Providing And Fixing Cobra Wire Inside The Bs Fencing Phase 3Rd In Aor Of 114 Bn Bsf Bikaner Raj Providing And Fixing Cobra Wire Inside The Bs Fencing Phase3rd In Aor Of 114 Bn Bsf Bikaner Raj
Tender Value
24.49 Lakhs
Estimated cost
Bid Submission
16 Oct 2020
0 days left
EMD
48984
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KHAJUWALA → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Cobra Wire Inside The Bs Fencing Phase 3Rd In Aor Of 114 Bn Bsf Bikaner Raj Providing And Fixing Cobra Wire Inside The Bs Fencing Phase3rd In Aor Of 114 Bn Bsf Bikaner Raj
BOQ
| Name of Work: < Providing and fixing cobra wire inside the BS fencing (3rd Phase) in AOR of 114 BN BSF under SHQ BSF (Raj).> | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Providing and fixing 300 mm long bracket fabricated from angle iron 25 mm x 25 mm x 3 mm on the existing border fence angle iron post complete with G.I. bolt, nut and washer, including painting with one coat primer and two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture, including providing and fixing bobbin insulator of size 40 mm x 30 mm (nominal size) at one end of bracket with GI nut, bolt and washer, drilling of holes etc as required compete. (as per drawing provided by the Engineer in charge) | Item65 | 3060 | Each |
| 2 | 2 | Providing and fixing 450 mm long bracket fabricated from angle iron 25 mm x 25 mm x 3 mm on the existing border fence angle iron post complete with two nos. G.I. bolts, nuts and washers, including painting with one coat primer and two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture, including providing and fixing bobbin insulator of size 40 mm x 30 mm (nominal size) at one end of bracket with GI nut, bolt and washer, drilling of holes etc as required compete. (as per drawing provided by the Engineer in charge) | Item66 | 6120 | Each |
| 3 | 3 | Providing and fixing 600 mm long bracket fabricated from angle iron 25 mm x 25 mm x 3 mm on the existing border fence angle iron post complete with two nos. G.I. bolts, nuts and washers, including painting with one coat primer and two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture, including providing and fixing bobbin insulator of size 40 mm x 30 mm (nominal size) at one end of bracket with GI nut, bolt and washer, drilling of holes etc as required compete. (as per drawing provided by the Engineer in charge) | Item67 | 6120 | Each |
| 4 | 4 | Supplying and erection of 2.59 mm dia G.I. High tensile wire with minimum of 230 gms/sq.m zinc coating on existing bobbin insulators fixed on B.S. fence, including binding with 2 mm dia aluminium wire etc. as required. ( G. I. wire Confirming to IS: 398 -Part II ) | Item68 | 72 | Km |
| 5 | 5 | Supplying and fixing weather proof thermoplastic indicator box size 217 mm x 253 mm x115mm with transparent hinged lid, including providing and fixing following accessories, inter-connections with 1.5 sq. mm FRLS PVC insulated copper conductor cable, including one 40x3mm MS flat clamp with nuts, bolts and washers duly painted, fixing indicator box on existing Angle iron post etc complete as required. (make : box Hensel Catalog No. KG 9003)\ni) DIN Rail for five MCBs with fastening screws. 1 No\nii) MCB 'C' series 10KA, 1 amps. Make : C&S/ L&T/ Legrand /ABB / Havells/ Siemens 4 Nos\niii) MCB 'C' series 10KA, 10 amps. Make : C&S/ L&T/ Legrand/ Havells /ABB/ Siemens 1 Nos\niv) Mounting plate 180 mm x 136 mm made 3 mm thick phenolic laminated sheet with fastening screws including cutting to required shape. 1 No\nv) LED indicator 240 V. make : C&S/ L&T/ Legrand/ HPL/ Havells. 4 Nos\nvi) Cable entry Grommets 2 nos Hensel ESM 25 and 1 no Hensel ESM 32 | Item69 | 36 | Each |
| 6 | 6 | Supplying and fixing 2.5 sq. mm lSI marked, FRLS PVC insulated, single core copper conductor cable on the wall / open for connection form indicator box to bare GI conductor etc. as required.\nMake: Havells / Polycab / L&T / RR Kabel | Item70 | 360 | meter |
| 7 | 7 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. \ni) 63 mm dia (OD-63 mm & ID-51 mm nominal) | Item71 | 300 | meter |
| 8 | 8 | Supplying and Laying of 2 X10 sq. mm size one number aluminium conductor, XLPE Insulated, PVC sheathed, unarmoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing DWC HDPE /RCC/ HUME/ METAL pipe as required. (ISI marked Make Havells /Polycab/ Finolex /CCI /KEI /RR Kabel) | Item72 | 300 | meter |
| 9 | 9 | Supplying and Laying of 2 x 10 sq. mm size one number aluminium conductor, XLPE Insulated, PVC sheathed, unarmoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct/ along surface/loose for connection etc as required. | Item73 | 90 | meter |
| 10 | 10 | Supplying and fixing bakelite terminal block of follwing size on the existing box/ switch board including connection etc as required. (i) Terminal block, 2 way, 30 A, | Item74 | 36 | Each |
| 11 | 11 | (ii) Terminal block, 4 way, 30 A, | Item75 | 36 | each |
| 12 | 12 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) | Item76 | 540 | meter |
| 13 | 13 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. | Item77 | 36 | meter |
| 14 | 14 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of double poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. C&S/ L&T/ Legrand /ABB / Havells | Item78 | 36 | Each |
| 15 | 15 | Supplying and fixing 3mm thick phenolic laminated sheet cover with with fastening screws in existing switch Box / indicator box including cutting the laminated sheet to required shape and size complete etc as reqd. | Item79 | 5030 | sq cm |
| 16 | 16 | Providing and fixing bottle type bobbin insulator of size 45 mm x 35 mm (nominal size) with GI nut, bolt and washer, on existing angle iron bracket including drilling of holes etc complete as required. | Item80 | 72 | Set |
| 17 | 17 | Supplying and laying of G.I. pipe of 20 mm dia.(nominal), light class, ISI marked on surface with G.I. clamps etc as required. ( for protection of UG cable)Supplying and laying of G.I. pipe of 20 mm dia.(nominal), light class, ISI marked on surface with G.I. clamps etc as required. ( for protection of UG cable) | Item81 | 54 | meter |
| 18 | 18 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. | Item82 | 180 | Each |
| 19 | 19 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Item83 | 80 | Kg |
| 20 | 20 | Supplying and fixing Panel Mounted Buzzer 22.5 mm, 240 V AC, on the existing switch box/ cover including connections etc. as required. C&S/ L&T/ Legrand/ HPL/ Havells/esbee. | Item84 | 36 | Each |
| 21 | 21 | Supplying and fixing DIN rail suitable for fixing DP MCB in the existing looping box etc. as required. | Item85 | 36 | Each |
AI Tender Summary
Tender Timeline
Oct 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender