Repairs To Roof , Ceiling , Joinery And Periodical Services To Certain Bldgs At Pedong , Algarah , Dalapchand , Ap Algarah And Teesta Tcp Under Ge 867 Ews
Tender Value
25 Lakhs
Estimated cost
Bid Submission
22 Oct 2020
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pedong → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs To Roof , Ceiling , Joinery And Periodical Services To Certain Bldgs At Pedong , Algarah , Dalapchand , Ap Algarah And Teesta Tcp Under Ge 867 Ews
BOQ
| Name of Work: REPAIRS TO ROOF, CEILING, JOINERY AND PERIODICAL SERVICES TO CERTAIN BLDGS AT PEDONG, ALGARAH, DALAPCHAND, AP ALGARAH AND TEESTA TCP UNDER GE 867 EWS | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Approx No of Units Reqd | UNIT | |
| 1 | 1 | S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with \"L\" or \"J\" type hook bolts and bitumen washers as in roof covering etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge. | 180 | SQUARE METRE | |
| 2 | 2 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated (Trepezium or tiled pattern etc.,) steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa (pitch of corrugation shall be 200mm to 250mm and crest shall be 28mm to 32mm) as in roof covering/ cladding to wall fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge. | 50 | SQUARE METRE | |
| 3 | 3 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick (with 0.45 mm BMT) of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws including dismatling of existing steel sheeting of any type complete all as specified and directed by Engineer-in-Charge.\nMake for Item No. 2&3: TATA BLUESLOPPE/ LLYODS /JMBS/ EVEREST INDUSTRIES LTD/CRIL or equivalent as approved by GE. | 20 | SQUARE METRE | |
| 4 | 4 | S&F 0.63 mm thick galvanised, plain mild steel sheeting fixed with \"L\" or \"J\" type hook bolts and bitumen washers as in ridges, hips,valley gutters, drip and straight flashing etc.,with grade of Zinc coating 275 Grms/Sqm including taking down existing steel sheetng of any type complete all as specified and directed by Engineer-in-Charge. | 25 | SQUARE METRE | |
| 5 | 5 | S&FS&F 1mm thick Mild steel galvanised class 3 sheet as in eaves gutters, 125mm dia, half round with rounded edges including taking down existing eaves gutters complete all as specified and directed by Engineer-in-Charge. | 40 | RUNNING METRE | |
| 6 | 6 | M&L for 4mm thick asbestos cement building boards, fixed with nails to tmber frame work including taking down existing boards of any type complete all as specified and directed by Engineer-in-Charge.\nMAKE: Bison/NCL/EVEREST/UPAL or eqivalent as approved by GE. | 30 | SQUARE METRE | |
| 7 | 7 | M&L for 4mm thick plywood with commercial face veneers, BWR grade, type BB, fixed with screws to tmber frame work in ceiling including taking down existing plywood of any type complete all as specified and directed by Engineer-in-Charge. | 30 | SQUARE METRE | |
| 8 | 8 | M&L for 6mm thick plywood with commercial face veneers, BWR grade, type BB, fixed with screws to tmber frame work in ceiling including taking down existing plywood of any type complete all as specified and directed by Engineer-in-Charge.\n | 10 | SQUARE METRE | |
| 9 | 9 | M&L 12mm thick veneered particle board, exterior grade, with decorative face veneers on one face fixed with screws to timber frame work complete including taking down existing unserviceable boarding of any description all as directed by Engr-in-charge.\nMake for ItemNo. 7 to 9:- Green ply/Kitply/Century/National/Swastik/ Ecoboard/Alishan/ Marino/ Archid or equivalent as approved by GE. | 5 | SQUARE METRE | |
| 10 | 10 | M&L for false ceiling with light weight PVC hollow section panels made of 1mm thick PVC sheet and overall thickness of panel minimum 7mm and 200mm wide strips fixed in and including GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including taking down existing ceiling boards of any type complete all as specified and as directed by Engineer-in-charge.\nMAKE: Rajshree plast wood/Sintex/Nandi or equivalent as approved by GE. | 50 | SQUARE METRE | |
| 11 | 11 | M&L in repairs second class hard wood clean sawn fillets of sectional area exceeding 6 Sqcm and not exceeding 13 Sqcm, square, rectangular or triangular in section, fixed with nails or brads complete all as specified and as directed by Engineer-in-Charge.\nWOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal | 60 | RUNNING METRE | |
| 12 | 12 | M&L Preparing new or previously un treated surfaces of wood and wood based surfaces of any description not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and directed.\nMake: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/ NEROLAC | 6 | TEN RUNNING METRES | |
| 13 | 13 | M&L for preparing newly plastered surfaces of AC board ceilings and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.\nMake: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. | 30 | SQUARE METRE | |
| 14 | 14 | M&L for second class hard wood clean sawn scantling, unframed and fixed including taking down existing scantling complete all as specified and as directed by Engineer-in-Charge.\nWOOD: Sal/Kalasiris/Chaplash/Hollock/Bijasal | 0.75 | CUBIC METRE | |
| 15 | 15 | Taking down existing second class hard wood clean sawn scantling, unframed and and refixing in same location or new location in the same building complete all as specified and as directed by Engineer-in-Charge. | 0.05 | CUBIC METRE | |
| 16 | 16 | M&L for 20mm thick or feather edged 15mm to 20mm thick second class hard wood weather boarding, clean sawn, with 30 mm laps as in eaves board including taking down existing boarding of any type complete all as specified and directed by Engineer-in-Charge.\nTIMBER: - Sal/Kalasiris/Chaplash/Hollock/Bijasal | 10 | SQUARE METRE | |
| 17 | 17 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. | 50 | SQUARE METRE | |
| 18 | 18 | M&L for coloured glazed ceramic tiles of size 300x200x7mm thick on vertical surfaces such as skirting/dado, jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick rendering in cement mortar 1:4 backing coat including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engineer –in-Charge. | 45 | SQUARE METRE | |
| 19 | 19 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. | 25 | SQUARE METRE | |
| 20 | 20 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,on vertical surfaces such as skirting, dados, raisers to steps etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 10mm thick screed bed in cement mortar 1:4 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge. | 5 | SQUARE METRE | |
| 21 | 21 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc., jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on and including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles and removing rubbish off the premises complete all as directed by Engr-in-charge.\nMake for Item No 17 to 21: NITCO/ SOMANY/ ASIAN / JOHNSON/KAJARIA/ORIENT BELL | 20 | SQUARE METRE | |
| 22 | 22 | M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing block masonry complete all as specified and directed by Engineer-in-charge.\nMake: Shankar Saw Mills/Sangam Prefeb Products | 4 | CUBIC METRE | |
| 23 | 23 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge. | 10 | SQUARE METRE | |
| 24 | 24 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including Integral waterproofing compound @ 3% by weight of cement as per manufacturer's instructions complete all as specified and directed by Engr-in-charge. | 20 | SQUARE METRE | |
| 25 | 25 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. | 130 | SQUARE METRE | |
| 26 | 26 | M&L for rendering 15 mm thick on brickwork or concrete surfaces in cement mortar 1:4 finished fair and even including Integral waterproofing compound @ 3% by weight of cement as per manufacturer's instructions including taking down cement plaster on brick or stone masonry surfaces of walls etc., including raking out joints, hacking for key, scrubbing down with water etc., and removing rubbish off the premises complete all as specified and directed by Engr-in-charge. | 130 | SQUARE METRE | |
| 27 | 27 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge.\nMake: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE. | 41 | SQUARE METRE | |
| 28 | 28 | M&L for preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over one coat of primer over thin layer of wall care putty (Birla white/Berger/Asian) complete all as specified and as directed by Engineer-in-Charge.\nMake: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL | 125 | SQUARE METRE | |
| 29 | 29 | M&L for 75 mm thick Plain Cement Concrete 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base and finishing even and rough to receive toping layer including demolition of existing concrete and removing rubbish off the premises complete all as specified and directed by Engineer-in-charge. | 80 | SQUARE METRE | |
| 30 | 30 | M&L for 40mm thick plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors laid in alternative bays and finished even and smooth using extra cement including demolition of existing flooring and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge. | 40 | SQUARE METRE | |
| 31 | 31 | M&L for 3mm thick 38mm wide inserted in position in flooring to confirm to design complete all as specified and directed by Engineer-in-Charge. | 30 | RUNNING METRE | |
| 32 | 32 | M&L 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection, paths etc., laid in alternative bays finished even and smooth without using extra cement including demolition of existing concrete and removing rubbish off the premises complete all as directed by Engr-in-charge. | 70 | SQUARE METRE | |
| 33 | 33 | M&L for cement concrete chequered tiles 300 x 300 x 25 mm thick with grey cement and no pigment, set and jointed in neat cement slurry and pointed in grey cement to match the surfaces as in floors over and including 15 mm thick screed bed in cement mortar 1:6 including demolition of existing tiles and removing rubbish off the premisescomplete all as specified and directed. \nMake: NITCO/DECO/BHARAT or equivalent as approved by GE. | 50 | SQUARE METRE | |
| 34 | 34 | S&F 15mm bore GI water tubing medium grade with all fittings and fixed to wall, floor, ceiling complete including short lengths including taking down existing GI pipe complete all as specified and as directed by Engr-in-charge.\nMake: TATA/JINDAL/ZENITH | 30 | RUNNING METRE | |
| 35 | 35 | S&F in repairs bib taps 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, screwed for iron pipe all as specified and directed by Engr-in-Charge.\n | 30 | EACH | |
| 36 | 36 | S&F Pillar taps fancy type 15 mm bore, cast copper alloy, chromium plated with crown or capstan head screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe, fixed in repairs, all as specified and directed by Engr-in-Charge. | 10 | EACH | |
| 37 | 37 | S&F in repairs Stop/angle valves 15 mm bore, cast copper alloy chromium plated screwed down high pressure, with crown or capstan head, concealed type with long shank ang cup screwed both ends for iron pipe or for unions all as specified and directed by Engr-in-Charge.\nMake for Item No. 35 to 37: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE) | 25 | EACH | |
| 38 | 38 | S&F in repairs PVC connection pipe 15mm dia, 600mm long with PTMT check nuts and washer on both ends complete all as directed by Engr-in-Charge.\nMake:- PRAYAG/POLYTUFF or equivalent as approved by GE. | 40 | EACH | |
| 39 | 39 | S&F PVC valveless, symphonic action type, flushing cistern 10ltr capacity, low level, white with inlet ball valve float and handle along with suitable flush pipe/bend including brackets fixed in repairs complete all as directed by Engr-in-Charge.\nMake: PARRY WARE (SLIMLINE)/ COMMANDER/ HINDWARE | 15 | EACH | |
| 40 | 40 | Taking down existing IWC along with its cement concrete bedding and P or S trap and S&F Orrissa pattern vitreous china squatting pan white colour of size 580x440mm with integral footrest (Excluding flushing cistern and flush pipes) but including cement concrete bedding and P or S trap as required including PVC pipe upto finished floor level to connect flush pipe, making good all the disturbed surfaces of floor to match the adjoining complete all as directed by Engineer-in-Charge.\nMake: HINDWARE / NEYCER/ PARRYWARE / CERA | 8 | EACH | |
| 41 | 41 | S&F Vitreous china wash down water closet pan (pedestal pattern) white, excluding flushing cistern and flush pipe but including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including taking down existing unserviceable/broken EWC complete all as specified and directed Engr-in-Charge.\nMake: HINDWARE / NEYCER/ PARRYWARE / CERA | 5 | EACH | |
| 42 | 42 | S&F Vitreous China wash basin, white, flat back, of size 550x400 mm, excluding taps, waste chain and plug and porcelain stopper but including brackets and 40mm dia brass chromium plated waste fitting and 40mm dia 90cm long PVC waste pipe, including taking down existing unserviceable/broken wash hand basin all as specified and directed by Engr-in-Charge.\nMake: HINDWARE / NEYCER/ PARRYWARE / CERA | 5 | EACH | |
| 43 | 43 | S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm (minimum), white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as directed by Engr-in-charge.\nMake: HINDWARE / NEYCER/ PARRYWARE / CERA | 5 | EACH | |
| 44 | 44 | S&F PVC (SWR) pipes 110mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge. | 15 | RUNNING METRE | |
| 45 | 45 | S&F PVC (SWR) pipes 75mm bore single socket in any length with rubber ring joints fixed to wall or laid in floors including taking down existing pipes complete all as directed by Engr-in-Charge. | 20 | RUNNING METRE | |
| 46 | 46 | S&F in repairs PVC (SWR) bends (any radius) suitable for 110mm bore pipe fitted with access door complete all as directed by Engr-in-charge. | 6 | EACH | |
| 47 | 47 | S&F in repairs PVC (SWR) bends (any radius) suitable for 75mm bore pipe fitted with access door complete all as directed by Engr-in-charge.\nMake for item No 44 to 47: PRINCE/ SUDHAKAR/ NANDI/ FINOLEX/ SWASTIK/SUPRIME | 20 | EACH | |
| 48 | 48 | S&F in repairs 600 mm x 450 mm beveled edge mirror of selected quality glass 5.5mm thick mounted on 6 mm thick AC building board or commercial plywood & fixed with wooden plugs with chromium plated brass screws and washer and aluminum beading complete all as directed by Engr-in-Charge.\nMake: COMMANDER PATTERN / (MANGOLD)/ JASMINE/ GOLDEN FISH or equivalent as approved by GE. | 8 | EACH | |
| 49 | 49 | S&F in repairs chromium plated health faucet, fancy type, ABS SS braided hose 1m long with hook, screwed to iron pipe all as specified and directed by Engr-in-Charge.\nMake: SEIKO/RYBO/SPECTRUM/ NMC/L&K/ESSCO (DELUXE) | 20 | EACH | |
| 50 | 50 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed. | 10 | EACH | |
| 51 | 51 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.5 Sqm and not exceeding 4 sqm each, including cutting holes for taking out hold fasts or dismantling brick work and making good in PCC 1:2:4 type B1 or cement mortar 1:4 (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed. | 12 | EACH | |
| 52 | 52 | Taking down shutters of any description area exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. | 5 | EACH LEAF | |
| 53 | 53 | Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and as directed. | 5 | EACH LEAF | |
| 54 | 54 | S&F second class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid ,rounded or chamfered put together with glue pinned joints all as specified and directed.\nTIMBER: - Sal/Kalasiris/Chaplash/Hollock/Bijasal | 0.32 | CUBIC METRE | |
| 55 | 55 | S&F 105x60 mm size pressed steel door frame for doors made of 1.25mm sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including PCC 1:2:4 type B0 filling complete all as directed by Engr-in-Charge.\nMake: -B A Enterprises/Multiwyn/Doorwyn/Modern fabricator/Madhu industries/Ajanta Ispat/Alusys or equivalent as approved by GE. | 10 | RUNNING METRE | |
| 56 | 56 | S&F 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, commercial type on both faces complete all as specified and directed by Engineer-in-Charge.\nMake: - Green Ply/Archid Ply or equivalent as approved by GE. | 4.2 | SQUARE METRE | |
| 57 | 57 | S&F Anodised aluminium frame for partitions, doors, windows ventilators with one or more rebates, grills including joining cleat for fixing etc., complete all as specified and dierected by Engr-in-Charge. | 30 | KILOGRAM | |
| 58 | 58 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, 1 no mortise lock per each door, hinges, anodised alumnium snap beading, screws etc., with and including 5mm thick plain glass as panel insersts complete all as specified and directed.\nMake for Item No. 57&58: JINDAL/INDALCO/HINDALCO | 12 | SQUARE METRE | |
| 59 | 59 | M&L Preparing surfaces of wood and wood based materials, steel and iron work , new or old, of any description not otherwise described exceeding 0.10 Sqm and not exceeding 0.50 Sqm each, and treated with tar or coal tar black paint all as specified and directed. | 0.1 | ONE HUNDRED NUMBERS | |
| 60 | 60 | M&L Mild steel work such as bands, straps, clamps and hold fasts etc. of Fe-290 Gde E-165 all as specified and directed. | 25 | KILOGRAM | |
| 61 | 61 | S&F factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and dawings. | 27 | RUNNING METRE | |
| 62 | 62 | S&F Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colourr PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as per specification and drawing.\nMake for Item No. 61 & 62: - SINTEX / RAJSHRI PLASTIWOOD/ NANDI/ UNIVERSAL | 9 | SQUARE METRE | |
| 63 | 63 | S&F 30mm thick 2nd class hard wood plain framed panelled shutters (any number of panels) with panels of 12mm thick timber flat on both sides or of 12mm thick veneered particle board ,medium density, wood particle board with commercial face veneers with sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats complete all as specified directed by Engr-in-charge. | 14.5 | SQUARE METRE | |
| 64 | 64 | S & F 30 mm thick second class hard wood Glazed and skeleton shutters for doors, open rebated and prepared to receive glass,gauze etc. divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamferred or rounded, fitted with cut and mitred beads for securing glass, wire gauge etc. ; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) fitted to chowkats all as specified and directed.\nTimber for item Nos. 62&63:- Sal/Kalasiris/Chaplash/Hollock/Bijasal | 3.5 | SQUARE METRE | |
| 65 | 65 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge. | 7.5 | SQUARE METRE | |
| 66 | 66 | S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.\nMake for Item No. 65&66: -B A Enterprises/Multiwyn/Doorwyn/ Modern fabricator/Madhu industries/Ajanta Ispat/Alusys/AVA steels or equivalent as approved by GE. | 7.5 | SQUARE METRE | |
| 67 | 67 | S & F galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or wooden beeds all as specified and directed. | 3.5 | SQUARE METRE | |
| 68 | 68 | S & F in repairs galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples or wooden beeds all as specified and directed.\nMake for Item No. 67&68: -Kamal/Shalimar or equivalent as approved by GE. | 30 | SQUARE METRE | |
| 69 | 69 | S&F Mild steel works as in grills, framed guard bars, and similar works conforming to Fe-290, Gde E-165 all as specified and directed. | 45 | KILOGRAM | |
| 70 | 70 | S&F 100 mm size cold rolled mild steel medium weight butt hinges complete all as specified and directed. | 20 | EACH | |
| 71 | 71 | S&F 100 mm size cold rolled mild steel medium weight butt hinges including taking down existing hinge complete all as specified and directed. | 40 | EACH | |
| 72 | 72 | S&F 150 mm long Aluminium alloy handles cast type anodised all as specified and directed. | 10 | EACH | |
| 73 | 73 | S&F 150 mm long Aluminium alloy handles cast type anodised including taking down existing handle complete all as specified and directed. | 20 | EACH | |
| 74 | 74 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed. | 15 | EACH | |
| 75 | 75 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section including taking down existing tower bolt complete all as specified and directed. | 30 | EACH | |
| 76 | 76 | S&F 250mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed. | 10 | EACH | |
| 77 | 77 | S&F 250mm long aluminium alloy anodised sliding door bolts with hasp & staple (bolt type) and fixing clip of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy including taking down existing sliding door bolt complete all as specified and directed.\nMake for Item No. 70 to 77: - CROWN/ CLASSIC/ JYOTHI/ AMIT/ MOWJEE/ARGENT/Bharat/Alans/Hettich/Everlite or any ISI marked make as approved by GE. | 10 | EACH | |
| 78 | 78 | S & F 3mm thick sheet glass ordinary quality fixed with oil putty and necessary clips/nut bolts or beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. | 5.5 | SQUARE METRE | |
| 79 | 79 | Hacking out old broken glass and S & F 3mm thick sheet glass ordinary quality fixed with oil putty or beads and necessary clips/nut bolts area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. | 17 | SQUARE METRE | |
| 80 | 80 | S & F 3mm thick figured glass pin head type fixed with oil putty and necessary clips/nut bolts or beads area not exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge. | 1 | SQUARE METRE | |
| 81 | 81 | Hacking out old broken glass and S & F 3mm thick figured glass pin head type fixed with oil putty and necessary clips/nut bolts or beads area exceeding 0.5Sqm in each pane complete all as directed by Engr-in-Charge.\nMake for item Nos. 78 to 81:- TRIVENI/ SAINT GOBAIN/ MODIGUARD/ATUL/ HINDUSTAN or equivalent as approved by GE. | 2 | SQUARE METRE | |
| 82 | 82 | S&F in repairs harrison rails (curtain rods or drapery rods) aluminium powder coated 18-19mm dia with fixing brackets, stops, rollers etc., complete all as directed by Engineer-in-Charge. | 40 | RUNNING METRE | |
| 83 | 83 | M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of creosote oil complete all as specified and directed by Engineer-in-Charge. | 10 | SQUARE METRE | |
| 84 | 84 | M&L preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge. | 80 | SQUARE METRE | |
| 85 | 85 | M&L preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge.\nMake for Item No. 84&85: ASIAN/ SHALIMAR/ BERGER/ JENSON&NICHOLSON/IEL/ NEROLAC | 20 | SQUARE METRE | |
| 86 | 86 | M&L for preparation of old plastered/unplasterd white washed surfaces of walls and applying one coat of white washing complete all as specified and as directed by Engineer-in-Charge. | 3000 | SQUARE METRE | |
| 87 | 87 | M&L for preparation of old plastered/unplasterd white washed surfaces of ceilings and applying one coat of white washing complete all as specified and as directed by Engineer-in-Charge. | 500 | SQUARE METRE | |
| 88 | 88 | M&L for preparation of old plastered/unplasterd colour washed surfaces of walls and applying one coat of colour washing complete all as specified and as directed by Engineer-in-Charge.\nMake for item Nos. 86 to 88: LOVELYCEM/ SURYACEM/ JANATHACEM/ LUCKYCEM or equivalent make as approved by GE. | 500 | SQUARE METRE | |
| 89 | 89 | M&L preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. | 3500 | SQUARE METRE | |
| 90 | 90 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth (other than in roof) and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. | 400 | SQUARE METRE | |
| 91 | 91 | M&L preparing old painted steel and iron surfaces of any description over 10 cm width or girth of CGI sheet in roof etc., and applying one coat of synthetic enamel paint (Corrugal) complete all as specified and directed by Engineer-in-Charge.\nMake for item No. 89 to 91: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON/IEL | 5000 | SQUARE METRE | |
| 92 | 92 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping and applying one coat of distemper oil emulsion complete all as specified and as directed by Engineer-in-Charge.\nMake: ASIAN/SHALIMAR/BERGER/ JENSON & NICHOLSON | 4000 | SQUARE METRE | |
| 93 | 93 | M&L preparing old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of creosote oil complete all as specified and directed by Engineer-in-Charge. | 750 | SQUARE METRE | |
| 94 | 94 | M&L preparing old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of varnish complete all as specified and directed by Engineer-in-Charge. | 400 | SQUARE METRE | |
| 95 | 95 | M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces, from surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and as directed by Engineer-in-Charge.\nMake: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM | 200 | SQUARE METRE | |
| 96 | 96 | M&L for preparation of old treatedsurfaces of walls and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge.\nMake: INDOCEM/ SUPERSNOWCEM/ AQUACEM/ DURACEM | 3500 | SQUARE METRE | |
| 97 | 97 | M&L for Complete removal of the existing treatment on walls by scraping and washing down with water including making good the surfaces, from surfaces of walls and applying two coats of premium Exterior emulsion paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.\nMake: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR | 23 | SQUARE METRE | |
| 98 | 98 | M&L for preparation of old treated surfaces of walls and applying one coat of premium Exterior emulsion paint complete all as specified and directed by Engineer-in-Charge.\nMake: APPEX of ASIAN or equivalent in JENSON & NICHOLSON/ BERGER/ SHALIMAR | 620 | SQUARE METRE | |
| 99 | 99 | M& L for Obliterating old writing of any description not exceeding 0.10 sqm with thick paint to match existing work complete all as specified and directed by Engineer-in-Charge. | 30 | JOB | |
| 100 | 100 | M& L for Obliterating old writing of any description exceeding 0.10 sqm and not exceeding 0.50 Sqm with thick paint to match existing work complete all as specified and directed by Engineer-in-Charge. | 4 | JOB | |
| 101 | 101 | Sub Total of Schedule 'A' | |||
| 102 | 102 | Schedule of Credit (Minus) Rs. 57,340.00 B/F from Ser page No. 33 \nNOTE: Bidder shall insert credit amount as rate Rs. 57,340.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender. | 1 | EACH | |
| 103 | 103 | Sub Total of Schedule of Credit |
AI Tender Summary
Tender Timeline
Oct 10, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 23, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender