Military Engineer Services-MES has published Repair Replacement Of External Water Supply Pipe Lines Ci Di Ms Gi Of Various Sizes Cleaning Of Semi Underground Sump Rcc Overhead Tanks Of Different Capacities And Connected Works At Bhalra Mil Stn Under Ge ( I ) 873 Ews Repair Replacement Of External . Submission Date for this Tender is 14-10-2020. Pipe Laying Tenders in BHADERWAH Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Name of Work : REPAIR / REPLACEMENT OF EXTERNAL WATER SUPPLY PIPE LINES CI/ DI/ MS/GI OF VARIOUS SIZES, CLEANING OF SEMI UNDERGROUND SUMP & RCC OVERHEAD TANKS OF DIFFERENT CAPACITIES AND CONNECTED WORKS AT BHALRA MIL STN UNDER GE (I) 873 EWS. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out, complete all as specified and as directed. | 95 | Cubic Metre | |
| 2 | 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. | 85 | Cubic Metre | |
| 3 | 3 | Removing excavated soils not exceeding 50 metres and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed. | 10 | Cubic Metre | |
| 4 | 4 | Demolition of cement concrete (un-reinforced) of any descrition and in any position not otherwise specifically provided for, complete all as specified and directed. | 8 | Cubic Metre | |
| 5 | 5 | Cement concrete type D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in foundation filling, basement and mass concrete for bends, pipe support, complete all as specified and directed. | 8 | Cubic Metre | |
| 6 | 6 | Taking out Mild Steel / Cast Iron / Ductile Iron / Galvanised Iron water mains including all fittings with spigot and socket ends or flanged ends including lead / tyton joints and burning out lead joints and recovering lead, cleaning the pipe and removing to store for reuse complete all as specified and as directed :-\nNote : Excavation and earth work shall be measured and paid separately.\n | |||
| 7 | 6.01 | (a) 400 mm bore | 17 | Running Meter | |
| 8 | 6.02 | (b) 200 mm bore | 72 | Running Meter | |
| 9 | 6.03 | (c) 150 mm bore | 72 | Running Meter | |
| 10 | 6.04 | (d) 100 mm bore | 33 | Running Meter | |
| 11 | 6.05 | (e) 80 mm bore | 33 | Running Meter | |
| 12 | 7 | Taking out old unserviceable Galvanised Iron Water Pipe (including all fittings) from walls / floors / ceilings / trenches complete of following sizes :-\n | |||
| 13 | 7.01 | (a) 50 mm bore | 60 | Running Meter | |
| 14 | 7.02 | (b) 40 mm bore | 60 | Running Meter | |
| 15 | 7.03 | (c) 25 mm bore | 72 | Running Meter | |
| 16 | 7.04 | (d) 20 mm bore | 72 | Running Meter | |
| 17 | 7.05 | (e) 15 mm bore | 36 | Running Meter | |
| 18 | 8 | Laying only in trenches serviceable MS / CI / DI pipe / GI pipes after through cleaning / srubbing internally and externally, removal of blockage if any and welding for stopping leakages, if any, of the following description all as specified and as directed.\nNotes : \n1. Joints and fittings / specials will be measured and paid seperately under relevant item of Schedule. | |||
| 19 | 8.01 | (a) 400 mm bore | 11 | Running Meter | |
| 20 | 8.02 | (b) 200 mm bore | 22 | Running Meter | |
| 21 | 8.03 | (c) 150 mm bore | 22 | Running Meter | |
| 22 | 8.04 | (d) 100 mm bore | 11 | Running Meter | |
| 23 | 8.05 | (e) 80 mm bore | 11 | Running Meter | |
| 24 | 9 | Re-routing / relaying of serviceable GI pipe line obtained from Serial Item No 7.00 after through cleaning / scrubbing internally and externally of the following size, all as directed.\nNotes :\n(i) Excavation will be measured and paid seperately under relevant item of Schedule.\n(ii) Fittings such as sockets, union, Tee, bends, elbow required are demeed to be included in unit rate.\n | |||
| 25 | 9.01 | (a) 50 mm bore | 12 | Running Meter | |
| 26 | 9.02 | (b) 40 mm bore | 12 | Running Meter | |
| 27 | 9.03 | (c) 25 mm bore | 12 | Running Meter | |
| 28 | 9.04 | (d) 20 mm bore | 12 | Running Meter | |
| 29 | 9.05 | (e) 15 mm bore | 12 | Running Meter | |
| 30 | 10 | Supply, laying, jointing and testing Mild steel ERW pipes having minimum 5.4 mm wall thickness confirming to IS : 1239-2004 amended upto date in any length of following description, complete all as pecified and as directed. \nMake : TATA / Jindal / Prakash / Swastik | |||
| 31 | 10.01 | (a) 400 mm bore | 6 | Running Meter | |
| 32 | 10.02 | (b) 200 mm bore | 6 | Running Meter | |
| 33 | 10.03 | (c) 150 mm bore | 6 | Running Meter | |
| 34 | 11 | Supply, laying, jointing and testing Cast Iron Pipes with spigot and socket ends centrifugally cast, class ‘LA’, in any length, laid in trenches of the following bore :-\nNote : Run lead joints / tyton joints, CI specials and earth work shall be measured and paid separately.\nMake : Electro Steel / Lanco / Kesoram / Tata Metaliks / Electrotherm. | |||
| 35 | 11.01 | (a) 200 mm bore | 22 | Running Meter | |
| 36 | 11.02 | (b) 150 mm bore | 22 | Running Meter | |
| 37 | 11.03 | (b) 100 mm bore | 11 | Running Meter | |
| 38 | 11.04 | (b) 80 mm bore | 11 | Running Meter | |
| 39 | 12 | Supply, laying, jointing and testing Ductile iron pipe with spigot and socket ends Class K-7 suitable for tyton joint including jointing material/joints laid in trenches complete all as specified and directed of following sizes:- | |||
| 40 | 12.01 | (a) 200 mm bore | 22 | Running Meter | |
| 41 | 12.02 | (b) 150 mm bore | 22 | Running Meter | |
| 42 | 12.03 | (b) 100 mm bore | 11 | Running Meter | |
| 43 | 12.04 | (b) 80 mm bore | 11 | Running Meter | |
| 44 | 13 | Supply and fixing pipe galvanised medium grade with all fittings such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc. supplied and laid in trenches complete including all fittings of following sizes :-\nMake : Jindal / TATA / Prakash Tubes | |||
| 45 | 13.01 | (a) 50 mm bore | 48 | Running Meter | |
| 46 | 13.02 | (b) 40 mm bore | 48 | Running Meter | |
| 47 | 13.03 | (c) 25 mm bore | 60 | Running Meter | |
| 48 | 13.04 | (d) 20 mm bore | 60 | Running Meter | |
| 49 | 13.05 | (e) 15 mm bore | 24 | Running Meter | |
| 50 | 14 | Cutting the CI/ DI pipes and reducing the required length before laying for inserting of new CI specials such as Tees/ reducers/ tail pieces/ collars/ sluice valve/ air release valve etc. complete for following sizes of pipes:-\nNote:- CI specials and earth work will be measured and paid seperately. | |||
| 51 | 14.01 | (a) 200 mm bore | 6 | Each \nJob\n | |
| 52 | 14.02 | (b) 150 mm bore | 6 | Each \nJob\n | |
| 53 | 14.03 | (c) 100 mm bore | 4 | Each \nJob\n | |
| 54 | 14.04 | (d) 80 mm bore | 4 | Each \nJob\n | |
| 55 | 15 | Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe upto 150mm bore such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete all as specified and as directed. \nNote : \n1. The fittings shall be as per IS1538-1989\n2. The joints shall be measured and paid separately. | 800 | Kilogram | |
| 56 | 16 | Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe 200mm to 400mm bore such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete all as specified and as directed. \nNote : \n1. The fittings shall be as per IS1538-1989\n2. The joints shall be measured and paid separately. | 600 | Kilogram | |
| 57 | 17 | Taking out/ brning out of leakin and damaged lead joints of existing CI mainsfrom position including removing the old lead carefully without damaging to the pipe complete for the fllowing bore of pipes:\nNote: Excavation and earth work will be measured and paid seperatly. | |||
| 58 | 17.01 | (a) 200 mm bore | 12 | Each \nJob\n | |
| 59 | 17.02 | (b) 150 mm bore | 12 | Each \nJob\n | |
| 60 | 17.03 | (c) 100 mm bore | 6 | Each \nJob\n | |
| 61 | 17.04 | (d) 80 mm bore | 6 | Each \nJob\n | |
| 62 | 18 | Run lead joints for CI pipe, spigot and socket ends including jointing materials such as spun yarn etc. complete for CI pipe of following description all as specified and directed. | |||
| 63 | 18.01 | (a) 200 mm bore | 12 | Each | |
| 64 | 18.02 | (b) 150 mm bore | 12 | Each | |
| 65 | 18.03 | (c) 100 mm bore | 6 | Each | |
| 66 | 18.04 | (d) 80 mm bore | 6 | Each | |
| 67 | 19 | Welding joints for CI / DI / MS pipes including jointing material such as welding rods etc. complete for pipe of following description all as specified and directed.\nNote : The contractor shall make his own arrangement for Welding Machine and DG set required for welding work and nothing extra from the department shall be admisible on this account. | |||
| 68 | 19.01 | (a) 400 mm bore | 4 | Running Meter | |
| 69 | 19.02 | (b) 300 mm bore | 2 | Running Meter | |
| 70 | 19.03 | (c) 200 mm bore | 8 | Running Meter | |
| 71 | 19.04 | (d) 150 mm bore | 8 | Running Meter | |
| 72 | 19.05 | (e) 100 mm bore | 6 | Running Meter | |
| 73 | 19.06 | (f) 80 mm bore | 4 | Running Meter | |
| 74 | 20 | Cast Iron Sluice Valve class PN-1, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, CI operating wheel, all nuts, bolts, washers, gaskets etc. of the following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed. | |||
| 75 | 20.01 | (a) 400 mm bore | 1 | Each | |
| 76 | 20.02 | (b) 200 mm bore | 1 | Each | |
| 77 | 20.03 | (c) 150 mm bore | 1 | Each | |
| 78 | 20.04 | (d) 100 mm bore | 1 | Each | |
| 79 | 20.05 | (e) 80 mm bore | 1 | Each | |
| 80 | 21 | Stainless Steel (SS) Sluice Valve class PN-1, PD short body conforming to IS:14846-2000, heavy duty, both ends flanged with stainless steel spindle & check nut, operating wheel, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable Sluice Valve, complete all as specified & directed. | |||
| 81 | 21.01 | (a) 200 mm bore | 2 | Each | |
| 82 | 21.02 | (b) 150 mm bore | 2 | Each | |
| 83 | 22 | Cast Iron Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable NRV, complete all as specified and directed. | |||
| 84 | 22.01 | (a) 400 mm bore | 1 | Each | |
| 85 | 22.02 | (b) 200 mm bore | 1 | Each | |
| 86 | 22.03 | (c) 150 mm bore | 1 | Each | |
| 87 | 23 | Stainless Steel (SS) Non Return Valve without by-pass arrangement, swing type, confirming to IS:5312, flanged ends, all nuts, bolts, washers, gaskets etc. of following description, including dismantling of old unserviceable NRV, complete all as specified and directed. | |||
| 88 | 23.01 | (a) 300 mm bore | 1 | Each | |
| 89 | 23.02 | (b) 200 mm bore | 2 | Each | |
| 90 | 23.03 | (c) 150 mm bore | 2 | Each | |
| 91 | 24 | Air release valve with double chamber of bore conforming to IS 14845 of following description, including dismantling of old unserviceable NRV, complete all as specified and directed. | |||
| 92 | 24.01 | (a) 100 mm bore | 2 | Each | |
| 93 | 24.02 | (b) 80 mm bore | 3 | Each | |
| 94 | 24.03 | (c) 50 mm bore | 4 | Each | |
| 95 | 25 | Supply and fixing Gun metal globe / gate valve ISI Marked with and including jointing meterial and taking out old unserviceable valves complete all as specified and directed of following sizes :- \nMake : Advance / Bir / Leader / Sant | |||
| 96 | 25.01 | (a) 50 mm bore | 8 | Each | |
| 97 | 25.02 | (b) 40 mm bore | 10 | Each | |
| 98 | 25.03 | (c) 25 mm bore | 12 | Each | |
| 99 | 25.04 | (d) 20 mm bore | 12 | Each | |
| 100 | 25.05 | (e) 15 mm bore | 6 | Each | |
| 101 | 26 | Stop valves of cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete of the following description including taking out the old unserviceable stop valve complete all as specified and directed.\n | |||
| 102 | 26.01 | (a) 50 mm bore | 8 | Each | |
| 103 | 26.02 | (b) 40 mm bore | 10 | Each | |
| 104 | 26.03 | (c) 25 mm bore | 12 | Each | |
| 105 | 26.04 | (d) 20 mm bore | 12 | Each | |
| 106 | 26.05 | (e) 15 mm bore | 6 | Each | |
| 107 | 27 | Supply and fixing GI Socekt of Havey grade with and including jointing meterial and taking out old unserviceable socket complete all as specified and directed of following sizes :- \nMake : Make : Jindal / TATA / Prakash Tubes | |||
| 108 | 27.01 | (a) 50 mm bore | 10 | Each | |
| 109 | 27.02 | (b) 40 mm bore | 10 | Each | |
| 110 | 27.03 | (c) 25 mm bore | 12 | Each | |
| 111 | 27.04 | (d) 20 mm bore | 12 | Each | |
| 112 | 27.05 | (e) 15 mm bore | 10 | Each | |
| 113 | 28 | Supply and fixing GI Union of Havey grade with and including jointing meterial and taking out old unserviceable Union complete all as specified and directed of following sizes :- \nMake : Make : Jindal / TATA / Prakash Tubes | |||
| 114 | 28.01 | (a) 50 mm bore | 10 | Each | |
| 115 | 28.02 | (b) 40 mm bore | 10 | Each | |
| 116 | 28.03 | (c) 25 mm bore | 12 | Each | |
| 117 | 28.04 | (d) 20 mm bore | 12 | Each | |
| 118 | 28.05 | (e) 15 mm bore | 10 | Each | |
| 119 | 29 | Supply and fixing GI Elbow of Havey grade with and including jointing meterial and taking out old unserviceable Elbow complete all as specified and directed of following sizes :- \nMake : Make : Jindal / TATA / Prakash Tubes | |||
| 120 | 29.01 | (a) 50 mm bore | 10 | Each | |
| 121 | 29.02 | (b) 40 mm bore | 10 | Each | |
| 122 | 29.03 | (c) 25 mm bore | 12 | Each | |
| 123 | 29.04 | (d) 20 mm bore | 12 | Each | |
| 124 | 29.05 | (e) 15 mm bore | 10 | Each | |
| 125 | 30 | Supply and fixing 6" Nipple of Havey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- \nMake : Make : Jindal / TATA / Prakash Tubes | |||
| 126 | 30.01 | (a) 50 mm bore | 10 | Each | |
| 127 | 30.02 | (b) 40 mm bore | 10 | Each | |
| 128 | 30.03 | (c) 25 mm bore | 12 | Each | |
| 129 | 30.04 | (d) 20 mm bore | 12 | Each | |
| 130 | 30.05 | (e) 15 mm bore | 10 | Each | |
| 131 | 31 | Supply and fixing 12" Nipple of Havey grade with and including jointing meterial and taking out old unserviceable Nipple complete all as specified and directed of following sizes :- \nMake : Make : Jindal / TATA / Prakash Tubes | |||
| 132 | 31.01 | (a) 50 mm bore | 10 | Each | |
| 133 | 31.02 | (b) 40 mm bore | 10 | Each | |
| 134 | 31.03 | (c) 25 mm bore | 12 | Each | |
| 135 | 31.04 | (d) 20 mm bore | 12 | Each | |
| 136 | 31.05 | (e) 15 mm bore | 10 | Each | |
| 137 | 32 | Draining out water from RCC Semi Underground Sump of under mentioned capacity, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes and writing the 'Date of Cleaning' outside all as specified and directed. | |||
| 138 | 32.01 | (a) 2,00,000 Gallons | 2 | Each Job | |
| 139 | 32.02 | (b) 1,50,000 Gallons | 1 | Each Job | |
| 140 | 32.03 | (c) 1,00,000 Gallons | 1 | Each Job | |
| 141 | 32.04 | (d) 50,000 Gallons | 1 | Each Job | |
| 142 | 32.05 | (e) 40,000 Litres | 4 | Each Job | |
| 143 | 32.06 | (f) 30,000 Litres | 3 | Each Job | |
| 144 | 32.07 | (g) 20,000 Litres | 2 | Each Job | |
| 145 | 32.08 | (h) 10,000 Litres | 1 | Each Job | |
| 146 | 33 | Cleaning of RCC Open Sump of capacity 0.50 Lakh Gallons by draining out of water, taking out the sludge deposited, cleaning of Wire Mesh Nets / walls and floor by scratching with wire brushes at Jaighati complete all as specified and as directed. \nNotes : \n1. The Contractor has to make arrangements for closing / diverting flowing water of Jai Nullah using mechanical means viz. JCB etc. before the cleaning commences and making good the disturbed surface after the cleaning process ends all as directed. \n2. The area upto 15 metres from the outer walls of the Sump shall be cleaned by removing the silt / sand / pebbles / stones etc. deposited / accumulated using mechanical means viz. JCB etc. and the excavated material shall be removed to a distance not exceeding 100 metres all as directed.\n3. The Quoted Rates shall be deemed to be inclusive of the above mentioned aspects and nothing extra from the department shall be admissible on this account. | 1 | Each Job | |
| 147 | 34 | Masonry Valve Pit with PCC 1:4:8 type D-2 as in foundation, Brick Work 23cm thick in CM 1:4, 15mm thick plaster in CM 1:4 internally and flush pointing in same mortar as the work proceeds externally, 40mm thick flooring in PCC 1:2:4 type B-1 laid over 75mm thick hard core, top cover shall be made out of MS sheet 10 SWG thickness fixed in angle iron frame made out of angle size 40 x 40 x 6mm with 12mm dia handle and two number hinges on one side and locking arrangement at other side complete including painting with two coats of sythetic enamel paint over a coat of red oxide primer, complete including earth work, excavation, disposal of surplus spoil not exceeding 50m all as specified and directed of the following sizes :- | |||
| 148 | 34.01 | (a) 950mm x 950m x 950mm (internal dimension of chamber) | 6 | Each | |
| 149 | 34.02 | (b) 600mm x 600m x 950mm (internal dimension of chamber) | 6 | Each | |
| 150 | 34.03 | (c) 450mm x 450m x 700mm (internal dimension of chamber) | 8 | Each | |
| 151 | 35 | Material and labour for lagging to pipes used in iternal/external water supply pipe lines all round with, 25 mm thick bonded mineral wool performed "SPAPON" pipe sections of density 144 Kg/Cum conforming to IS 9842 complete all as specified and directd by Engineer-in-Charge of following sizes:- | |||
| 152 | 35.01 | (a) 200 mm bore | 20 | Running meter | |
| 153 | 35.02 | (b) 150 mm bore | 50 | Running meter | |
| 154 | 35.03 | (c) 100 mm bore | 20 | Running meter | |
| 155 | 35.04 | (d) 80 mm bore | 20 | Running meter | |
| 156 | 35.05 | (e) 50 mm bore | 60 | Running meter | |
| 157 | 35.06 | (f) 40 mm bore | 60 | Running meter | |
| 158 | 35.07 | (g) 25 mm bore | 70 | Running meter | |
| 159 | 35.08 | (h) 20 mm bore | 73 | Running meter | |
| 160 | 35.09 | (j) 15 mm bore | 55 | Running meter | |
| 161 | 36 | Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :-\n(a) Chemical analysis & physical observations :\nDescription : Whitish granules of\ngranular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) % , Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) %\nMercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems) (b) Strength in terms of quantity of chlorination chemical required to obtain free chlorine of 1 ppm per lakh litres of water :\nRequirement must be 100 gm. per one lakh litre of water to achieve 05-1.0 ppm Av. Cl. at injection point (Site and raw water quality variations may apply additionally).\n(c) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. \nMake : Purichlore / Mark Daxter / ALTOCH-Gp (Declivace Technologies Pvt Ltd) / Any E-in-C approved Make | 1500 | Kilogram | |
| 162 | 37 | Supply only Hypochlorous Acid (HOCL) for chlorination of drinking water disinfection solution having high residual effect, clear colour less and potent germicide non-corrosive and non-foaming, stable upto 100° C for drinking water as and when required in HDPE Jerrycans of 35 litres capacity having the following features :-\n(a) Potent germicide\n(b) Slim control\n(c) High residual effect to avoid contamination\n(d) Less hazardous\n(e) Work at low dosage in post disinfection\n(f) No after taste\n(g) Most reliable in operation\n(h) Eco friendly and biodegradable\nMake : Penta Water Treatment / Seacolor / Hygene Maddox People Care / Super-Chlor Total | 1500 | Litres | |
| 163 | 38 | Supply only Poly Aluminium Chloride Powder AC / 1005 suitable for treatment of raw water, complete all as specified & directed. \nMake : Acuro Organics Limited / Chemtex Speciality Limited / Akshar Exim Company Pvt Ltd | 1500 | Kilogram | |
| 164 | 39 | Supply only Calcium Hypochlorite (Bleaching Powder) Each bag 25 Kg pkt for water treatment all as specified and directed by Engineer-in-Charge Make : Suvidhi Industries/ Arihant Chemical/Choice Organochem / Ama Speciality India/ AB Enterprises/Banke Behari Chemicals | 1500 | Kilogram | |
| 165 | 40 | Supply only Solid Ferric Alum suitable for treatment of Raw water all as specified and directed by Engineer-in-Charge Make : Arihant Chemical/Shri Krishna Enterprises/Actuate Chemical Industries/Ama Speciality India | 2500 | Kilogram |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
