Repairs And Maint Of External Water Supply At Likabali Mil Stn Under Ge 872 Ews ( 8828/E8 )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Oct 2020
0 days left
EMD
22000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
LIKABALI → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs And Maint Of External Water Supply At Likabali Mil Stn Under Ge 872 Ews ( 8828 / E8 )
BOQ
| NAME OF WORK : REPAIRS & MAINT OF EXTERNAL WATER SUPPLY AT LIKABALI MIL STN UNDER GE 872 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | UNITS | |
| 1 | 1 | REPAIRS/MAINT TO EXTERNAL WATER SUPPLY | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and Laying of Pipes, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001114 | 199 | CUBIC METRE |
| 3 | 1.02 | Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the Pipe Line with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed. | BI01010001010000000000000515BI0100001115 | 199 | CUBIC METRE |
| 4 | 1.03 | Taking up or down Steel Tubing 25mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001116 | 601 | RUNNING METRE |
| 5 | 1.04 | Taking up or down Steel Tubing 40mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001117 | 180 | RUNNING METRE |
| 6 | 1.05 | Taking up or down Steel Tubing 50mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001118 | 150 | RUNNING METRE |
| 7 | 1.06 | Taking up or down Steel Tubing 80mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001119 | 70 | RUNNING METRE |
| 8 | 1.07 | Taking up or down Steel Tubing 100mm bore (dia) and Connections/ Fittings of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001120 | 60 | RUNNING METRE |
| 9 | 1.08 | Supply & laying Galvanised Steel Tubing 80mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed. | BI01010001010000000000000515BI0100001121 | 30 | RUNNING METRE |
| 10 | 1.09 | Supply & laying Galvanised Steel Tubing 100mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, laid in Trenches, complete all as specified and as directed. | BI01010001010000000000000515BI0100001122 | 18 | RUNNING METRE |
| 11 | 1.1 | Supply & laying Ductile Iron Pipe 100mm bore (dia), Spigot & Socketed, Type K-9 including all Specials/ Fittings and jointed, laid in Trenches and Testing after laid, complete as all specified and as directed. | BI01010001010000000000000515BI0100001123 | 30 | RUNNING METRE |
| 12 | 1.11 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 25mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001124 | 200 | RUNNING METRE |
| 13 | 1.12 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 32mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001125 | 401 | RUNNING METRE |
| 14 | 1.13 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 50mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001126 | 180 | RUNNING METRE |
| 15 | 1.14 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 63mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001127 | 150 | RUNNING METRE |
| 16 | 1.15 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 90mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001128 | 40 | RUNNING METRE |
| 17 | 1.16 | Supply & Laying PP-R (Polypropylene Random Copolymer) 3 layer Pipe SDR 7.4 (PN 16) and Fittings 110mm bore (dia) having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Ground and Testing of Joints as per Manufactures instruction, complete all as specified and as directed. | BI01010001010000000000000515BI0100001129 | 30 | RUNNING METRE |
| 18 | 1.17 | S&F Bib Tap 15mm bore (dia), Plug type suitable for GI Pipe, Cast Copper alloy with Crutch and Butter-fly Handle, screwed for Iron Pipe including Taking down/out Unserviceable Bib Tap, complete all as specified and as directed. | BI01010001010000000000000515BI0100001130 | 3 | EACH |
| 19 | 1.18 | S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001131 | 20 | EACH |
| 20 | 1.19 | S&F PP-R (Polypropylene Random Copolymer) Gate Valve 32mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001132 | 10 | EACH |
| 21 | 1.2 | S&F PP-R (Polypropylene Random Copolymer) Gate Valve 50mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001133 | 2 | EACH |
| 22 | 1.21 | S&F PP-R (Polypropylene Random Copolymer) Gate Valve 63mm bore (dia), Brass insert with Wheel Head, screwed both Ends including Taking down/ out Unserviceable Gate Valve of any description, complete all as specified and as directed. | BI01010001010000000000000515BI0100001134 | 3 | EACH |
| 23 | 1.22 | M&L Cast Iron Butter-fly Valve 80mm bore (dia), Operation Cap, both Sides Flanged, ISI Marked (IS:13095 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/down Unserviceable Butter-fly Valve, complete all as specified and as directed. | BI01010001010000000000000515BI0100001135 | 3 | EACH |
| 24 | 1.23 | M&L Cast Iron Non-Rising Sluice Valve 80mm bore (dia), both Ends Flanged, ISI marked and conforming to IS:14846-2000, Class PN-1.6 including Taking out/ down Unserviceable Non-Rising Sluice Valve, complete all as specified and as directed. | BI01010001010000000000000515BI0100001136 | 3 | EACH |
| 25 | 1.24 | M&L Cast Iron Sluice Valve 80mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed. | BI01010001010000000000000515BI0100001137 | 5 | EACH |
| 26 | 1.25 | M&L Cast Iron Sluice Valve 100mm bore (dia), Operation-cap, both sides Flanged, ISI Marked (IS:14846-2000 & Class PN 1.6) having Cast Iron Hand Wheel, Brass Spindle, Cheek Nuts and Sliding Gate and Body with Mild Steel Bolts & Nuts and Testing against Leakage including Taking out/ down Unserviceable Sluice Valve, complete all as specified and as directed. | BI01010001010000000000000515BI0100001138 | 5 | EACH |
| 27 | 1.26 | M&L Construction Brick Masonry Valve Chamber of Size 60x60x60 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 2.0mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed. | BI01010001010000000000000515BI0100001139 | 3 | EACH JOB |
| 28 | 1.27 | M&L Construction Brick Masonry Valve Chamber of Size 100x100x100 Cm (Internal Dimension of Chamber) with Cement Concrete 1:4:8 (40mm graded stone aggregate) 100mm thick in Foundation, One Brick thick Brick Walls in Cement Mortar 1:4, Rendering 15mm thick on Brick Walls in Cement Mortar 1:4 and all Internal Surfaces except PCC Foundation Bed, Externally upto 150mm below Normal Ground Level, providing Mild Steel Valve Chamber Cover 2.0mm thick with Hinges, Handle and Locking Arrangements with Mild Steel Angle Iron Frame 40x40x5.0mm on Top of Valve Chamber, Angle Iron Frame embedded in Cement Concrete 1:2:4 (20mm graded stone aggregate) 100mm thick including applying Two Coats of Black Synthetic Enamel Paint over a coat of Red Oxide Zinc Chrome Primer after necessary preparation to all Steel Surfaces Painting, all necessary Earth Work i.e. Excavation in any type of Soil, Returning, Filling in and Removal of Surplus Soil to a distance not exc. 50.00 Metre including Demolition of Damaged Valve Chamber, complete all as specified and as directed. | BI01010001010000000000000515BI0100001140 | 2 | EACH JOB |
| 29 | 1.28 | M&L Preparing & Removing Rusts, etc. from Surfaces of Pressed Steel Storage Water Tank 10000 GALLON Capacity of 20.00 Metre High Steel Stagging by Rubbing with Wire Brush and Complete Cleaning, Applying Two Coats of Aluminium Paint on Outer Area of Tank and Steel Stagging of Pressed Steel Storage Water Tank and applying One Coat of Black Bituminous Paint (suitable for Drinking Water purpose) to Inside Walls of Storage Water Tank and all Connected Assesories like all GI Pipes, Valves, Other Fittings, etc., complete all as specified and as directed.\nNOTE : Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Sump will be arranged by the Contractor at his Own Arrangement & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account. | BI01010001010000000000000515BI0100001141 | 3 | EACH JOB |
| 30 | 1.29 | M&L Dewatering Water from Pressed Steel Storage Water Tank 10000 GALLON capacity, having 20.00 METRE High Steel Stagging, Cleaning and Removing all Mosses, Algae, Dirts, etc. from the Walls and Floor of Water Tank, Removal of Dirty Water with Sludges and disposed off from the Site as diredted, Rubbing Walls, Floor, Ceilling surfaces with Gunny Bag after sprinkling of Bleaching Powder Solution and Wash thoroughly with Fresh Water including Cleaning of Outlet Pipes, Stop Valves, Gate Valves by Taking out Pipe Lines with Stop Valves, Gate Valves, etc. and all Accessories, Re-fixing the same after Cleaning including Float Valve with Float Arm to Original Position, Writing Letters \"TANK CLEANED ON : DD.MM.YYYY\" (i.e. Date of Cleaning), exc. 100mm but not exc. 200mm in height and 15mm in wide with White Paint on Black Back ground on the Front/ Road Side/Face of the Tank, complete all as specified and as directed.\nNOTE : Materials viz Bamboos, Coconut String, Munj or other Equipments as required for construction of Temporary Structure on Outside of Steel Storage Water Tank will be arranged by the Contractor at his Own Arrange-ment & Cost and the same will be include in the Quoted Unit Rate. No Extra Amount shall be Paid separately on this account. | BI01010001010000000000000515BI0100001142 | 12 | EACH JOB |
| 31 | 2 | REPAIRS/MAINT TO PUMPS & MOTORS | BI01010001010000000000000515BI0100001143 | ||
| 32 | 2.01 | M&L Lifting of Submersible Pump & Motor Assembly 12.5 HP capacity alongwith complete Column Pipes, Submersible Cable, Safety Rope, etc. from the existing Borewell by employing Chain Pulley Block, etc., Dismantling Column Pipes by Opening Nuts, Bolts, Pump & Motor, etc, Segregating & Stacking of Serviceable Column Pipes & Other Materials and Keep in Safe Custody for re-use, complete all as specified and as directed. | BI01010001010000000000000515BI0100001144 | 3 | EACH JOB |
| 33 | 2.02 | M&L Removing Submersible Pump & Motor Assembly 12.5 HP capacity to AGE E/M Store Yard at LIKABALI, Opening/Dismantling & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair Works involves, Cleaning of Cover and Parts as required, Transporting defective Submersible Pump & Motor Assembly to nearest Workshop for Repairs, Repairing & Replacing of Unserviceable Parts, Reassembling Submersible Pump Motor Assembly after repaired, Transporting repaired Submersible Pump Motor Assembly back to Work Site, complete all as specified and as directed.\nNOTE :- \n(a) Spare Parts required to be replace will be Measured and Paid as \"Supply only\" under relevant Items. Cost of Labour Element involved for replacement of Parts will deem to include in the Quoted Unit Rate.\n(b) Any Minor repairs involved to make the Submersible Pump & Motor Assembly Functional, even if not notified by the Board of Officers, the same will be carry out by the Contractor without any Extra Cost to the Department.\n(c) The Cost of Minor Spares Parts/Items viz Nuts, Bolts, Washers, Gasket, etc. will deem to be include in the Quoted Unit Rate.\n(d) Rewinding of Submersible Motor, wherever invloves will be Measured and Paid separately under relevant Item. | BI01010001010000000000000515BI0100001145 | 3 | EACH JOB |
| 34 | 2.03 | M&L Dismantling Submersible Pump & Motor 12.5 HP capacity, Taking out burnt Windings, Cleaning of Slots of the Motor and Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the Same and Testing for Smooth Functioning after Rewinding, complete all as specified and as directed. | BI01010001010000000000000515BI0100001146 | 3 | EACH JOB |
| 35 | 2.04 | Supply only Bush for Impellers, 'C' type, Part No. 1091 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001147 | 3 | EACH |
| 36 | 2.05 | Supply only Gun Metal Bush for Intermediate, Part No. 933.1 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001148 | 6 | EACH |
| 37 | 2.06 | Supply only Gun Metal Bush (Upper Part No. 1175, Lower Part No. 1176) (as per existing/ as approved) suitable for Submersible Motor 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001149 | 3 | EACH |
| 38 | 2.07 | Supply only Gun Metal Impellers, Part No. 151 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001150 | 3 | EACH |
| 39 | 2.08 | Supply only Shaft made out of Stainless Steel having Standard size Complete Part No. 180 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001151 | 3 | EACH |
| 40 | 2.09 | Supply only Sleeve made out of Stainless Steel for Impeller, Part No. 2004 (as per existing/ as approved) suitable for Submersible Pump 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001152 | 3 | EACH |
| 41 | 2.1 | Supply only Thurst Bearing for Part No. 1225 (as per existing/ as approved) suitable for Submersible Motor 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001153 | 3 | EACH |
| 42 | 2.11 | Supply only Galvanised Iron Steel Pipe 65mm bore (dia), 3.0 Metre in Length as Column Pipe, ISI marked, having both Sides Painted, threaded both Ends including Socket duly screwed, complete all as specified and as directed. | BI01010001010000000000000515BI0100001154 | 8 | EACH LENGTH |
| 43 | 2.12 | Supply only PVC insulated, sheathed Stranded Copper Conductor Water Proof Cable, Flat, Cross-sectional Area 6.0 Sqmm, 3 Core, 1100 Volt grade, conforming to IS:694 for suitable for Sumbersible Pump & Motor Assembly 12.5 HP capacity, complete all as specified and as directed. | BI01010001010000000000000515BI0100001155 | 95 | RUNNING METRE |
| 44 | 2.13 | M&L Lowering down Submersible Pump & Motor Assembly 12.5 HP capacity (after Repaired & Testing of Functionability) alongwith Column Pipes of any Size and Length, Submersible Cable, Steel Wire Rope, etc. with the help of Chain Pulley Block and Tool & Plants, Testing on Completion, complete all as specified and as directed.\nNOTE : Serviceable Column Pipes and Other Materials, etc. (obtained from Item No. 30 here-in-before) shall be reused. Unserviceable Column Pipes & Sumbersible Cable shall be replaced with New Pipes & Cable respectively and the same will be Measured and Paid separately under appropriate Items as 'Supply only'. | BI01010001010000000000000515BI0100001156 | 3 | EACH JOB |
| 45 | 2.14 | M&L Taking out existing Monoblock Pump Set 10 HP capacity for Minor Repairs, Replacement of rusted Bolts, Nut, Washers with New One of existing Size, Greasing Pump Set for Smooth Functioning and Reinstalled the Pump in the same Position after repaired, complete all as specified and as directed. | BI01010001010000000000000515BI0100001157 | 3 | EACH JOB |
| 46 | 2.15 | M&L Opening Strip of Monoblock Pump Set 10 HP capacity, Removing Mono-block Pump Set to AGE E/M Store Yard at LIKABALI, Opening & Checking in presence of a Board of Officers to ascertain the quantum of Defects and Repair works involves, Cleaning of Pump Set as required, Transporting defective Pump Set to nearest Workshop to carry out Repairing/Rewinding, Dismantling Pump Set, Taking out burnt Copper Windings, Cleaning of Slots of the Motor, Rewinding the same with Super Enamalled Copper insulated Wire of suitable Gauge and Weight as per existing including necessary Insulation Materials, Varnishing, Heating, Reassembling the same and Testing for Smooth Fucntioning after Rewinding, Transporting Back to Worksite after Repaired, Reinstallation and providing all Connection, Testing in presence of JE/Engineer-in-Charge, complete all as specified and as directed. | BI01010001010000000000000515BI0100001158 | 3 | EACH JOB |
| 47 | 2.16 | S&F Pressure Gauge Diaphram type Range 0-7 Kg/Sq Cm including Taking out/ down Unserviceable Pressure Gauge, complete all as specified and as directed. | BI01010001010000000000000515BI0100001159 | 2 | EACH |
| 48 | 2.17 | S&F Deluxe Automatic Star Delta Starter suitable for 12.5 HP Motor (as per existing as approved), fixing to Existing Panel Board with necessary Fixing Arrangements and providing all Electric Connections including Taking down/out Unserviceable Star Delta Starter from Panel Board, complete all as specified and as directed. | BI01010001010000000000000515BI0100001160 | 3 | EACH |
AI Tender Summary
Tender Timeline
Oct 13, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 26, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender