Rural Development Government Departments Closing in 0 days TDR #25686472

Construction Of Anganwadi Building At Pardi ( Juni . ) In G . P . Pardi . . Tah . - Korpana

Issued by Government Departments · Korpana, Maharashtra
Tender Value
9.40 Lakhs
Estimated cost
Bid Submission
22 Oct 2020
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Korpana → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Anganwadi Building At Pardi ( Juni . ) In G . P . Pardi . . Tah . - Korpana

BOQ

Name of Work: C/O Anganwadi Building At Pardi (Juni.) in G. P. Pardi.. Tah.- Korpana, DIST:- CHANDRAPUR T.S.No.-
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Excavation for foundation in earth, soil of all types, sand, graveland soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stackingand spreading as directed, dewatering, preparing the bed forthe foundation and necessary back filling, ramming, wateringincluding shoring and strutting etc. complete. (Lift upto 1.5 m.)BI01010001010000000000000515BI010000111347.68Cum
22Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming, watering etc. complete.BI01010001010000000000000515BI010000111411.62Cum
33Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandBI01010001010000000000000515BI01000011156.54Cum
44Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, stripfoundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I.\nquality Artificial SandBI01010001010000000000000515BI01000011167.19Cum
55Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. omplete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandBI01010001010000000000000515BI01000011174.14Cum
66Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandBI01010001010000000000000515BI01000011185.56Cum
77Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks,laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcBI01010001010000000000000515BI01000011196.6Cum
88Providing and laying Cast in situ/Ready Mix cement concrete M- 20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial SandBI01010001010000000000000515BI01000011200.36Cum
99Providing and laying Cast in situ/Ready Mix cement concrete M- 15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)BI01010001010000000000000515BI01000011210.49cum
1010Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.BI01010001010000000000000515BI010000112236.3cum
1111Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as\nrequired complete.BI01010001010000000000000515BI01000011231.67mt
1212Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.BI01010001010000000000000515BI01000011242.29Cum
1313Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteBI01010001010000000000000515BI010000112522.45sqm
1414Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.BI01010001010000000000000515BI010000112687.17sqm
1515Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.completeBI01010001010000000000000515BI0100001127110.26sqm
1616Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.BI01010001010000000000000515BI010000112820.25sqm
1717Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. completeBI01010001010000000000000515BI01000011297.25Sqm
1818Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)BI01010001010000000000000515BI01000011304.32Sqm
1919Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622- 2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring.BI01010001010000000000000515BI010000113124.17Sqm
2020Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting.BI01010001010000000000000515BI01000011322.63Sqm
2121Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural SandBI01010001010000000000000515BI010000113321.92Sqm
2222Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete.BI01010001010000000000000515BI0100001134110.26Sqm
2323Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete.BI01010001010000000000000515BI010000113587.17Sqm
2424Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140\nkg with frame etc completeBI01010001010000000000000515BI01000011361NO
2525Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.BI01010001010000000000000515BI01000011371sqm
2626Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying)BI01010001010000000000000515BI01000011381no
2727Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. completeBI01010001010000000000000515BI010000113910Rmt
2828Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)BI01010001010000000000000515BI01000011401No
2929Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before useBI01010001010000000000000515BI01000011411No

AI Tender Summary

OUR REF NO 25686472
AUTHORITY Government Departments
TENDER VALUE 9.40 Lakhs
LAST DATE 22-10-2020
Authority
Authority Name Rural Development Department
Work Description Construction Of Anganwadi Building At Pardi ( Juni . ) In G . P . Pardi . . Tah . - Korpana
Basic Detail
Tender No WORKS_ZP_CHANDRAPUR_07_20_21
Bidding Type Tender
Location
City Korpana
State Maharashtra
Key Dates
Publish Date 12 Oct 2020
Submission Date 22 Oct 2020
Open Date 23 Oct 2020
Finance
Tender Value 9.40 Lakhs
Tender Fee 1000
EMD 10000
Exemption Not Available
Document List
BOQ_1064174.xls
Tendernotice_1.pdf
87A681A4-6691-4066-B600-3F613703502B.html
PardioldTest02.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 12, 2020
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 22, 2020
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 23, 2020

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_1064174.xls

pdf

Tendernotice_1.pdf

html

87A681A4-6691-4066-B600-3F613703502B.html

pdf

PardioldTest02.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders