Construction Of Health Sub Centre Building At Chander Construction Of 1St Floor I/C Water Supply And Sanitary Installation
Tender Value
7.44 Lakhs
Estimated cost
Bid Submission
30 Oct 2020
0 days left
EMD
14900
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhawarna → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Health Sub Centre Building At Chander Construction Of 1St Floor I/C Water Supply And Sanitary Installation
BOQ
| Name of Work :- Construction of Health Sub Centre Building with Delivery Room at Chander. (SW:- Construction of First Floor building i/c water supply and Sanitry Installation). | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 18.72 | Per Square metre | |
| 2 | 2 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 45.99 | Per Square metre | |
| 3 | 3 | Providing form work with steel plates 3.15mm.(Three decimal fifteen milimetre) thick welded Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etc. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 3.47 | Per Square metre | |
| 4 | 4 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 7.63 | Per Running metre | |
| 5 | 5 | Providing and laying cement concrete work M-25 (M-twenty five) design mix to obtain the minimum compresive strength 25N/mm2 (Twenty five newton per square millimetre) and minimum cement content not less than 400 kg/cubic meter (Four hundred kilogram per cubic metre) mechanically mixed and vibrated and curing complete as per approved specification, drawing and design excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts above plinth level to any level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1.4 | Per Cubic metre | |
| 6 | 6 | Providing and laying cement concrete of grade M-25 (M-Twenty five) design mix to obtain the minimum crushing strength of 25 N/mm² with minimum cement contents of 400 kg (Four hundred Kilogram) per cubic metres with 20mm (Twenty millimetre) nominal size crushed stone aggregate mechanically mixed and vibrated including curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilever upto floor all level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government. | 3.92 | Per Cubic metre | |
| 7 | 7 | Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength 20N/mm2 (20 newton per square millimeter) and minimum cement content not less than 320 kg/cubic meter and curing complete and mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantiliver upto any floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate inclusive toll tax, GST and any other taxes imposed by the government. | 0.84 | Per Cubic metre | |
| 8 | 8 | Providing and laying tor steel of TISCO, SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification and approved, drawing design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 921 | Per Kilogram | |
| 9 | 9 | Providing & laying in RCC work smooth finishing of the exposed suface with cement mortar 1:3 (One cement isto three sand) including carriage of materials within all leads and lifts of materials and other incidentals . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 17.69 | Per Square Metre | |
| 10 | 10 | Providing & laying Cinder filling in depressed portion including carriage of materials within all leads and lifts of materials and other incidentals . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2.83 | Per Cubic metre | |
| 11 | 11 | Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 6.06 | Per Cubic metre | |
| 12 | 12 | Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 41.96 | Per Square metre | |
| 13 | 13 | Providing and fixing 12 mm (Twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters with frame of 1st class deodar wood for doors including bright finished/ black enamelled with necessary screws 40mm (Forty millimetre) thick frame. including carriage of materials within all leads, lifts, and other incidentals. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 12.08 | Per Square Metre | |
| 14 | 14 | Providing and fixing 40 mm thick (Fourty millimetre) Second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G (Eighty five guage) with wire of dia 0.56 mm (zero decimal five six millimetre) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government. | 5 | Per Square Metre | |
| 15 | 15 | Providing and fixing 12mm (Twelve millimetre) thick and 100 mm (Hundred millimetre) wide palmet with 25mm (Twenty five millimetre) diameter wooden curtain rod and brackets including fixing with 25x3mm (Twenty five into three millimetre) M.S. flat 10 cm (Ten centimetre) long and plugs etc. complete.1st class deodar wood complete including carriage of material within all leads, lifts and other incidential as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 16.83 | Per Running Metre | |
| 16 | 16 | Providing and fixing 19mm (Nineteen millimetre) thick water proof termit resistante commercial board of Centuary/ kit ply/ Dura ply/ Marino (ISI marked) shelves/ box for cup board with hard wood edging and to be finished with mica laminatory of approved shades complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 6.39 | Per Square Metre | |
| 17 | 17 | Providing and fixing 250X16mm (Two hundred fifty into Sixteen milimetre)size anodized Aluminium sliding door bolt anodized transparent or dyed to required colour and shade with nuts and screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 6 | Each | |
| 18 | 18 | Providing and fixing 250x10mm (Two hundred fifty into ten millimetre) matt finished aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 16 | Each | |
| 19 | 19 | Providing and fixing 100x10mm (One hundred into ten millimetre) matt finished aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 10 | Each | |
| 20 | 20 | Providing and fixing 125mm (One hundred millimetre) size matt finished aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 20 | Each | |
| 21 | 21 | Providing and fixing 100mm ( One Hundred millimetre) size matt finished aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 6 | Each | |
| 22 | 22 | Providing and fixing 150mm (One hundred fifty millimetre) oxidized aluminium single acting spring hinges with necessary screws etc.complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 23 | 23 | Providing and fixing 125 mm (One hundred twenty five milimetre) aluminium handles anodized transparent or dyed to required colour or shade with necessary screws etc. complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 52 | Each | |
| 24 | 24 | Providing and fixing oxidized aluminium hooks and eyes 150 mm (one hundred fifty milimetre) size.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 26 | Each | |
| 25 | 25 | Providing and fixing oxidized aluminium hasps and stapples 150 mm (one hundred fifty milimetre) (Safty type) with necessary screws complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 8 | Each | |
| 26 | 26 | Providing and fixing Mild Steel grills 10mm x10mm (Ten millimetre into ten millimetre) square bars in combination of 20x4mm (Twenty into four millimetre) Mild Steel flat of required patterns in frames of windows etcetera with round headed bolts and nuts or by screws complete as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government. | 326.8 | Per Kilogram | |
| 27 | 27 | Providing and fixing cement partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately as per H.P.P.W.D. specifications, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads lifts and other incidential. The rate is inclusive of octroi, royality, malkana, sales tax, toll tax, GST or all type of other taxes imposed by the Government. | 65.62 | Per Square metre | |
| 28 | 28 | Providing and laying 300x300x10 mm ( three hundred into three hundred into ten millimeters) thick antiskid ceramic tiles of premum quality of Nitco/ Kajaria/ Somany/ Well/ Johnson as per approved shade and manufacture in flooring over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per approved specification, drawing and design including entire . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 45.17 | Per Square metre | |
| 29 | 29 | Providing and laying 300x450 and 600x600mm( three hundred into four hundred fifty millimeter) and( six hundred into six hundred millimeter) acid resistance vetrified tiles of Restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade and design as per drawing and specification in flooring, skirting and dado laid over 12 mm ( twelve millimeters) thick cement mortar 1:3 (one cement: three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as reuired complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 18.56 | Per Square metre | |
| 30 | 30 | Providing and laying granite stone in flooring 20mm (Twenty millimetre) average thickness base of cement mortar 1:3 (One cement isto three sand) laid over and jointed withgrey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing andpolishing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2.47 | Per Square metre | |
| 31 | 31 | Providing and fixing pre-painted steel sheet ridge or hips 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 79.32 | Per Square metre | |
| 32 | 32 | Providing and fixing pre-painted steel sheet ridge or hips 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 21.16 | Per Running metre | |
| 33 | 33 | Providing and fixing 15cm (Fifteen centimetre) wide 45cm (Forty five centimetre) Overall semicircular plain G.I. Sheet 0.63mm (Zero decimal six three) millimetre thick gutter with iron brackets 40x3mm (Forty into three millimetre)size, bolts nuts and washers etc. including making necessary conections with rain water pipe complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 28.32 | Per Running metre | |
| 34 | 34 | Providing and fixing on wall face PVC (D-plast) rain water pipes of working pressure not less than 4.00/6.00 kg (four to six kilogram) per centimetre square including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia as per ISI marked pipe. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 12 | Per Running metre | |
| 35 | 35 | Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes including filling the joints with approved adhesive complete 110 mm (one hundred ten milimeter) dia PVC plain bend as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 4 | Each | |
| 36 | 36 | Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in beams joints, channels angles tees flats with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 22.88 | Per Quintal | |
| 37 | 37 | Providing and fixing moulded hand rail of M.S hollow pipe 50mm (Fifty Milimetre) dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately) . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 8.62 | Per Running metre | |
| 38 | 38 | Providing and fixing plain B.P. sheet 2 mm (two millimetre) thick fixed in soffits ceiling including jointing with gass/electric welding in position complete as per PWD specification (frame work is to be measured and paid for separately). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 18.07 | Per Square metre | |
| 39 | 39 | Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15mm(Sixteen into three decimal fifteen milimetres) lugs 10cm (Ten centimetres) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with glazing clips and special metal sash putty of approved make complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | |||
| 40 | 39.1 | Fixed steel windows | 3.28 | Per Square metre | |
| 41 | 39.2 | Top hung Ventilators | 1.23 | Per Square metre | |
| 42 | 40 | Providing and fixing factory made double shutter for steel windows side hung (one glazed and other wire gauged) of standard rolled steel section jointing mitred and welded with manufactured to relevant ISI standard specification with 16x3.15mm (Sixteen into three decimal fifteen millimeters) lugs10cm (Ten centimetres) long with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting, including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G (Eighty five gauge) with metal beading on other side complete including priming coat of red lead paint . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 11.39 | Per Square metre | |
| 43 | 41 | Providing and fixing M.S. channels in windows frames manufactured from M.S. channels section 40x75x4mm (Forty into seventy five into four millimetre) M.S. flat 75x4mm (Seventy five into Four millimetre) combination as per design drawing including hinges, jambs, beeds if required thrashold of M.S. angles 50x25mm (Fifty into Twenty five millimetre) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jambs including steel butts hinges 2.5mm (Two decimal five millimetre) thick with a provision of locking arrangements shock observers and specified and applying coat of approved steel primer after pretreatment of the surfaces as directed by the Engineer-in-Charge. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. | 79.19 | Per Running metre | |
| 44 | 42 | Providing and fixing angle iron door frames (single rebate) manufactured with frame for steel section of 35x35x4mm (Thirty five into thirty five into four millimetre) and M.S. flat 50x4 mm (Fifty into four millimetre) in combination as per Drawing and design including hinges jambs, locks, mild steel M.S. angle 50x25mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means lugs with split and tails to each jamb including steel butt hinges 2.5mm (Two decimal five millimetre) thick with provision of locking arrangement and shock observers as specified and applying a coat of special steel primer. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 19.85 | Per Running metre | |
| 45 | 43 | Painting two coats(excluding priming costs) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 109.28 | Per Square metre | |
| 46 | 44 | Applying a priming coat over new wood and wood bases surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paints brushing wood primer pink as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 44.28 | Per Square metre | |
| 47 | 45 | Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint brushing to give an any shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 44.28 | Per Square metre | |
| 48 | 46 | 15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth, in rough side with cement mortar 1:4 (one cement isto four sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 78.14 | Per Square metre | |
| 49 | 47 | 15mm (fifteen millimetre) thick cement plaster in single coat on the fair side of brick/concrete/stone walls for exterior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty milimeters) in girth, with cement mortar 1:5 (one cement isto five sand) complete including curing as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 46.27 | Per Square metre | |
| 50 | 48 | Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 64.33 | Per Square metre | |
| 51 | 49 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings & other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer as PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 82.34 | Per Square metre | |
| 52 | 50 | White washing with lime on undecorated wall surfaces (Two coat) to give an even shade including thoroughly brooming the surfaces to remove all dirt, dust mortar dirt and other foreign matter. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 25.88 | Per Square metre | |
| 53 | 51 | Providing and fixing M.S. fan clamp type-1 of 16mm dia (One to sixteen millimetre diametre) M.S. bar bent to shape with hooked ends in R.C.C. slab during laying including painting the exposed portion of loop, all as per standard design complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 54 | 52 | Providing and fixing Vitreous china water closet squatting pan Indian type W.C. pan size 580mm (Five hundred eighty millimetre) earth work bed concrete foot rest and trap to be measured and paid for separately Orrissa pattern. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 55 | 53 | Providing and fixing 10.00 Ltr.(Ten litres) P.V.C. low level flushing cistern with a pair of CI or mild steel brackets complete with fitting such as lead volve less syphon, 15 mm (Fifteen milimetre) nominal size brass bass valve with polythene float, CP brass handle unions and couplings for connections with inlet, outlet & overflow pipes, 40mm (Forty milimetre) dia. CP flush bend i/c cutting holes in wallas and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. | 1 | Each | |
| 56 | 54 | Providing and fixing P.V.C. 110mm (One hundred ten millimetre) size P or S trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe in cement mortar1:1 (one cement isto one sand) including carriage of materials within all leads, lifts and other incidentals as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 57 | 55 | Providing and fixing G.I inlet connection flush pipe with W.C pan. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 58 | 56 | Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or M.S. brackets painted white including cutting holes and making good the same but excluding fittings CERA make flat back 630x450 mm (Six hundred thirty into four hundred fifty) including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 59 | 57 | Providing and fixing vitreous china pedestal for wash basin CERA make including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 60 | 58 | Providing and fixing CP brass waste for wash basin or sink 32mm (Thirty two) millimetre dia ncluding carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 61 | 59 | Providing and fixing 100mm (One hundred milimetre) nominal size diameters CP grating of ESS or nahani trap of approved brand complete, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 4 | Each | |
| 62 | 60 | Providing and fixing C.P. Bottle Trap Jel/ EES- ESS for wash basin and sink 32mm (Thirty two milimetre) dia. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 63 | 61 | Providing and fixing 32mm (Thirty two millimetre) diameters C.P. brass waste (Heavy duty make ISI marked NO-8931 & 8934) for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 64 | 62 | Providing and fixing 600mmx450mm (six hundred millimeter into four hundred fifty millimeter) beveled edge mirror of superior glass mounted on 6mm (six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers of Atul/Modi Guard/ Golden fish including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 65 | 63 | Providing and fixing 600x120mm (Six hundred into one hundred twenty milimetres) glass shelf with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 66 | 64 | Providing and fixing C.P. brass towel rail size 600x20mm (Six hundred into twenty millimetre) of continental series of Jaguar/Classic of Hindware/Cera complete with C.P. brass brackets fixed to wooden plugs with C.P. brass socket including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 67 | 65 | Providing and fixing chromium plated brass soap dish of ESS with C.P. brass brackets fixed with cleats with C.P. brass screws, within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 68 | 66 | Providing and fixing 15mm (Fifteen milimetres) diameters C.P. brass bib tap of continental/ Hindware/Classic Series within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 5 | Each | |
| 69 | 67 | Providing and fixing C.P. brass pillar tap Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked No. 8931 & 8934) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 70 | 68 | Providing and fixing casealed C.P. brass stop cock Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavey duty makes ISI marked ) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 5 | Each | |
| 71 | 69 | Providing and placing water tank of make PVC (Poly venyl Chloride) Sintex having capacity 500 (five hundred) litres each with necessary fitting including over flow pipes scour pipe and bull valve and with cover locking arrangement of good quality including providing pads of sizes as required for inlet and outlet and inside painting of good quality all complete including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 72 | 70 | Providing and laying to galvanized mild steel tubes (medium grade) 20mm (Twenty millimetre nonminal size/ diametre) in trenches including all tube fittings of Jindal/TATA Steel such as nipples, elbows, unions, tees and clamps and (earth work trenches paid for seperately) of within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 20 | Per running metre | |
| 73 | 71 | Providing and laying to galvanized mild steel tubes (medium grade) 15mm (fifteen millimetre nominal bore/ diametre) including all tube fittings wall sealing and floor of Jindal/TATA Steel nipples, elbows, unions, tees and clamps and within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 30 | Per running metre | |
| 74 | 72 | Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe I.S.I Marked including fixing with approvfed adhesive etc. complete The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. Rate inclusive toll tax, GST and any other taxes imposed by the government. | |||
| 75 | 72.1 | 100 mm (One hundred millimeter) diametre | 5.1 | Per running metre | |
| 76 | 72.2 | 75 mm (Seventy five millimeter) diametre | 8.6 | Per running metre | |
| 77 | 73 | Providing and fixing PVC Single Equal Branch with oval access ISI Marked insertion rubber washer 3mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etc. complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | |||
| 78 | 73.1 | 100 mm ( One hundred millimetre) diametre. | 3 | Each | |
| 79 | 73.2 | 75 mm (Seventy five millimetre) diametre. | 5 | Each | |
| 80 | 74 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etcetera including carriage of materials within all leads and lifts complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | |||
| 81 | 74.1 | 100mm (one hundred millimetre) diametre. | 3 | Each | |
| 82 | 74.2 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 83 | 75 | Providing lead caulked joined to sand cast iron/ cast (spun) iron pipes and filtings including testing of joints with approved adhesive etcetera including carriage of materials within all leads and lifts complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | |||
| 84 | 75.1 | 100mm (one hundred millimetre) diametre. | 3 | Each | |
| 85 | 75.2 | 75mm (seventy five millimetre) diametre. | 5 | Each | |
| 86 | 76 | Providing and fixing PVC Floor Trap size 110x75 mm (one hundred ten into seventy five millimeters) ISI marked self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor complete.within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 4 | Each | |
| 87 | 77 | Providing and fixing 32 mm dia (Thirty two millimetre) rubber plug for wash basin and filtings including testing of joints with approved adhesive etcetera including carriage of materials within all leads and lifts complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 2 | Each | |
| 88 | 78 | Providing and fixing 15 mm dia (Fifteen millimetre) mixer for kitchen sink and filtings including testing of joints with approved adhesive etcetera including carriage of materials within all leads and lifts complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 89 | 79 | Providing and fixing CP brass bath shower 15mm (Fifteen millimeters) dia of era/Jal made including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each | |
| 90 | 80 | Providing and fixing heavy quality stainless steel kitchen sink of approved standard ISI marked with drain board and C.P. waste pipe C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting 600x450x250 mm (six hundred into four hundred fifty into two hundred fifty millimetre) with bowl depth 20 mm ( twenty millimeters) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government. | 1 | Each |
AI Tender Summary
Tender Timeline
Oct 17, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 30, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender