| Name of Work : REPAIR TO DAMAGED MS GRILL, STAIRCASE RAILING, COMMON AREA FLOORING, PLASTERING, DAMAGED PARAPET, PLINTH PROTECTION AND CONNECTED WORKS AT RASHI COMPLEX UNDER AGE B/R-II OF GE (NW) NAVY NAGAR, COLABA, MUMBAI | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.\nNote : Ser Item No 1.00 to 33.00 Work shall be carried out upto and including G+14 storey bldg. Rate incl scaffolding & safety net cloth at places. | 1500 | Sqm | |
| 2 | 2 | M&L machine cut Kota stone as in treads of steps, floors ( greenish colour, mirror polished) slab flooring 18 to 20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing and mirror polishing, over & incl 20mm thick screed bed in CM 1:6 complete all as specified. | 1000 | Sqm | |
| 3 | 3 | all as per item No 2.00 above as in vertical surface skirting ,riser of step,dado and pillars etc including taking down cement plaster on walls and racking out joints,hacking for key, scrubing down with water etc and 10 mm thick rendering on brick or concrete suface in CM 1:4 complete all as specified and directed | 500 | Sqm | |
| 4 | 4 | M&L for mirror polishing of Kota/Marble stone fixed in any position and of any description all complete as specified and directed. | 300 | Sqm | |
| 5 | 5 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each . | 50 | Each | |
| 6 | 6 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in double steps cill of aluminium slding window 18 to 20 mm thick over 20 mm thick screed bed in cement mortar 1:3 complete all as specified. | 30 | Sqm | |
| 7 | 7 | M&L machine cut Kota stone ( greenish colour, pre mirror polished) slab in one piece as in lintel and and sides of aluminium sliding window 18 to 20 mm thick over 15 mm thick rendering in CM 1:3 complete all as specified and directed. | 75 | Sqm | |
| 8 | 8 | S & F powder coated anodised aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws locking arrangements etc. complete all as specified and directed by Engr-in-Charge. \nNote: Minimum 25 micron anodisation for all aluminium sections) | 87.15 | Kg | |
| 9 | 9 | S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane all complete. | 13.5 | Sqm | |
| 10 | 10 | M&L anodised aluminium sheeting 22 gauge thick fixed in repairs as in crumple section. | 150 | Sqm | |
| 11 | 11 | S&F PVC covers to MS railings of stair case hand rail all as specified and directed by Engr-in-Charge. | 300 | RM | |
| 12 | 12 | Dismantling of MS grill of any description and position etc. | 12 | Qtl | |
| 13 | 13 | M&L for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks, man hole chambers frames and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete. | 1200 | Kg | |
| 14 | 14 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. | 500 | Sqm | |
| 15 | 15 | Prepration of old decorated plastered surfaces of walls, pillars, cornices by brooming down or steel brushing scraping down smoke roots, molds, moss and efforescence salts, trading oil greasy spots etc and applying one coat of white wash on walls complete all as specified and direceted. | 2500 | Sqm | |
| 16 | 16 | Taking down cement plaster of any description on brick walls or concrete surfaecs etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed . | 1150 | Sqm | |
| 17 | 17 | M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor & WPC shall be measured and paid separately) | 500 | Sqm | |
| 18 | 18 | Supply only integral water proofing compound of approved make as per ISI. | 22 | Kg | |
| 19 | 19 | M & L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. | 500 | Sqm | |
| 20 | 20 | Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified. | 150 | Sqm | |
| 21 | 21 | M&L three coat white washing on new plastered surface on walls including prepration of surface all as specified and directed | 500 | Sqm | |
| 22 | 22 | M&L three coat white washing on new plastered surface on ceiling including prepration of surface all as specified and directed | 150 | Sqm | |
| 23 | 23 | M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer & bio wash on walls incl necessary scaffolding complete. | 500 | Sqm | |
| 24 | 24 | Chipping ,removing carefully concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. (columns, Beams, chajjas, slabs & RCC OHT) complete as directed by Engr-in-Charge. Hard concrete shopuld not be removed by force. | 50 | Sqm | |
| 25 | 25 | M&L for clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material, dirt etc. Complete and applying two coats of alkaline rust converting primer FEOVERTASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hours between the coats and applying protective coating IPNET-RB complete all as specified and directed.\n(Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) \nNote :- Measurement on the basis of area of concrete exposed. | 50 | Sqm | |
| 26 | 26 | M & L for carry out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100/protectsil CIT/ferogard 903 on concrete surface .(This inhibitor shall have migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It should have property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete complete as directed by Engr-in-Charge. (Make : Fosroc/Sika/BASF/Krisha conchem/Dr Fixit Pidilite) | 50 | Sqm | |
| 27 | 27 | Replacement of steel reinforcement with TMT bars of appropriate size \nwhere 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed. | 80 | Kg | |
| 28 | 28 | M & L for providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster conforming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete all complete as directed by Engr-in-Charge. \n | 50 | Sqm | |
| 29 | 29 | M&L for building up the profile of structrual members by using latex B2 modified air cured mortar system (polymer modified mortar) (1:5:15=1 monobond-5 Cement-15 Sand) -in damaged areas in 30mm thickness including leveling profiling etc complete all as specified and directed.\n | 50 | Sqm | |
| 30 | 30 | M&L preparation of old decorated surfaces of wall including washing and applying two coat of Acrylic emulsion paint exterior grade (100% Acrylic) including necessary scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- work to be carried out upto G+14th floor) | 12000 | Sqm | |
| 31 | 31 | M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC. | 4000 | Sqm | |
| 32 | 32 | M&L preparation of old painted steel surfaces of over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. | 1500 | Sqm | |
| 33 | 33 | M&L for writing letter or figures size n.exc 45 cm as per existing numbering of the building (Block, Roman, Italic or Indian) all as specified and directed by Engr in Charge. | 20 | 10 Nos | |
| 34 | 34 | M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed. | 400 | Sqm | |
| 35 | 35 | Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match | 400 | Sqm | |
| 36 | 36 | Dismantling wrought iron or mild steel work of any description not otherwise provided for | 2.5 | Qtl | |
| 37 | 37 | S&F for MS Plates chequred (Gde E-250, quality-A) for manhole cover fixed with brackets/handle etc completed all as specified and directed. | 250 | Kg | |
| 38 | 38 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed. | 465 | Sqm | |
| 39 | 39 | M & L for demolition of cement conrete (unreinforced) in ground floor and paving n.exc 15 cm thickness. | 4.88 | Cum | |
| 40 | 40 | M&L for PCC type D2, 1:4:8 using (40 mm graded agg) 75mm thick in sub floors, sub-base, floors and paving, plinth protection etc complete all as specified. | 65 | Sqm | |
| 41 | 41 | M&L for screed bedding 20mm thick in CM 1:6 below chequred tiles finished even and smooth without using extra cement. | 65 | Sqm | |
| 42 | 42 | M&L for Chequred cement concrete tiles 30mm x 300mm x 20-25mm thick set, jointed in neat cement slurry and pointed with grey cement & no pigment in path all as specified. | 65 | Sqm |
Copyright © 2020 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
