| 1 | 1 | Taking down carefully aluminium/copper point wiring (light/fan/socket or power) complete including fitting fixtures such as switches, socket, ceiling rose, brackets, holders, bulk head/tube light fitting etc and removing materials from site and making good disturbed surface of walls/ floors etc complete all as specified and directed | | 35 | Per Point |
|---|
| 2 | 2 | Taking down main switch/ MCB DB/bus bar of any type/capacity by disconnecting the electric supply complete all as specified & directed | | 25 | Each |
|---|
| 3 | 3 | M&L for point wiring with stranded copper conductor 2.5 Sqmm size (nominal area) PVC insulated unsheathed cable in and including PVC concealed conduit ISI Marked, not less than 20 mm dia, medium grade, concealed sunken pressed steel terminal boxes of required size, not less than 1.2 mm thickness of sheet, factory made and painted with stove enameled black paint with top cover 3 mm thick plastic laminated sheet(hylam brand) of required colour fixed with brass screws and cup washers including PVC insulated, unsheathed cable solid copper conductor of 1.5 Sqmm as earth continuity wire and connected to earth dolly and all sunken/terminal boxes and each fitting/fixture complete with all accessories for one independent light point/socket outlet point controlled by one switch, SP, one way, 15 amps all as specified and directed. | | 35 | Per Point |
|---|
| 4 | 4 | S&F switch piano, flush type 15 Amp single pole one way, 230 volts, complete all as specified. | | 20 | Each |
|---|
| 5 | 5 | S&F ceiling rose surface Bakelite 65 x 35 mm three terminals all as specified | | 10 | Each |
|---|
| 6 | 6 | M&L for providing the MCB DB of sheet metal enclosure single pole and neutral 240V, 2 way without bus bar including SPN 6-32 Amp and fixed with mild steel hold fasts fixed on pole or grouted in walls with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate),complete all as specified. | | 15 | Each |
|---|
| 7 | 7 | S&F MCB single pole 240V, 6-32 Amps complete all as specified & directed. Make Crompton greaves, Havells ,schender,. | | 10 | Each |
|---|
| 8 | 8 | M&L for Laying GI tubing 40 mm light grade with all fittings for cable protection fixing on poles & road/drainage crossing complete all as specified and directed by Engr-in Charge. | | 12 | RM |
|---|
| 9 | 9 | Disconnection and taking down any type any height tube light fitting from glow sign board, cleaning repair overhauling including replacement of worn out accessories to make it fully functional and re-fixing on existing location complete all as specified and as directed. Note : Accessories will be measured and paid separately as supply only under respective items as considered herein after. | | 2 | Each Job |
|---|
| 10 | 10 | Supply only LED Tube light 20w fitting complete all as specified and as directed. | | 4 | Each |
|---|
| 11 | 11 | M&L for fabrication of MS Grill of suitable size for protection of dome light, made out of MS angle iron 25x25x03 mm of required length&Shape of frame (2x2x2 feet)and MS wire of Size SWG-14,fixed to angle iron frame including painting with one coat of red oxide primer and two coats of super enamelled black painted including the provision of hinges and locking arrangement and including grouting with PCC as site required or fixing by welding to the pillar/GI pipe of Dome light complete all as directed. | | 2 | Each Job |
|---|
| 12 | 12 | Supply&Fixing LED Post top lantern 25W spherical diffuser of internal driver & fitting LED lamp and Non breakable poly carbonate spherical diffuser/mushroom complete all as specified and directed by Engr-in-Charge. Model : Havells LHEVBHP7UN6K025/Crompton greaves/Bajaj/syska/luker | | 12 | Each |
|---|
| 13 | 13 | M&L in replacement of LT U/G cable XLPE insulated , armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area of following sizes. \n(a) 10 Sqmm 2 core | | 50 | RM |
|---|
| 14 | 14 | (b) 16 Sq mm 4 core | | 50 | RM |
|---|
| 15 | 15 | (C) 16 Sq mm 2 core | | 250 | RM |
|---|
| 16 | 16 | (d) 25 Sq mm 3.5 core | | 100 | RM |
|---|
| 17 | 17 | (e) 35 Sq mm 3.5 core | | 50 | RM |
|---|
| 18 | 18 | M&L for Non- transparent KIOSK 200 mm x 150 mm x 100 mm made of 2 mm thick MS sheet including aluminium bus bar 100 amps, suitable for 3 phase line system incl 02 Nos Clamp with nut. bolts fixed to LT poles complete all as specified and as directed by Engr-in-Charge. Make: Hansel/HPL/Syntex | | 15 | Each |
|---|
| 19 | 19 | Supply and fixing in replacement of digital type time switch 3P module, DIN 24 hours programmable every 1 minutes with 28 memory location of current capacity 16 Amps with one change over including connecting to existing power contactor complete.\nMake : Indoasian Cat Part No. TDA43110 or equivalent in HPL/L&T/havells | | 2 | Each |
|---|
| 20 | 20 | Supply and fixing in replacement of Power contactor 40 A, 4 pole of timer panel Make : INDO ASIAN/HPL/ L&T/ Havells | | 3 | Each |
|---|
| 21 | 21 | M&L for PCC (1:3:6) type C1 using 20 mm graded stone aggregate for making coping of LT poles or stage for garden lights or grouting of panels as specified and directed by Engr-in-Charge . | | 2 | Cum |
|---|
| 22 | 22 | M&L for auguring of holes in true horizontal position under road /pavement by means of mechanical rig after doing ultrasound technique to prevent any damage to existing cables/pipe lines coming in route 1.5 Mtr deep and not exceeding 50 Mtrs long including laying HDPE pipe of 150mm dia complete. | | 1 | Each Job |
|---|
| 23 | 23 | Cutting and trimming of tree branches to clear OH lines in the area of LT OH lines feeders (including repairing and jointing of ACSR conductor if damaged during cutting of tree) and removal of the trimmed branches of trees and depositing the same in ODF FY waste bins inside the campus complete all as specified and directed by Engr-in-charge. | | 50 | Span |
|---|
| 24 | 24 | M&L for Preparing existing old surface of steel tubular poles of any type 09 Mtr long for painting one coat of aluminium paint on the surface of steel tubular/PCC pole and channels/cross arms complete all as specified and as directed by Engineer-in-Charge. | | 30 | Each |
|---|
| 25 | 25 | M & L for painting to PCC/steel poles of any type and any size including channels/cross arms with two coat of synthetic enamel paint and marking the pole No in 4” dia and substn no. yellow paint circle complete all as specified and directed by Engr-in-Charge. | | 30 | Each Job |
|---|
| 26 | 26 | Supply & Fixing LED Post top lantern 10W 3 feet inverted pyramid tripod type IP 65 LED Bollard with soft 360 degree Light distribution internal driver & fitting LED and Non breakable poly carbonate diffuser with PCC base of size 300x300x300mm as on site required on ground complete all as specified and directed by Engr-in-Charge. Model : Crompton Greaves cat no.LBLSN-10-CDL /Bajaj/syska/luker/Havells | | 20 | Each |
|---|
| 27 | 27 | Supply & Fixing street light 48 watt LED fittings IP 66 complete with driver and , suitable for mounting on 40mm or 50mm dia existing GI mast or bracket arms with pole fixing attachments complete all as specified and directed by Engr-in Charge. Make : havells/ Crompton/LUKER /Bajaj | | 30 | Each |
|---|
| 28 | 28 | Supply & Fixing street light 25 watt LED fittings IP 66 complete with driver and , suitable for mounting on 40mm or 50mm dia existing GI mast or bracket arms with pole fixing attachments complete all as specified and directed by Engr-in Charge. Make : havells cat no.ENDURAPEARLSL25WLED757SASYTOPCMP/ Crompton/luker/Bajaj. | | 27 | Each |
|---|
| 29 | 29 | Supply and fixing in replacement of LED flood lights 70Watt consist of a die cats body with heat resistant toughened glass & IP66 protection level in pressure die cast aluminium housing complete with all accessories all as specified and directed by Engr-in-Charge. Make : Make Havells cat Pt No. JETAPROFL70WLED757LTG or equivalent in /Crompton GREAVES/BAJAJ | | 8 | Each |
|---|
| 30 | 30 | M&L for repairing of pedestal panel board of any size and taking proper shut down from main, taking out rear /front broken door of the panel repair it by cutting/welding and replacing of hinges, fixing in its position and internal wiring of panel accessories like volt meter, Amp meter CTs etc with suitable size of copper wire multistranded and testing complete all as specified and directed. | | 2 | Each Job |
|---|
| 31 | 31 | M&L for painting of panel board any size scraping of old paint externally internally and making it surface for repainting painting of panel with two coats of powder coated paint internally and externally over a coat of red oxide primer all as specified and directed . | | 2 | Each Job |
|---|
| 32 | 32 | M& L for Excavation in trenches n.exc 1.5 m wide and n.exc 1.5m depth for laying of cables, and getting out in loose/soft soil complete all as specified and directed by Engr-in Charge. | | 135 | Cum |
|---|
| 33 | 33 | M&L for Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm etc complete all as specified, and directed by Engr-in Charge. | | 94.55 | Cum |
|---|
| 34 | 34 | M&L for Removing excavated material (Soil) n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified, and directed. | | 40.45 | Cum |
|---|
| 35 | 35 | M&L for spreading clean dry sand for cable protection/cushioning, in trenches complete all as specified and directed, (only punned down thickness shall be measured and paid). | | 36.45 | Cum |
|---|
| 36 | 36 | M&L for Laying un reinforced precast concrete cable covers class LV type-I flat size 250 mm X 150 mm X 40 mm, complete all as specified and directed by Engr-in Charge. | | 2667 | Each |
|---|
| 37 | 37 | M&L for replacement unserviceable GI brackets incl clamps,nut,bolts of wall mounted security light made out of GI tubing 40 mmbore light grade 1.5 m long bent to shape complete all as specified and directed. | | 15 | Each |
|---|
