Construction Of Fixed Vision Center ( Fvc ) At Chc Odagaon For 2020-21 Under Sunetra Yojana
Tender Value
10.11 Lakhs
Estimated cost
Bid Submission
15 Oct 2020
0 days left
EMD
10200
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Odagaon → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Fixed Vision Center ( Fvc ) At Chc Odagaon For 2020-21 Under Sunetra Yojana
BOQ
| Name of Work: \"Construction of Fixed Vision Center (FVC) at CHC Odagaon for 2020-21 under SUNETRA Yojana \". | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation of foundation in hard soil or gravelly soil including dressing and leveling the bed and disposal of the excavated materials within initial leads and lifts as per direction of E.I.C. | 37.73 | cum | |
| 2 | 2 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. | 31.42 | cum | |
| 3 | 3 | Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. | 7.51 | cum | |
| 4 | 4 | Laterite stone masonery 1:6 in foundation & plinth including cost of all materials, labour, T&P, etc. complete. (As per A.R. 75/3) | 17.06 | cum | |
| 5 | 5 | R.C.C. M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete. | |||
| 6 | 5.1 | Column Base | 4.8 | cum | |
| 7 | 5.2 | Column Shaft | 2.73 | cum | |
| 8 | 5.3 | Plinth Beam | 2.82 | cum | |
| 9 | 5.4 | Lintel | 1.41 | cum | |
| 10 | 5.6 | Chajja | 4.41 | sqm | |
| 11 | 5.7 | Roof Beam | 2.15 | cum | |
| 12 | 5.8 | Roof Slab | 5.37 | cum | |
| 13 | 6 | Providing M.S. reinforcement for R.C.C. work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge and cost and carriage of steel. etc. complete. | 23.29 | qntl. | |
| 14 | 7 | Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. | 24.2 | cum | |
| 15 | 8 | 20mm thick cement plaster (1:6)in all Floors finished smooth including cost of all materials, labour, T&P, etc. complete. (As per A.R. 103/8) | 16.15 | sqm | |
| 16 | 9 | 12mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. | 96.69 | sqm | |
| 17 | 10 | 16mm thick C.P. in C.M.(1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. | 100.14 | sqm | |
| 18 | 11 | 6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. | 44.83 | sqm | |
| 19 | 12 | Supplying, fitting and fixing vitrified tile (Plain) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the worl all complete as per direction of E.I.C. (For New work only) | 44.36 | sqm | |
| 20 | 13 | Fixing tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. | 15.99 | sqm | |
| 21 | 14 | Supplying of M.S. Door, Window with grills, Grills, collapsible gates made out of M.S. Angle frame, M.S. Flat, Sheet etc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour T&P, carriage of materials to site etc. complete. | 241.06 | kg | |
| 22 | 15 | Providing and fixing factory made uPVC white colour sliding glazed windows upto 1.50mtr in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.20mm thick galvanized mild steel section made from roll forming processing of required length (shape and size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlock,EPDM gasket,wool pile,zinc alloy (white powder coated) toch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg) G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and shas shall be mitred cut and fusion welded at all comers,including drilling of holes for fixing hardwares and drainage of water etc. | 6.58 | sqm | |
| 23 | 16 | Dressed seasoned sal wood (50mm. to 150mm. & upto 2.75m. long.) work framed and fixed (wrought and put up) in trusses, purlins, frames of doors, windows, ventilators and beams | 0.1 | cum | |
| 24 | 17 | Providing and fixing factory made uPVC white colour sliding glazed windows upto 1.50mtr in height dimension comprising of uPVC multichambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60+0.20mm thick galvanized mild steel section made from roll forming processing of required length (shape and size according to uPVC profile) appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlock,EPDM gasket,wool pile,zinc alloy (white powder coated) toch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg) G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and shas shall be mitred cut and fusion welded at all comers,including drilling of holes for fixing hardwares and drainage of water etc. | 0.72 | sqm | |
| 25 | 18 | 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. But excluding the cost of iron fittings | 4.27 | sqm | |
| 26 | 19 | Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances, taxes of all materials and cost of all labour with T&P etc, complete as per specification & direction of Engineer-in-charge. | 14.43 | sqm | |
| 27 | 20 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. | 140.56 | sqm | |
| 28 | 21 | Distempering two coats to walls over a coat of primer with distemper of approved shade on New work to give an even shade excluding cost of distemper. | 140.56 | sqm | |
| 29 | 22 | Finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats over a coat of wall primer to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . | 112.84 | sqm | |
| 30 | 23 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. | 53.74 | sqm | |
| 31 | 24 | Recessed wiring to Group -B light /Fan/ Exhaust fan/Call bell point with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia medium class PVC conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-L&T/ Anchor/ Havells/ V-Guard/ RR KABEL) ) | 15 | Point | |
| 32 | 25 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp switch and socket of Modular type including all connection. (Make- Legrand / Roma/ Havells) | 4 | Each | |
| 33 | 26 | Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection. (Make- Legrand / Roma/ Havells) | 2 | Each | |
| 34 | 27 | Supply and fixing of Electronics step type Modular fan regulator. (Make- Legrand / Roma/ Havells) | 4 | Each | |
| 35 | 28 | Supply and fixing of 6Amp plug with 6Amp switch on existing board. (Modular type)(Make:-Legrand / Roma/ Havells) | 2 | Each | |
| 36 | 29 | Recessed wiring to submain in 2 x 2.5 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard) | 50 | Mtr | |
| 37 | 30 | Recessed wiring to submain in 2 x 4 sq.mm FRLS PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia medium class PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FRLS PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard) | 25 | Mtr | |
| 38 | 31 | Supply and fixing of 6 way double door single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (Make-HPL/ Havells/ Legrand / L&T/ C&S) | 1 | Each | |
| 39 | 32 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series, single poles MCB of Legrand/Snheider/Siemens make or any other equivallent A catagories reputed make ISI marked as approved in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. | 6 | Each | |
| 40 | 33 | Supply and fixing CALL bell (Ding dong type) /Buzzer on the existing switch box/cover of Anchor make .as required as per direction of Engg.-in-Charge | 1 | Each | |
| 41 | 34 | Supplying, installation, testing and commssioning of 1400 mm sweep white/milky colour ceiling fan of Havells velocity/ CROMPTRON JURA/Halonix/Bajaj Make or any other equivalent reputed make star rated as approved including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required.(With fan Regulator) as required as per direction of Engg.-in-Charge | 5 | Each | |
| 42 | 35 | Supplying and fixing of Energy efficient surface/Concealed mounted LED luminaire made up of CRCA powder coated housing, bottom frame and reflector of 595 X 595 mm size with of 40-42W and system lumens output not less than 4000 lumens/watt, Option of Satin finish High Efficiency Translucence (HET) diffuser/clear acrylic diffuser sealed with bottom frame using non-hygroscopic VHB gasket to ensure dust proofin,with High luminous flux LEDs for better light output,CRI not less than 80, CCT of5700-6500 degree K, THD less than 10%, complete with electronic driver and all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make:WIPRO model no: LC20-551-XXX-57-XX or similar of /PHILIPS/ Trilux /Osram/Halonix/Bajaj make )Each OT/ICU AREA LIGHT | 4 | Each | |
| 43 | 36 | SITC of energy efficient LED tube light fittings with decorative batten and LED tube light having power rating not more than 20 watt and lumen output not less than 1800 lumen complete with electronic driver and all other accessories with diffuser i/c connection etc as required. (Similar to WIPRO Model No:LL20-221-XXX-65NE1 or similar make of /PHILIPS/Bajaj/Halonix) | 2 | Each | |
| 44 | 37 | Supply and fixing 10 watt LED bulb. (Make- Havells/ Phillips/ Bajaj/ Crompton ) | 4 | Each | |
| 45 | 38 | Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993) of following capacity on existing surface / wall mounting and completer with HRC fuse links, interconnections, earthing , etc as required as per direction of Engineer-in-charge. (Make- HPL/ Anchor/ RK/ Hercules/ Benlo)\n63Amp ICTPN Main switch on MS angle frame | 1 | Each | |
| 46 | 39 | Supply and fixing of 32Amp Modular DP switch | 1 | Each | |
| 47 | 40 | Supplying all materials , labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 ) and pipe fittings of the following nominal bore with clamps including making good the wall,ceiling and floor ,testing all complete as per P.H. specification and direction of Engineer-in-charge | |||
| 48 | 42 | 20mm dia ASTM ( Sch-80 ) PVC Pipe | 10 | mtr | |
| 49 | 43 | 25mm dia ASTM ( Sch-80 ) PVC Pipe | 10 | mtr | |
| 50 | 44 | 32mm dia ASTM ( Sch-80 ) PVC Pipe | 20 | mtr | |
| 51 | 45 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. | |||
| 52 | 48 | In Ground floor | 3 | Each | |
| 53 | 49 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. | |||
| 54 | 50 | In Ground floor | 20 | Mtr | |
| 55 | 51 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge | |||
| 56 | 52 | 250mm to 375mm thick wall | 3 | Each | |
| 57 | 53 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge(make of brass/GM/CP fittings are to be pre-approved by the EIC) | |||
| 58 | 54 | 15mm dia C.P. long body bib cock(Plaza/Amber) | 2 | Each | |
| 59 | 55 | 15mm dia CP angle stop cock(Plaza/Amber)) | 5 | Each | |
| 60 | 56 | 15mm dia CP flange | 7 | Each | |
| 61 | 57 | 15mm dia CP extension piece | 7 | Each | |
| 62 | 58 | 125mm dia CP grating | 3 | Each | |
| 63 | 59 | 32 mm dia Brass FW Ball valve | 1 | Each | |
| 64 | 60 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge | |||
| 65 | 61 | 10 litres PVC L.L.cistern with 32mm dia C.P. long flush bend Whiite with cistern(Parryware/ Hindware/Neycer) | 2 | Each | |
| 66 | 62 | Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class Fly ash brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge (Sintex/Rotax make) | |||
| 67 | 64 | 1000 litre capacity water storage tanks. | 1 | Each | |
| 68 | 65 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge | |||
| 69 | 66 | 110mm dia U-PVC SWR pipe(Supereem/Ashirvad) | 14 | Mtr | |
| 70 | 67 | 110mm U-PVC door Tee | 2 | Each | |
| 71 | 68 | 110mm U-PVC door bend | 3 | Each | |
| 72 | 69 | 110mm U-PVC offset | 2 | Each | |
| 73 | 70 | 110mm U-PVC cowl | 2 | Each | |
| 74 | 71 | 110mm dia. U-PVC \"P\" trap | 3 | each | |
| 75 | 72 | 110mm dia. U-PVC plain shoe bend | 2 | each | |
| 76 | 73 | 110mm U-PVC plain bend | 3 | Each | |
| 77 | 74 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge | |||
| 78 | 75 | 580mm O.W.C.(Parryware/Hindware/Neycer/Cera) | 1 | Each | |
| 79 | 76 | E.W.C. P or S trap(Parryware/Hindware/Neycer/Cera) | 1 | Each | |
| 80 | 77 | Supplying all materials, labour, T&P and fitting and fixing of 30mm solid PVC door including supply of all door fixtures,convency charges etc all complete as per specification and direction of the Engineer in charge. | |||
| 81 | 78 | 2x0.75x2.00= | 3 | sqm | |
| 82 | 79 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste etc all complete as per specification and direction of the Engineer in charge | |||
| 83 | 80 | Fixing 550mmx400mm size wash hand basin with pedestal(Parryware/Hindware/Neycer/Cera) | 3 | Each | |
| 84 | 81 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted min 5mm thick on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge | |||
| 85 | 82 | 600mm x 450mm B.E mirror min 5mm thick. | 3 | Each | |
| 86 | 83 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(make of CP fittings are to be pre-approved by the EIC) | |||
| 87 | 84 | 600x125mm plate glass shelf with CP guard rails | 3 | Each | |
| 88 | 85 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge(make of CP fittings are to be pre-approved by the EIC) | |||
| 89 | 86 | 25mmx600mm long CP towel rail | 3 | Each | |
| 90 | 87 | Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer in charge. | |||
| 91 | 88 | 2x1.80x1.35x0.30= | 1.46 | cum | |
| 92 | 89 | Supplying all materials, labour, T&P and providing cement concrete ( 1:3:6 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge | |||
| 93 | 90 | 2x1.80x1.35x0.10= | 0.49 | cum | |
| 94 | 91 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge | |||
| 95 | 92 | 2x1.80x1.35x0.05= | 0.25 | cum | |
| 96 | 93 | Supplying all materials, labour, T&P and providing and fixing ceramic tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge (ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 30cmx30cm special printed series to be pre-approved by the Engineer-in-charge) | |||
| 97 | 94 | 2x1.80x1.35= | 4.86 | sqm | |
| 98 | 95 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. | |||
| 99 | 96 | In G.F.-2x2(1.80+1.35)x2.10= | 30.24 | sqm | |
| 100 | 97 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 20cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge ) | |||
| 101 | 98 | In G.F.-30.24-3.00= | 27.24 | sqm | |
| 102 | 99 | Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge | |||
| 103 | 101 | In side size 250mmx250mm | 3 | Each | |
| 104 | 102 | Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
| 105 | 103 | Inside size 760mmx760mmx460mm | 2 | Each | |
| 106 | 104 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. | |||
| 107 | 105 | 110mm dia u-pvc pipe alround concrete | 6 | Mtr | |
| 108 | 106 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge | |||
| 109 | 107 | RCC rings soakway pit 1.20m dia x 2.10m deep | 1 | Each |
AI Tender Summary
Tender Timeline
Oct 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender