| 1 | 1 | Kirloskar make of Model SP3A 3.7 KW pump with FLP motor ( Mechanical seal type) | B100 | 3 | EA |
|---|
| 2 | 2 | Kirloskar make of Model SP2A 2.2 KW pump with non - FLP motor (mechanical seal type) | B101 | 2 | EA |
|---|
| 3 | 3 | SQUARE SHAPE INDUCED DRAFT COUNTER FLOW FRP cooling tower with water distribution spray system, pvc fills packed, fan directly connected to the motor and with water holding basin. Cooling Tower Type: Induced Draft – Counter Flow.Tower Model: EEE – DFAO – 4074, Overall Dimensions: 1,250 mm x 1250 mm x 1,800 mm - Ht, No. of Cell: ONE, Inlet & Outlet Connection: 2” – Flanged. MOTOR (1 H.P FLP / FAN DIA : 1.0 / 750 mm, Fasteners : S.S.304 | B102 | 2 | EA |
|---|
| 4 | 4 | 3\" ERW medium class pipe #150 (IS:1239) | B103 | 18 | M |
|---|
| 5 | 5 | 2\" ERW medium class pipe #150 (IS:1239) | B104 | 12 | M |
|---|
| 6 | 6 | 3\" MS flanged end ball valve #150 | B105 | 10 | EA |
|---|
| 7 | 7 | 2\" MS flanged end ball valve #150 | B106 | 6 | EA |
|---|
| 8 | 8 | 2\" MS flanged end non return valve #150 | B107 | 6 | EA |
|---|
| 9 | 9 | 3\" MS TEE #150 (IS:1239 part - II) | B108 | 10 | EA |
|---|
| 10 | 10 | 3\" MS Elbow #150 (IS:1239 part - II) | B109 | 10 | EA |
|---|
| 11 | 11 | 3\" flanges socket weld type( #150 ANSI BN16.5) | B110 | 20 | EA |
|---|
| 12 | 12 | 2\" TEE #150 (IS:1239 part - II) | B111 | 6 | EA |
|---|
| 13 | 13 | 2\" Elbow #150 (IS:1239 part - II) | B112 | 12 | EA |
|---|
| 14 | 14 | 2\" flanges socket weld type (#150 ANSI BN16.5) | B113 | 20 | EA |
|---|
| 15 | 15 | Supply of strainer at pump suction | B114 | 2 | EA |
|---|
| 16 | 16 | Structural support | B115 | 3400 | KG |
|---|
| 17 | 17 | 3\"x12 MS Barrel nipple with threaded | B116 | 4 | EA |
|---|
| 18 | 18 | 5/8\" x 2\" MS bolt nut with washer (material class: IS 1367 , CLASS 4.6/4 , dimensions class: IS 1363, #150 ) | B117 | 98 | EA |
|---|
| 19 | 19 | 4mm metal gasket (ANSI B 16.21, #150) | B118 | 50 | EA |
|---|
| 20 | 20 | Supply of LPG CS pipe (Material: ASTM-A-106 Gr.B SMLS) B36.10, PE 1\", Sch 80 | B119 | 375 | M |
|---|
| 21 | 21 | Supply of LPG CS pipe (Material: ASTM-A-106 Gr.B SMLS) B36.10, PE 2\", Sch 80 | B120 | 12 | M |
|---|
| 22 | 22 | Supply of CS Weld Neck -RF,FLANGES ASME B16.5, 1\" , 300#, sch80 | B121 | 150 | EA |
|---|
| 23 | 23 | Supply of CS Weld Neck -RF,FLANGES ASME B16.5, 2\" , 300#, sch80 | B122 | 20 | EA |
|---|
| 24 | 24 | Union - 1\" Socket Weld, ASME B16.11 #3000 | B123 | 25 | EA |
|---|
| 25 | 25 | Tee - 1\" Socket Weld, ASME B16.11 #3000 | B124 | 88 | EA |
|---|
| 26 | 26 | 90 deg Elbow - 1\" Socket Weld, ASME B16.11 #3000 | B125 | 24 | EA |
|---|
| 27 | 27 | E&C Kirloskar make of Model SP3A 3.7 KW pump with FLP motor ( Mechanical seal type) | B126 | 2 | EA |
|---|
| 28 | 28 | E&C Kirloskar make of Model SP2A 2.2 KW pump with non - FLP motor (mechanical seal type) | B127 | 2 | EA |
|---|
| 29 | 29 | E&C of SQUARE SHAPE INDUCED DRAFT COUNTER FLOW FRP cooling tower | B128 | 2 | EA |
|---|
| 30 | 30 | E&C of 3\" medium class ERW pipe #150 (IS:1239) | B129 | 18 | Mtr |
|---|
| 31 | 31 | E&C of 2\" medium class ERW pipe #150 (IS:1239) | B130 | 12 | Mtr |
|---|
| 32 | 32 | E&C 3\" Class 150 flanged end ball valve | B131 | 10 | EA |
|---|
| 33 | 33 | E&C 2\" Class 150 flanged end ball valve | B132 | 6 | EA |
|---|
| 34 | 34 | E&C 2\" Class 150 flanged end non return valve | B133 | 6 | EA |
|---|
| 35 | 35 | Dismantling of existing cooling towers, four number service water pumps with allied piping and disposal of the same to un objectionable Place - includes dismantling of pipelines, fittings like flanges, check valves, elbows, bends,\nsockets union nipples etc, including cutting, if required, as per site conditions. | B134 | 2 | LS |
|---|
| 36 | 36 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil & disposal of surplus excavated soil as directed, within or outside the site at an unobjectionable place - ordinary rock | B135 | 114.6 | M3 |
|---|
| 37 | 37 | PCC work upto plinth level - 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) | B136 | 85.1 | M3 |
|---|
| 38 | 38 | RCC work upto plinth level - 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm | B137 | 15 | M3 |
|---|
| 39 | 39 | Centering and Shuttering for RCC/PCC - Foundations,footings,bases of columns, etc. for mass concrete | B138 | 66.3 | SQM |
|---|
| 40 | 40 | Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 | B139 | 848.3 | KG |
|---|
| 41 | 41 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement: 3 coarse sand) finished rough with sponge. | B140 | 71.8 | SQM |
|---|
| 42 | 42 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars & disposal of unserviceable material outside site to an unobjectionable place as/ direction of Engineer-in-charge | B141 | 8.3 | CUM |
|---|
| 43 | 43 | Reinforcement cutting manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge | B142 | 20.7 | M2 |
|---|
| 44 | 44 | Fabrication - LPG CS pipe & supports (Material: ASTM-A-106 Gr.B SMLS) B36.10, PE, Sch 80 - incl. cutting, welding, painting, elbows, tees, reducer, valves and fittings for all height and elevations | B143 | 399 | ID |
|---|
| 45 | 45 | Erection - LPG CS pipe (Material: ASTM-A-106 Gr.B SMLS) B36.10, PE, Sch 80 - incl. cutting, welding, painting, elbows, tees, reducer, valves and fittings for all height and elevations | B144 | 399 | IM |
|---|
| 46 | 46 | Handling and welding - CS Weld Neck -RF,FLANGES ASME B16.5, 1\" , 300#, sch80. The flange joint shall also include supply & fixing of copper jumpers\n(using 30mm wide and 6 mm thk. GI strip)for bonding of joint. Rate also included supply of Nuts (ASTM A194-2H), Studs (ASTM\nA193B-7) and gaskets (SS 316 with Graphite fill as per\nASME B16.20) for LPG line 300# | B145 | 300 | EA |
|---|
| 47 | 47 | Handling and welding - CS Weld Neck -RF,FLANGES ASME B16.5, 2\" , 300#, sch80. The flange joint shall also include supply & fixing of copper jumpers\n(using 30mm wide and 6 mm thk. GI strip)for bonding of joint. Rate also included supply of Nuts (ASTM A194-2H), Studs (ASTM\nA193B-7) and gaskets (SS 316 with Graphite fill as per\nASME B16.20) for LPG line 300# | B146 | 96 | EA |
|---|
| 48 | 48 | Removal of existing GI vent lines - Dismantling of pipelines, fittings like flanges, check valves, elbows, bends,\nsockets union nipples etc, including cutting, if required, as per site conditions. | B147 | 315 | IM |
|---|
| 49 | 49 | Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH | B148 | 5 | M3 |
|---|
