Construction Of Cold Room ( Capacity 30Mt ) At Rampur Pacs In Pratappur Block Dist . Chatra
Tender Value
31.97 Lakhs
Estimated cost
Bid Submission
14 Oct 2020
0 days left
EMD
64000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
CHATRA → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Cold Room ( Capacity 30Mt ) At Rampur Pacs In Pratappur Block Dist . Chatra
BOQ
| Name of Work:Construction of Cold Room (Capacity 30MT) At Rampur Pacs in Pratappur Block Dist. Chatra | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying Installation and commissioning of pre fabricated cold chamber Collogix or Equivalent make CXSC-10 Model Air cooled scroll Condensing unit with complete line components, operating, monitoring, protection control system and CHA-10 Industrial evaporator 2 set, and Supplying and Installation of 80 mm PUF Insulation panel 1 set, C&L flashing Fastnets sealants, 50 mm floor insulation slabs and PUF door as detail Below.\n Storage External Dimension L-22’ x W-20’ x H-10’, Product to be Stored:- Raw Vegetable, Required Storage Temperature:- 5 to 8 degC, Product Entry Temperature:- 26 degC, Maximum Loading Capacity:- 30 Tons Depending on the item and packing, Temperature Pull Down Duration:- 12 to 24 hours, Refrigerant :- R134A, Evaporator :- Fin and Tube (Cu-Alu), Number of Evaporators :- 2, Type of CUD :- Air cooled Scroll (9.5kw) x 2 Nos, Compressor :- Emersion Copeland/Denfoss, Floor Insulation:- 50 mm (PUF) Slabs, Wall and Ceiling insulation :- 80 mm (PUF) Panel with PCGI with middle insul-beam, PUF Door Dimension :- 900 mm (W) x 1800 (H) x 80 mm thick, Hinged Door, Number of Door:- 1, Operating Panel:- Digital temperature controller with required indicators, Required Electricity:- 380 to 420V – 3.5 KW each x 2 at peak, \nAir cooled refrigerant condensing unit are supplies with respective type and capacity to compressors to application and required following refrigerant flow, pressure, temperature, and equipment, protection control devices. Industrial coolers are supplied with finned tube (Alu-Copper) air heat Exchangers with required axial flow fans with external rotor motor, refrigerant supply distribution and refrigerant metering device. Field Piping and Accessories :- The standard field refrigerant piping[cu] of 5mts with suitable Nitrile rubber insulation, water drain piping, clamping & fastening supports, power cables for connecting evaporator and condensing units. Initial consumables like refrigeration oil, brazing rod, flux, N2, O2, LPG gases, tapes and adhesives. First charge of refrigerant gas including, with Transportation and loading unloading, with All material and labor with supplying installation commissioning and testing all complete as per engineer in charge. | BI01010001010000000000000515BI0100001127 | 1 | set |
| 2 | 2 | Wellglass LED Lighting ( 26W): Supply erection and commissioning of environmental friendly, energy saving long life corrosion resistant, vertical/horizontal surface mounting pressure die-cast aluminium well glass luminaires with high power led as light source with IP:65. Make Havells-NEOTSS26W LED-757SPCSO/ Bajaj/ Wipro/Philips) | BI01010001010000000000000515BI0100001128 | 2 | Each |
| 3 | 3 | Silent DG Set 15kVA: Supply, installation, testing & commissioning of 15kVA, DG Set, 415V, 3 phase, of Genset-CJ15D5P with engine-X1.3TAAG1 complete with Standered manual panel including one EOD breaker of suitable rating, radiator dry battery and fuel tank , canopy enviroment friendly, sound less Kirloskar/jonson/escort make | BI01010001010000000000000515BI0100001129 | 1 | SET |
| 4 | 4 | Main Panel - Supplying, designing, manufacturing, installation, testing, fitting, fixing and commissioning in correct alignment position, effecting proper connection of all incomers and outgoing of PDB panel of 14 SWG CRCA Sheet (2mm) steil IP-54 floor mounting cubical type LT Panel suitable for operation on 415V, 50Hz, 3Ph, AC supply and fault level 35kA. Apporexmate size (Shall be given at the time of work order ) with front operated construction including seperate fabrication arrangement for fixing of switchgears and meters. The sheet steel under go minimum seven tanks treatement followed by finishing poder coating of minimum 60 microns thickness duly compart mentalized with locking arrangement duly fixed on base channel size 100mm X 75mm X 6mm having accessories mounted inside cubicale panel, earthing with 2 Nos. of earth studs. All opening shall be covered by soft rubber gaskit,enclosure shall be galvanished. Panel shall have suitable cable entry from top and bottom and suitable arrangement for multiruns aluminium cables for MCCB. Incomer 1 no-MCCB, 63A , 415V, 4P, 36kA - for main JSEB supply, with thermo-magnetic based released type with O/L, S/C protection with adjustable current with spreader links and extended rotary handle. Make-C&S/ ABB/Legrand/ L&T/ Schnider 1 no-Rotary handle 1 no-Spreader Link 1 no- MCCB ,40A , 415V, 4P, 36kA- for DG supply, with thermo-magnetic based released type with O/L, S/C protection with adjustable current with spreader links and extended rotary handle. Make-C&S/ ABB/Legrand/ L&T/ Schnider 1- no 40A, 3 phase changeover switch Outgoings-40 nos-MCCB, 4P,36 kA for refregerated plant panel, Digital Am-meter, three phase, Digital Volt-meter, three phase, 10 kW, 3 phase meter, 32A DP MCB 'C-Series'. , 2 nos-Power Contactor NO NC of three phase of suitable rating. Make:- L&T / Siemens/Legrand , CT 100/5VA -5 class one Epoxy resin cast CT (3 Nos.)=1 Set. Make:-Kappa / Matrix , 3 nos-Phase indicating light shall be protected by 2 Amps SP MCB's for incomer.Make-L& T./ AE/ Schneider., 2x2.5 Sqmm + 1x2.5 sqmm earth wire, Bus Bar 100A , 415V, 3Ph, 50 Hz, TPN High Conductivity electrolytic Aluminium bus bar of suitable length, insulated by heat shrinkable sleeves. The current density of bus bar shall be minimum 1.0 Sq mm / Amp. 16 gauge iron sheet to be fabricated for panel mountred switch disconnector, including bus bar chamber, insulation painting etc as required( but without bus bar copper strip) | BI01010001010000000000000515BI0100001130 | 1 | SET |
| 5 | 5 | Supplying Vegetable crate Basket Diameter (mm) : 450, Cane Diameter (mm) : 12, Basket Depth (mm) 350, Conformity to Indian Standard IS 3053 (Latest) All Complete with Transportation and material as per Building Specification and Direction of Engineer in Charge. | BI01010001010000000000000515BI0100001131 | 300 | Each |
| 6 | 6 | 12 % GST | BI01010001010000000000000515BI0100001132 | 12 | GST |
| 7 | 7 | 1% Labour Cess | BI01010001010000000000000515BI0100001133 | 1 | Cess |
AI Tender Summary
Tender Timeline
Oct 08, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 15, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender