Name of Work:SIC of submersible pump set with all allied E&M equipments for Ballimaran area under AE-II
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1.01
S/o submersible pump set fitted with dynamically balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller.. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on three phase,415 volts ,50Hz., AC 5 HP, Head-48-88 Mtrs., Discharge-230-110 LPM MAKE:BS/KSB/SU/DJB APPROVED
item1
5
Nos.
2
1.02
Fabrication and supply of electrical LT panel made out MS sheet of 16 SWG in angle iron of 40x40x5 mm thick , tentative size of panel 900x900mm.It made out of suitable size angle iron &MS sheet with door and interlocking arrangement duly painted and suitable space for energy meter having following items. Internal wiring with suitable size copper conductor wires as per IER 1 No. Make :- Havells/Finolex\nSwitch fuse unit of 63 Amp,415V capacity\nHavells/Standard 1 No.\nFully automatic star/delta oil immersed type starter upto\n7.5 HP induction motor Bentex/Havells 1 No.\nAmp.Meter0-30 Amp.96x96mm AE/EE 1 No.\nVolt meter 0-500 volts 96x96mm AE/EE 1 No.\nIndicating lamp set RYB set of 03 Nos. 1 No. Make L&T\nShunt Capacitor of 5 KVAR-GE/Epcos 1 No.\nSelector switch for volt meter 1 No. Make L&T & vaisno.\nMotor protection assembly having dry run protection, Earth leakage single phase protection, high low voltage, Phase sequence corrector, overload time delay protection power on programmable time switch i.e RYB phase facility to change from auto to manual &vice versa upto 7.5 HP.MakeGain Guard/Pious 1 No. 3-pole ELCB 63 Amp 1 No.\nMake-Havells/Standard\n
item2
5
Nos
3
1.03
PVC insulated flat submersible cable with copper conductor having three core Size 2.5 sq mm 1100 volts (100mtr per roll) Make- Finolex/National/Havells
item3
6
Roll
4
1.04
S/o G.I Pipe 40mm dia medium class both end socketed 6mtr long. Make- Jindal/TATA.
item4
90
Nos
5
1.05
S/o GI Socket 40 mm dia MAKE: UNIK / ISI
item5
50
Nos
6
1.06
S/o G.I Tail piece 40mm dia medium class 1mtr long Make- Tata/Jindal
item6
10
Nos
7
1.07
MS clamp for holding 40 mm dia pipe
item7
5
Nos
8
1.08
Supply of MS bore cover 8 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center
item8
5
Nos
9
1.09
Installation of above equipments at site work includes transportation manpower safety measures etc. as required at site & testing/commissioning complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
