| 1 | 1 | Package I – Laying raw water pumping main, erection of pumpsets,construction of 8mld Water Treatment Plant, service roads, providing Scada & Automation, 315KVA transformer and renovation of existing structures at plant site at Illithodu. | BI01010001010000000000000515BI0100001112 | | |
|---|
| 2 | 1.01 | Raw water pumping main - Supplying 400mm dia.DI K9 Pipe conforming to IS 8329/2000 - 100m, 100mm dia DI K9 pipe - 10m, 100 mm CI double flanged sluice valve with cap, PN 1.6 - 1 no., including all specials like valves, reducers, tail pieces, bends, tees, DI/MJ collar, etc. complete required for the satisfactory completion of the work as per the direction Engineer in Charge and scope of work , including conveying, laying, cutting (using cutters), jointing (push on/flanged joints), testing, commissioning the pumping main (DI pipe/valves and specials) according to the alignment including all cost of pipes and specials, including excavating trenches for pipe laying and refilling the trenches , labour for cutting DI pipe steel saw, providing anchor blocks/guide blocks wherever necessary using cement concrete mix 1:2:4,construction of flow meter chambers and valve chambers of suitable size with cement concrete CC 1:3:6 and RCC 1:1.5:3 (for cover slab), R CC 1:2:4 for base slab,side wall, including centering, shuttering, strutting, propping and cost of reinforcement bars of TMT grade Fe-500D or more for RCC works, p lastering 12mm thick with cement mortar 1:4 etc. complete in Vol.II of NIT. Inter connection work for 400mm D I K9 pipe incuding all cost and conveyance specials and materials ,supplying and fixing mechanical flow meter(volt man type ) for 150mm DI CWPM at Illithodu plant and/electro magnetic flow meter 250mm and 300mm for DI CWPM at Illithodu plant with necessary special and materials etc. complete required for the satis factory completion of the work as per the direction of departmental officers in charge and scope of work. in NIT Vol. II. | BI01010001010000000000000515BI0100001113 | 1 | JOB |
|---|
| 3 | 1.02 | Design,supply,erection,testiing and commissioning of Raw water and Clear water pumpsets at Illihodu WTP - Design ,Supply, erection, testing and commissioning of centrifugal submersible pumpset having a discharge of 85 lps against an approximate total head of 29m - 2nos (1 as standbye) and VT pump set having a discharge of 36 lps against an approximate total head of 78m - 2nos (1 as standbye) , and VT pump set having a discharge of 48 lps against an approximate total head of 87m - 2nos (1 as standbye), and VT pump set having a discharge of 7 lps against an approximate total head of 112m - 2nos (1 as standbye) and all allied work like with required length of suction pipe, starter, panel board, cabling works, earthing, capacitors for PF above .95, foot valves, NRV ,sluice valve , suction, delivery pipe connections, earthing and all necessary accessories including power allocation charges, requied RCC works for providing anchor block in bend portion, foundation block etc including formwork,watering, curing etc, with warranty of 2year etc. complete as per direction of departmental officers in charge and scope of works in NIT Vol.II. | BI01010001010000000000000515BI0100001114 | 1 | JOB |
|---|
| 4 | 1.03 | Design, construction, testing and commissioning of 8MLD capacity Water Treatment Plant with SCADA automation, - Construction of 8 MLD conventional type WTP at Illithodu . The work includes design after necessary soil investigation, construction and commissioning of SCADA operated 8.00 MLD WTP with all associated structures like Aerator, Flash mixer, Clarifloculator, rapid sand gravity filter with filter house, wash water tank, chemical house, Chlorine room with Chlorinator andf chlorine tonners,clear water sump, clear water pump house cum panel board room ,compressor room with compressors, supplying and erection of all mechanical and electrical equipments ,supply and installation of Electromagnetic flowmeter, supply and erection of satinless steel metal box for housing the transmitter and battery of Eelctromagnetic flow meter,Supply, erection, testing, commissioning of pressure filter of capacity 23 lps made of mild steel with dia-2400mm. Height( HOS)- 2000mm using MS plate Dishes,dish end thickness 12mm,shell of thickness 10mm adequate to with stand possible maximum internal pressure etc. complete in all respect and including cost of materials as per the direction of officer incharge and scope of work in NIT Vol.II. The WTP should have a well-equipped lab with all necessary lab equipments. The necessary safety equipments and hoisting system for chemicals and lightening arrester, ladders to wash water tank and sump should be supplied as part of the work. All internal electrical and plumbing work . Common RCC wash water pit has to be constructed in the WTP compound and the drainage water from the slurry pit should be disposed to the nearby drainage facility. The site should be levelled and easy access to all the major components of the WTP should be ensured by building internal access by bituminous road , providing and laying RCC of mix M30/richer mixer (for water retaining structures) and mix 1:2:4, including centering, shuttering, strutting, propping, plastering finished with a floating coat of mix 1:3 with water proofing compound, finishing walls with two or more coats of water proofing cement paint of required shade/texture including priming coat interior/exterior, using steel reinforcement of TMT grade Fe-500D or more etc. complete. Providing steel work welded in built up sctions/framed work for ladders and handrails, providing vent hole supplying and fixing manholes of required size, filling water for testing, lettering with black japan paint etc complete as per scope of work in NIT Vol.II. supplying and fixing mechanical water level indicator, providing and fixing lightning protection system,construction of compound wall and construction of drain , fabricating and fixing MS mechanical joint with flanged tail pieces using MS plate of required thickness including cost and conveyance of materials etc. complete as per scope of work. Construction of valve chambers/ flow meter chambers of suitable size where ever necessary for the satisfactory completion of the work as per the directions of Departmental officers in charge and scope of work in NIT Vol.II . This work includes operation and Maintenance of 8mld water treatment plant at Illithodu for 2 year after the commissioning of the scheme including all labourcharges for operating, cost of chemicals and all consumables etc. | BI01010001010000000000000515BI0100001115 | 1 | JOB |
|---|
| 5 | 1.04 | Construction Of Service Road Inside Illithodu WTP- Constuction of service road in WTP compound including excavation in cutting soil ,construction of granular sub base by providing local materials,providing , laying , spreading and compacting graded stone aggregate to wet mix macadam, prime coat - Low density - with packed bitumen ,tack coat with packed bitumen ,20mm thick open graded premix carpet using bituminous binder - bitumen S65 Packed bitumen ,seal coat - manual means - Type C bitumen S65 Packed bitumen with all cost of materials etc. complete required for the satisfactory completion of the work as per the direction of the departmental officers in charge and scope of work in NIT Vol.II. | BI01010001010000000000000515BI0100001116 | 1 | JOB |
|---|
| 6 | 1.05 | Supply, Errection, Testing and Commissioning of 315 KVA Transformer and allied works at plant site Illithodu-Supply, erection,testing and commissioning of 1No 315 KVA 11KV/433V outdoor copper wound oil filled transformer (KEL/TELK/BHEL make) with all accessories as per officer in charge and scope of work in NIT Vol.II ,including construction of suitable R.R masonry,Supply and providing MS ladder type cable try and supports ,Fabrication, supply and erection of 11 KV 6 pole structure . Fabrication, supply and erection of fencing for transformer yard ,Supply and fixing of 2 m x 1.8m size gate,Supply , erection, testing and commissioning of outdoor, oil filled CTPT unit with bushing as per KSEB standard,Supply, erection , testing , commissioning of -/5A, class 0.2S, 4 wire HT TOD meter ,Supply and providing plate earthing ,Providing masonry earth pit chambers ,Filling charcoal and salt at alternate intervals etc complete, ,painting Identification marks letters etc.in panel boards, DB transformer etc.as per electrical inspectorate standards.,Supplying and fixing cable route marker,Supply and providing safety items as per NIT Vol. II,Charges for preparation of electrical scheme and getting energisation approval (including clearing defects if any) from electrical inspectorate.Fabrication of fully partitioned in door self standing cubical type dust and vermin proof enclosure for panel assembly asper 4 of IS 8623-7set as per specification of NIT Vol.II,Supplying and laying of copper earthing conducters along with cable/,Supplying and laying of 6 SWG&8SWG copper wire conductor etc are required ,Supply,Transportation ,erection testing and commissioning of MSB ,SSB ,MCC ,LDB s, Supplying and wiring points according to IS 732 ,Supplying and fixing yard lighting with GI pole and LED light,Supplying and laying size of 1.1KV PVC insulated and armoured heavy duty aluminium cable as per NIT Vol.II, Supplying and wiring points according to IS 732 for single control celing fan and light , Supplying and laying one number PVC insulated and PVC sheeted / XLPE/ power cable of 1.1 KV grade,Supplying and laying 1.1 KV grade PVC insulated armored heavy duty aluminium cable ,Supply,conveyance,installation,testing and commissioning of 1200 mm sweep-5 star rated ceiling fan using standard accessories as per NIT Vol.II,Supplying and laying one number PVC insulated and PVC sheeted / XLPE/ power cable of 1.1 KV grade ,supply laying testing and commissioning of the following size.PVC XLPE insulated shelthed armoured aluminium conductor cable .Supply and installation of sheet steel phosphatised and painted dust and vermin prof enclosure of MCB DB 8 way ,supply and wiring light points with 6A plate ceiling of according to various 732- 1989 etc. complete as per specifications in Vol.II of NIT. Supply, conveyance and installation testing and commissioning the light fittings as required,Earth work in excavation ,Providing and laying in position cement concrete 1:3:6 &1:2:4 ,Centering and shuttering including strutting, etc. steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth leve lThermo - Mechanically Treated bars of grade Fe-500D or more, 12 mm cement plaster of mix:1:4 etc .complete as per the direction of Engineer in charge and NIT.Vol.II. | BI01010001010000000000000515BI0100001117 | 1 | JOB |
|---|
| 7 | 1.06 | Renovation of existing structures at Illithodu- Renovation of existing structures including clearing jungle, uprootting of trunk vegitation,grass etc. felling trees,demolishing dismantling and disposing R.C.C work,brick work,CC work,Stone rubble masonary work etc., repairing the existing plasters of thickness 12mm to 20mm in CM 1:4, Providing & fixing fly proof wire gauze to windows, clerestory windows & doors ,Renewing glass panes and re fixing existing wooden fillets,Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster,Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,architrave, holdfasts etc. complete ,Supplying and fixing rolling shutters of approved make as per NIT Vol II specification,Wall painting with plastic emulsion paint of approved brandPainting with synthetic enamel paint of approved brandwherever necessary as per the direction of departmental officer in charge ,Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.,Supplying, conveying and fixing of 1 tonne capacity moving crane in the existing raw water pump houseat Illithodu,randum rubble masonry with hard stone using cm 1:6 including levelling up with cement concrete 1:6:12 wherever necessary,Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ,12 mm cement plaster of mix:1:4 ,Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete,Painting with synthetic enamel paint of approved brand and manufacture to give an even shade,two ormore coats on new work wherever necessary as per the direction of departmental officer in charge,dismantling C.I pipes including excavation and refilling trenches after taking out the pipe as per NIT Vol.II Supplying ,conveying, laying ,cutting,jointing,testing and commisioning of 300mmdia CI Class LA spun pipe including earth work,labour and supply of lead wool. etc. complete as per the direction of the departmental officers in charge and scope of work in NIT Vol.II. | BI01010001010000000000000515BI0100001118 | 1 | JOB |
|---|
| 8 | 1.07 | Two Years Maintanance After Commissioning- Operation and Maintenance of 8mld water treatment plant at Illithodu for 2 year maintenance after the commissioning of the scheme including all labourcharges for operating, cost of chemicals and all consumables etc. complete as per scope of work in NIT Vol.II | BI01010001010000000000000515BI0100001119 | 1 | JOB |
|---|
| 9 | 1.08 | Installation of CCTV in WTP compound- - Supplying, installing, testing and commissioning of 2MP Full HD ir Bullet Camera -7nos 30m range, 8 channel NVR-2 SATA, Hard disc 2 TB, 8 port PoE Switch, Network UTP cable, PVC Conduit 6U Rack, 1kwa UPS LI etc. complete as per the direction of the departmental officers in charge and scope of work in NIT Vol.II. | BI01010001010000000000000515BI0100001120 | 1 | JOB |
|---|
