Construction Of 8 Nos . Tubewell In Village Loharli-Iii , Kuthera Jaswala-I And Ii , Badehra Rajputan , Guglehar-I And Ii , Jadla-I And Mawa Sindhian Tehsil Ghanari Distt . Una ( Hp ) Construction Of Civil Works Such As Pump House , Boundary Wall
Tender Value
9.67 Lakhs
Estimated cost
Bid Submission
20 Oct 2020
0 days left
EMD
19346
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gagret → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 8 Nos . Tubewell In Village Loharli-Iii , Kuthera Jaswala-I And Ii , Badehra Rajputan , Guglehar-I And Ii , Jadla-I And Mawa Sindhian Tehsil Ghanari Distt . Una ( Hp ) Construction Of Civil Works Such As Pump House , Boundary Wall And Internal Wiring Etc . For Tubewell Mawa Sindian And Kuhera Jaswalan-I
BOQ
| Name of Work: Construction of 8 Nos T/Well in village Loharli -III, Kuthera Jaswala -I & II, Badehra Rajputan, Guglehar- I & II, Jadla- I and Mawa Sindhian tehsil Ghanari Distt. Una (HP) (SH:- C/O Civil works such as Pump House, Boundary Wall and Internal Wiring etc. for T/Well Mawa Sindian and Kuthera Jaswalan-1) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in foundation, trenches in earth work in all kinds of soil,such as pick work,jumper work.blasting work in hard rock and soft rock and in saturated soil etc. i/c all leads and lifts , stacking the excavated soil not more than 3 mtrs. clear form the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinth, sides of foundation etc. consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth as per the direction of the Engineer-in-Charge. | 51.14 | Cum | |
| 2 | 2 | Providing and laying cement concrete 1: 6: 12 ( 1 cement 3 sand : 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts and as per the direction of the .Engineer-in-Chaarge. | 17.78 | Cum | |
| 3 | 3 | Squarred rubble stone masonry/polygonal rubble masonry uncoursed /brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level complete in all respect including all leads and lifts as per the direction of the Engineer-in-Charge. | 17.1 | Cum | |
| 4 | 4 | 1st class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement :6 sand) in all lead and lifts as per the direction of the Engineer-in-Charge. | 7.1 | Cum | |
| 5 | 5 | 1st class brick work using common burnt clay building bricks in superstructure in cement mortor 1:6 (1 cement :6 sand) in all lead and lifts as per the direction of the Engineer-in-Charge. | 21.8 | Cum | |
| 6 | 6 | Half brick work using common burnt clay building bricks in super structure above 1st. floor level in cement mortar 1 : 4 ( 1 cement :4 sand) of 1st. Class bricks complete in all lead and lifts as per the direction of the Engineer-in-Charge. | 101.56 | Sqm | |
| 7 | 7 | Providing Wood Work in frames of doors, windows and other frames wrought framed and fixed in position with second class deodar wood in all leads and lifts. | 0.384 | Cum | |
| 8 | 8 | Providing and fixing pannelled glazed and panalled and glazed shuttrs for doors ,windows and clerestory windows including bright finshied /black enemelled iron butt hinges with necessary screws fIst class deodar wood 40 mm thick. 2 nd class deodar wood complete in all respect and as per the direction of the Engineer - in- Charge. | 11.62 | Sqm | |
| 9 | 9 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, struting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for in situ-reinforced concrete and plain Concrete work in :- | |||
| 10 | 10 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness. | 46.84 | Sqm | |
| 11 | 11 | Sides and sofitts of beam, beam haunching, cantiliver and bressumers and lintlels not exceeding 1 Mtrs. In depthts from floor complete in all leads and lifts and as per the direction of the Engineer-in-Charge. | 13.18 | Sqm | |
| 12 | 12 | Edge of slab and breaking floors and walls under 20 CM wide | 68.66 | Rmt | |
| 13 | 13 | Providing and laying cement concret 1:1.5:3(1cement :1.5sand : 3 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work & reinforcement for reinforced concrete work in : | |||
| 14 | 14 | Suspended floors, roofs, landing and the like Floors etc. upto 200 mm thickness in all leads and lifts and as per the direction of the Engineer-in-Charge. | 8.14 | Cum | |
| 15 | 15 | Providing mild/tor steel reinforcement of RCC work i/c bending ,binding and placing in position in complete up to floor two level in all leads and lifts and as per the direction of the Engineer-in-Charge. | 955.34 | Kg | |
| 16 | 16 | 20 mm thick cement plaster in single coat on rough side of brick/stone/concrete walls for interior plastering up to floor -2 level including arrisses,internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with in all leads and lifts and to the entire satisfaction of the Engineer-in-Charge in C.M 1:6 ( 1 cement,6 sand ) | 528.86 | Sqm | |
| 17 | 17 | 6 mm thick cement plaster to ceiling in C.M.1:3 (1Cement,3 sand) with in all leads and lifts complete in all respect and to the entire satisfaction of the Engineer-in-Charge. | 47.66 | Sqm | |
| 18 | 18 | flush Pointing on Brixk/stone masonary in cm 1:4 (1Cement:4 Sand) | 103.26 | Sqm | |
| 19 | 19 | Providing plinth protection 50 mm thick in cement concrete 1:3:6 (1 Cement :3 Sand: 6 graded stone aggregate 20 mm nominal size ) in all lead and lifts as per the direction of the Engineer - in- Charge. | 31.26 | Sqm | |
| 20 | 20 | Cement concrete flooring 1:2:4 (1cement;2sand: 4 graded stone aggregate 20mm nominal size ) 40mm thick. | 30 | Sqm | |
| 21 | 21 | Providing and fixing MS grills of required pattern in wooden frame / pressed steel frame with MS flates square / rounds bars 12 mm dia with round headed bolts and nuts of by screws in all leads and lifts and as per the direction of the Engineer - in- Charge Plain grills. | 100.62 | Kg | |
| 22 | 22 | Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts. | 18.2 | Sqm | |
| 23 | 23 | Painting two coats(excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts. | 18.2 | Sqm | |
| 24 | 24 | Providing 40x3mm flat iron hold fast 40 cms long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cms 1:3:6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) complete in all respect as per the direction of the Engineer -in- Charge. | 36 | Nos | |
| 25 | 25 | Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc.complete | |||
| 26 | 26 | (a) Sliding door bolts 250x16mm. | 2 | Each | |
| 27 | 27 | (b-i) M.S. tower bolts (Barrel type) leads and lifts. 200x10mm. | 4 | Each | |
| 28 | 28 | (b-iii) M.S. tower bolts (Barrel type) leads and lifts. 100x10mm. | 12 | Each | |
| 29 | 29 | (c-i) M.S. handles 125mm dia | 4 | Each | |
| 30 | 30 | (c-ii) M.S. handles 100mm dia | 12 | Each | |
| 31 | 31 | White washing with lime on undecorated walls surface (two coats) to give an even shade including thoroughly brooming the surface dirt dust mortar dirt and other foreign matter in all leads and lifts. | 47.66 | Sqm | |
| 32 | 32 | Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming caot with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth primer coat with distemper primer. | 116.3 | Sqm | |
| 33 | 33 | Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade after thotoughly brushing the surface to remove all dirt & remains of loose powdered materials. | 515.82 | Sqm | |
| 34 | 34 | Stone/Boulder filling under floors/behind retaining walls. | 4.38 | Cum | |
| 35 | 35 | Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregate 40mm nominal size will rammed and consolidated /and grouted with fine sand including prperation of ground. | 31.26 | Sqm | |
| 36 | 36 | Providing and fixing M.S.fan clamp(Type-I of 16mm dial M.S. Bar bent to shape with hooked ends in RCC. Slab during laying including painting the exposed portion of loop all as per standard design complete. | 2 | Nos | |
| 37 | 37 | Providing and laying cement concrete work 1:2:4(1cement:2 sand: 4 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement concrete work in suspended floors,roof,landing,shelves and their supports balconies beams,griders bressumers and centileversor reinforced concrete | 3.72 | Cum | |
| 38 | 38 | Steel work welded in built up section , trusses and framed work i/c cutting hoisting fixing in position and applying a priming coat of red lead paint in gretings, framed guards, bors ladders railing brackets and similar works. | 2.26 | Qtl | |
| 39 | 39 | Wiring for light/Fan point/Exhaust fan point/call bell point with 1.5 Sq.mm PVC insulated copper conductor cable in surface/recessed PVC conduct at required including carriage of all material within all leads and lifts.Group \"C\" | 20 | Each | |
| 40 | 40 | Wiring for light/power plug with 2 x 4 Sq.mm PVC insulated copper conductor or single core cable in surface/recessed steel conduit alongwith 1 No. 2.24 mm dia bare copper wire for loop earthing as required including carriage of materials within all leads and lifts. | 70 | Mtrs | |
| 41 | 41 | Wiring for circuit wiring with 2 x 1.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed steel conduit as required including carriage of material within all leads and lifts. | 65 | Mtrs | |
| 42 | 42 | Wiring for sub-main wiring with the following size of copper conductor single core cable in surface/recessed steel conduit as required including carriage of materials upto all leads and lifts. 2x6 Sq.mm | 2 | Mtrs | |
| 43 | 43 | Supplying and fixing metal box of 180 x 100 x 60mm deep (Nominal size) on surface/recess with suitable size phonolic leminated sheet cover fixing 3 pim 15/16 amps socket tumber/piano type switch connections painting etc. including carriage of materials within all leads and lifts. | 2 | Each | |
| 44 | 44 | Supplying and fixing 32 Amps rating 240 volts, L series MCB of following poler in the with connections testing and connections etc. as required i/c carriage of materials existing MCB DB complete within all lead and lifts Category - A single point | 2 | Each | |
| 45 | 45 | Supplying and fixing 40Amps to 63 Amps rating 240 Volts \"L\" series miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of material within all leads and lifts. | 1 | Each | |
| 46 | 46 | Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts on surface/recessed completed with tinned, copper busher neutral link, earth bar, detachable gland plate inter -connections, including painting, earthing etc. as required bar i/c carriage of material within all lead and lifts . | 1 | Each | |
| 47 | 47 | Wiring of three pin 5/6amp. Plug point with 1.5mm sq PVC i/c copper conductor cable i/c pdg and fixing three pin 5/6 amp socket outlet on switch board(in surface) recessed steel conduit wiring system and 5/6 amps. Tumble/iano type switch earthing the 3rd pin painting etc. as required(to be used only in no residential bldg balance forward) | 2 | Each | |
| 48 | 48 | P/installing testing and commissioing of premaid(loriscent tube fitting complete with ballast starter and capacitor bulb i/c florescent tube rod suitable to operate on 230 voltage single phase AC suply directly on surface with copper wiring as required i/c carriage of material within all lead and lifts . a) Tube fixing 1x40 watt box category-A | 2 | Each | |
| 49 | 49 | P/installing testing tube rod 40 watt 4\" long | 2 | Each | |
| 50 | 50 | P/installing testing and commissioing of ceiling fan and regulating i/c wiring the down rod of standred/length(upto 30cm) with 1.5 mm sq PVC insulated copper conductor single core cable etc. as required i/c carriage of material within all lead and lifts . Ceiling Fan 1200 serrp Category-A | 1 | Each | |
| 51 | 51 | Earthing with G.I. pipe earth, pipe 4.5 mtrs length, 40mm dia including accessories and providing masonry enclousres with cover plate having locking arrangement and watering pipe etc.( but without charcal coke and salt) complete as required including carriage of material within all lead and lifts . | 1 | Each | |
| 52 | 52 | Extra using salt and charcoal for pipe earth electrode as required, including carriage of materials within all leads and lifts. | 1 | Each | |
| 53 | 53 | Supplying/Laying 6 SWG G.I. wire at 0.50 mtrs below GL for conductor earth electrode i/c soldering | 15 | Each | |
| 54 | 54 | S/Fixing bakalite brass button/angle holder i/c connections etc. as required i/c carriage of materials within all leads and lifts. | 1 | Each | |
| 55 | 55 | S/Fixing MVL light cast aluminium control gear houseing complete with accessories 125 watts BPMV lamp drain aluminium housing aclelic cover with toggle catches with best satisifaction of the Engineer-in-charge i/c connection with 40 mm dia G.I. pipe 1.5 mtrs bend(1.00 and 0.5 mtrs) i/c nut & screw grouted with cement in the existing MCB as required i/c carriage of materials within all leads and lifts. | 1 | Each | |
| 56 | 56 | Pdg and connection of bulk head fitting of all size and shape containing one no. GLS lamp holder steel wire guard and lock complete with all accessories excluding GLS lamp i/c connection etc. required bull head fitting Category-A | 2 | Each |
AI Tender Summary
Tender Timeline
Oct 07, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 20, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender