( Retender ) Tvm Dp- 2020-21 - Pro No . 947- Supply And Installation Of Equipments For Modern Slaughter House In Karavaram Please Refer Tender Documents
Tender Overview
Project Description
( Retender ) Tvm Dp- 2020-21 - Pro No . 947- Supply And Installation Of Equipments For Modern Slaughter House In Karavaram Please Refer Tender Documents , Electrification , 90 . 2 . 1 . 7 : Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988 , Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1 . 00 Sq Mm Frls Pvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade , Including Providing Switch Board Main And Continuous Earthing With No . 14 Swg Bare Copper , Required Quantity Of Copper Earth Socket , Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes , Modular Type Front Plates ( White ) Etc . Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall , Colour Washing Etc . Complete . All The Terminations In The Switch Boards And Dbs Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties , Tie Mounts Etc As Required . ( Rohs Compliant Modular Accessories ) . Independent Plug - Short Point , 90 . 2 . 1 . 3 : Supply And Wiring Points According To Is 732-1989 Using Rigid Pvc Conduit Of Minimum Size 20 Mm With Specials Conforming To Is 9537 Part Iii 1983 And With Suitable Size Specials Conforming To Is 3419-1988 , Fixing The Conduit Using Metal Saddles Spacing Not Exceeding 50 Cm Or Concealed Suitably And With 1 . 00 Sq Mm Frls Pvc Insulated Stranded Single Core Copper Conductor Cable 650V Grade , Including Providing Switch Board Main And Continuous Earthing With No . 14 Swg Bare Copper , Required Quantity Of Copper Earth Socket , Brass Bolt And Nut Crimping/ Soldering Etc Complete With Suitable Size Modular Type Metal Switch Boxes , Modular Type Front Plates ( White ) Etc . Up To And Including 6A Modular Type Sp Switches And Making Good The Surface Of Wall , Colour Washing Etc . Complete . All The Terminations In The Switch Boards And Dbs Shall Be Tinned And The Wires Shall Be Drawn And Fixed Along The Periphery Of The Box Using Suitable Ties , Tie Mounts Etc As Required . ( Rohs Compliant Modular Accessories ) . , 1 . 32 : Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess , Including Providing And Fixing 6 Pin 5/6 & 15/16 Amps Modular Socket Outlet And 15/16 Amps Modular Switch , Connection Etc . As Required . , 90 . 3 . 18 . 2 : Supply , Fabrication , Conveyance And Fixing The Following Sizes Of B Class Gi Pipe Bent To Shape / Cut And Welded To Shape And Fixing The Same To Wall / Parapet Using Clamps As Noted Along With Each Size , Painting With 2 Coats Of Synthetic Enamel Paint Over A Coat Of Zinc Chromate Primer , Making Good The Damages , Colour Washing Etc As Required . , 90 . 15 . 4 . 2 : Supply Conveyance , Installation , Testing And Commissioning Of 36/40W Led Street Light Output Greater Than 105Lumen/W 4000-6000 K With Ip 66 Protection Led Chip Make Cree/Lumilled/Nichea With Power Factor Greater Than 0 . 95 At Full Load , Internal Surge Protection Up To 8 Kv , And Aluminium Pressure Die-Cast Powder Coated Housing , Acrylic Cover Complete With Thd Less Than 10% , Power Factor Greater Than 0 . 98 , Rohs Compliant , Duly Wired Up For Use On 230 V Ac Supply . Driver Compartment Should Be Seperatly Accessible For Maintenance ( Lm 79&80 Certificates From Nabl Accredited Third Party Lab To Be Produced Mentioning Chip Manufacturer ) , 90 . 15 . 4 . 11 : Supply Conveyance , Installation , Testing And Commissioning Of 200W Led Flood Light Output Greater Than 105Lumen/W 4000-6000 K With Ip 66 Protection Led Chip Make Cree/Lumilled/Nichea With Power Factor Greater Than 0 . 95 At Full Load , Internal Surge Protection Up To 8 Kv , And Aluminium Pressure Die-Cast Powder Coated Housing , Acrylic Cover Complete With Thd Less Than 10% , Power Factor Greater Than 0 . 98 , Rohs Compliant , Duly Wired Up For Use On 230 V Ac Supply . Driver Compartment Should Be Seperatly Accessible For Maintenance ( Lm 79&80 Certificates From Nabl Accredited Third Party Lab To Be Produced Mentioning Chip Manufacturer ) , 2 . 10 . 1 : Supplying And Fixing 5 Amps To 32 Amps Rating , 240/415 Volts , C Curve , Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections , Testing And Commissioning Etc . As Required . Single Pole , 2 . 10 . 4 : Supplying And Fixing 5 Amps To 32 Amps Rating , 240/415 Volts , C Curve , Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections , Testing And Commissioning Etc . As Required . Triple Pole , 2 . 13 . 2 : Supplying And Fixing Following Rating , Four Pole , 415 Volts , Isolator In The Existing Mcb Db Complete With Connections , Testing And Commissioning Etc . As Required . 63 Amps , 2 . 13 . 3 : Supplying And Fixing Following Rating , Four Pole , 415 Volts , Isolator In The Existing Mcb Db Complete With Connections , Testing And Commissioning Etc . As Required . 100 Amps , 2 . 15 . 2 : Supplying And Fixing Following Rating , Four Pole , ( Three Phase And Neutral ) , 415 Volts , Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current Upto 300 Milliamperes In The Existing Mcb Db Complete With Connections , Testing And Commissioning Etc . As Required . 40 Amps , 2 . 2 . 14 : Providing And Fixing Following Rating And Breaking Capacity And Pole Mccb In Existing Cubicle Panel Board Including Drilling Holes In Cubicle Panel , Making Connections , Etc . As Required . 125 Amp , 36 Ka , Od848835/2020_2021 : Supply And Installation Of Switch Gear Units In Sheet Steel Enclosure Complete With Handle Assembly , Door Interlock And Pad Locking Arrangement Of The Following Ratings On Existing Angle Iron Frame Work Or Directly On Wall Using Necessary Bolts &Amp; Nuts , Fixing The Unit To Wall , Making Good The Damages , Colour Washing Etc . Including Giving Necessary Connections As Required . ≪Br≫125A , 415V , 50Hz , Ac23 A Duty , 4 Pole On Load Changeover Switch Disconnector , 90 . 11 . 1 . 11 : Supply And Installation Of Sheet Steel , Phosphatised And Painted , Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar , Neutral Link , Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc . Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages , Colour Washing Etc . As Required , 90 . 11 . 1 . 12 : Supply And Installation Of Sheet Steel , Phosphatised And Painted , Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar , Neutral Link , Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc . Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages , Colour Washing Etc . As Required , 90 . 11 . 1 . 19 : Supply And Installation Of Sheet Steel , Phosphatised And Painted , Dust And Vermin Proof Enclosure Of Mcb Db Including Copper /Brass Bus Bar , Neutral Link , Earth Bus And Din Rail Suitable For Fixing Mcb/ Isolator Etc . Fixed On Wall Using Suitable Anchor Bolts Or Fixed In Recess Including Cutting Hole On The Wall , Making Good The Damages , Colour Washing Etc . As Required , 1 . 21 . 1 : Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required . 20 Mm , 1 . 21 . 2 : Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/ Recess Including Cutting The Wall And Making Good The Same In Case Of Rec
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Oct-2020 | Date extension - (Retender) TVM DP- 2020-21 - Pro no. 947- Supply and installation of equipments for Modern slaughter house in Karavaram | Date | 22-Oct-2020 |
BOQ
| Work Name:(Retender) ELECTRIFICATION OF NEWLY CONSTRUCTED INDOOR STADIUM AT NEERUVILA IN OTTUR GP | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | ELECTRIFICATION | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 90.2.1.7 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point | BI01010001010000000000000515BI0100001114 | 10 | each |
| 3 | 1.002 | 90.2.1.3 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories). | BI01010001010000000000000515BI0100001115 | 2 | point |
| 4 | 1.003 | 1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | BI01010001010000000000000515BI0100001116 | 1 | each |
| 5 | 1.004 | 90.3.18.2 : Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required. | BI01010001010000000000000515BI0100001117 | 2 | metre |
| 6 | 1.005 | 90.15.4.2 : Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | BI01010001010000000000000515BI0100001118 | 2 | each |
| 7 | 1.006 | 90.15.4.11 : Supply Conveyance, installation, testing and commissioning of 200W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) | BI01010001010000000000000515BI0100001119 | 9 | each |
| 8 | 1.007 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | BI01010001010000000000000515BI0100001120 | 30 | each |
| 9 | 1.008 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | BI01010001010000000000000515BI0100001121 | 2 | each |
| 10 | 1.009 | 2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps | BI01010001010000000000000515BI0100001122 | 2 | each |
| 11 | 1.01 | 2.13.3 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.100 amps | BI01010001010000000000000515BI0100001123 | 1 | each |
| 12 | 1.011 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual \n current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | BI01010001010000000000000515BI0100001124 | 2 | each |
| 13 | 1.012 | 2.2.14 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.125 Amp, 36 KA | BI01010001010000000000000515BI0100001125 | 1 | each |
| 14 | 1.013 | od848835/2020_2021 : Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly on wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required.<br>125A, 415V, 50Hz, AC23 A duty, 4 Pole On Load Changeover Switch Disconnector | BI01010001010000000000000515BI0100001126 | 1 | no |
| 15 | 1.014 | 90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | BI01010001010000000000000515BI0100001127 | 1 | each |
| 16 | 1.015 | 90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | BI01010001010000000000000515BI0100001128 | 1 | each |
| 17 | 1.016 | 90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required | BI01010001010000000000000515BI0100001129 | 1 | each |
| 18 | 1.017 | 1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm | BI01010001010000000000000515BI0100001130 | 720 | metre |
| 19 | 1.018 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm | BI01010001010000000000000515BI0100001131 | 300 | metre |
| 20 | 1.019 | 1.17.1 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.1 x 1.5 sq. mm | BI01010001010000000000000515BI0100001132 | 2000 | metre |
| 21 | 1.02 | 1.17.3 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm | BI01010001010000000000000515BI0100001133 | 870 | metre |
| 22 | 1.021 | 1.17.11 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm | BI01010001010000000000000515BI0100001134 | 1910 | metre |
| 23 | 1.022 | 1.53.1 : Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable | BI01010001010000000000000515BI0100001135 | 625 | metre |
| 24 | 1.023 | 90.6.4.2 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes. | BI01010001010000000000000515BI0100001136 | 600 | metre |
| 25 | 1.024 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. | BI01010001010000000000000515BI0100001137 | 30 | metre |
| 26 | 1.025 | 90.12.7.44 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. | BI01010001010000000000000515BI0100001138 | 30 | metre |
| 27 | 1.026 | 9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.3 1/2 X 50 sq. mm (35mm) | BI01010001010000000000000515BI0100001139 | 2 | set |
| 28 | 1.027 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for \nfollowing size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV \ngrade as required.4 X 16 sq. mm (28mm) | BI01010001010000000000000515BI0100001140 | 4 | set |
| 29 | 1.028 | 5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required | BI01010001010000000000000515BI0100001141 | 2 | set |
| 30 | 1.029 | 5.10 : Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required. | BI01010001010000000000000515BI0100001142 | 1 | metre |
| 31 | 1.03 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required | BI01010001010000000000000515BI0100001143 | 70 | metre |
| 32 | 1.031 | 90.16.5.3 : Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required. | BI01010001010000000000000515BI0100001144 | 8 | each |
| 33 | 1.032 | od845062/2020_2021 : Fabrication,supply& installation of dust and vermin proof,wall<br>mouting,thermoplastic meter box of following size suitable for fixing KSEB meter,fuse units,CT etc,hinged door construction for the front side with compartments if necessary,providing vision panel for the meter compartment, knock out for cable entry and exit.<br>600 x 300 x 214 | BI01010001010000000000000515BI0100001145 | 1 | no |
| 34 | 1.033 | od848833/2020_2021 : Supply and fixing 100 A, 2 Way neutral links mounted on DMC/SMC base | BI01010001010000000000000515BI0100001146 | 1 | no |
| 35 | 1.034 | od848834/2020_2021 : Supply and fixing 125 A, HRC Fuse Base with HRC Fuse link | BI01010001010000000000000515BI0100001147 | 3 | no |
AI Tender Summary
Tender Timeline
Tender Published
Tender notice published.
CompletedCorrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedBid Submission Deadline
Online submission via eProcurement portal.
CompletedBid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender