Repairing Of 10 Kva To 100 Kva Damaged T/F At C . T . R . Workshop , Dhampur, Meerut-Uttar Pradesh

TDR : 25619609

Tender Notice
BOQ

Expired

Meerut , Uttar Pradesh

Tender Brief : Repairing Of 10 Kva To 100 Kva Damaged T/F At C . T . R . Workshop , Dhampur

Document Fees
₹ 3540 /-

EMD
₹ 32000.0 /-

Tender Value
₹ 32 Lakhs /-

Submission Date
13/10/2020

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work: REPAIR AND TESTING OF 10-250 KVA DAMAGED DISTRIBUTION TRANSFORMERS AT C.T.R. WORKSHOP DHAMPUR
1	1.01	Shifting, dragging and stacking of damaged T/fs to be repaired in the workshop at proper place in cutting yard & pre-checking/ physical inspection, testing of transformer before dismantling i.e. Megger Test (if OK) then HV Test (if OK) then No-Load & Load Losses Tests as per instructions of Junior Engineer in charge. \n\n(i) 10/16 KVA	item1	100	No.
2	1.02	(ii) 25 KVA	item2	900	No.
3	1.03	(iii) 63 KVA	item3	400	No.
4	1.04	(iv) 100 KVA	item4	250	No.
5	2.01	Cutting of sealed T/fs top cover/ opening of nut and bolt of damaged t/f cover plate, de- tanking of core coil assembly dismantling of HV&LV Coils and other accessories, draining of T/f oil in sump well and weighing of scraps and shifting of all scrap to the store of JE in charge.\n\n(i) 10/16 KVA	item5	100	No.
6	2.02	(ii) 25 KVA	item6	900	No.
7	2.03	(iii) 63 KVA	item7	400	No.
8	2.04	(iv) 100 KVA	item8	250	No.
9	3.01	Dismantling of core stamping and its cleaning of dust and dirt.\n\n(i) 10/16 KVA	item9	100	No.
10	3.02	(ii) 25 KVA	item10	900	No.
11	3.03	(iii) 63 KVA	item11	400	No.
12	3.04	(iv) 100 KVA	item12	250	No.
13	4.01	Assembly of core coils and fitting of other accessories requiring replacement such as press board support spacers and tapping etc. and also cutting of insulation required for coil assembly.\n\n(i) 10/16 KVA	item13	100	No.
14	4.02	(ii) 25 KVA	item14	900	No.
15	4.03	(iii) 63 KVA	item15	400	No.
16	4.04	(iv) 100 KVA	item16	250	No.
17	5.01	Dragging of T/f Tank to washing Zone its cleaning by jet pump and washing by caustic soda shifting to open space for drying Providing primer of red oxide on the inner and outer side of tank and painting inner side of T/fs including core channel and tie rod / core rods with heat proof zinc chromate paint and out side with two coats of synthetic grey enamel paint. The paint should be of Asian/Nerolec/Burger/ Dulux/British make only. Writing of PUC/ Unique No. of transformer readable paint color with the help of stencils design.\n\n(i) 10/16 KVA	item17	100	No.
18	5.02	(ii) 25 KVA	item18	900	No.
19	5.03	(iii) 63 KVA	item19	400	No.
20	5.04	(iv) 100 KVA	item20	250	No.
21	6.01	Making of new HV coil from new wire / strip as per design of respective T/F (Complete Job)\n\n(i) 10/16 KVA	item21	100	No.
22	6.02	(ii) 25 KVA	item22	900	No.
23	6.03	(iii) 63 KVA	item23	400	No.
24	6.04	(iv) 100 KVA	item24	250	No.
25	7.01	Making of new LV coil from new wire / strip as per design of respective T/F (Complete Job)\n\n(i) 10/16 KVA	item25	100	No.
26	7.02	(ii) 25 KVA	item26	900	No.
27	7.03	(iii) 63 KVA	item27	400	No.
28	7.04	(iv) 100 KVA	item28	250	No.
29	8.01	Complete the core and coil assembly(CCA) by fitting HV & LV coils required insulating material and shifting it to oven for de-moisture \n\n(i) 10/16 KVA	item29	100	No.
30	8.02	(ii) 25 KVA	item30	900	No.
31	8.03	(iii) 63 KVA	item31	400	No.
32	8.04	(iv) 100 KVA	item32	250	No.
33	9.01	Tanking of the complete core and coil assembly (CCA) in to the painted tank safely, filling of reclaimed / centrifuged/ fresh oil fitting of all accessories. \n\n(i) 10/16 KVA	item33	100	No.
34	9.02	(ii) 25 KVA	item34	900	No.
35	9.03	(iii) 63 KVA	item35	400	No.
36	9.04	(iv) 100 KVA	item36	250	No.
37	10.01	Welding/ Tightening of nut and bolts of top cover of repaired T/f by electric welding filling Gap etc. properly including denting of tank if necessary and welding of MS plate 100x50x3 mm thick on the out side of the T/Fs contain unique no., capacity, name of the workshop etc. at proper place .\n\n(i) 10/16 KVA	item37	100	No.
38	10.02	(ii) 25 KVA	item38	900	No.
39	10.03	(iii) 63 KVA	item39	400	No.
40	10.04	(iv) 100 KVA	item40	250	No.
41	11.01	Dragging the Repaired T/f to the testing zone for final testing with necessary record and after testing it should be re dragged / stacked at despatch area. \n\n(i) 10/16 KVA	item41	100	No.
42	11.02	(ii) 25 KVA	item42	900	No.
43	11.03	(iii) 63 KVA	item43	400	No.
44	11.04	(iv) 100 KVA	item44	250	No.
45	12	General Cleaning of T&P / Machinery and stacking of material at suitable place	item45	300	Days
46	13	General clearness of store testing room, workshop floor, oven area, generator room, in cutting area, tanking area, assembly area, painting area by wiping, booming and wooden dust properly to keep floor clean by engaging proper man power for cleaning works. As required for cleaning works	item46	300	Days

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Uttar Pradesh Tenders

Electrical Industry Tenders

Transformers Tenders

Transformer Repair Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Repairing Of 10 Kva To 100 Kva Damaged T/F At C . T . R . Workshop , Dhampur, Meerut-Uttar Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work: REPAIR AND TESTING OF 10-250 KVA DAMAGED DISTRIBUTION TRANSFORMERS AT C.T.R. WORKSHOP DHAMPUR
	Sl.No.	Description of Works	Item Code	Tendered Quantity	Unit
1	1.01	Shifting, dragging and stacking of damaged T/fs to be repaired in the workshop at proper place in cutting yard & pre-checking/ physical inspection, testing of transformer before dismantling i.e. Megger Test (if OK) then HV Test (if OK) then No-Load & Load Losses Tests as per instructions of Junior Engineer in charge. \n\n(i) 10/16 KVA	item1	100	No.
2	1.02	(ii) 25 KVA	item2	900	No.
3	1.03	(iii) 63 KVA	item3	400	No.
4	1.04	(iv) 100 KVA	item4	250	No.
5	2.01	Cutting of sealed T/fs top cover/ opening of nut and bolt of damaged t/f cover plate, de- tanking of core coil assembly dismantling of HV&LV Coils and other accessories, draining of T/f oil in sump well and weighing of scraps and shifting of all scrap to the store of JE in charge.\n\n(i) 10/16 KVA	item5	100	No.
6	2.02	(ii) 25 KVA	item6	900	No.
7	2.03	(iii) 63 KVA	item7	400	No.
8	2.04	(iv) 100 KVA	item8	250	No.
9	3.01	Dismantling of core stamping and its cleaning of dust and dirt.\n\n(i) 10/16 KVA	item9	100	No.
10	3.02	(ii) 25 KVA	item10	900	No.
11	3.03	(iii) 63 KVA	item11	400	No.
12	3.04	(iv) 100 KVA	item12	250	No.
13	4.01	Assembly of core coils and fitting of other accessories requiring replacement such as press board support spacers and tapping etc. and also cutting of insulation required for coil assembly.\n\n(i) 10/16 KVA	item13	100	No.
14	4.02	(ii) 25 KVA	item14	900	No.
15	4.03	(iii) 63 KVA	item15	400	No.
16	4.04	(iv) 100 KVA	item16	250	No.
17	5.01	Dragging of T/f Tank to washing Zone its cleaning by jet pump and washing by caustic soda shifting to open space for drying Providing primer of red oxide on the inner and outer side of tank and painting inner side of T/fs including core channel and tie rod / core rods with heat proof zinc chromate paint and out side with two coats of synthetic grey enamel paint. The paint should be of Asian/Nerolec/Burger/ Dulux/British make only. Writing of PUC/ Unique No. of transformer readable paint color with the help of stencils design.\n\n(i) 10/16 KVA	item17	100	No.
18	5.02	(ii) 25 KVA	item18	900	No.
19	5.03	(iii) 63 KVA	item19	400	No.
20	5.04	(iv) 100 KVA	item20	250	No.
21	6.01	Making of new HV coil from new wire / strip as per design of respective T/F (Complete Job)\n\n(i) 10/16 KVA	item21	100	No.
22	6.02	(ii) 25 KVA	item22	900	No.
23	6.03	(iii) 63 KVA	item23	400	No.
24	6.04	(iv) 100 KVA	item24	250	No.
25	7.01	Making of new LV coil from new wire / strip as per design of respective T/F (Complete Job)\n\n(i) 10/16 KVA	item25	100	No.
26	7.02	(ii) 25 KVA	item26	900	No.
27	7.03	(iii) 63 KVA	item27	400	No.
28	7.04	(iv) 100 KVA	item28	250	No.
29	8.01	Complete the core and coil assembly(CCA) by fitting HV & LV coils required insulating material and shifting it to oven for de-moisture \n\n(i) 10/16 KVA	item29	100	No.
30	8.02	(ii) 25 KVA	item30	900	No.
31	8.03	(iii) 63 KVA	item31	400	No.
32	8.04	(iv) 100 KVA	item32	250	No.
33	9.01	Tanking of the complete core and coil assembly (CCA) in to the painted tank safely, filling of reclaimed / centrifuged/ fresh oil fitting of all accessories. \n\n(i) 10/16 KVA	item33	100	No.
34	9.02	(ii) 25 KVA	item34	900	No.
35	9.03	(iii) 63 KVA	item35	400	No.
36	9.04	(iv) 100 KVA	item36	250	No.
37	10.01	Welding/ Tightening of nut and bolts of top cover of repaired T/f by electric welding filling Gap etc. properly including denting of tank if necessary and welding of MS plate 100x50x3 mm thick on the out side of the T/Fs contain unique no., capacity, name of the workshop etc. at proper place .\n\n(i) 10/16 KVA	item37	100	No.
38	10.02	(ii) 25 KVA	item38	900	No.
39	10.03	(iii) 63 KVA	item39	400	No.
40	10.04	(iv) 100 KVA	item40	250	No.
41	11.01	Dragging the Repaired T/f to the testing zone for final testing with necessary record and after testing it should be re dragged / stacked at despatch area. \n\n(i) 10/16 KVA	item41	100	No.
42	11.02	(ii) 25 KVA	item42	900	No.
43	11.03	(iii) 63 KVA	item43	400	No.
44	11.04	(iv) 100 KVA	item44	250	No.
45	12	General Cleaning of T&P / Machinery and stacking of material at suitable place	item45	300	Days
46	13	General clearness of store testing room, workshop floor, oven area, generator room, in cutting area, tanking area, assembly area, painting area by wiping, booming and wooden dust properly to keep floor clean by engaging proper man power for cleaning works. As required for cleaning works	item46	300	Days

Repairing Of 10 Kva To 100 Kva Damaged T/F At C . T . R . Workshop , Dhampur, Meerut-Uttar Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us