Furnishing Of School Of Planning And Architecture Building At University Of Mysore, Manasagangotri, Mysuru On Turnkey Basis

Tender Notice

25763379
Furnishing Of School Of Planning And Architecture Building At University Of Mysore, Manasagangotri, Mysuru On Turnkey Basis
Indian
Karnataka
19-10-2020
27-10-2020
29-10-2020

Tender Details

Furnishing Of School Of Planning And Architecture Building At University Of Mysore, Manasagangotri, Mysuru On Turnkey Basis 1. Supplying Of Recess Mounting, 2. Providing And Applying Enamel Metal Paint, 3. Supplying And Fixing Surface/Flush: 6 Way, 4. Led Par Light, 5. Providing And Fixing To Wall, Ceiling And Floor, 6. Fabricating, Supplying & Erecting, 7. Supply, Installation Ofrefrigerant Pipe, 8. Supply And Installation Of Acoustic Insulation, 9. Supply And Installation Of Powder Coated Aluminum Diffusers, 10. Supplying 100Amps Rated 3Phase With Neutral Bus Bar, 11. Supply Of Round/Square Recess/Surface Mounted Rolling, 12. Earthwork Excavation, 13. Acp Cut Letter Board, 14. Supplying And Wiring Adopting Loop System - Medium Point Above 3Mtr Upto 6Mtr From Tapping Point To Outlet Via Switch Box, 15. Mineral Fiber False Ceiling, 16. Supplying Heavy Gauge Pvc Conduit - 25Mm Dia 2Mm Thick, 17. Supplying And Running Gi/Copper Conductor, 18. Supplying And Fixing Superior Quality Modular Switch - 1 To 3 Module, 19. Supplying Heavy Gauge Pvc Conduit - 40Mm Dia 2.5Mm Thick, 20. Supplying And Fixing Superior Quality Modular Switch - 4 Moudule, 21. Generator Shed, 22. Providing & Supplying Two Side Ladder, 23. Providing Chain Link Fencing, 24. Supply Of Led Floodlight, 25. Supplying And Fixing Of Modular Switch - 32Amps Dp Switch, 26. Supplying And Fixing Of Flood Lights With Light Shell, 27. Pest Control Treatment, 28. Providing And Fixing The Veneer Paneling On Framework, 29. Electrical Inspector, 30. Ug Cable:, 31. Providing, Fabricating And Fixing Partition Frame Work, 32. Supplying And Fixing Surface/Flush: 4-5 Way, 33. Supplying And Fixing Miniature Circuit - 40 Amps Tpn, 34. Providing & Fixing Nylon White Threaded Mesh, 35. Supplying Heavy Gauge Pvc Conduit - 19/20Mm Dia 2Mm Thick, 36. Wiring For Lighting/Power Circuit - 2.5 Sqmm, 37. Supply And Fixing Of Powder Coated Extruded Aluminum Grill, 38. Wiring For Lighting/Power Circuit: 6.0 Sqmm, 39. Providing And Fixing The Curtains Materials, 40. Supply And Installation Of Tarpaulin Canvas, 41. Higher Reach Wall Panelling, 42. Supplying And Fixing Superior Quality Modular Switch -6 Moudule, 43. Providing And Placing On Terrace, 44. Door Closer, 45. Supply, Fabrication And Installation Of Gi Ducting, 46. Stage Screen, 47. Executive Chairs, 48. Dias Table, 49. Supplying And Fixing Of Modular Switch -6Amps One Way Switch, 50. 10 Kva Online Ups, 51. Visitors Chairs, 52. Supplying Heavy Gauge Pvc Conduit - 32Mm Dia 2.5Mm Thick, 53. Supplying And Fixing Surface/Flush: 1-3 Way, 54. Offline Software, 55. Dg Bed, 56. Supplying And Fixing Surface/Flush: 10-12 Way, 57. Supplying Of Multi Function Digital Meter, 58. End Termination, 59. Supplying And Wiring Adopting Loop System - Long Point Above 6Mtr Upto 10Mtr From Tapping Point To Out Let Via Switch Box, 60. Dg Amf Panel, 61. Supplying, Fixing And Wiring Earth Leakage, 62. Scaffolding Charges, 63. Supplying And Fixing Superior Quality Modular Switch - 8 Moudule, 64. Supplying Fixing And Wiring Earth Electrode, 65. Name Board, 66. Supplying & Filling Refrigerant, 67. Supplying And Fixing Surface/Flush: 8 Way, 68. 'L' Shape Profile, 69. Plpb Podium, 70. Providing And Fixing Factory Made Single Leaf, 71. Providing And Applying Painting In Two Coats, 72. Flooring Mat, 73. Expansion Joint Work, 74. Providing And Laying Of Modular Wooden Polished Flooring, 75. Supplying And Fixing Of Metal Socket Set, 76. Supplying And Running Of Gi/Copper Strips, 77. Fountain Repair Work, 78. Supplying And Fixing Of Modular Switch - 6Amps 3Way Socket., 79. Auditorium Chair, 80. Providing & Fixing 10Mm Foam, 81. Supplying And Fixing Of Led, 82. Providing And Fixing Wooden Frame, 83. Supplying Of On Load Change Over Switches, 84. Providing And Laying In Position Plain Cement, 85. Lower Reach Wall Panelling, 86. Providing Cement Mortar Of Mix, 87. Providing And Fixing Upholstered Sofa Set, 88. Earthing, 89. Supplying And Wiring Adopting Loop System - Short Point Upto 3Mtr From Tapping Point To Out Let Via Switch Box, 90. Supplying, Installing, Testing And Commissioning Of Diesel Generatorset, 91. Screen, 92. Supplying, Erecting, Testing, Commissioning Package, 93. Supplying And Fixing Miniature Circuit - 6-32 Amps Dp, 94. Providing And Fixing In Position Gypsum Board False Ceiling, 95. Supplying And Fixing Of Modular Switch - 6/16Amps Universal Socket, 96. Fabricating Supplying And Mounting Ms Box, 97. Providing And Laying In Position Yelahanka Tiles, 98. Public Address System, 99. Supplying And Fixing Superior Quality Modular Switch - 12 Moudule, 100. Providing And Laying In Position Plain Cement Concrete, 101. Providing & Fixing Signage, 102. Supply And Installation Of Thermal Insulation, 103. Wiring For Lighting/Power Circuit: 4 Sqmm, 104. Wiring For Lighting/Power Circuit: A: 1.5 Sqmm, 105. Supplying And Fixing Molded Case Circuit, 106. Hitachi Lcd Projector, 107. Veneer Ceiling Film, 108. Supplying Wall Mounting Fan,

Key Value

Document Fees
INR 550 /-
EMD
INR 748500.00 /-
Tender Value
Refer document

BOQ Items

Sl No Item Code Item Name Item Description Unit Quantity
1
SPA/CPDPS/ELE-57 SUPPLYING OF RECESS MOUNTING SPECIFICATION: SUPPLYING OF RECESS MOUNTING : Supplying of recess mounting non integral type ........LED ...... W luminaire comprising of pressure decast/extruded aluminum housing, with spring loaded fase ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, , THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/ CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. LED modular down light 2\x2\ / 1\ x 4\ 42-55 watts
No
24
2
SPA/CPDPS-86 PROVIDING AND APPLYING ENAMEL METAL PAINT SPECIFICATION: PROVIDING AND APPLYING ENAMEL METAL PAINT: Providing and applying enamel metal paint two coats ( excluding priming coat ) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
Sqm
580
3
SPA/CPDPS/ELE-31-C SUPPLYING AND FIXING SURFACE/FLUSH: 6 Way SPECIFICATION: SUPPLYING AND FIXING SURFACE/FLUSH: 6 Way Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., Complete.
Each
4
4
SPA/CPDPS/ELE-59 LED PAR LIGHT SPECIFICATION: LED PAR LIGHT: LED Par light, PC Lights bar lights48 Channel wall mount Mixer, 48 channel mixer pack, horizontal lighting bar etc.,
Lot
1
5
SPA/CPDPS-79 PROVIDING AND FIXING TO WALL, CEILING AND FLOOR SPECIFICATION: PROVIDING AND FIXING TO WALL, CEILING AND FLOOR: Providing and fixing to wall, ceiling and floor, low density polyethylene pipes 6.00 kgf/sq.cm working pressure 63mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications.
Nos
20
6
SPA/CPDPS/FUR-10 FABRICATING, SUPPLYING & ERECTING SPECIFICATION: FABRICATING, SUPPLYING & ERECTING: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Kgs
500
7
SPA/CPDPS/ELE-48 SUPPLY, INSTALLATION OFREFRIGERANT PIPE SPECIFICATION: SUPPLY, INSTALLATION OFREFRIGERANT PIPE: Supply, installation of 5/8" and 7/8" Hard drawn refrigerant pipe and insulation suitable for 11TR duct able split Air- Conditioner.
Mtr
35
8
SPA/CPDPS/ELE-52 SUPPLY AND INSTALLATION OF ACOUSTIC INSULATION SPECIFICATION: SUPPLY AND INSTALLATION OF ACOUSTIC INSULATION: Supply and installation of Acoustic insulation using 50mm thick with 24Kg Density glass wool with 24G aluminum perforated sheet complete.
Sqmt
160
9
SPA/CPDPS/ELE-53 SUPPLY AND INSTALLATION OF POWDER COATED ALUMINUM DIFFUSERS SPECIFICATION: SUPPLY AND INSTALLATION OF POWDER COATED ALUMINUM DIFFUSERS: Supply and installation of Powder coated aluminum diffusers of size 595x595mm for supply & return air.
Nos
30
10
SPA/CPDPS/ELE-40 Supplying 100Amps rated 3phase with neutral bus bar SPECIFICATION: Supplying 100Amps amps rated 3phase with neutral bus bar Supplying 100Amps amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable colored PVC sleeve, mounted on phenol/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100Amps 4x30x6mm Aluminum Strips
Mtr
1
11
SPA/CPDPS/ELE-56 SUPPLY OF ROUND/SQUARE RECESS/SURFACE MOUNTED ROLLING SPECIFICATION: SUPPLY OF ROUND/SQUARE RECESS/SURFACE MOUNTED ROLLING Supply of round/square recess/surface mounted rolling type LED Down light with .......W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector & has swiveling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 15-18W
Each
24
12
SPA/CPDPS-81 EARTHWORK EXCAVATION SPECIFICATION: EARTHWORK EXCAVATION: Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications.
Cum
4.5
13
SPA/CPDPS/FUR-27 ACP CUT LETTER BOARD SPECIFICATION: ACP CUT LETTER BOARD: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
2
14
SPA/CPDPS/ELE-29-B SUPPLYING AND WIRING ADOPTING LOOP SYSTEM - Medium point above 3Mtr upto 6Mtr from tapping point to outlet via switch box SPECIFICATION: SUPPLYING AND WIRING ADOPTING LOOP SYSTEM : Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. - MEDIUM POINT ABOVE 3MTR UPTO 6MTR FROM TAPPING POINT TO OUTLET VIA SWITCH BOX DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Point
26
15
SPA/CPDPS/FUR-1 MINERAL FIBER FALSE CEILING SPECIFICATION: MINERAL FIBER FALSE CEILING: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
2280
16
SPA/CPDPS/ELE-28-B SUPPLYING HEAVY GAUGE PVC CONDUIT - 25mm dia 2mm thick SPECIFICATION: SUPPLYING HEAVY GAUGE PVC CONDUIT- 25mm dia 2mm thick DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Mtr
150
17
SPA/CPDPS/ELE-45 SUPPLYING AND RUNNING GI/COPPER CONDUCTOR SPECIFICATION: SUPPLYING AND RUNNING GI/COPPER CONDUCTOR: Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG Copper wire.
Mtr
45
18
SPA/CPDPS/ELE-32-A SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 1 to 3 Module SPECIFICATION: SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 1 to 3 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
Each
6
19
SPA/CPDPS/ELE-28-D SUPPLYING HEAVY GAUGE PVC CONDUIT - 40mm dia 2.5mm thick SPECIFICATION: SUPPLYING HEAVY GAUGE PVC CONDUIT - 40mm dia 2.5mm thick
Mtr
30
20
SPA/CPDPS/ELE-32-B SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 4 MOUDULE SPECIFICATION: SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 4 MOUDULE Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
Each
4
21
SPA/CPDPS-72 GENERATOR SHED SPECIFICATION: GENERATOR SHED: Provision for Generator shed
No
1
22
SPA/CPDPS/FUR-23 PROVIDING & SUPPLYING TWO SIDE LADDER SPECIFICATION: PROVIDING & SUPPLYING TWO SIDE LADDER: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
1
23
SPA/CPDPS-85 PROVIDING CHAIN LINK FENCING SPECIFICATION: PROVIDING CHAIN LINK FENCING: Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts and as per the directions of the Engineer-in-charge of work including two coats of approved quantity paint over one coat of shop paint.
Sqm
580
24
SPA/CPDPS/ELE-58 SUPPLY OF LED FLOODLIGHT SPECIFICATION: SUPPLY OF LED FLOODLIGHT: Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W LED loodlight 180W 12.9.5 System Power consumption. LED fficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have inhouse facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.
Each
4
25
SPA/CPDPS/ELE-33-c SUPPLYING AND FIXING OF MODULAR SWITCH - 32Amps DP switch SPECIFICATION: SUPPLYING AND FIXING OF MODULAR SWITCH - 32Amps DP switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Each
6
26
SPA/CPDPS-77 SUPPLYING AND FIXING OF FLOOD LIGHTS WITH LIGHT SHELL SPECIFICATION: SUPPLYING AND FIXING OF FLOOD LIGHTS WITH LIGHT SHELL: Supplying and fixing of flood lights with Light shell: Die-casting aluminium body with high strength, compact structure and smooth profile, Finish: Antistatic polyster coating, to be anti-corrosion,Reflector: High purity anodized aluminium. Symmetrical or asymmetrical light distribution. Diffuser: High transparent tempered glass in 4mm/5mm thickness, heat proof. ,High temperature resistant silicon rubber sealing ring, to be dust proof and water proof,Stainless steel screws. Steel gear plate with antistatic polyster coating. Top-lift cover, easy repair and maintenance. Easy access to lamp and gear. Lamp and gear are installed in separate rooms to resist heat influence. Fit for 250W and 400W metal halide or high pressure sodium lamps, providing a wide range in application.Application: Stations, dock, square and construction site lighting, particularly for stereotypic illumination for high buildings. Also have another version without gear control box, and is fit for LED lamps, energy saving lamps, blended mercury lamps.to hostel including labour,material complete as per specifications.
Nos
4
27
SPA/CPDPS/FUR-15 PEST CONTROL TREATMENT SPECIFICATION: PEST CONTROL TREATMENT: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
4500
28
SPA/CPDPS/FUR-3 PROVIDING AND FIXING THE VENEER PANELING ON FRAMEWORK SPECIFICATION: PROVIDING AND FIXING THE VENEER PANELING ON FRAMEWORK: Detailed technical specification is uploaded separately.
Sqft
1480
29
SPA/CPDPS-70 ELECTRICAL INSPECTOR SPECIFICATION: ELECTRICAL INSPECTOR: DG approval Electrical Inspector
LS
1
30
SPA/CPDPS-68 UG CABLE: SPECIFICATION: UG Cable 120Sqm Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.
Mtr
150
31
SPA/CPDPS/FUR-9 PROVIDING, FABRICATING AND FIXING PARTITION FRAME WORK SPECIFICATION: PROVIDING, FABRICATING AND FIXING PARTITION FRAME WORK: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
72
32
SPA/CPDPS/ELE-31-B SUPPLYING AND FIXING SURFACE/FLUSH: 4-5 Way SPECIFICATION: SUPPLYING AND FIXING SURFACE/FLUSH: 4-5 Way Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., Complete.
Each
4
33
SPA/CPDPS/ELE-34-B SUPPLYING AND FIXING MINIATURE CIRCUIT - 40 Amps TPN SPECIFICATION: SUPPLYING AND FIXING MINIATURE CIRCUIT - 40 Amps TPN Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and \C\ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
Each
2
34
SPA/CPDPS-73 PROVIDING & FIXING NYLON WHITE THREADED MESH SPECIFICATION: PROVIDING & FIXING NYLON WHITE THREADED MESH: Providing & fixing Nylon white threaded mesh 80mm size of 18/3 guage with top & bottom threads of 6mm size & tight fixing to the column or other supporting with locking hooks including cost of all materials, labour, lead and lifts
Sqm
1980
35
SPA/CPDPS/ELE-28-A SUPPLYING HEAVY GAUGE PVC CONDUIT - 19/20mm dia 2mm thick SPECIFICATION: SUPPLYING HEAVY GAUGE PVC CONDUIT - 19/20mm dia 2mm thick DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Mtr
60
36
SPA/CPDPS/ELE-30-B WIRING FOR LIGHTING/POWER CIRCUIT - 2.5 Sqmm SPECIFICATION: WIRING FOR LIGHTING/POWER CIRCUIT - 2.5 Sqmm Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistoried copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.
Mtr
1200
37
SPA/CPDPS/ELE-54 SUPPLY AND FIXING OF POWDER COATED EXTRUDED ALUMINUM GRILL SPECIFICATION: SUPPLY AND FIXING OF POWDER COATED EXTRUDED ALUMINUM GRILL Supply and fixing of powder coated extruded aluminum grill suitable for supply/return air including all fixing hardware etc.,. Complete. 6\\ extruded aluminum grill with 15 deg to 30 deg louvers
Mtr
30
38
SPA/CPDPS/ELE-30-D WIRING FOR LIGHTING/POWER CIRCUIT: 6.0 Sqmm SPECIFICATION: WIRING FOR LIGHTING/POWER CIRCUIT: 6.0 Sqmm Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistoried copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.
Mtr
300
39
SPA/CPDPS/FUR-5 PROVIDING AND FIXING THE CURTAINS MATERIALS SPECIFICATION: PROVIDING AND FIXING THE CURTAINS MATERIALS: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
563.6
40
SPA/CPDPS/ELE-51 SUPPLY AND INSTALLATION OF TARPAULIN CANVAS SPECIFICATION: SUPPLY AND INSTALLATION OF TARPAULIN CANVAS: Supply and installation of Tarpaulin canvas between the AC duct and AC evaporator unit including accessories.
Nos.
30
41
SPA/CPDPS/FUR-6 HIGHER REACH WALL PANELLING SPECIFICATION: HIGHER REACH WALL PANELLING: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
2970
42
SPA/CPDPS/ELE-32-C SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH -6 MOUDULE SPECIFICATION: SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH -6 MOUDULE Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
Each
4
43
SPA/CPDPS-80 PROVIDING AND PLACING ON TERRACE SPECIFICATION: PROVIDING AND PLACING ON TERRACE: Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications. (For 1000 litre capacity)
Nos
2
44
SPA/CPDPS/FUR-22 DOOR CLOSER SPECIFICATION: DOOR CLOSER: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
3
45
SPA/CPDPS/ELE-49 SUPPLY, FABRICATION AND INSTALLATION OF GI DUCTING SPECIFICATION: SUPPLY, FABRICATION AND INSTALLATION OF GI DUCTING: Supply, fabrication and installation of GI Ducting Along with flanges, supports & all fixing materials. 22Gauge
Sqmt
160
46
SPA/CPDPS/FUR-20 STAGE SCREEN SPECIFICATION: STAGE SCREEN: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
1276
47
SPA/CPDPS/FUR-16 EXECUTIVE CHAIRS SPECIFICATION: EXECUTIVE CHAIRS: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
10
48
SPA/CPDPS/FUR-17 DIAS TABLE SPECIFICATION: DIAS TABLE: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
4
49
SPA/CPDPS/ELE-33-a SUPPLYING AND FIXING OF MODULAR SWITCH -6Amps one way Switch SPECIFICATION: SUPPLYING AND FIXING OF MODULAR SWITCH - 6Amps one way Switch Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Each
60
50
SPA/CPDPS-64 10 KVA ONLINE UPS SPECIFICATION: 10 KVA ONLINE UPS: 10 KVA ONLINE UPS WITH 110AH Tall Tubular Battery 15 Nos, with Stand and UPS Point with Electrical Items and Installation: IGBT Based for Hi end Applications, which require High Starting Current. : Output waveform/Output: Power Factor Pure Sine wave/0.8, Battery 15 Battery System - 180V DC, Output Voltage / Frequency - 220V (+-10% ) 50 Hz (+-1), Input Voltage Range 180V - 265V, Efficiency (Battery Mode ) > 80%, Maximum Charging Current 16amps, Charger Control Advanced Battery Management, Protections : Low Battery Voltage, Battery Overload, Over Temperature, Short Circuit, Environmental Parameters : Operating Temperature )-45c , Integrated Cooling Fan & Heat Sink, Dimensions (L x W x H) in MM 880 x 585 x 810, Gross Weight 140 Kgs, Battery Terminals wire, 2 Poll 36 / 40 Amp MCB For input and Output - UPS, 8Sqm MM and 1SqmMM copper wire with Fix Pipe with Accessories: UPS Input and Output, UPS Housing IP 65 Metal UPS and battery housing with ILAM and MCB .
Nos
3
51
SPA/CPDPS/FUR-19 VISITORS CHAIRS SPECIFICATION: VISITORS CHAIRS: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Set
5
52
SPA/CPDPS/ELE-28-C SUPPLYING HEAVY GAUGE PVC CONDUIT - 32mm dia 2.5mm thick SPECIFICATION: SUPPLYING HEAVY GAUGE PVC CONDUIT - 32mm dia 2.5mm thick DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Mtr
40
53
SPA/CPDPS/ELE-31-A SUPPLYING AND FIXING SURFACE/FLUSH: 1-3 Way SPECIFICATION: SUPPLYING AND FIXING SURFACE/FLUSH: 1-3 Way Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., Complete.
Each
6
54
SPA/CPDPS-61 OFFLINE SOFTWARE SPECIFICATION: OFFLINE SOFTWARE: Specification : Admin, Login, Manage Members, Manage reeipts, Reports on transactions and payment status, change password, Logout, User Login, Manage member, create receipts with print, Daily transaction report, Change password and Logout.
No
1
55
SPA/CPDPS-71 DG bed SPECIFICATION: DG bed: Construction for DG bed
Unit
1
56
SPA/CPDPS/ELE-31-E SUPPLYING AND FIXING SURFACE/FLUSH: 10-12 Way SPECIFICATION: SUPPLYING AND FIXING SURFACE/FLUSH: 10-12 Way Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., Complete.
Each
8
57
SPA/CPDPS/ELE-38 SUPPLYING OF MULTI FUNCTION DIGITAL METER SPECIFICATION: SUPPLYING OF MULTI FUNCTION DIGITAL METER: Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.
Each
1
58
SPA/CPDPS-69 END TERMINATION SPECIFICATION: END TERMINATION: End Termination The cable termination kit shall be suitable for terminating the cable on indoor or outdoor installation as per requirement. The type of cable will be armored PVC / XLPE insulated H.T/L.T. Cable. The Straight - through joints shall be suitable for Buried / Over Head application
Unit
4
59
SPA/CPDPS/ELE-29-C SUPPLYING AND WIRING ADOPTING LOOP SYSTEM - Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box SPECIFICATION: SUPPLYING AND WIRING ADOPTING LOOP SYSTEM: Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet.- LONG POINT ABOVE 6MTR UPTO 10MTR FROM TAPPING POINT TO OUT LET VIA SWITCH BOX DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Point
20
60
SPA/CPDPS-66 DG AMF PANEL SPECIFICATION: DG AMF PANEL: DG Amf Panel The AMF Panel shall have IP-52 degree of Protection as per IS:12063. 2. The D.G. sets shall be provided with automatic start facility to make it possible to take full load within 30 seconds of Power Supply failure. ... Testing facility for automatic operation of DG Set shall be provided in AMF panel.
Unit
1
61
SPA/CPDPS/ELE-35 SUPPLYING, FIXING AND WIRING EARTH LEAKAGE SPECIFICATION: SUPPLYING, FIXING AND WIRING EARTH LEAKAGE: Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 63 Amps 4 pole
Each
1
62
SPA/CPDPS/FUR-25 SCAFFOLDING CHARGES SPECIFICATION: SCAFFOLDING CHARGES: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Job
1
63
SPA/CPDPS/ELE-32-D SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 8 MOUDULE SPECIFICATION: SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 8 MOUDULE Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
Each
4
64
SPA/CPDPS/ELE-43 SUPPLYING FIXING AND WIRING EARTH ELECTRODE SPECIFICATION: SUPPLYING FIXING AND WIRING EARTH ELECTRODE: Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
Each
3
65
SPA/CPDPS/FUR-26 NAME BOARD SPECIFICATION: NAME BOARD: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
1
66
SPA/CPDPS/ELE-55 SUPPLYING & FILLING REFRIGERANT SPECIFICATION: SUPPLYING & FILLING REFRIGERANT: Supplying & filling refrigerant latest R-410 / R-32 for air conditioning equipment\s. Which includes the labour & Nitrogen gas for pressure and leak testing.
Per Kg.
50
67
SPA/CPDPS/ELE-31-D SUPPLYING AND FIXING SURFACE/FLUSH: 8 Way SPECIFICATION: SUPPLYING AND FIXING SURFACE/FLUSH: 8 Way Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., Complete.
Each
4
68
SPA/CPDPS/FUR-13 \L\ SHAPE PROFILE SPECIFICATION: \L\ SHAPE PROFILE: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Rft
860
69
SPA/CPDPS/FUR-18 PLPB PODIUM SPECIFICATION: PLPB PODIUM: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
2
70
SPA/CPDPS-76 PROVIDING AND FIXING FACTORY MADE SINGLE LEAF SPECIFICATION: PROVIDING AND FIXING FACTORY MADE SINGLE LEAF: Providing and fixing factory made single leaf rigid GRP Sandwich composite door shutter of 40 mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV-stabilized lsopthalic Gelcoat and one layer of 450 gns E-Giass Chopped Strand Mat (CSM), impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 37mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not lessthan 36mmx32mmand also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc. shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the salwood reinforement and the skins. The material and process for manufacturing the door shutters shall confirm to Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain coulur White/IVORY/Beige/Light Grey or any other colour using high quality pigments. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot
Sqm
3.8
71
SPA/CPDPS-88 PROVIDING AND APPLYING PAINTING IN TWO COATS SPECIFICATION: PROVIDING AND APPLYING PAINTING IN TWO COATS: Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.
Sqm
5200
72
SPA/CPDPS/FUR-12 FLOORING MAT SPECIFICATION: FLOORING MAT: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
4500
73
SPA/CPDPS-75 EXPANSION JOINT WORK SPECIFICATION: EXPANSION JOINT WORK: Expansion joint work in terrace cleaning cutting concreting using water proof compound including curing cost of materials, labour complete as per specifications.
Sqm
85
74
SPA/CPDPS/FUR-4 PROVIDING AND LAYING OF MODULAR WOODEN POLISHED FLOORING SPECIFICATION: PROVIDING AND LAYING OF MODULAR WOODEN POLISHED FLOORING: Detailed technical specification is uploaded separately.
Sqft
950
75
SPA/CPDPS/ELE-42 SUPPLYING AND FIXING OF METAL SOCKET SET SPECIFICATION: SUPPLYING AND FIXING OF METAL SOCKET SET: Supplying and fixing of Metal Socket set of 2pole and earth plugs and socket for incorporating SP and TP MCB (Without MCB). The entire plug and socket shall be mounted in a thermoplastic / powder coated metal box & wired Completely. 30Amps
Each
2
76
SPA/CPDPS/ELE-44 SUPPLYING AND RUNNING OF GI/COPPER STRIPS SPECIFICATION: SUPPLYING AND RUNNING OF GI/COPPER STRIPS: Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm Copper plate 6.3.10
Each
3
77
SPA/CPDPS-78 FOUNTAIN REPAIR WORK SPECIFICATION: FOUNTAIN REPAIR WORK: Fountain Repair work With CPVC Plumbing Work including curing cost of materials, labour complete as per specifications.
Nos
1
78
SPA/CPDPS/ELE-33-b SUPPLYING AND FIXING OF MODULAR SWITCH - 6Amps 3way socket. SPECIFICATION: SUPPLYING AND FIXING OF MODULAR SWITCH - 6Amps 3way socket. Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Each
30
79
SPA/CPDPS/FUR-11 AUDITORIUM CHAIR SPECIFICATION: AUDITORIUM CHAIR: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
290
80
SPA/CPDPS/FUR-14 PROVIDING & FIXING 10MM FOAM SPECIFICATION: PROVIDING & FIXING 10MM FOAM: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
4500
81
SPA/CPDPS/ELE-39 SUPPLYING AND FIXING OF LED SPECIFICATION: SUPPLYING AND FIXING OF LED: Supplying and fixing of LED type panel board indicating lamp with required color suitable for 230/440v A.C. 50 Hz 12/24v D.C.
Each
3
82
SPA/CPDPS-87 PROVIDING AND FIXING WOODEN FRAME SPECIFICATION: PROVIDING AND FIXING WOODEN FRAME: Providing and fixing wodden frame and glasss shutters for passage of auditorium including cost of materials, labour, complete as per specifications.
Nos
1
83
SPA/CPDPS/ELE-36 SUPPLYING OF ON LOAD CHANGE OVER SWITCHES SPECIFICATION: SUPPLYING OF ON LOAD CHANGE OVER SWITCHES: Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) 100 Amps
Each
1
84
SPA/CPDPS-82 PROVIDING AND LAYING IN POSITION PLAIN CEMENT SPECIFICATION: PROVIDING AND LAYING IN POSITION PLAIN CEMENT:Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
Cum
6.5
85
SPA/CPDPS/FUR-7 LOWER REACH WALL PANELLING SPECIFICATION: LOWER REACH WALL PANELLING: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
3100
86
SPA/CPDPS-84 PROVIDING CEMENT MORTAR OF MIX SPECIFICATION: PROVIDING CEMENT MORTAR OF MIX Providing cement mortar of mix 1:4 (1 cement :4 sand) including cost of all materials, labour charges, HOM of machinery complete as per specifications.
Sqm
16
87
SPA/CPDPS/FUR-21 PROVIDING AND FIXING UPHOLSTERED SOFA SET SPECIFICATION: PROVIDING AND FIXING UPHOLSTERED SOFA SET: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
4
88
SPA/CPDPS-67 EARTHING SPECIFICATION: EARTHING: The earthing of the tower shall consist of a number of earth stations from each leg of the tower base. Each station consists of bare copper wire of 70mm2 exothermically welded from each base via a copper plate toa solid copper plate 1300mm x 600mm x 5mm via bare copper wire of 70mm2. The copper plates must be driven deep into the earth to make good contact with the virgin soil. All the earth station at each tower base must be linked together with bare copper wire of 70mm2 buried in the virgin soil to a earth station consisting of 2000mm long solid copper earth electrode (rod) having a nominal diameter of not less than 12mm buried vertically in the soil at 750 mm below the earth surface and provided with masonry chambers (300mm x 300mm x 300mm) and with removable concrete slabs.
Unit
4
89
SPA/CPDPS/ELE-29-A SUPPLYING AND WIRING ADOPTING LOOP SYSTEM - SHORT POINT UPTO 3MTR FROM TAPPING POINT TO OUT LET VIA SWITCH BOX SPECIFICATION: SUPPLYING AND WIRING ADOPTING LOOP SYSTEM : Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. Complete for each outlet. SHORT POINT UPTO 3MTR FROM TAPPING POINT TO OUT LET VIA SWITCH BOX
Point
10
90
SPA/CPDPS-65 SUPPLYING, INSTALLING, TESTING AND COMMISSIONING OF DIESEL GENERATORSET SPECIFICATION: SUPPLYING, INSTALLING, TESTING AND COMMISSIONING OF DIESEL GENERATORSET: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Nos
1
91
SPA/CPDPS-63 SCREEN SPECIFICATION: SCREEN: 142" diagonal, 16:10 Motorised surface, Wall or ceiling mounted & includes high-voltage single gang wall switch with cover plate.
No
1
92
SPA/CPDPS/ELE-47 SUPPLYING, ERECTING, TESTING, COMMISSIONING PACKAGE SPECIFICATION: SUPPLYING, ERECTING, TESTING, COMMISSIONING PACKAGE: Supplying, Erecting, Testing, commissioning package type Duct able type split Air-Conditioner with microprocessor control, fitted with twin scroll Compressor with R22/Latest Refrigerant. The unit shall be pre-wired to operate on 415V, 50Hz AC Supply. The unit shall comprise, Evaporated condenser unit, Indoor-Outdoor Motor Fans, suitable over vent fins made up of Aluminum, Copper Refrigent coil, Etc.,. Complete and corded control unit. Capacity : 4TR
No
10
93
SPA/CPDPS/ELE-34-A SUPPLYING AND FIXING MINIATURE CIRCUIT - 6-32 Amps DP SPECIFICATION: SUPPLYING AND FIXING MINIATURE CIRCUIT - 6-32 Amps DP Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and \C\ Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.
Each
8
94
SPA/CPDPS/FUR-2 PROVIDING AND FIXING IN POSITION GYPSUM BOARD FALSE CEILING SPECIFICATION: PROVIDING AND FIXING IN POSITION GYPSUM BOARD FALSE CEILING: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
4000
95
SPA/CPDPS/ELE-33-d SUPPLYING AND FIXING OF MODULAR SWITCH - 6/16Amps universal socket SPECIFICATION: SUPPLYING AND FIXING OF MODULAR SWITCH - 6/16Amps universal socket Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.
Each
6
96
SPA/CPDPS/ELE-41 FABRICATING SUPPLYING AND MOUNTING MS BOX SPECIFICATION: FABRICATING SUPPLYING AND MOUNTING MS BOX: Fabricating supplying and mounting MS box made out 16SWG suitable for floor or wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16SWG
SqCm
25000
97
SPA/CPDPS-74 PROVIDING AND LAYING IN POSITION YELAHANKA TILES SPECIFICATION: PROVIDING AND LAYING IN POSITION YELAHANKA TILES: Providing and laying in position yelahanka tiles of size 250 x 250mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with cement mortar 1:3 mix with red oxide including curing cost of materials, labour complete as per specifications.
Sqm
1100
98
SPA/CPDPS/ELE-60 PUBLIC ADDRESS SYSTEM SPECIFICATION: PUBLIC ADDRESS SYSTEM a) Sp 150c Clamp, b) 12*1 Speaker 400w p audio c)PD -5000 Power amplifer d)Mx -4000 Microphone e)2 core speaker wire f)Sound craft 16 Channel mixer g)Xlr male to female Cable 2mtr h)P38 male I)Xlr male to female Cable 2mtr j)JTS Tk -350 Microphone k)Microphone Stand Big L)P38 to stereo cable m)1.5 sq mm cable n)USB pre Amp Mp3 o)Podium microphone its 5030 p)Spekon pin Male
Lot
1
99
SPA/CPDPS/ELE-32-E SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 12 MOUDULE SPECIFICATION: SUPPLYING AND FIXING SUPERIOR QUALITY MODULAR SWITCH - 12 MOUDULE Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.
Each
8
100
SPA/CPDPS-83 PROVIDING AND LAYING IN POSITION PLAIN CEMENT CONCRETE SPECIFICATION: PROVIDING AND LAYING IN POSITION PLAIN CEMENT CONCRETE: Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregtes @ 0.43cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications.
Cum
8.5
101
SPA/CPDPS/FUR-24 PROVIDING & FIXING SIGNAGE SPECIFICATION: PROVIDING & FIXING SIGNAGE: DETAILED TECHNICAL SPECIFICATION IS UPLOADED.
Nos
1
102
SPA/CPDPS/ELE-50 SUPPLY AND INSTALLATION OF THERMAL INSULATION SPECIFICATION: SUPPLY AND INSTALLATION OF THERMAL INSULATION: Supply and installation of Thermal insulation using 13mm nitrile rubber for return air ducts.
Sqmt
160
103
SPA/CPDPS/ELE-30-C WIRING FOR LIGHTING/POWER CIRCUIT: 4 Sqmm SPECIFICATION: WIRING FOR LIGHTING/POWER CIRCUIT: 4 Sqmm Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistoried copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments.
Mtr
500
104
SPA/CPDPS/ELE-30-A WIRING FOR LIGHTING/POWER CIRCUIT: A: 1.5 Sqmm SPECIFICATION: WIRING FOR LIGHTING/POWER CIRCUIT: Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistoried copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694: confirming to latest amendments. A: 1.5 Sqmm
Mtr
800
105
SPA/CPDPS/ELE-37 SUPPLYING AND FIXING MOLDED CASE CIRCUIT SPECIFICATION: SUPPLYING AND FIXING MOLDED CASE CIRCUIT: Supplying and fixing Molded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. (Icu = Ics) FOUR POLE 100Amps 25kA.
Each
1
106
SPA/CPDPS-62 HITACHI LCD PROJECTOR SPECIFICATION: HITACHI LCD PROJECTOR: Hitachi LCD Projector: 5000 Lumens, Brightness of 5000 ANSI Lumens. XGA (1024 x 768) Native Resolution. 1.5 to 2.5:1 Throw Ration. HDMI, VGA, S-Video, Composite, 2x USB-IN.
No
1
107
SPA/CPDPS/FUR-8 VENEER CEILING FILM SPECIFICATION: VENEER CEILING FILM: DETAILED TECHNICAL SPECIFICATION IS UPLOADED SEPARATELY.
Sqft
2600
108
SPA/CPDPS/ELE-46 SUPPLYING WALL MOUNTING FAN SPECIFICATION: SUPPLYING WALL MOUNTING FAN: Supplying wall mounting fan suitable to operate at single-phase 230v A.C. supply. 400mm Sweep
Each
12
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail