Maintenance Of Furniture At Dalhousie, DALHOUSIE-Himachal Pradesh

maintenance of furniture at dalhousie-1 Almirah Med Steel W/ Shelves/ Almirah Med Steel 1/2H, 1/2 Shelves (FD -67, FD-1032) nRenewal of following old unserviceable parts by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 2 Renewal of broken/ unservicable mild steel hinges of size 75 mm and of same pattern, complete as shown in drawings, specified and as directed by Engr-in-Charge. 3 Renewal of broken /unserviceable door handle with new mild steel chromium plated handles with fittings complete all as shown on drawing and as specified and directed by Engr-in-Charge. 4 Renewal of unserviceable locks with new lock, 50mm size, 6 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/Link 5 Renewal of unserviceable rods with clamps for top and bottom locking of doors and providing new rods of 10 mm dia MS bar made to existing shape including cover for lock and clamp complete all as shown on drawing, as specified and directed by Engr-in-Charge. 6 Renewal of old worn out unserviceable shelves made out of mild steel plain sheet of 1mm thick nominal thickness, made to shape and size, complete all as shown on drawing, as specified and directed by Engr-in-Charge. 7 Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying one coat of synthetic emamel paint olive greeen by spray machine complete all as specified and directed by Engr-in-Charge. 8 Bed plywood Top (FD-246, FD-1102, FD-247 & FD-21) nRenewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 9 Renewal of unservicable long rails made out of sheesham wood, made to shape as per drawings after taking out old broken long rails complete all as specified and directed by Enge-in-charge. 10 Renewal of unservicable stiffners of sheesham wood, duly wroughted as per drawings after taking out old broken/ cracked stiffeners care fully complete all as specified and directed by Engr-in-charge. 11 Renewal of unservicable head rest made of sheesham wood duly covered with plywood 4.0 mm thick one side teak faced all as per drawing after taking out old broken/ cracked head rest carefully complete all as specified and directed by Engr-in-charge. 12 Renewal of unservicable foot rest made of sheesham wood duly covered with plywood 4.0mm thick one side teak faced aal as per drawing after taking out old broken/ cracked foot rest carefully complete all as specified and directed by Engr-in-charge. 13 Renewal of unservicable leg of size 60X60X660 mm of sheesham wood complete all as specified and directed by Engr-in-charge. 14 Renewal of unservicable bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with screws and three stiffeners after taking out the unserviceable plywood top complete all as specified and directed by Engr-in-charge. 15 Polishing to unservicable bed new or old exposed to view with french polish after filling the holes/ cracks with putty, making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge. 16 Chair Easy (FD-229, FD-1108 & FD-17) nRenewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 17 Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge. 18 Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge. 19 Chair CB steel (FD-75) nRenewal of following old unserviceable parts of chair CB steel by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 20 S& F for new MS cleats of size 50X25X3 mm in replacement of old unsv cleats and welding of joints and cracks to frame complete all as specified and directed by Engr-in-charge. 21 Renewal of exicting old unsv cap and S & F new PVC cap chair steel without arms complete all as specified and directed by Engr-in-charge. 22 Renewal of exicting old unsv shoes and S & F new hard rubber shoes chair steel without arms complete all as specified and directed by Engr-in-charge. 23 Renewal of seat of chair CB steel with arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old seat and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge. 24 Renewal of seat of chair CB steel without arms made out of sheesham wood duly polished and canned with 2.5mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge. 25 Renewal of back of chair CB steel with arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge. 26 Renewal of back of chair CB steel without arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge. 27 Renewal of arms for chair CB steel with arms made out of sheesham wood made to shape duly wroughted all as per drg after taking out old/ cracked arms carefully, complete all as specified and directed by Engr-in-charge. 28 Painting to chair in full with one coat of synthetic enamelled paint OG colour by spray machine after making the surface smooth with emery paper complete all as specified and directed. 29 CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220) nRenewal of following old unserviceable parts of CHARPOY GI PIPE WITH PLYWOOD TOP by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 30 Cutting out old newar from charpoy GI pipe and supply and fixing bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with4 mm dia , 65 mm long nuts / bolts and washer including making drill holes in 03 no each long rail and o2 no each short rail the frame of GI pipe, complete all as specified and directed by Engr-in-charge. 31 Renewal of old unsv long rail made of GI tubing 32mm internal bore medium grade ISI marked and fixing new long rail in the same position complete all as specified and directed by Engr-in-charge. 32 Renewal of short rail made of GI tubing 32mm internal bore medium grade ISI marked both side threaded all as per drawing after taking out old broken threaded GI tubing complete all as specified and directed by Engr-in-charge. 33 Renewal of elbow, GI, 3 way, 32mm, ISI marked after taking out cracked elbows all as per drawing complete all as specified and directed by Engr-in-charge. 34 Renewal of legs made out of tubing GI 32mm duly threaded both side retrieved from Serial No (5.02 & 5.03) here-in-before all as per drawings complete all as specified and directed by Engr-in-charge. 35 Renewal of GI check nuts 32mm all as per drawing after taking out old/ cracked check nuts complete all as specified and directed by Engr-in-charge. 36 Table Office Clerk Steel/officer steel (FD-84 ,FD-1003 & 1008) nRenewal of following old unserviceable parts of Table Office Clerk Steel by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 37 Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in-charge. 38 Renewal of unserviceable top made out of size 1200x600x19mm and 1200 X 750 X19 mm and 1370x760x19 mm thick prelaminated particle board one side teak faced, exterior grade with 4mm teak wood beading all round the top , complete all as specified and directed by Engr-in-charge. 39 Gas welding for broken joints of table, complete all as specified and directed by Engr-in-charge. 40 Applying one coat of OG synthetic enamelled paints of approved quality by spray gun externally as well internally after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge. 41 Chair Dining CB/ Chair Dining JCOs/ Ors (FD-279, FD-1105 & FD-16, FD/ E6/ MAP/ 05 nRenewal of following old unserviceable parts of Chair Dining CB/ Chair Dining JCOs/ Ors by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 42 Cutting unsv plastic cane and Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide half round in Godrej pattern complete all as specified and directed by Eng-in-Charge. 43 Polishing to chair new or old with french polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision complete all as specified and directed by Engr-in-Chrge. 44 Chair writing FD-20,250,1107, 271 & 280 nRenewal of following old unserviceable parts of chair writing by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 45 Cutting Unsv plastic cane and Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge. 46 Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge. 47 CHAIR VERANDAH (FD-256, FD-333 & FD-359) nRenewal of following old unserviceable parts of CHAIR VERANDAH by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 48 Renewal of unserviceable 20mm dia mild steel conduit pipe with new mild steel tubular conduit pipe 20mm dia x 75 mm long of 1.60 mm wall thickness and welded to burnt out piece of legs of chair and also spot welding of cracks and joints complete as shown on drawings, specified and as directed by Engr-in-charge. 49 Painting of old chair verandah (steel frame structure) with one coats of synthetic enamel white paint by spray machine after complete removal of existing paint including preparation of surface complete all as specified. 50 Renewal of unserviceable cane and recaning complete seat and back of chair veradah with plastic cane 4mm wide of approved quality in mat pattern, complete all as specified in drawing and directed by Engr-in-Charge. 51 Renewal of exicting old unsv shoes and S & F new hard rubber shoes chair steel without arms complete all as specified and directed by Engr-in-charge. 52 Sofa Set 5/ 4 seater (FD-281 & FD-1113) nRenewal of following old unserviceable parts of Sofa Set 5 seater by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 53 Renewal of unservicable cushion foam size 21x22x100mm thick 32 density covered with upholstery cloth (AS approved by Engr-in-Charge) duly stitched complete all as per drawing and as directed by Engr-in-Charge. nMake of cushion shall be : Sleepwell/ Feather foam. 54 Table 900x600x760mm without drawer/with Drawer (FD-284 & FD-55, FD-253, FD-224) nRenewal of following old unserviceable parts of Table 900x600x760mm without drawer by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 55 Renewal of unservicable top made out of pre-laminated particle board size 900x600x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge. 56 Polishing the table with french polish after filling the holes/ cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct vision complete all as specified and directed by Engr-in-charge. 57 Table Dining 6 pers (FD-273, FD-1115) nRenewal of following old unserviceable parts of Table Dining 6 pers by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 58 Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge. 59 Renewal of unservicable long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge. 60 Renewal of unservicable short rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge. 61 Renewal of unservicable top made out of pre-laminated particle board size 1500x900x19mm thick (OST), made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge. 62 Polishing the table with french polish after filling the holes, cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge. 63 Table Centre (FD-274 & FD-29) nRenewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 64 Renewal of unservicable top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge. 65 Polishing the table with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge. 66 Teapoy Wooden (FD-278, FD-232) nRenewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 67 Renewal of unservicable Teapoy top made out of pre-laminated particle board size 600x450x19mm and 600x540x19 mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge. 68 Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge. 69 Teapoy Varandah (FD-255) nRenewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 70 Renewal of unservicable Teapoy top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge. 71 Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge. 72 Table Peg (FD-236,FD-1114 & FD-277) nRenewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 73 Renewal of unservicable top made out of pre-laminated particle board, exterior grade, one side teak face of size 450x300x19mm thick made to shape duly teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge. 74 Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge. 75 TABLE BED SIDE/ BED SIDE (MAP) (FD-28, 248, 276, FD/ MAP/ 07 & FD/E6/MAP/15 (R)) nRenewal of following old unserviceable parts of TABLE BED SIDE/ BED SIDE (MAP) by replacing the same with new all as per drawings or sample kept in GEs office and making item serviceable:- 76 Renewal of unservicable table top made out of pre-laminated particle board of size 450x450x19mm thick (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge. 77 Polishing with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge. 78 Renewal of unservicable drawer (front drawer) made out of board 18mm thick, exterior grade, with laminated sheet 1mm thick on front of drawer (Laminated sheet on front side of drawer only)and bottom of drawer shall be 6 mm thick ply as specified 02 nos of telescopic channel shall be provided for smooth running of drawer complete all as specified and directed by Engr-in-Charge. 79 new stainless steel 50 mm long C shape handle complete all as specified and directed by Engr-in-Charge. 80 newmagnetic catcher complete all as specified and directed by Engr-in-Charge. 81 New 18 mm mild steel square pipe frame work black powder coated(18 gauge) complete all as specified and directed by Engr-in-Charge. 82 Renewal of unservicable bottom of table made out of plywood 6mm thick (exterior grade) both side commercial complete all as specified and directed by Engr-in-Charge. 83 Table Dining Ors (FD-165) nRenewal of following old unserviceable parts of Table Dining Ors by replacing the same with new all as per drgs or sample kept in GEs office and making item serviceable:- 84 Renewal of top made out of pre-laminated particle board size 1800x900x19mm thick one side teak face with teak wood edging 4mm thick all round the top as per drgs after taking out old broken/cracked top carefully, complete all as specified and directed by Engr-in-charge.

INR 500 /-

INR 30000.0 /-

INR 15 Lakhs /-

Name of Work: MAINT OF FURNITURE AT DALHOUSIE
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	Almirah Med Steel W/ Shelves/ Almirah Med Steel 1/2H, 1/2 Shelves (FD -67, FD-1032)\nRenewal of following old unserviceable parts by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
2	1.01	Renewal of broken/ unservicable mild steel hinges of size 75 mm and of same pattern, complete as shown in drawings, specified and as directed by Engr-in-Charge.		150	Each
3	1.02	Renewal of broken /unserviceable door handle with new mild steel chromium plated handles with fittings complete all as shown on drawing and as specified and directed by Engr-in-Charge.		100	Each
4	1.03	Renewal of unserviceable locks with new lock, 50mm size, 6 liver brass with duplicate keys complete all as shown on drawing, as specified and directed by Engr-in-Charge. Make : Harrison / Jayant/Link		100	Each
5	1.04	Renewal of unserviceable rods with clamps for top and bottom locking of doors and providing new rods of 10 mm dia MS bar made to existing shape including cover for lock and clamp complete all as shown on drawing, as specified and directed by Engr-in-Charge.		100	Each
6	1.05	Renewal of old worn out unserviceable shelves made out of mild steel plain sheet of 1mm thick nominal thickness, made to shape and size, complete all as shown on drawing, as specified and directed by Engr-in-Charge.		400	Each
7	1.06	Painting to complete almirah internally and externally both sides after preparing the surface by scraping, cleaning, denting, applying putty etc and finally applying one coat of synthetic emamel paint olive greeen by spray machine complete all as specified and directed by Engr-in-Charge.		100	Each
8	2	Bed plywood Top (FD-246, FD-1102, FD-247 & FD-21)\nRenewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
9	2.01	Renewal of unservicable long rails made out of sheesham wood, made to shape as per drawings after taking out old broken long rails complete all as specified and directed by Enge-in-charge.		25	Each
10	2.02	Renewal of unservicable stiffners of sheesham wood, duly wroughted as per drawings after taking out old broken/ cracked stiffeners care fully complete all as specified and directed by Engr-in-charge.		30	Each
11	2.03	Renewal of unservicable head rest made of sheesham wood duly covered with plywood 4.0 mm thick one side teak faced all as per drawing after taking out old broken/ cracked head rest carefully complete all as specified and directed by Engr-in-charge.		25	Each
12	2.04	Renewal of unservicable foot rest made of sheesham wood duly covered with plywood 4.0mm thick one side teak faced aal as per drawing after taking out old broken/ cracked foot rest carefully complete all as specified and directed by Engr-in-charge.		25	Each
13	2.05	Renewal of unservicable leg of size 60X60X660 mm of sheesham wood complete all as specified and directed by Engr-in-charge.		25	Each
14	2.06	Renewal of unservicable bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with screws and three stiffeners after taking out the unserviceable plywood top complete all as specified and directed by Engr-in-charge.		75	Each
15	2.07	Polishing to unservicable bed new or old exposed to view with french polish after filling the holes/ cracks with putty, making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.		75	Each
16	3	Chair Easy (FD-229, FD-1108 & FD-17)\nRenewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
17	3.01	Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.		100	Each
18	3.02	Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface o direct vision complete all as specified and directed by Engr-in-charge.		100	Each
19	4	Chair CB steel (FD-75)\nRenewal of following old unserviceable parts of chair CB steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
20	4.01	S& F for new MS cleats of size 50X25X3 mm in replacement of old unsv cleats and welding of joints and cracks to frame complete all as specified and directed by Engr-in-charge.		40	Each
21	4.02	Renewal of exicting old unsv cap and S & F new PVC cap chair steel without arms complete all as specified and directed by Engr-in-charge.		40	Each
22	4.03	Renewal of exicting old unsv shoes and S & F new hard rubber shoes chair steel without arms complete all as specified and directed by Engr-in-charge.		70	Each
23	4.04	Renewal of seat of chair CB steel with arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old seat and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.		20	Each
24	4.05	Renewal of seat of chair CB steel without arms made out of sheesham wood duly polished and canned with 2.5mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.		20	Each
25	4.06	Renewal of back of chair CB steel with arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.		20	Each
26	4.07	Renewal of back of chair CB steel without arms made out of sheesham wood duly polished and canned with 2.5 mm wide plastic cane in Godrej pattern and border 3mm wide plastic cane after removing the old back and fixing the same with new nuts and bolts complete all as specified and directed by Engr-in-charge.		20	Each
27	4.08	Renewal of arms for chair CB steel with arms made out of sheesham wood made to shape duly wroughted all as per drg after taking out old/ cracked arms carefully, complete all as specified and directed by Engr-in-charge.		20	Each
28	4.09	Painting to chair in full with one coat of synthetic enamelled paint OG colour by spray machine after making the surface smooth with emery paper complete all as specified and directed.		40	Each
29	5	CHARPOY GI PIPE WITH PLYWOOD TOP (FD-220) \nRenewal of following old unserviceable parts of CHARPOY GI PIPE WITH PLYWOOD TOP by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
30	5.01	Cutting out old newar from charpoy GI pipe and supply and fixing bed plywood top 12mm thick (07 Ply) BWR, commercial type of size 1800x900mm, fixed with4 mm dia , 65 mm long nuts / bolts and washer including making drill holes in 03 no each long rail and o2 no each short rail the frame of GI pipe, complete all as specified and directed by Engr-in-charge.		400	Each
31	5.02	Renewal of old unsv long rail made of GI tubing 32mm internal bore medium grade ISI marked and fixing new long rail in the same position complete all as specified and directed by Engr-in-charge.		100	Each
32	5.03	Renewal of short rail made of GI tubing 32mm internal bore medium grade ISI marked both side threaded all as per drawing after taking out old broken threaded GI tubing complete all as specified and directed by Engr-in-charge.		125	Each
33	5.04	Renewal of elbow, GI, 3 way, 32mm, ISI marked after taking out cracked elbows all as per drawing complete all as specified and directed by Engr-in-charge.		450	Each
34	5.05	Renewal of legs made out of tubing GI 32mm duly threaded both side retrieved from Serial No (5.02 & 5.03) here-in-before all as per drawings complete all as specified and directed by Engr-in-charge.		250	Each
35	5.06	Renewal of GI check nuts 32mm all as per drawing after taking out old/ cracked check nuts complete all as specified and directed by Engr-in-charge.		75	Each
36	6	Table Office Clerk Steel/officer steel (FD-84 ,FD-1003 & 1008)\nRenewal of following old unserviceable parts of Table Office Clerk Steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
37	6.01	Removing of dents and bends and smoothening the defective place and repairs to drawers as to slide easily in and out of the table including lock of drawers, complete all as specified and directed by Engr-in-charge.		225	Each
38	6.02	Renewal of unserviceable top made out of size 1200x600x19mm and 1200 X 750 X19 mm and 1370x760x19 mm thick prelaminated particle board one side teak faced, exterior grade with 4mm teak wood beading all round the top , complete all as specified and directed by Engr-in-charge.		85	Each
39	6.03	Gas welding for broken joints of table, complete all as specified and directed by Engr-in-charge.		75	Each
40	6.04	Applying one coat of OG synthetic enamelled paints of approved quality by spray gun externally as well internally after preparing the steel surfaces including smoothing the whole surface with emery paper, complete all as specified and directed by Engr-in-charge.		85	Each
41	7	Chair Dining CB/ Chair Dining JCOs/ Ors (FD-279, FD-1105 & FD-16, FD/ E6/ MAP/ 05\nRenewal of following old unserviceable parts of Chair Dining CB/ Chair Dining JCOs/ Ors by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
42	7.01	Cutting unsv plastic cane and Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide half round in Godrej pattern complete all as specified and directed by Eng-in-Charge.		250	Each
43	7.02	Polishing to chair new or old with french polish after filling the holes, cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina to the surface direct to vision complete all as specified and directed by Engr-in-Chrge.		250	Each
44	8	Chair writing FD-20,250,1107, 271 & 280 \nRenewal of following old unserviceable parts of chair writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
45	8.01	Cutting Unsv plastic cane and Recanning of complete seat with plastic cane of 2.5 mm wide half round and perimeter canning with 3.5 mm wide hald round of make premium in Godrej pattern complete all as specified and directed by Engr-in-charge.		90	Each
46	8.02	Polishing to chair new or old with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ burnt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.		90	Each
47	9	CHAIR VERANDAH (FD-256, FD-333 & FD-359)\nRenewal of following old unserviceable parts of CHAIR VERANDAH by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
48	9.01	Renewal of unserviceable 20mm dia mild steel conduit pipe with new mild steel tubular conduit pipe 20mm dia x 75 mm long of 1.60 mm wall thickness and welded to burnt out piece of legs of chair and also spot welding of cracks and joints complete as shown on drawings, specified and as directed by Engr-in-charge.		325	Each
49	9.02	Painting of old chair verandah (steel frame structure) with one coats of synthetic enamel white paint by spray machine after complete removal of existing paint including preparation of surface complete all as specified.		325	Each
50	9.03	Renewal of unserviceable cane and recaning complete seat and back of chair veradah with plastic cane 4mm wide of approved quality in mat pattern, complete all as specified in drawing and directed by Engr-in-Charge.		300	Each
51	9.04	Renewal of exicting old unsv shoes and S & F new hard rubber shoes chair steel without arms complete all as specified and directed by Engr-in-charge.		1200	Each
52	10	Sofa Set 5/ 4 seater (FD-281 & FD-1113)\nRenewal of following old unserviceable parts of Sofa Set 5 seater by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
53	10.01	Renewal of unservicable cushion foam size 21''x22''x100mm thick 32 density covered with upholstery cloth (AS approved by Engr-in-Charge) duly stitched complete all as per drawing and as directed by Engr-in-Charge.\nMake of cushion shall be : Sleepwell/ Feather foam.		200	Each
54	11	Table 900x600x760mm without drawer/with Drawer (FD-284 & FD-55, FD-253, FD-224)\nRenewal of following old unserviceable parts of Table 900x600x760mm without drawer by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
55	11.01	Renewal of unservicable top made out of pre-laminated particle board size 900x600x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.		20	Each
56	11.02	Polishing the table with french polish after filling the holes/ cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface on direct vision complete all as specified and directed by Engr-in-charge.		20	Each
57	12	Table Dining 6 pers (FD-273, FD-1115)\nRenewal of following old unserviceable parts of Table Dining 6 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
58	12.01	Renewal of unservicable legs made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked legs carefully complete all as specified and directed by Engr-in-charge.		10	Each
59	12.02	Renewal of unservicable long rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.		10	Each
60	12.03	Renewal of unservicable short rails made of sheesham wood, made to shape, wrought all as per drawing after taking out old broken/ cracked rails carefully complete all as specified and directed by Engr-in-charge.		10	Each
61	12.04	Renewal of unservicable top made out of pre-laminated particle board size 1500x900x19mm thick (OST), made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.		75	Each
62	12.05	Polishing the table with french polish after filling the holes, cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.		75	Each
63	13	Table Centre (FD-274 & FD-29)\nRenewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
64	13.01	Renewal of unservicable top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.		80	Each
65	13.02	Polishing the table with french polish after filling the holes cracks with putty and make the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision complete all as specified and directed by Engr-in-charge.		80	Each
66	14	Teapoy Wooden (FD-278, FD-232)\nRenewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
67	14.01	Renewal of unservicable Teapoy top made out of pre-laminated particle board size 600x450x19mm and 600x540x19 mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.		50	Each
68	14.02	Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.		50	Each
69	15	Teapoy Varandah (FD-255)\nRenewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
70	15.01	Renewal of unservicable Teapoy top made out of pre-laminated particle board size 900x450x19mm thick (OST) made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.		50	Each
71	15.02	Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.		50	Each
72	16	Table Peg (FD-236,FD-1114 & FD-277)\nRenewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
73	16.01	Renewal of unservicable top made out of pre-laminated particle board, exterior grade, one side teak face of size 450x300x19mm thick made to shape duly teak wood edging 4mm thick all round the top as per drawings after taking out old broken/ cracked top complete all as specified and directed by Engr-in-charge.		50	Each
74	16.02	Polishing the table with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.		50	Each
75	17	TABLE BED SIDE/ BED SIDE (MAP) (FD-28, 248, 276, FD/ MAP/ 07 & FD/E6/MAP/15 (R))\nRenewal of following old unserviceable parts of TABLE BED SIDE/ BED SIDE (MAP) by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-
76	17.01	Renewal of unservicable table top made out of pre-laminated particle board of size 450x450x19mm thick (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.		75	Each
77	17.02	Polishing with french polish after filling the holes cracks with putty and making the surface smooth with emery paper and applying raw/ brunt saina on the surface to direct vision, complete all as specified and directed by Engr-in-charge.		75	Each
78	17.03	Renewal of unservicable drawer (front drawer) made out of board 18mm thick, exterior grade, with laminated sheet 1mm thick on front of drawer (Laminated sheet on front side of drawer only)and bottom of drawer shall be 6 mm thick ply as specified 02 nos of telescopic channel shall be provided for smooth running of drawer complete all as specified and directed by Engr-in-Charge.		75	Each
79	17.04	new stainless steel 50 mm long C shape handle complete all as specified and directed by Engr-in-Charge.		75	Each
80	17.05	newmagnetic catcher complete all as specified and directed by Engr-in-Charge.		75	Each
81	17.06	New 18 mm mild steel square pipe frame work black powder coated(18 gauge) complete all as specified and directed by Engr-in-Charge.		75	Each
82	17.07	Renewal of unservicable bottom of table made out of plywood 6mm thick (exterior grade) both side commercial complete all as specified and directed by Engr-in-Charge.		75	Each
83	18	Table Dining Ors (FD-165)\nRenewal of following old unserviceable parts of Table Dining Ors by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-
84	18.01	Renewal of top made out of pre-laminated particle board size 1800x900x19mm thick one side teak face with teak wood edging 4mm thick all round the top as per drgs after taking out old broken/cracked top carefully, complete all as specified and directed by Engr-in-charge.		25	Each