Provision Iron Bars Or Grill To Ducts Windows Ventilators And Other Allied Works Special Repair Of Sewage Line And Associated Work And Certain Sanctioned Work Under Age Bri At Bamrauli
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Oct 2020
0 days left
EMD
47000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bamrauli → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Iron Bars Or Grill To Ducts Windows Ventilators And Other Allied Works Special Repair Of Sewage Line And Associated Work And Certain Sanctioned Work Under Age Bri At Bamrauli
BOQ
| Name of Work: PROVISION IRON BARS OR GRILL TO DUCTS, WINDOWS, VENTILATORS AND OTHER ALLIED WORKS, SPECIAL REPAIR OF SEWAGE LINE AND ASSOCIATED WORK AND CERTAIN SANCTIONED WORK UNDER AGE B/R-I AT BAMRAULI | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition and breaking up drain pipe 150mm (Salt glazed stone ware pipe or reinforced concrete) set in cement mortar complete all as specified and directed. | 5 | RM | |
| 2 | 2 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 8 | Cum | |
| 3 | 3 | Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. | 1 | Cum | |
| 4 | 4 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 12 | Cum | |
| 5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed. | 50 | Sqm | |
| 6 | 6 | Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. | 85 | Sqm | |
| 7 | 7 | Excavating in trenches, n. exc. 1.5m wide and n.exc.1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10Sqm on plan and n.exc.1.5m in depth and getting out in any type of soil complete all as specified and directed. | 300 | Cum | |
| 8 | 8 | All as per Sl Item No. 7 above but depth exceeding 1.5m but not exceeding 3m. | 4 | Cum | |
| 9 | 9 | Returning,filling in, including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and directed. | 150 | Cum | |
| 10 | 10 | Removal excavated surplus material exc 250m and n.exc 500m and depositing where directed at a level not exceeding 1.5 m complete all as specified and as directed. | 170 | Cum | |
| 11 | 11 | M & L for PCC 1:5:10 type E-2 (Using 40 mm graded stone aggregate) as in sub base / mass concrete complete all as specified and directed. | 6 | Cum | |
| 12 | 12 | M&L for PCC 1:3:6 type C-2 (Using 40mm graded stone aggregate) as in foundation & mass concrete, filling complete all as specified and directed. | 10 | Cum | |
| 13 | 13 | S&F salt glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches jointed in CM 1:1 and testing on completion complete all as specified and directed. | 10 | RM | |
| 14 | 14 | S&F Reinforced concrete drain pipe 200mm bore, class NP-2, laid in trenches and jointed in CM 1:1 with collars complete all as specified and directed. | 500 | RM | |
| 15 | 15 | Use and waste of form work to soffit of suspended slab not exceeding 200mm thick, horizontal, flat, for rough finished surfaces of concrete complete all as specified and directed. | 5 | Sqm | |
| 16 | 16 | M&L for PCC 1:4:8 tyep D2 (Using 40mm graed stone aggregate) as in bed of drain pipes of 150mm bore including packing under & haunching against the sides of pipes after they are laid & tested, complete all as specified and directed. | 10 | RM | |
| 17 | 17 | M&L for PCC 1:4:8 tyep D2 (Using 40mm graded stone aggregate) as in bed of drain pipes of 200 mm bore including packing under & haunching agaunst the sides of pipes after they are laid & tested, complete all as specified and directed. | 500 | RM | |
| 18 | 18 | M&L for Reinforced cement concrete 1:2:4, type B-1 (Using 20mm graded stone aggregate) in slabs, complete all as specified and directed. | 1 | Cum | |
| 19 | 19 | Use and waste of form work to edges/sides of slab exceeding 5cm & not exceeding 10 cm wide, flat, for rough finished surface of concrete complete all as specified and directed. | 50 | RM | |
| 20 | 20 | M&L for PCC 1:2:4 type B-I (Using 20mm graded stone aggreagate) as in surface channels and drains complete all as specified and directed. | 1 | Cum | |
| 21 | 21 | Extra for forming fair finished channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends,complete all as specified and directed. | 30 | RM | |
| 22 | 22 | Add or deduct for each 25 mm girth or part thereof over or under 30cm for extra for forming fair finished channel complete all as specified and directed. | 10 | RM | |
| 23 | 23 | M & L for brick masonry with sub class \"B\" bricks built in cement mortar 1:6 straight or curved on plan main radiuous exe 6 mtr etccomplete all as specified and directed. | 20 | Cum | |
| 24 | 24 | M&L for hard core of broken bricks of guage nexc 63mm, deposited spread, and levelled in layers nexc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. | 5 | Cum | |
| 25 | 25 | M & L for Pre-cast reinforced cement concrete 1:2:4, type B-1 (Using 20 mm graded stone aggeragate) as in cover slabs ( for manholes etc) chullah hoods complete all as specified and as directed. | 6 | Cum | |
| 26 | 26 | S&F reinforcement TMT steel bars of 6 to 8mm dia., cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia. or securing with clips or welded complete all as specified and directed. | 150 | Kg | |
| 27 | 27 | M&L for rendering 15 mm in one layer in CM 1:4 on fair faces of brick or concrete surfaces, finished even & smooth without using extra cement, cement mortar mixed with water proofing compound complete all as specified and directed. \nNote:- WPC will be measured & paid separately under respective item of the schedule. | 150 | Sqm | |
| 28 | 28 | Supply only water proofing compound of approved make complete all as specified and directed. | 40 | Kg | |
| 29 | 29 | M&L for PCC 1:2:4, type B1(Using 20 mm graded stone aggeragate) as in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, hold fasts, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. Note: The unit rate quoted is deemed to be inclusive of necessary formwork. | 6.39 | Cum | |
| 30 | 30 | Cutting of exising 150 mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1. smooth finished and reforming benching as required complete all as specified and directed by Engineer-in-Charge. | 20 | Each Pipe | |
| 31 | 31 | Dismantling of 75 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches including taking out of any type of joints complete all as specified and directed. | 10 | RM | |
| 32 | 32 | Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches including taking out any type of joints complete all as specified and directed. | 20 | RM | |
| 33 | 33 | Dismantling of 50 mm dia cast iron pipe (soil/waste/vent) with fittings from walls, on floors & from trenches including taking out any type of joints complete all as specified and directed. | 15 | RM | |
| 34 | 34 | M& L PVC floor trap, 75 mm size, plain with grating including jointing to waste pipe fixed in jounting in solvent cement complete all as specified and directed. | 10 | Each | |
| 35 | 35 | S & F in repairs 110 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. | 5 | RM | |
| 36 | 36 | S & F in repairs 75 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed | 5 | RM | |
| 37 | 37 | S & F in repairs 110 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. | 15 | RM | |
| 38 | 38 | S & F in repairs 75 mm PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. | 10 | RM | |
| 39 | 39 | S & F in repairs PVC(SWR) bend 75 mm dia in any radius complete all as specified and directed. | 10 | Each | |
| 40 | 40 | S & F in repairs PVC(SWR) bend 110 mm dia in any radious complete all as specified and directed. | 10 | Each | |
| 41 | 41 | S & F in repairs branch piece, 110mm dia , single( equal or unequal) ordinary or inverted ( spigot or socket type ) with parallel branches in complete all as specified and directed. | 5 | Each | |
| 42 | 42 | S & F in repair branch piece, 75 mm dia, single( equal or unequal) ordinary or inverted ( spigot or socket type ) with parallel branches in complete all as specified and directed. | 5 | Each | |
| 43 | 43 | M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed. | 150 | Sqm | |
| 44 | 44 | S & F mild steel framed work as in grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde-E-165 complete all as specified and directed. | 6745 | Kg | |
| 45 | 45 | S & F framed work as in doors or gates and angle joist, channel, angle or other sections with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering, doors to be prepare for hanging or sliding with and including either and hinges or steel hanging door fittings including steel sheet for door covering, hanging door fittings and hanging also fastening and fixing including hold fast conforming to Fe.290, Gde-E-165 complete all as specified and directed. | 422 | Kg | |
| 46 | 46 | M & L for preparation new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over coat of red oxide/zinc chrome primer complete all as specified and directed. | 112 | Sqm | |
| 47 | 47 | M & L for 40mm thick plain cement concrete, 1:2:4, type B-1 (Using 20mm graded stone aggregate), as in as in plinth protection in alternate bays including necessary formwork at sides complete all as specified and directed. | 21 | Sqm | |
| 48 | 48 | M&L for cutting holes in brick wall built in cement mortar or cement concrete exc half brick but n. exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B1 as required complete all as specified and directed. | 115 | Each | |
| 49 | 49 | M & L for brick masonry with sub class \"B\" bricks built in cement mortar 1:4 straight or curved on plan main radiuous exe 6 mtr etccomplete all as specified and directed. | 7 | Cum | |
| 50 | 50 | M&L for preparation of new plasterred surfaces of walls and applying two coats of cement base paint over and including one coat alkali resitant primer on wall surfaces complete all as specified and directed.\n | 100 | Sqm | |
| 51 | 51 | Excavating in post holes (or similar holes) each n. exc 0.5 Cum, getting out, returing filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ loose soil complete all as specified and directed. | 28 | Each | |
| 52 | 52 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed. | 185 | Sqm | |
| 53 | 53 | S&F mlid steel work in tubular trusses/tubular pipes as in post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161- 1979 grade St.-240 complete all as specified and directed. | 743 | Kg | |
| 54 | 54 | S&F mild steel work in hollow structural pipes as in rafters/purlins and trusses special shaped washer including clamps and bolts complete using ERW or induction but welded tubes conforming to IS complete all as specified and directed. | 460 | Kg | |
| 55 | 55 | M&L for PCC 1:2:4, type B-2 (Using 40mm graded stone aggregate) as foundation filling and mass concrete for post holes complete all as specified and directed. | 0.729 | Cum | |
| 56 | 56 | Surface dressing not exceeding 15 cm deep as in soft/loose soil complete all as specified and directed. | 77 | Sqm | |
| 57 | 57 | M&L for Machine pressed precast concrete interlocking coloured paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thick and grade of concrete shall be M-40 laid over and including 25mm thick sand cushioning including fillingc omplete all as specified and directed. Note : Paver blocks shall be tested in NABL approved laboratory for grade of concrete and test certificate shall be produced by the contractor before incorporation in the work. | 77 | Sqm | |
| 58 | 58 | M&L for plain cement concrete 1:4:8, type D-2 (Using 40mm graded stone aggregate) as in foundations, filling, mass concrete or in floors complete all as specified and directed. | 7.7 | Sqm | |
| 59 | 59 | M&L for 15 mm thick rendering in CM 1:6 on surfaces other than fair faces of brick wall or stone wall finishing the surface even and smooth without using extra cement complete all as specified and directed. | 70 | Sqm | |
| 60 | 60 | M&L for preparing new plastered surfaces of walls applying 2 mm thick white wall care putty, finishing the surface even and smooth and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. | 50 | Sqm | |
| 61 | 61 | S&F mild steel angle iron as in post, struts and stand for cooler and similar work including cutting tops to shape as directed drilling holes, notching for wire etc embeded on wall for straining wire or similar work complete all as specified and directed. | 50 | Kg | |
| 62 | 62 | S&F of 18 mm thick Celuka PVC sheet minimum 600 Kgbm density grade 1 quality of both side plain white colour rigid am glossy finish fixed with screwed, solvent cement/adhesive as per manufacturer instructions to make cabinet sides, top, bottom and shelves inside the cabinet including hinges, handle and locking arrangement complete as per specification and as directed by Engineer-in-Charge and as specified in PS. \nNote :- (i) Quoted rates deemed to be inclusive fixing of cup board on wall with appropriate wall plug/dash through fastener(hammer type) as specified by manufacturer instructions. (ii) Fabrication and installation of cup board to be carried out through authorized vendor of manufacturers only.\n | 27 | Sqm | |
| 63 | 63 | &F of 18 mm thick Celuka PVC sheet minimum 600 Kgbm density grade 1 quality of one side plain white colour and other side pre-laminated rigid am glossy finish fixed with screwed, solvent cement/adhesive as per manufacturer instruction to make cabinet sides, top, bottom and shelves inside the cabinet including hinges, handle and locking arrangement complete as per specification and as directed by Engineer-in-Charge and as specified in PS. \nNote :- (i) Quoted rates deemed to be inclusive fixing of cup board on wall with appropriate wall plug/dash through fastener(hammer type) as specified by manufacturer instructions. (ii) Fabrication and installation of cup board to be carried out through authorized vendor of manufacturers only.\n | 17 | Sqm | |
| 64 | 64 | S&F venation blinds vertical type or horizontal type plain/colour decorated type, level or ultima 100mm width of strip with necessary pulling threads or rolling threads aluminium channel along with all arrangement fixed to wall complete all as specified and directed.\nMake : Vista | 21.4 | Sqm | |
| 65 | 65 | S & F 1st class hard wood (Seasoned teak wood only) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. | 0.16 | Cum | |
| 66 | 66 | S&F 30 mm thick 1st class hardwood (Seasoned teak wood only) glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part I Section 8, Clause 8.24 (a) complete all as specified and directed. | 5.99 | Sqm | |
| 67 | 67 | S&F 125mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. | 24 | Each | |
| 68 | 68 | S&F of 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | 24 | Each | |
| 69 | 69 | S&F of 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. | 24 | Each | |
| 70 | 70 | M&L preparation of new surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two or more coats of french polishing upto glossy finish over a coat wood primer complete all as specified and as directed by Engineer-in-Charge. | 10.8 | Sqm | |
| 71 | 71 | M&L for preparation of new plastered surfaces walls and applying three coats of white wash complete all as specified and directed. | 20 | Sqm | |
| 72 | 72 | Dismantling of brickwork or stone/boulder masonry, built in cement mortar or cement lime lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles portions ordered to be dismantled complete all as specified and as directed by Engineer-in-Charge. | 0.25 | Cum | |
| 73 | 73 | Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payments to contractor before handing over old material. |
AI Tender Summary
Tender Timeline
Oct 05, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 26, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 27, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender