Repairing Work Of Public Toilet At Boudh Wasti ( A )
Tender Value
5.92 Lakhs
Estimated cost
Bid Submission
31 Oct 2020
0 days left
EMD
5929
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
talegaon dabhade → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing Work Of Public Toilet At Boudh Wasti ( A )
BOQ
| Name of work : Repairing work of public toilet at Boudh wasti (A). at Talegaon , Pune for T.D.M.C. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.e-S.S.R. 2019-20 Item no. 46.15 Rate as per attached rate analysis. | 6 | nos | |
| 2 | 2 | Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete. e-S.S.R. 2019-20 Item no. 46.16 Rate as per attached rate analysis. | 6 | nos | |
| 3 | 3 | Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. e-S.S.R. 2019-20 Item no. 46.19 Rate as per attached rate analysis. | 38.1 | sqm | |
| 4 | 4 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means. e-S.S.R. 2019-20 Item no. 21.02 , Rate as per attached rate analysis. | 9 | cum | |
| 5 | 5 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means e-S.S.R. 2019-20 Item no. 21.06 , Rate as per attached rate analysis. | 9 | cum | |
| 6 | 6 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. e-S.S.R. 2019-20 Item no. 21.37 , Rate as per attached rate analysis. \n\n | 1.2 | cum | |
| 7 | 7 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. e-S.S.R. 2019-20 Item no. 21.38 , Rate as per attached rate analysis. \n\n | 1.54 | cum | |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). e-S.S.R. 2019-20 Item no. 24.01 Rate as per attached rate analysis. | 1.54 | cum | |
| 9 | 9 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. e-S.S.R. 2019-20 Item no. 27.01 Rate as per attached rate analysis. | 1.1 | cum | |
| 10 | 10 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. e-S.S.R. 2019-20 Item no. 32.04 Rate as per attached rate analysis. | 1 | sqm | |
| 11 | 11 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. e-S.S.R. 2019-20 Item no. 32.11 Rate as per attached rate analysis. | 2.8 | sqm | |
| 12 | 12 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. e-S.S.R. 2019-20Item no. 32.15 Rate as per attached rate analysis. | 1 | sqm | |
| 13 | 13 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. e-S.S.R. 2011-20 Item no. 33.27 Rate as per attached rate analysis. | 65.07 | sqm | |
| 14 | 14 | Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. e-S.S.R. 2019-20 Item no. 33.67 Rate as per attached rate analysis. | 10.2 | sqm | |
| 15 | 15 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.e-S.S.R. 2019-20 Item no. 35.21 Rate as per attached rate analysis. | 10.2 | sqm | |
| 16 | 16 | Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.complete.e-S.S.R. 2019-20 Item no. 35.25 Rate as per attached rate analysis. | 32.9 | sqm | |
| 17 | 17 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete..e-S.S.R. 2019-20 Item no. 36.12 Rate as per attached rate analysis. | 10.2 | sqm | |
| 18 | 18 | Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. e-S.S.R. 2019-20 Item no. 39.59 Rate as per attached rate analysis. | 9.45 | sqm | |
| 19 | 19 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. e-S.S.R. 2019-20 Item no. 39.68 Rate as per attached rate analysis. | 3.24 | sqm | |
| 20 | 20 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. e-S.S.R. 2019-20 Item no. 42.20 Rate as per attached rate analysis. | 1 | nos | |
| 21 | 21 | Providing,aupplying,fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hour s fire resistance in accordance to ASTME119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets(each0.5mmthickofAA5005/AA3105grade)The aluminium composite panel cladding sheets hall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymerres in (having 70:30 ratio of PVD Fand acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weather silicon sealent,backerrods etc .overall weight of the ACP shall not be less than 7.5 kg/sqm) e-S.S.R. 2019-20 Item no. 51.100 Rate as per attached rate analysis. | 32.9 | sqm | |
| 22 | 22 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. Complete. BD.V 5 page 551 and as directed by Engineer in charge e-S.S.R. 2019-20 Item no. 42.55Rate as per attached rate analysis. | 15 | Rmt | |
| 23 | 23 | Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (BRAND HINDWARE/JOHNSON/PARRYWARE/\nVIENA/ AMERICAN STANDAR iv) (BDV.-30 Page No.616) e-S.S.R. 2019-20 Item no. 41.69 Rate as per attached rate analysis. | 1 | nos | |
| 24 | 24 | Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON047) Including necessary sockets/ union nut etc. Complete. As directed by Engineer in\ncharge e-S.S.R. 2019-20 Item no. 42.83 Rate as per attached rate analysis. | 6 | nos | |
| 25 | 25 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) e-S.S.R. 2019-20 Item no. 40.08 Rate as per attached rate analysis. | 7.2 | sqm | |
| 26 | 26 | Providing and fixing MS powder coated suggesion/complaint box of size 13 inch x 10 inch x 3inch | 1 | nos | |
| 27 | 27 | Painting letters 30cm to 45cm height complete brushes, coir brushers, dusting, cleaning, including cost of paint etc. complete. | 30 | nos | |
| 28 | 28 | Providing and fixing in position signages made from 4 mm thick aluminium composite panel with computer cut lettering of specified height and width, self adhesive vinyl pasted on it to protect from peeling. The panel will be fixed on the door/wall with 12mm SS. stud /SS mirror screw arrangement /3m Tape or suspended from the ceiling by means of SS chain of 8mm dia with anchor fasteners complete as required. All material shall be of approved make. All works complete as per the drawing, specification and direction of the Engineer Size- 300mm x 150mm | 4 | nos | |
| 29 | 29 | Supplying and erecting fresh air cum exhaust fan of light duty250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner. | 6 | nos | |
| 30 | 30 | Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary (including excavation and laying) e-S.S.R. 2019-20 Item no. 42.18 Rate as per attached rate analysis. | 1 | nos | |
| 31 | 31 | Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreous china water Closet inuding 6litre capacity white vitreous china flushing Cistern with raised soft-push button,white vitreous china wash basin of size46x36cm and one no SS304 hinge drail 76 cms & threen oSS 304 of (GrabBar) 60cm sall including cutting and making good the wall sand floors wherever required,seat cover,cistern&wash basin fittings,nuts,bolts and gasket etc complete of make Hindware(Matrixseries70002)/Cera or equivalent as per the direction of Engineer-In-charge. e-S.S.R. 2019-20 Item no. 51.63 Rate as per attached rate analysis. | 1 | nos | |
| 32 | 32 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres e-S.S.R. 2019-20 Item no. 42.54 Rate as per attached rate analysis. | 1000 | ltr | |
| 33 | 33 | Providing and fixing orissa type colour glazed earthenware 625x450mm. w.c. pan including trap,C.I.soil and vent pipe upto the outside face of wall including 100 mm.dia.C.I.plug,bend,15mm.thick 10 litre PVC flushing cistern with all necessary pipe connection etc.complete. e-S.S.R. 2019-20 Item no. 42.35 Rate as per attached rate analysis. | 5 | nos | |
| 34 | 34 | Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. e-S.S.R. 2019-20 Item no. 33.48 Rate as per attached rate analysis. | 4.46 | sqm | |
| 35 | 35 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. Complete.(Bd.V.5 Page No.551)e-S.S.R. 2019-20 Item no. 42.57 Rate as per attached rate analysis. | 8 | rmt | |
| 36 | 36 | Supplying and erecting Polypropylene double flange NRV of size 32 mm dia complete including all As directed by Engineer in charge | 1 | nos | |
| 37 | 37 | Providing and fixing Supreme make Amrutam Under ground water tank of 1000 litre capacity including all necessary fittings and plastic cover.As directed by Engineer in charge. | 1000 | Ltr | |
| 38 | 38 | Royalty charges | 0.11 | cum | |
| 39 | 39 | Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. | 25 | rmt | |
| 40 | 40 | Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S copper PVC insulated wirelaid in provided conduit/trunking /inside pole/Bus bars or any other places. As per specification No: WG-MA/BW | 25 | rmt | |
| 41 | 41 | Supplying & erecting mains with 2x2.5 sq.mm F.R.L.S copper PVC insulated wirelaid in provided conduit/trunking /inside pole/Bus bars or any other places. As per specification No: WG-MA/BW | 25 | rmt | |
| 42 | 42 | Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete. | 9 | nos | |
| 43 | 43 | Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete. | 9 | nos | |
| 44 | 44 | Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement morter / POP as per required to match the background in an approved manner. | 9 | nos | |
| 45 | 45 | Point wiring for light/fan/bell concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm. (2+1E) FR grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/CW | 19 | nos | |
| 46 | 46 | Supplying and erecting LED square / circular 5 to 8W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete. | 9 | nos | |
| 47 | 47 | Supplying and erecting corridor/Passage light fitting (2 feet) including 18W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board. | 1 | nos | |
| 48 | 48 | Supplying and erecting 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having discharge 35 / 270L.P.M., head 30 / 15 m & pipe of Suction 32 mm/Delivery 25 mm diameter erected with with necessary H type clamps as per specification no. WP-OSP | 1 | nos | |
| 49 | 49 | Supplying and erecting D. O. L. Starter suitable for 250V. singlephase, 50 cycles with overload element with necessary materials and connected to supply upto 3 H.P. | 1 | nos | |
| 50 | 50 | Supplying & erecting Water lavel controller 230/ 415V AC., Four way for under ground & Over head tank operation. | 1 | nos | |
| 51 | 51 | Supplying & erecting gun metal gate valve of size 25 mm dia\ncomplete as per specification no. FF-VL/GV | 1 | nos |
AI Tender Summary
Tender Timeline
Oct 15, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender