Supply Of Kitchen Equipments To The Multipurpose Community Hall At Kottai Jalalkhan Street In Division No 31 Zone 2 Salem Corporation Supply Of Kitchen Equipments To The Multipurpose Community Hall At Kottai Jalalkhan Street In Division No 31 Zone 2 Salem Corporation-2 1. Square Boiler 3 24 x 24 x 40 Operated by Gas. Outer Shells are made of 6mm MS Plate. It is Covered by 304 Grade 18SQG SS Sheet paneling. Specialist equipment in installed to economic gas consuption. It is fitted with automatic float valve, assembly, safety valve, pressure gauge meter, water level indicator and drainage valve. It is mounted on MS Stand. 4 2. MS Stand (Gas) 5 For Steam Generator 6 3. Rice Vessel - 30 Kg 7 Made out of 16 SQG 304 grade SS Sheet with lid, tilting handle, side suppot U clamp. It can be mounted on SS Stand. 8 4. Iddly Plant (Delux) - Cap 240 Nos 9 This Unit is divided with 4 chambers. This is mounted on SS stand. Racks will be provided underneath to keep idly plates. Idly will be steam cooked within 5 to 7 Mts. Heat resistance door with auto steam injection. Each tray having 20 iddlies. Total tray is 12 Nos 10 5. SS Stand for Vessel & Iddly Plant 11 SS Square Pipe ligs 12 6. Work Table - 4 Ft x 2 Ft with US 13 O.A.S: 1200x600x850mm, Top: Made out of 304 grade 16 SWG SS Sheet, US: 1No. Legs: 16 SWG, 11/2 SS Pipe legs with Adjustable bnylon boots. 14 7. Batter Stand-4 15 O.A.S: 750x450x850mm, Top: Made out of 16 SWG SS Sheet, Container: 2Nos. Made out of 20SWG SS Sheet each. Legs: 16 SWG, 11/2 SS Pipe legs with Adjustable bnylon boots. 16 8. Dosa Plate - 5 x 2.5 Feet 17 O.A.S: 1500x750x850 Top: 16mm TK MS Plate top. Mounted on MS Angle Structure. Panelling: 304 grade 18 SWG SS Panelling, 6 splash on 3 sides with drainage system. Attachment : 03 No V shape burners, 3 No Nc-Valve. Legs: 16 SWG 11/2 OD SS pipe legs. 18 9. Work Tabke: 5 Ft x 2 Ft US 19 O.A.S: 1500x600x850mm+150mm. Top: Made out of 304 grade 16 SWG SS Sheet, US: 1No. Legs: 16 SWG, 11/2 OD SS Pipe legs with Adjustable bnylon boots. 20 10. Work Tabke: 5 Ft x 2 Ft US 21 O.A.S: 1500x600x850mm. Top: Made out of 304 grade 16 SWG SS Sheet, US: 1No. Legs: 16 SWG, 11/2 OD SS Pipe legs with Adjustable bnylon boots. 22 11. Single Burner Range 23 O.A.S : 600x600x850mm, Frame: 1¼ x 1¼ MS Angle Frame, Top : Made out of 304 Grade 16SWG SS sheet, 18SWG SS side paneling on 04 sides. Pan support : 02 No fancy cast iron pan support. Attachment : 01 No Burner, Nc- Valve, Legs : Made out of 1½” OD 16SWG SS pipe legs With adjustable bullet legs. 24 12. Two Burner Range 25 O.A.S : 1200x600x850mm, Frame: 1¼ x 1¼ MS Angle Frame, Top : Made out of 304 Grade 16SWG SS sheet, 18SWG SS side paneling on 04 sides. Pan support : 02 No fancy cast iron pan support. Attachment : 02 No Burner, Nc- Valve, Legs : Made out of 1½” OD 16SWG SS pipe legs With adjustable bullet legs. 26 13. Bulk Cooking Range for URLI - 3 in 1 27 O.A.S : 750x750x350mm, Top : Made out of 304 Grade 16SWG SS sheet, 18SWG SS side paneling on 04 sides. Frame: 1¼ x 1¼ MS Angle Frame, Pan support : 24 fancy cast iron pan support. Attachment : 03 No Burner, Nc- Valve, Legs : Made out of 1½” OD 16SWG SS pipe legs With adjustable bullet legs. 28 14. POT Rack - 03 Tier - 5Ft 29 O.A.S : 1500x600x1500mm, Top : Made out of 304 Grade 16SWG SS 25mm Pipe cross support, Verticals: 16 SWG 40mm OD SS pipe legs with Adjustable nylon boots. 30 15. Steam Pipe Line Accessories 31 3/4 GI Pipe and MS Fittings 32 16. 7.5 HP Blower with Motor 33 Supply of Centrifugal blower having capacity of 6470cfm, 11000 CMH at 125mm WG static pressure to suit 7.5HP / 1440 RPM 3ph ISI Motor Make: Kirloskar. 34 17. Anti Vibration Mounting 35 Vibration Boot for Blower 36 18. DOL Starter 37 DOL Starter 38 19. Exhaust Hood - 5 Feet 39 Exhaust Hood: 60 x 36 x 18 40 20. Exhaust Hood - 6 Feet 41 Exhaust Hood: 72 x 36 x 18 42 21. Exhaust Ducting 43 Suppot of ducting made out of GI Sheets: per Sq.ft. Rs. 185/- 22/24 SQG MS flanges for blower inlet and outlet. 44 22. SS Filters 45 SS Filetrs 46 23. Work Tabke: 6 Ft x 2.5 Ft with US 47 O.A.S: 1800x750x850mm. Top: Made out of 304 grade 16 SWG SS Sheet, US: 1No. Legs: 16 SWG, 11/2 OD SS Pipe legs with Adjustable bnylon boots. 48 24. Gas Pipe line Fittings 49 Having 10 cylinders (5+5) Manifolding system with D.B.C. Clicking on H.P. Regulator, Connector, Shut off valves, with frame connector and the cost of 1/2 x 3/4 M.S. c class pipe line pin set clamps, etc., including the charges for pipe bending, welding, painting, pressure testing and all connected labour charges. 50 25. Tilting Wet Grinder - 10 liter - MOSTRO 51 Motor Capacity: 1 HP Motor - Heavy Duty 3 3P Used to grind pulses, grains and various food materials. 52 26. Conventional Wet Grinder - 5 Liters - MOSTRO 53 0.5 HP - Heavy Duty, Features: Stainless Steel Drum, Motor and gear box covered with Stainless sheets, MS Bottom frame, Hard chrome plating for the arm ste. 54 27. Coconut Scrapper - MOSTRO 55 0.5 HP Mostro Motor, 2 Min 8 Kg 56 28 Atta Kneader - 10KG - MOSTRO 57 Capacity: 10Kg, Arm Speed: 35 RPM, Motor: 1 HP, Using Materials: Iron & Catine Gear Box, SS Drum & SS Arm. 58 Transporting and Unloading Charges to the Kitchen Equipmenst etc., complete.
