Repairing And Rewinding Of Monoblock/Centrifugal Motor Pump Set At Section Nandauti Under Sub Division Nandauti
Tender Value
2 Lakhs
Estimated cost
Bid Submission
12 Oct 2020
0 days left
EMD
2000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
TODABHIM → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairing And Rewinding Of Monoblock/Centrifugal Motor Pump Set At Section Nandauti Under Sub Division Nandauti
BOQ
| Name of Work:Work of repairing and rewinding of monoblock/ centrifugal pump set at section Nadauti under Sub Division Nadauti. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART (A): REPAIR AND REWINDING OF MONOBLOCK/CENTRIFUGAL PUMPS | |||
| 2 | 1.01 | Rewinding of three phase squirrel cage induction motor of Monoblock pump sets including all necessary material and of the same characteristics as original with required size of super enameled copper wire (including cost of copper wire),'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including transportation of motor pump to and from Div/AEn/JEn store complete as per direction of engineer in charge. | |||
| 3 | 1.02 | 3 H.P. | 1 | each | |
| 4 | 1.03 | 5 H.P. | 1 | each | |
| 5 | 1.04 | 7.5 HP | 1 | each | |
| 6 | 1.05 | 10.00 HP | 1 | each | |
| 7 | 1.06 | 12.5 HP | 1 | each | |
| 8 | 1.07 | 15.00 HP | 1 | each | |
| 9 | 1.08 | 17.50 HP | 1 | each | |
| 10 | 1.09 | 20.00 HP | 1 | each | |
| 11 | 2 | SUPPLY & FIXING OF SPARE PARTS FOR MONOBLOCK/CENTRIFUGAL PUMPSET (MOTOR + PUMP) | |||
| 12 | 2.01 | Connection Plates | |||
| 13 | 2.02 | up to 10 HP | 1 | each | |
| 14 | 2.03 | 10 HP to 20 HP | 1 | each | |
| 15 | 3 | Cooling Fan | |||
| 16 | 3.01 | up to 10 HP | 1 | each | |
| 17 | 3.02 | 10 HP to 20 HP | 1 | each | |
| 18 | 4 | GM/SS bush | |||
| 19 | 4.01 | Upto 10 HP | 1 | each | |
| 20 | 4.02 | 10 HP to 20 HP | 1 | each | |
| 21 | 5 | Mechanical reconditioning of Bearing sheet | |||
| 22 | 5.01 | Upto 10 HP | 1 | each | |
| 23 | 5.02 | 10 HP to 20 HP | 1 | each | |
| 24 | 6 | Mechanical reconditioning ofImpeller sheet and Key way slot | |||
| 25 | 6.01 | Upto 10 HP | 1 | each | |
| 26 | 6.02 | 10 HP to 20 HP | 1 | each | |
| 27 | 7 | Oil seal | |||
| 28 | 7.01 | Upto 10 HP | 1 | each | |
| 29 | 7.02 | 10 HP to 20 HP | 1 | each | |
| 30 | 8 | Labour charge for opening and fitting of pump sets | |||
| 31 | 8.01 | Upto 10 HP | 1 | each | |
| 32 | 8.02 | 10 HP to 20 HP | 1 | each | |
| 33 | 9 | Rewinding of three phase squirrel cage induction motor of HSC pump sets including all necessary material and of the same characteristics as original with required size of super enamelled copper wire (including cost of copper wire) 'E' class insulation material and testing of motor on no load but to be guaranteed against testing on load at site, including making electric connection at site of installation of motor with starter, alignment with pump sets and transportation to and fro from installation site complete as per direction of engineer in charge at site. | |||
| 34 | 9.01 | Above 15.00 HP but upto 17.50 HP | 1 | each | |
| 35 | 9.02 | Above 17.50 HP but upto 20.00 HP | 1 | each | |
| 36 | 9.03 | Above 20.00 HP but upto 25.00 HP | 1 | each | |
| 37 | 9.04 | Above 25.00 HP but upto 30.00 HP | 1 | each | |
| 38 | 9.05 | Above 30.00 HP but upto 35.00 HP | 1 | each | |
| 39 | 9.06 | Above 35.00 HP but upto 40.00 HP | 1 | each | |
| 40 | 9.07 | Above 40.00 HP but upto 45.00 HP | 1 | each | |
| 41 | 9.08 | Above 45.00 HP but upto 50.00 HP | 1 | each | |
| 42 | 9.09 | Above 50.00 HP but upto 60.00 HP | 1 | each | |
| 43 | 9.1 | Above 60.00 HP but upto 75.00 HP | 1 | each | |
| 44 | 9.11 | Above 75.00 HP but upto 100.00 HP | 1 | each | |
| 45 | 10 | SUPPLY & FIXING OF SPARE PARTS HSC PUMP SETS (MOTOR + PUMP) | |||
| 46 | 10.01 | Connection Plates | |||
| 47 | 10.02 | 5 HP to 20 HP | 1 | each | |
| 48 | 10.03 | 20 HP to 30 HP | 1 | each | |
| 49 | 10.04 | 30 HP to 50 HP | 1 | each | |
| 50 | 10.05 | Above 50 HP to 100 HP | 1 | each | |
| 51 | 11 | Cooling Fan | |||
| 52 | 11.01 | 5 HP to 20 HP | 1 | each | |
| 53 | 11.02 | 20 HP to 30 HP | 1 | each | |
| 54 | 11.03 | 30 HP to 50 HP | 1 | each | |
| 55 | 11.04 | Above 50 HP to 100 HP | 1 | each | |
| 56 | 12 | Fan Cover | |||
| 57 | 12.01 | 5 HP to 20 HP | 1 | each | |
| 58 | 12.02 | 20 HP to 30 HP | 1 | each | |
| 59 | 12.03 | 30 HP to 50 HP | 1 | each | |
| 60 | 12.04 | Above 50 HP to 100 HP | 1 | each | |
| 61 | 13 | G.M./SS Gland Guide Bush | |||
| 62 | 13.01 | 5 HP to 20 HP | 1 | each | |
| 63 | 13.02 | 20 HP to 30 HP | 1 | each | |
| 64 | 13.03 | 30 HP to 50 HP | 1 | each | |
| 65 | 13.04 | Above 50 HP to 100 HP | 1 | each | |
| 66 | 15 | Shaft with Sleeve Chuck Nut | |||
| 67 | 15.01 | 5 HP to 20 HP | 1 | each | |
| 68 | 15.02 | 20 HP to 30 HP | 1 | each | |
| 69 | 15.03 | 30 HP to 50 HP | 1 | each | |
| 70 | 15.04 | Above 50 HP to 275 HP | 1 | each | |
| 71 | 16 | Shaft Chuck Nut | |||
| 72 | 16.01 | 5 HP to 20 HP | 1 | P.Job | |
| 73 | 16.02 | 20 HP to 30 HP | 1 | P.Job | |
| 74 | 16.03 | 30 HP to 50 HP | 1 | P.Job | |
| 75 | 16.04 | Above 50 HP to 275 HP | 1 | P.Job | |
| 76 | 17 | G.M. Neck Ring | |||
| 77 | 17.01 | 5 HP to 20 HP | 1 | P.Job | |
| 78 | 17.02 | 20 HP to 30 HP | 1 | P.Job | |
| 79 | 17.03 | 30 HP to 50 HP | 1 | P.Job | |
| 80 | 17.04 | Above 50 HP to 100 HP | 1 | P.Job | |
| 81 | 18 | Bush Shaft Sleeve of G.M. | |||
| 82 | 18.01 | 5 HP to 20 HP | 1 | each | |
| 83 | 18.02 | 20 HP to 30 HP | 1 | each | |
| 84 | 18.03 | 30 HP to 50 HP | 1 | each | |
| 85 | 18.04 | Above 50 HP to 100 HP | 1 | each | |
| 86 | 19 | G.M. Gland Cover | |||
| 87 | 19.01 | 5 HP to 20 HP | 1 | each | |
| 88 | 19.02 | 20 HP to 30 HP | 1 | each | |
| 89 | 19.04 | 30 HP to 50 HP | 1 | each | |
| 90 | 19.05 | Above 50 HP to 100 HP | 1 | each | |
| 91 | 20 | S.S. Shaft (Non Magnetic) | |||
| 92 | 20.01 | 5 HP to 20 HP | 1 | each | |
| 93 | 20.02 | 20 HP to 30 HP | 1 | each | |
| 94 | 20.03 | 30 HP to 50 HP | 1 | each | |
| 95 | 20.04 | Above 50 HP to 100 HP | 1 | each | |
| 96 | 21 | G.M. Shaft Sleeve Check Nut | |||
| 97 | 21.01 | 5 HP to 20 HP | 1 | each | |
| 98 | 21.02 | 20 HP to 30 HP | 1 | each | |
| 99 | 21.03 | 30 HP to 50 HP | 1 | each | |
| 100 | 21.04 | Above 50 HP to 100 HP | 1 | each | |
| 101 | 22 | M.S. Shaft Check Nut | |||
| 102 | 22.01 | 5 HP to 20 HP | 1 | each | |
| 103 | 22.02 | 20 HP to 30 HP | 1 | each | |
| 104 | 22.03 | 30 HP to 50 HP | 1 | each | |
| 105 | 22.04 | Above 50 HP to 100 HP | 1 | each | |
| 106 | 23 | Cooling pipe set with nozzle & Nut | |||
| 107 | 23.01 | 5 HP to 20 HP | 1 | each | |
| 108 | 23.02 | 20 HP to 30 HP | 1 | each | |
| 109 | 23.03 | 30 HP to 50 HP | 1 | each | |
| 110 | 23.04 | Above 50 HP to 100 HP | 1 | each | |
| 111 | 24 | AIR Cock | |||
| 112 | 24.01 | 5 HP to 20 HP | 1 | each | |
| 113 | 24.02 | 20 HP to 30 HP | 1 | each | |
| 114 | 24.03 | 30 HP to 50 HP | 1 | each | |
| 115 | 24.04 | Above 50 HP to 100 HP | 1 | each | |
| 116 | 25 | JOB WORK FOR REPAIR OF PUMP MOTOR | |||
| 117 | 25.01 | Bearing Housing (rebuilding, turning & finishing) | |||
| 118 | 25.02 | 5 HP to 20 HP | 1 | P.JOB | |
| 119 | 25.03 | 20 HP to 30 HP | 1 | P.JOB | |
| 120 | 25.04 | 30 HP to 50 HP | 1 | P.JOB | |
| 121 | 25.05 | Above 50 HP to 100 HP | 1 | P.JOB | |
| 122 | 26 | Bearing Cap (rebuilding, turning & finishing) | |||
| 123 | 26.01 | 5 HP to 20 HP | 1 | P.JOB | |
| 124 | 26.02 | 20 HP to 30 HP | 1 | P.JOB | |
| 125 | 26.03 | 30 HP to 50 HP | 1 | P.JOB | |
| 126 | 26.04 | Above 50 HP to 100 HP | 1 | P.JOB | |
| 127 | 27 | Impeller Reconditioning for all type of Pump | |||
| 128 | 27.01 | 5 HP to 20 HP | 1 | Per Impeller | |
| 129 | 27.02 | 20 HP to 30 HP | 1 | Per Impeller | |
| 130 | 27.03 | 30 HP to 50 HP | 1 | Per Impeller | |
| 131 | 27.04 | Above 50 HP to 100 HP | 1 | Per Impeller | |
| 132 | 28 | Labour Charges for Dismantling & Assembling of Pump | |||
| 133 | 28.01 | 5 HP to 20 HP | 1 | P.JOB | |
| 134 | 28.02 | 20 HP to 30 HP | 1 | P.JOB | |
| 135 | 28.03 | 30 HP to 50 HP | 1 | P.JOB | |
| 136 | 28.04 | Above 50 HP to 100 HP | 1 | P.JOB | |
| 137 | 29 | Coupling with stud and rubber bush | |||
| 138 | 29.01 | 5 HP to 20 HP | 1 | Per Impeller | |
| 139 | 29.02 | 20 HP to 30 HP | 1 | Per Impeller | |
| 140 | 29.03 | 30 HP to 50 HP | 1 | Per Impeller | |
| 141 | 29.04 | Above 50 HP to 100 HP | 1 | Per Impeller | |
| 142 | 30 | Supply & Fixing of tyre coupling sets according to relevant IS code in Centrifugal couple pump sets of approved make Unit. This job also included re-alignment of centrifugal couple pump set after fixing of tyre coupling set as per directed by Engineer-in charge. | |||
| 143 | 30.01 | Type 14 Nos. set | 1 | Sets | |
| 144 | 30.02 | Type 15 Nos. set | 1 | Sets | |
| 145 | 30.03 | Type 16 Nos. set | 1 | Sets | |
| 146 | 30.04 | Type 17 Nos. set | 1 | Sets | |
| 147 | 31 | Supply and fixing Ball bearing of Various size for centrifugal/monoblock pump set of ISI Mark as per specification and approved make by EIC. | |||
| 148 | 31.01 | 6304 or equivalent size | 1 | each | |
| 149 | 31.02 | 6305 or equivalent size | 1 | each | |
| 150 | 31.03 | 6306 or equivalent size | 1 | each | |
| 151 | 31.04 | 6307 or equivalent size | 1 | each | |
| 152 | 31.05 | 6308 or equivalent size | 1 | each | |
| 153 | 31.06 | 6309 or equivalent size | 1 | each | |
| 154 | 31.07 | 6310 or equivalent size | 1 | each | |
| 155 | 31.08 | 6311 or equivalent size | 1 | each | |
| 156 | 31.09 | 6312 or equivalent size | 1 | each | |
| 157 | 31.1 | 6316 or equivalent size | 1 | each | |
| 158 | 31.11 | 6317 or equivalent size | 1 | each | |
| 159 | 31.12 | 6318 or equivalent size | 1 | each | |
| 160 | 31.13 | 6319 or equivalent size | 1 | each | |
| 161 | 31.14 | NU319C or equivalent size | 1 | each | |
| 162 | 32 | Copper Wire | |||
| 163 | 32.01 | Suuplying of super enamal copper wire suitable for rewindind of induction motor (only procured for motor rewinding) | 1 | Kg | |
| 164 | 33 | Preventive Mintenance | |||
| 165 | 33.01 | Routine maintenance of centrifugal coupled pump and motor including opening, cleaning, greasing and refitting / changing of ball bearing if required, gland refilling and replacing all rusted studs, replacing rubber bushes & coupling nut & bolts for coupling pulley, tightening all nut & bolts of foundation, baseplate, pump & motor etc. Checking & correcting alignment of pump & motor including necessary materials i.e. grease, nut & bolts, studs, washers, gland packing and rubber bushes etc. work done at site complete job | |||
| 166 | 33.02 | 5 HP to 20 HP | 1 | per Job | |
| 167 | 33.03 | 20 HP to 30 HP | 1 | per Job | |
| 168 | 33.04 | Above 30 HP and up to 50 HP | 1 | per Job | |
| 169 | 33.05 | Above 50 HP and up to 100 HP | 1 | per Job | |
| 170 | 34 | Cleaning of house | |||
| 171 | 34.01 | Cleaning of pump house by air blower/ vacuum cleaner or other means including removing of JALA from ceiling and walls etc. complete Job. | 1 | per Job | |
| 172 | 35 | Cleaning of electric panel | |||
| 173 | 35.01 | Cleaning of Electric Panel PMCC by air blower/vacuum cleaner or other means including tightening of loose connections etc. complete job. | 1 | Per Panel | |
| 174 | 36 | Replacing of damaged/broken gland packing plate with new gland packing plate suitable for centrifugal pump shafts and nut&bolts etc. complete job. | |||
| 175 | 36.01 | 5 HP to 20 HP | 1 | per Job | |
| 176 | 36.02 | Above 20 HP and up to 30 HP | 1 | per Job | |
| 177 | 36.03 | Above 30 HP and up to 50 HP | 1 | per Job | |
| 178 | 36.04 | Above 50 HP and up to 100 HP | 1 | per Job |
AI Tender Summary
Tender Timeline
Oct 05, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender