Improvement Of Living In Billets Of Air Warriors At Af Stn Bamrauli
Tender Value
83.46 Lakhs
Estimated cost
Bid Submission
24 Oct 2020
0 days left
EMD
1.65 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GE AF Bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement Of Living In Billets Of Air Warriors At Af Stn Bamrauli
BOQ
| Name of Work: IMPROVEMENT OF LIVING IN BILLETS OF AIR WARRIRS AT AF STN BAMRAULI. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of Mud/mud puska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed. | 102.6 | Cum | |
| 2 | 2 | Dismantling of brick tiles laid bedded and pointed in any mortar on roof , channels, kerbs, aprons etc,cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed. | 114 | Xsqm | |
| 3 | 3 | M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding, benching existing roof slab to slope as per existing or as sirected including finished surface even and fair complete all as specified and directed. | 1140 | Sqm | |
| 4 | 4 | M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) as per manufacturerrs instruction inclduing finishing surfaces even and smooth without using extra cement complete all as specified and directed. (Note: WPC will be measured and paid separately). | 1140 | Sqm | |
| 5 | 5 | M&L for cleaning the roof surfcae from dust /dirt and any other foreign materials and applying a coat of bituminius primer @ 0.30 liters per square meter uniformity after the surfaces fully dried complete all as specified and directed. | 1140 | Sqm | |
| 6 | 6 | M&L for applying a coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm conforming to IS 702 over primed surface of roof slab complete all as specified and directed. | 1140 | Sqm | |
| 7 | 7 | M & L for APP based polymeric water proofing membrane minimum weight 3 Kg/ Sqm and minimum 3mm thick reinforced with polyster non woven fabrick (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer complete all as specified and as directed. | 1140 | Sqm | |
| 8 | 8 | M&L for brick tiles 40mm thick over roof treatment, laid over and including 15mm thick screed bed in cement mortar (1:6) mixed with and including polymer based liquied water proofing additive @ 200ml liquid water proofing compound by 50Kg weight of cement (1 bag) or as per manufacturers specification and joints of brick tiles shall be filled with cement mortar (1:4) mix with and including 5% curde oil complete all as specified and directed. | 590 | Sqm | |
| 9 | 9 | All as per Srl Item No 08 above but except tiles (Tiles shall be obtained from dismantling under respective items. Necessary cleaning removing mortar segregation, stacking etc shall be included in quoted rate of contractor complete all as specified and directed. | 550 | Sqm | |
| 10 | 10 | Supply only Integral waterproofing compound complete all as specified and directed. | 299.43 | Kg | |
| 11 | 11 | Demolition of brick work or stone boulder masnary built in cement mortar including all quoins, arches pillars, etc complete all as directed by Engineer –in-charge | 16.72 | Cum | |
| 12 | 12 | Demolition of cement concrete (unreinforced) in ground floor and paving n exc 15 cm thick (below or above ground level complete all as directed by Engineer –in-charge. | 71.9 | Cum | |
| 13 | 13 | Taking down cement plaster/terrazzo on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete, all as specified and as directed by Engineer –in-charge. | 860 | Sqm | |
| 14 | 14 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in CM (1:4) complete all as specified and directed | 4.73 | Cum | |
| 15 | 15 | M&L, rendering 15mm thick in cement mortar (1:4), on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement. (Note: WPC will be measured and paid separately). | 555 | Sqm | |
| 16 | 16 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth (Without using extra cement) complete all as specified | 240 | Sqm | |
| 17 | 17 | M&L for 5 mm thick rendering in CM (1:3) on fair faces of brick work or concrete ceiling surfaces finished even and smooth without using extra cement etc complete all as specified. | 60 | Sqm | |
| 18 | 18 | M&L for 10 mm thick rendering in CM (1:3) on fair faces of concrete (Chajja, similar suspended work & Top Projection) ceiling surfaces finished even and smooth without using extra cement etc complete all as specified and as directed. | 40 | Sqm | |
| 19 | 19 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of primer with a thin layer of 1mm thick wall care putty complete all as specified. | 1664 | Sqm | |
| 20 | 20 | M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of primer with a thin layer of 1mm thick wall care putty complete all as specified. | 140 | Sqm | |
| 21 | 21 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of Exterior emulsion paint over a coat of primer etc complete all as specified and as directed. | 842 | Sqm | |
| 22 | 22 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of Exterior emulsion paint (Dark colour) over a coat of primer etc complete all as specified and as directed. | 126 | Sqm | |
| 23 | 23 | M&L for preparation of newly plastered surfaces of external wall and applying two coats of Exterior emulsion paint over a coat of primer etc complete all as specified and as directed. | 540 | Sqm | |
| 24 | 24 | M&L for preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash etc complete all as specified and directed. | 1624 | Sqm | |
| 25 | 25 | M&L for preparation of new plastered surfaces of walls and applying three coats of white wash etc complete all as specified and directed. | 100 | Sqm | |
| 26 | 26 | M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash etc complete all as specified and directed. | 1724 | Sqm | |
| 27 | 27 | M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash etc complete all as specified and directed. | 100 | Sqm | |
| 28 | 28 | M&L for preparation of old surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed. | 190 | Sqm | |
| 29 | 29 | M&L for preparation of old or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint etc complete all as specified and directed. | 344 | Sqm | |
| 30 | 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. | 2200 | Sqm | |
| 31 | 31 | M&L for plain cement concrete 1:4:8 type D2 ( using 40 mm graded stone aggregate) in sub base and foundations filling and mass concrete all as specified and directed. | 36.72 | Cum | |
| 32 | 32 | M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course etc surface finish fair and even complete all as specified and directed. | 790 | Sqm | |
| 33 | 33 | M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. | 80 | Sqm | |
| 34 | 34 | M&L for Non Skid joint free coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile and laid over and inclduing 15mm thick screed bed layer in CM (1:6) complete all as specified and directed. | 1500 | Sqm | |
| 35 | 35 | M&L for premium quality Glazed ceramic colour tiles in vertical surface of size 350 x250x 7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. | 480 | Sqm | |
| 36 | 36 | M&L for premium quality Non Skid coloured ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. | 60 | Sqm | |
| 37 | 37 | Dismantling of stone slab of any description on thickness in floor aprons etc in laid bedded and pointed in any mortar complete all as specified and directed. | 0.8 | Per 10 Sqm | |
| 38 | 38 | M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. | 8 | Sqm | |
| 39 | 39 | M & L for 75 mm thick PCC 1:3:6 type C-1 for plinth protection surface finish fair and even etc complete all as specified and directed. | 226 | Sqm | |
| 40 | 40 | S&F in replacement vitreous china squatting pan of orissa pattern size 580 X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of concrete bedding complete all as specified and directed. | 24 | Each | |
| 41 | 41 | Supply and fixing in repairs 10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe and connected to squat pattern WC complete all as specified and directed. | 24 | Each | |
| 42 | 42 | S & F in repair vitreous china wash hand basin, white flat/angle back size 550 x 400 mm complete incl necessary cutting holes and pinning in ends of brackets and 32 mm PTMT waste coupling complete all as specified and as directed. | 16 | Each | |
| 43 | 43 | S&F Vitrous china bowl urinal flat back, size of 465x355x265mm wide with greating and union for discharge pipe etc complete all as speified and as directed. | 8 | Each | |
| 44 | 44 | S&F in repair 15 mm bore stop valve ISI marked, cast copper alloy, screwed down, high pressure, fancy type handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. | 40 | EACH | |
| 45 | 45 | S&F in repair CP 15 mm dia bib tap cast copper alloy with fancy type handle screwed down, screwed for iron pipe complete all as specified and directed. | 42 | EACH | |
| 46 | 46 | S&F pillar tap 15 mm bore fancy type, cast copper alloy, with capasten head, chromium plated, screwed down high pressure, with or without lettered 'Hot or cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. | 16 | Each | |
| 47 | 47 | S&F CP Push tap 15mm dia cast copper alloy fancy type screwed for iron pipe and fixed.(Minimum weight not less than 350 gms) complete all as specified and directed. | 8 | Each | |
| 48 | 48 | S&F in repair 15mm dia stop valves/angle cock fancy type cronium plated with long shank and cup (concealed type)cast copper alloy screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe cast copper alloy complete all as specified and directed. | 16 | Each | |
| 49 | 49 | S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and directed. | 16 | Each | |
| 50 | 50 | S&F for 40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. | 8 | RM | |
| 51 | 51 | S&F PVC waste pipe 32mm dia 800 mm long for wash basin complete all as specified and directed. | 12 | Each | |
| 52 | 52 | Supply and fixing PVC connection 450 mm long with brass coupling on both end suitable for 15 mm bore of pipe complete all as specified and directed. | 48 | Each | |
| 53 | 53 | S&F in repair CP tubular towel rail 20mm dia D type 60cm long between flanges complete all as specified and directed. | 20 | Each | |
| 54 | 54 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) complete all as specified and directed. | 16 | Each | |
| 55 | 55 | S&F in repair 600mmX450mm bevelled edge Mirror of selected quality glass mounted on 6mm thick AC Bldg board or commercial ply wood and fixed to wooden plugs with chromium plated brass screwed and cup washers complete all as specified and directed. | 16 | Each | |
| 56 | 56 | M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. | 100 | RM | |
| 57 | 57 | S & F 500ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. | 4 | EACH | |
| 58 | 58 | S & F 1000ltr rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. | 2 | EACH | |
| 59 | 59 | S&F 20mm dia ball valves high pressure of with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed. | 6 | EACH | |
| 60 | 60 | S&F in repair 20mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and directed. | 6 | EACH | |
| 61 | 61 | Taking down steel water tubing and connections including removing from site of 15mm bore pipe all as specified and directed by Engineer-in-charge. | 180 | RM | |
| 62 | 62 | Taking down steel water tubing and connections including removing from site of 20mm bore pipe all as specified and directed by Engineer-in-charge. | 80 | RM | |
| 63 | 63 | Supply, laying and testing 15mm bore galvanised steel water tubing medium grade, with all fitting fixed to walls, laid in floors/ceiling complete all as specified and directed. | 180 | RM | |
| 64 | 64 | Supply, laying and testing 20mm bore galvanised steel water tubing medium grade, with all fitting fixed to walls, laid in floors/ceiling and all as specified. | 60 | RM | |
| 65 | 65 | Refixing old steel tubing 20mm bore and connections in new or old position (Walls, ceiling, floors, etc.) and all as specified. (Old serviceable pipe obtained from Item No 62 shall be reused after cleaning of pipe) complete all as specified and directed. | 20 | RM | |
| 66 | 66 | Taking out eaves gutters and rain water pipe (any size or pattern) including all fittings complete all as specified and directed. | 96 | RM | |
| 67 | 67 | S&F for 100mm dia cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall with oval access doors etc complete all as specified and directed. | 50 | RM | |
| 68 | 68 | S&F 100mm dia Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed. | 10 | RM | |
| 69 | 69 | S&F for 75mm dia cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to wall with oval access doors etc complete all as specified and directed. | 36 | RM | |
| 70 | 70 | S&F for 100mm dia Cast iron Bends (any radius) with duck’s foot or heel rest with oval access doors complete all as specified and directed. | 24 | EACH | |
| 71 | 71 | S&F for 75mm dia Cast iron Bends (any radius), diminishing pieces or tappers (larger bore measured) with oval access doors complete all as specified and directed. | 10 | EACH | |
| 72 | 72 | S&F for 100mm dia Cast iron Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door complete all as specified and directed. | 12 | EACH | |
| 73 | 73 | S&F for 75mm dia Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door etc complete all as specified and directed. | 10 | EACH | |
| 74 | 74 | S&F in repair 75mm dia Cast iron Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed. | 8 | EACH | |
| 75 | 75 | S&F for 100mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed. | 16 | EACH | |
| 76 | 76 | S&F for 100mm dia cast iron cowls complete all as specified and directed. | 6 | EACH | |
| 77 | 77 | Taking down chowkhats with shutters (without taking off shutters from the frame) area not exc 1.5 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed by Engineer-in-Charge. | 66 | EACH | |
| 78 | 78 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exc 4 Sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed by Engineer-in-Charge. | 40 | Each | |
| 79 | 79 | S&F for Steel windows or ventilators, fixed type, with glazing bars complete all as specified and as directed. | 16 | Sqm | |
| 80 | 80 | S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded etc complete all as specifed and directed. | 84 | Sqm | |
| 81 | 81 | S&F factory made PVC door frame of size 100mmx45mm (minimum) with a wall minimum thickness of 5mm made out of extruded PVC sheet of density 600 Kg/Cum manufacturers by an ISO-90000 centrifuged company and jointing 3 number heat pent PVC sheet section. The inside section of minimum size 90x30mm shall be made from plain coloured PVC sheet of 5mm (minimum) thickness, the inside section will be covered by sticking tow long brackets of + 5mm & 15mm mild steel square tube the two vertical door frame made of 5mm thick plain colour PVC sheet reinforced with mild steel square tube the vertical door frame are to be reinforced with (minimum) 40mmx20mm mild steel of 19 gauge (minimum) through out the frame the door frame shall be fixed to wall using 8/100mm long mild steel screws through the frame by using and or fastener . A minimum of 04 number of screw to be provided for each vertical member and two number for horizontal members etc complete as per manufacturer's specification and as specified and shown in drawing No CWE/BAM/TD/40 sheet No 1/3 & 3/3. \nNote :-(i) Gap in between frame and wall /lintle shall be filled properly with suitable materials as per manufacturers instruction to avoid cracks afterwords. (ii) Colour & design shall be as approved by GE. \n | 218 | RM | |
| 82 | 82 | S&F 30mm thick factory made solid panel prelam PVC door shutter consisting of frame made out of M.S. tubes of 19 guage thickness (minimum) and minimum size of 40mm x 20mm for stiles as well as top, lock & bottom rail. M.S.Frame shall have a coat of metal primer of approved make or as per manufacturer instruction, mild steel frame shall be covered with head moulded prelam 'C' channel made from 5mm (minimum) thick PVC sheet of density 600Kg/Cum manufactured by an ISO-90000 certify company 110mm (minimum) width forming stiles in which 100mm (minimum) should be flat and 5mm should be tappered and 5mm thick 135mm (minimum) width PVC rigid sheet for top rail and bottom rail in which 125mm should be flat and 5mm tipper on either sides of panel also for lock +5mm (minimum) sheet, 125mm should be flat and 5mm tipper on either sides of panel also for lock +5mm (minimum) sheet, 125mm should be flat and 5mm tapper on other sides. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior sides of 'C' channel using PVC solvent cement adhesive, panelling of 10mm thick prelam PVC sheet to be fitted in the frame /sealed to the stiles and rails with 30mm wide and 5mm (minimum) thick PVC sheet beading on either side complete as per direction of Engineer-in-Charge, manufacturer's specifications and shown in drawing No CWE/BAM/TD-40 sheet No 1/3. \nNote :-Frame for binder hardware shall be measured and paid for seperatly under respective item of the Schedule of works. | 68 | Sqm | |
| 83 | 83 | S&F exturude aluminium butt hinges size 100mm with galvanised mild steel hinges pin anodised and fixed type B-21/22 complete all as specified and directed. | 132 | Each | |
| 84 | 84 | Supply and fixing aluminium alloy anodised sliding door bolt 300mm length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | 4 | Each | |
| 85 | 85 | S&F aluminium anodised barrel tower bolt 150mm of extruded section and fixed complete all as specified and directed. | 88 | Each | |
| 86 | 86 | Supply and fixing aluminium handle cast type anodised of size 150 mm complete all as specified and directed. | 88 | Each | |
| 87 | 87 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. | 100 | Sqm | |
| 88 | 88 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. | 44 | Sqm | |
| 89 | 89 | S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed. | 180 | Sqm | |
| 90 | 90 | Supply only 3mm thick figured glass pin head type in square n exc 0.5 Sqm in each pane all as specified and directed. | 24 | Sqm | |
| 91 | 91 | Supply only 3mm thick sheet glass ordinary quality in square n exc 0.5 Sqm in each pane all as specified and directed. | 20 | Sqm | |
| 92 | 92 | S&F 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 Sqm in each pane including hacking out old broken glass all as specified and directed. | 40 | Sqm | |
| 93 | 93 | S&F fancy type PVC coated curtain rod 20mm dia etc complete all as specified and directed. | 260 | RM | |
| 94 | 94 | S&F PVC coated curtain rod brackets and side stoper etc complete all as specified and directed. | 160 | Each Pairs | |
| 95 | 95 | M&L in repair handle for steel window complete all as specified and directed. | 25 | Each | |
| 96 | 96 | M&L in repair stay for steel window complete all as specified and directed. | 60 | Each | |
| 97 | 97 | M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in filling on holes in walls, bed block for inserting hold fast and coping including necessary form work complete all as specified and directed. Note:- The rate is deemed to be inclusive of form work. | 1.8 | Cum | |
| 98 | 98 | M&L for PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregates as in roof kerbs, Chajja or mud stops, rounded or chamfered on edges, complete all as specified and directed. Note:-The rate is deemed to be inclusive of form work. | 2 | Cum | |
| 99 | 99 | S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. | 800 | Kg | |
| 100 | 100 | M & L for Water proofing treatment to sunken portion of WC by apply cement slurry to the surface @ 0.488 Kg/Sqm of cement mixed with acrylic based polymer cementious composite compound @ 0.253 Kg/Sqm and surface will be allowed to air cure for 4 hours apply another layer of cement slurry @ 0.242 Kg/Sqm of cement mixed with acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sqm and the surface will be allowed to air cure for 4 hours of area exc 1.00 Sqm and n. exc 2.00 Sqm incl reflxing of flushing cistern/half turn valve complete all as directed. | 20 | Sqm | |
| 101 | 101 | M&L for taking down cement plaster incl tile etc and removing the material out side MD land.& hacking out and racking out the joints with the wire brush to dry and apply one coat of URP and cement in ratio 1:1 @ 1liter per Sqm. After the drying of this process two coat of pidifin2K @ 01 liter on each coat min 4 hour gap is required and 15 mm thick rendering in CM 1:4 complete incl finished even & smooth without using extra cement all as directed.Note: Make of chemical to Dr.Fixit.Gauranty to be required from the Dr Fixit. | 60 | Sqm | |
| 102 | 102 | Dismantling Bricks (laid flat or on edge) or brick tiles in floors, channels,\nkerbs, aprons, etc. (each layer) laid dry or laid dry and pointed complete all as specified and as directed. | 28 | XSqm | |
| 103 | 103 | M&L for 30mm thick sand cushion below inter locking paving tiles including spreading, levelling and compaction complete all as specified. | 8.4 | Cum | |
| 104 | 104 | M&L for Machine pressed precast concrete interlocking Colour paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade laid over sand complete etc all as specified and directed. | 280 | Sqm | |
| 105 | 105 | S&F pre-cast Kerb stone of size 300x450x100mm with PCC (1:2:4) (using 20mm graded crushed stone aggregate) including champherd, rounded etc. complete all as specified and directed. | 160 | Each | |
| 106 | 106 | S&F 150mm bore of pipe for Reinforcement concrete pipes, class NP3, laid and jointed complete with collars etc complete all as specified and directed. | 7 | RM | |
| 107 | 107 | M&L for non skid pavement coloured tiles 300x300x10mm thick (Square/rectangular) joint free as in footh path, porch and floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles inclduing 20mm thick screed bed layer in CM (1:6) complete all as specified and directed. | 80 | Sqm | |
| 108 | 108 | Demolition of RCC in ground floor and paving n exc 15 cm thick (below or above ground level complete all as directed by Engineer –in-charge. | 4 | Cum | |
| 109 | 109 | M&L brick work with sub class ‘B’ old size bricks straight or curved on plan exc 6 M mean radius built in CM (1:6) complete all as specified and directed | 16.72 | Cum | |
| 110 | 110 | M&L extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred stopped ends complete all as spcified and as directed. | 80 | RM | |
| 111 | 111 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto | 10 | RM | |
| 112 | 112 | M&L for 15 mm thick rendering in CM (1:4) on external surface fair faces of brick wall finished even and smooth without using extra cement etc complete all as specified and directed. | 124.8 | Sqm | |
| 113 | 113 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in filling on holes in walls, bed block for inserting hold fast and coping including necessary form work complete all as specified and directed.Note:- The rate is deemed to be inclusive of form work. | 1.472 | Cum | |
| 114 | 114 | M&L for precast cement concrete (1: 2: 4) type B-1 using 20 mm graded stone aggregate as in manhole covers, with plain fair faces including chamfers, weathering throat-ing etc and set and jointed in cement mortar (1:4) complete to match including necessary form works complete all as specified and directed. | 5 | Cum | |
| 115 | 115 | M & L for TMT bars 8 mm dia and over cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as directed. | 535 | KG | |
| 116 | 116 | Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and n. exc 1.5 mtr in depth for foundation etc or for shafts wells manholes etc n. exc in 10 sqm on plan and getting out complete all as specified and directed. | 43.45 | Cum | |
| 117 | 117 | Returning, filling in, foundation / trenches including spreading, levelling, watering and well ramming in layers n exc 25 cm complete all as directed by Engineer-in-charge. | 7.45 | Cum | |
| 118 | 118 | Removing surplus excavated soil/materials to a distance not exc 500 mtr and depositing where directed at a level n exc 1.5 mtr from the starting point complete all as directed by Engineer-in-charge. | 16 | Cum | |
| 119 | 119 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in benching and coping / bed block of manholes etc. including necessary form work complete all as specified and directed. | 0.3588 | Cum | |
| 120 | 120 | M&L for 15 mm thick rendering in CM (1:4) on external surface other than fair faces of brick wall etc finish the surface fair and even complete all as specified and directed. | 15 | Sqm | |
| 121 | 121 | Cutting into existing manholes, brick wall (ground/first floor) for connecting new drain pipe/bend/Tee of 150mm sizes and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (½ round or ¾ section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required for following internal dia of pipe complete all as directed by Engineer-in-Charge. | 4 | Each | |
| 122 | 122 | Supplying, laying and testing of Reinforced concrete pipes of 150mm dia, class NP3, laid and jointed complete with collars etc all as specified and as directed. | 27 | RM | |
| 123 | 123 | M&L for concrete bed to drain pipes of 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate including necessary shuttering and supports to concrete and for laying bends to falls complete all as specified and directed . | 26.6 | RM | |
| 124 | 124 | Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. Complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings. Note :- (i) Contractors quoted rate of this item deemed inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) Quoted rate also deem to be included cost of cutting chases for taking out concealed conduit and nitch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixture. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule. | 448 | Per point | |
| 125 | 125 | M & L for point wiring for One light/fluorescent tube light/fan/bell point controlled by one switch single pole one way.with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm with stranded copper conductor 1100 volts grade drawn into and incl rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly incl CI/MS boxes 1.6 mm thick with two coats of anticorrosive paint outside and aluminum paint inside sunk in wall with 3 mm thick laminated bakelite Hylam/Arkay light brand sheet cover (white) for mounting of switches, sockets and switch sockets, regulators as required complete all as specified and directed for the following Note :- The rates of chase cutting on wall concealing conduit and steel terminal boxes are included in the unit rates. | 250 | Per point | |
| 126 | 126 | ditto all as per item No. 125 here-in-before but one 3 pin 5 amp switch socket out let on independent board . | 120 | Per Point | |
| 127 | 127 | ditto all as per item No. 125 here-in-before but one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed by engineer incharge.. | 30 | Per Point | |
| 128 | 128 | ditto all as per item No. 125 here-in-before but one 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane | 30 | Per Point | |
| 129 | 129 | ditto all as per item No. 125 here-in-before but using 02 Nos. 4.0 sq mm size for main cable and 01 No.4.0 sq mm size as earth conductor for one 16 amp switch socket outlet on independent board. | 18 | Per Point | |
| 130 | 130 | Supply & fix switch piano flush type, single pole one way, 5 Amp complete all as specified and directed . | 430 | Each | |
| 131 | 131 | S&F socket out let 2/3 pin 5 Amps 240 volt flush type complete all as specified and directed . | 180 | Each | |
| 132 | 132 | Supply & fix socket outlet 3 pin, 15 amp 240 volt 50 Htz complete all as specified and directed . | 18 | Each | |
| 133 | 133 | Supply and fix switch piano 15 Amp 240 volt 50 Htz complete all as specified and directed. . | 18 | Each | |
| 134 | 134 | S & F ceiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. | 242 | Each | |
| 135 | 135 | Supply and fix in replacement Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.\n(b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish. | 200 | Per Running Metre | |
| 136 | 136 | Supply and fix wall mounted LED batten with aluminium housing provided for heat dissipation & intigrated electronic driver with polycarbonate diffuser 4 feet long 22 watt 240 volt prewired dimension (1182x23x37mm) Havells cat part No-ENDURALINEARNEOBS22WLED865SPCWH or equivalent Syska and crompton | 200 | EACH | |
| 137 | 137 | Supply and fix wall mounted LED batten with aluminium housing & intigrated electronic driver 2 feet long 10 watt 240 volt prewired dimension (600x108x62mm) Havells cat part No-LUMILINEPLUSBS10WLED865SPCSS or equivalent Syska and crompton | 50 | Each | |
| 138 | 138 | supply and fix connecting and testing LED street light 25 watt 5500k to 6000k new generation energy saving and enviornmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting. Make:- Havells cat part No-ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent Syska and crompton | 6 | Each | |
| 139 | 139 | Supply and fix Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, complete all as specified and directed. \nNote : MCBs shall be measured and paid for separately under respective item of this schedule. | 6 | EACH | |
| 140 | 140 | Supply and fix Factory made sheet metal enclosure distribution boards, (protection class IP-42) double door, verticle type suitable for mounting MCCBS/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and directed.\nNote :- MCBs and MCCB shall be measured and paid for separately under respective item of this schedule. | 2 | EACH | |
| 141 | 141 | Supply and fix MCCB, four pole, 415 Volt ,125 Amp rating, 25 KA ultimate breaking capacity fixed in DBs catered herein before complete all as specified and directed . | 2 | EACH | |
| 142 | 142 | Supply and fix MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before complete all as specified and directed . | 100 | EACH | |
| 143 | 143 | Supply and Fix MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs catered herein before complete all as specified and directed . | 30 | EACH | |
| 144 | 144 | Supply and fix MCB, single pole and neutral, 230 volts, 35 to 60 Amp rating, 'C' series fixed in DBs catered here-in-before complete all as specified and directed . | 6 | EACH | |
| 145 | 145 | M & L for Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I\n(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. | 2 | EACH SET | |
| 146 | 146 | Supply and fixing in replacement of Exhaust fan, copper wound winding of 380mm sweep,1400 RPM, 230 volts,50 Hz, single phase complete with louvers, clamps, nuts and bolts and fan blades of suitable size all as specified and directed :Make :Havells Model No Turbo Force SP/Bajaj (or) Equivalent in Usha/CG including dismantling the defective ceiling fans from site and shiting the same to MES store yard.\n | 8 | Each | |
| 147 | 147 | Taking down the geyser from existing position after disconnecting electrical and water supply connection with out any damage for repair/general cleaning/overhauling,two coat of synthatic enamel paint, cleaning and descaling the inner tank and assembly with suitable chemical/detergent and making the geysers fully serviceable and refixing the same in new/old position and testing complete all as specified and directed.Note : | 8 | Each Job | |
| 148 | 148 | Supply and erecting ceiling fan 1200mm sweep with all standard accessories and necessary materials, erected in provided hook/clamp. Material : ceiling fan : electric Ceiling fan capacity type with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackeles, reel insulator, half threaded bolts of 9.53mm (3/8\") dia 62.5 mm (2-1/2\") to 88mm (3-1/2\") long and 7.94 mm (5/16\") dia 44.5 mm (1-3/4) to 57 mm (2-1/4\") long with nuts, with lock type split pin spring & plate washers etc, three number blade made of Aluminium alloy suitable for single phase, AC 210 volts, 50 Hz supply and conforming to class I to IS : 374/1979 with amendment no 1 to 6 expect for performance parameters to the extent modified as details in general requirements , the down rod shall be capable to withstand a tensile load of 1000 kg without break down and a torsion load of 500 kgcm without breakage as per clause 10.14.1 of IS : 374/1979 with amendment no 1 to 6 Eletrical motor should be single phase permanent capacitor type with no. of pole 12/14/16/18(as per sweep). Class-1 wih basic insulation. class of insulation shall be B class. The binding wire used for fan should be copper wire, synthetic enameled of 30 to 38 SWG. Connection wire : Flat/round two core flexible stranded copper wire cord 23/0.2 mm ISI marked. Paint superior quality enamel paint of specified colour for marked Sr . No and date of erection of 1200mm sweep, maximum input power 50 watts air delivery 215 cubic meter per minute Make USHA/CROMPTON GREAVES/HAVELLS/BAJAJ/ORIENT.Old unsv fan will be deposited in MES store | 40 | Each | |
| 149 | 149 | Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed . | 8 | Cum | |
| 150 | 150 | Supply and lay river bed sand for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . | 7 | Cum | |
| 151 | 151 | Supply and lay old size brick well burnt, laid flat ,for cable protection complete all as specified and directed. | 700 | Each | |
| 152 | 152 | Material and labour for replacement of GI tubing light grade 50 mm bore for passing cables under the floor ,along the wall or along the pole complete all as specified and directed . . | 23 | RM | |
| 153 | 153 | Supply and laying in trenches of XLPE Insulated galvanised steel strip armoured electric power cables(heavy duty)1100 volts grade withstranded aluminium conductor of size 25 Sqmm 3.5 Core complete all as specified and directed . | 150 | RM |
AI Tender Summary
Tender Timeline
Oct 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 24, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 26, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender