001010000000000000515BI0100001203 | 1 | Each |
| 74 | 74 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming\nto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239\n(Part - I).\nSocket 80mm | BI01010001010000000000000515BI0100001204 | 8 | Each |
| 75 | 75 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with\nsocket (iii) 75 mm dia\n\n | BI01010001010000000000000515BI0100001205 | 1 | Each |
| 76 | 76 | Labour for making arrangement for showing verticality test including the\ncost for hire charges of tools and plants, scafolding, labour etc. all\ncomplete. | BI01010001010000000000000515BI0100001206 | 1 | Each |
| 77 | 77 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.. | BI01010001010000000000000515BI0100001207 | 1.2 | cum |
| 78 | 78 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required\n\n | BI01010001010000000000000515BI0100001208 | 2 | Day |
| 79 | 79 | Supplying, fitting and fixing 300 mm M.S.housing clamp ofapproved\nquality. | BI01010001010000000000000515BI0100001209 | 1 | Per set |
| 80 | 80 | Supplying PVC strainer of approved make with adapter conforming to I.S.12818 specifications (iii) 80 mm dia. | BI01010001010000000000000515BI0100001210 | 6 | mtr |
| 81 | 81 | Sanitary & Plumbing Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in\nany position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (25 mm) | BI01010001010000000000000515BI0100001211 | 80 | mtr |
| 82 | 82 | Do-Do-Do 20 mm dia. \n\n | BI01010001010000000000000515BI0100001212 | 60 | mtr |
| 83 | 83 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).25 mm dia | BI01010001010000000000000515BI0100001213 | 8 | Each |
| 84 | 84 | Do-Do-Do 20 mm dia. | BI01010001010000000000000515BI0100001214 | 4 | Each |
| 85 | 85 | Supplying, fitting and fixing PVC pipes of approved make of (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect\nincluding cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) .For Exposed Work PVC Pipes (Dia) 100 MM\n\n | BI01010001010000000000000515BI0100001215 | 50 | mtr |
| 86 | 86 | DO DO DO 80 mm. | BI01010001010000000000000515BI0100001216 | 30 | mtr |
| 87 | 87 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.With 'P' trap | BI01010001010000000000000515BI0100001217 | 3 | Each |
| 88 | 88 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). 580 mm X 440 mm\n\n | BI01010001010000000000000515BI0100001218 | 1 | Each |
| 89 | 89 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.E.W.C.Plastic (hallow type) white. | BI01010001010000000000000515BI0100001219 | 3 | Each |
| 90 | 90 | Supplying, fitting and fixing urinal flush pipe fittings of approved brand.C.P. urinal flush pipe fittings range of two 32 mm dia | BI01010001010000000000000515BI0100001220 | 4 | Each |
| 91 | 91 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished\n\n | BI01010001010000000000000515BI0100001221 | 4 | Sqm |
| 92 | 92 | Supplying, fitting and fixing liquid soap container.Cromium plated | BI01010001010000000000000515BI0100001222 | 10 | Each |
| 93 | 93 | Supplying, fitting and fixing towel rail with two brackets.C.P. over brass.25 mm dia. and 750 mm long \n\n | BI01010001010000000000000515BI0100001223 | 6 | Each |
| 94 | 94 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75mm X 75 mm X 75 mm wooden blocks complete.590 mm X 390 mm X 380 mm | BI01010001010000000000000515BI0100001224 | 4 | Each |
| 95 | 95 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm | BI01010001010000000000000515BI0100001225 | 1 | Each |
| 96 | 96 | Supplying, fitting and fixing Half round channel with or without outlet as required set in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).600 mm X 150 mm.White vitreous chinaware.\n\n | BI01010001010000000000000515BI0100001226 | 2 | Mtr |
| 97 | 97 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc..White | BI01010001010000000000000515BI0100001227 | 4 | Each |
| 98 | 98 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. 2000 litre capacity | BI01010001010000000000000515BI0100001228 | 1 | Each |
| 99 | 99 | Labour for hoisting plastic water storage tank.Above 1500 litre up to 5000 liter capacity.Upto 1st story from G.L.\n\n | BI01010001010000000000000515BI0100001229 | 4 | Nos |
| 100 | 100 | Labour for punching hole in plastic water storage tank upto 50 mm . | BI01010001010000000000000515BI0100001230 | 6 | Nos |
| 101 | 101 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.550 mm X 400 mm size. | BI01010001010000000000000515BI0100001231 | 4 | Each |
| 102 | 102 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.750 mm long\n\n | BI01010001010000000000000515BI0100001232 | 12 | Each |
| 103 | 103 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.750 mm long | BI01010001010000000000000515BI0100001233 | 12 | Each |
| 104 | 104 | Supplying, fitting and fixing C.P. Extension Pipe\n\n | BI01010001010000000000000515BI0100001234 | 30 | Each |
| 105 | 105 | Supplying, fitting and fixing C.P. Wall Flange | BI01010001010000000000000515BI0100001235 | 30 | Each |
| 106 | 106 | Supplying, fitting and fixing shower of approved brand and mak Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall\nHook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or\nsimilar).\n\n | BI01010001010000000000000515BI0100001236 | 4 | Each |
| 107 | 107 | Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar\nbrand). | BI01010001010000000000000515BI0100001237 | 10 | Each |
| 108 | 108 | Supplying, fitting and fixing Chromium plated Concealed Stop Cock (Equivalent to Code No. 514(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001238 | 8 | Each |
| 109 | 109 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.With Pakur variety.\n\n | BI01010001010000000000000515BI0100001239 | 2 | Each |
| 110 | 110 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia (SAIL/TATA/RINL) | BI01010001010000000000000515BI0100001240 | 1 | Each |
| 111 | 111 | Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately)'P' Trap 100 mm | BI01010001010000000000000515BI0100001241 | 4 | Each |
| 112 | 112 | DO-DO-DO 'S' Trap 100 mm\n\n | BI01010001010000000000000515BI0100001242 | 4 | Each |
| 113 | 113 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will be paid seperately).100 mm dia | BI01010001010000000000000515BI0100001243 | 6 | Each |
| 114 | 114 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm\n\n | BI01010001010000000000000515BI0100001244 | 6 | Each |
| 115 | 115 | Add GST, as applicable @ 12% | BI01010001010000000000000515BI0100001245 | 1 | L.S. |
| 116 | 116 | Add Labour welfare cess @ 1% | BI01010001010000000000000515BI0100001246 | 1 | L.S. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
