Military Engineer Services-MES has published Provision Of Room For Laundry Including Equipments Under Ge Dipatoli. Submission Date for this Tender is 15-10-2020. Kitchen Equipment Tenders in Dipatoli Cantt Jharkhand. Bidders can get complete Tender details and download the document.
| Name of Work: PROVN OF ROOM FOR LAUNDRY INCLUDING EQUIPMENTS UNDER GE DIPATOLI. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep and getting out in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out. complete all as specified and directed. | 15 | Cum | |
| 2 | 2 | Removing excavated material to a distance n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. | 6 | Cum | |
| 3 | 3 | Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc.25 cm complete all as specified and directed. | 9 | Cum | |
| 4 | 4 | M&L Cement concret(1:4:8) Type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. | 5 | Cum | |
| 5 | 5 | M&L Reinforced Cement concrete M-25 ( Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified.\n | 4 | Cum | |
| 6 | 6 | M&L Reinforced Cement concrete M-25 ( Design Mix) as in columns, pillars, piers, posts and struts complete all as specified and directed. | 3 | Cum | |
| 7 | 7 | M&L Reinforced Cement concrete in cement concrete M-25 ( Design Mix) as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified.\n | 5 | Cum | |
| 8 | 8 | M&L Reinforced Cement concrete M-25 ( design mix) as in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. | 4 | Cum | |
| 9 | 9 | M&L precast cement concrete type B-1 (1:2:4) using 20mm graded stone aggregates, as in man hole cover slabs, shelves, and similar work set in CM (1:4).complete all as specified and directed. | 0.3 | Cum | |
| 10 | 10 | Use and waste of Formwork to sides of Square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions surfaces finished fair as per clause 4.11.16.2 (a) of SSR Part I complete all as specified.\n | 30 | Sqm | |
| 11 | 11 | Use and waste Formwork to flat sides and soffits of floor or roof beams, beam haunchings, girders,bresumers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. surfaces finished fair complete all as specified.\n | 30 | Sqm | |
| 12 | 12 | Use and waste of formwork to fair surfaces of sides of concrete foundations, footings, bases of columns , raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work; vertical or to batter surfaces finished fair in forms complete all as specified.\n\n | 40 | Sqm | |
| 13 | 13 | Use and waste of Form work to flat soffits of suspended slabs, floor slabs, landings and similar work; not exceeding 200 mm thick ( Horizontal or sloping) surfaces finished fair in forms complete all as specified.\n | 30 | Sqm | |
| 14 | 14 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs sides of RCC/PCC bands in walls , horizontal or sloping and similar work exc 10cm but n exc 20 cm wide, surfaces finished fair in forms complete all as specified. | 40 | RM | |
| 15 | 15 | M&L Mild steel deformed or twisted bars ( TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.\n | 1352 | Kg | |
| 16 | 16 | M&L Mild steel deformed or twisted bars ( TMT) 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.\n | 400 | Kg | |
| 17 | 17 | M&L Mild steel bars ( TMT deformed/twisted) 8mm dia. and over up to and including 10 mm dia. in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or securing with clips complete all as specified. | 400 | Kg | |
| 18 | 18 | M &L for brickwork with sub-class 'B' old size bricks, straright or corved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. | 15 | Cum | |
| 19 | 19 | M&L Brickwork with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. | 3 | Sqm | |
| 20 | 20 | Supply only liquid water proofing compound complete all as specified and directed. | 6 | Ltr | |
| 21 | 21 | M&L roof treatment for non approachable roof complete all as specified and directed comprising of followings:- (i) Rendering 10mm thick in cement mortor (1:3) mixed with liquid water proofing compound finished the surface fair and even.(ii) Applying evenly a coat of bitumen primer @ 0.30 Kg/Sqm. (iii)Applying APP modified polymeric membrane over the bitumen coat surface ,weight not less than 3.20-3.50 Kg/Sqm and over lap 100mm and sealed by torch application as per manufacture insteructions. (iv) Applying a coat of aluminium paint @ 200 gm/sqm in two coats over polymeric membrene. | 30 | Sqm | |
| 22 | 22 | Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood. Undergrowth and carring away rubbish to a distance of not exc 50 metre complete all as specified and directed. | 45 | Sqm | |
| 23 | 23 | M&L sand filling under floors or in foundation including watering and consolidation (with lead of 50 m. for sand) complete all as specified and directed. | 2 | Cum | |
| 24 | 24 | M&L Moorum/ red bajri filling in floors or pavings, laid in floors n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. | 4 | Cum | |
| 25 | 25 | M&L for 100mm thickPCC(1:4:8) type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. | 25 | Sqm | |
| 26 | 26 | M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded stone aggregates, as in plinth protection and path etc finished cement concrete surface even and smooth without using extra cement all as specified. | 20 | Sqm | |
| 27 | 27 | M&L Machine cut kota stone slab flooring 18-20 mm thick set over and including 15mm thick screed base in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete all as specified and directed. | 25 | Sqm | |
| 28 | 28 | All as per item No-27 but here-in-before as in skirting set over and including 10mm thick cement plaster in CM 1:6 complete all as specified and directed.. | 3 | Sqm | |
| 29 | 29 | M&L white marble stone slab flooring 18-20 mm thick set over and including 15mm thick cement sceed base in CM 1:6 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with beewax polishing complete as a boarder in the kota stone floorig all as specified and directed. | 3 | Sqm | |
| 30 | 30 | M&L Machine cut cuddapa stone slab 20-25 mm thick, laid over 15mm thick CM (1:6) cement screed base, laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed. | 4 | Sqm | |
| 31 | 31 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified \n\n | 50 | Sqm | |
| 32 | 32 | M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4, mixed with using liquid water proofing compound complete all as specified ), top surfaces finished even and smooth without using extra cement complete all as specified and directed.\nNote :- WPC measured and paid separately\n | 60 | Sqm | |
| 33 | 33 | M&L rendering 10mm thick in cement mortar I:3 on fair face of cement concrete on ceiling, finished surface even and smooth without using extra cement complete all as specified \n | 30 | Sqm | |
| 34 | 34 | M&L applying three coat of white wash on newly plastered surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified . | 50 | Sqm | |
| 35 | 35 | M&L two coats distempering with cement base paint , white or tinted over a coat of cement base primer on new surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n\n | 60 | Sqm | |
| 36 | 36 | M&L preparation of new plastered or unplastered surafces of ceilings and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .\n\n | 30 | Sqm | |
| 37 | 37 | M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in bed block for hold fast & filling in pressed steel door frame complete all as specified . | 0.15 | Cum | |
| 38 | 38 | M&L for prepration of new steel surface not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified . | 10 | Sqm | |
| 39 | 39 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified. | 6 | Sqm | |
| 40 | 40 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovatailed or welded as per IS.1038:1983 (Amendment No.3 of May 2009) complete all as specified . | 4 | Sqm | |
| 41 | 41 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovatailed or welded as per IS.1038:1983 (Amendment No.3 of May 2009) complete all as specified . | 4 | Sqm | |
| 42 | 42 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified.\n | 20 | Kg | |
| 43 | 43 | S&F Steel ventilator with top hung shutter incl. box type hinges with steel handle and steel peg stays complete with glazing bars welded as per IS.1038:1983 (Amendment No.3 of May 2009) complete all as specified. | 2 | Sqm | |
| 44 | 44 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified. | 3 | Sqm | |
| 45 | 45 | M&L Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average with of aperture 1.4mm and fixed withtinnwdtack, or galvanised wire staples complete all as specified. | 4 | Sqm | |
| 46 | 46 | S & F framed work as in door or gates of angle or other section with gusset plates rails, braces etc. Complete,drilled for fixing of steel sheeting or other covering.Door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering) and hanging,also fastening and fixing complete all as specified. | 200 | Kg | |
| 47 | 47 | M&L Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed. | 2 | Sqm | |
| 48 | 48 | S&F Plain framed, panelled shutter (two panel) factory made 35 mm thick of 2nd class HW rail and stylewith lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), Kiln seasoned and chemically pressure treated,. complete all as specified and directed. | 2 | Sqm | |
| 49 | 49 | S&F Aluminium anodised barrel tower bolt 150mm long complete all as specified and directed. | 4 | Each | |
| 50 | 50 | S&F Aluminium alloy,anodised handle cast type of size 125mm complete all as specified and directed. | 4 | Each | |
| 51 | 51 | S&F Aluminium alloy, anodised sliding door bolt of size 250mm with hasp and staple and fixing clips of sheet complete all as specified and directed. | 1 | Each | |
| 52 | 52 | M/L Butt hinges medium weight, cold rolled mild steel,and fixed 100mm long complete all as specified and directed. | 6 | Each | |
| 53 | 53 | M&L Cement concret(1:3:6) TypeC-2 using 40mm graded stone aggregate as in surface channel and drain complete all as specified and directed. | 1 | Cum | |
| 54 | 54 | M&L Extra for forming fair finished drain or channel 30cm inner girth in cement concrete,using extra cement,including forms,mitred/stopped ends etc. complete all as specified and directed. | 30 | RM | |
| 55 | 55 | S&F 15mm dia. Unplasticised PVC pipes of pressure rating 10 kg/cm2 fixed complete to walls,ceillings or in floors etc. complete all as specified and directed. | 15 | RM | |
| 56 | 56 | S&F 20mm dia. Unplasticised PVC pipes of pressure rating 10 kg/cm2 fixed complete to walls,ceillings or in floors etc. complete all as specified and directed. | 20 | RM | |
| 57 | 57 | S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.\n | 1 | Each | |
| 58 | 58 | S&F Gunmetal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.\n | 1 | Each | |
| 59 | 59 | S&F Stop valves, fancy type, cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified \n | 1 | Each | |
| 60 | 60 | S&F Chromium plated Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified .\n\n | 2 | Each | |
| 61 | 61 | S&F Ball brass valves, high pressure, with polyethylene float and flynut complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.\n\n | 2 | Each | |
| 62 | 62 | S&F Rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity ,hoisted and fixed in position complete all as specified.\n\n | 2 | Each | |
| 63 | 63 | M&L PVC(SWR) pipes 110mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall complete all as specified. | 10 | RM | |
| 64 | 64 | M&L PVC (SWR) bend any radius 110mm dia complete all as specified. | 4 | Each | |
| 65 | 65 | M&L PVC(SWR) Tee any radius 110mm dia complete all as specified. | 2 | Each | |
| 66 | 66 | Supply, Installation, testing and commisioning of Electric driven and Integral Electric heated, Industrial Washer cum Extractor capacity 15 Kg per cycle suitable for running on 3 Phase 415 Volts 50 Hz, including all necessary accessories and components, mounted on self supporting Rust proof frame with not less than 2 mm thick stainless steel body and all components of rust proof materials duly compatible for climatic conditions at Ranchi. The machine shall be soft mounted and operatable to apply a minimum G force with following features complete all as specified ans as per manufacturer's instructions:- \nMake :- Electrolux /Stefab/ Fagor/Unimac / Fabcare / Super shine / Nagarjun as approved by the GE.\n\n\n\n | 1 | Each | |
| 67 | 66.1 | Washer cylinder- For washing, cleaning and extraction Capacity -15 kg/cycle, complete Electric driven and heated, front loading, Heavy duty, Heavy-duty hot dip galvanized section frame, heavy-duty rear gable and bearing support. Both the inner and outer wash cylinders shall be constructed entirely using 2.0 mm thick stainless steel grade 304. | 66.1 | ||
| 68 | 66.2 | Control :- It shall have controlling panel with push button for selection of features. | 66.2 | ||
| 69 | 66.3 | Detergent supply :- The machines shall be available for use with powder or liquid detergents fed via integrated detergent dispensers . \n | 66.3 | ||
| 70 | 66.4 | Safety features:- All machines shall be equipped with necessary safety-interlock and warnings on the loading door. | 66.4 | ||
| 71 | 66.5 | Auto weighing :- Automatic linen weighing system for automatic adjustment of water and soap consumptions as well as energy savings, according to the load inserted, measured automatically by the washer). | 66.5 | ||
| 72 | 66.6 | Drive system :- The machine shall have a motor powered by a VVVFdrive /VFD .There shall be no gearboxes, clutches or drive reducers. \n | 66.6 | ||
| 73 | 66.7 | Door Opening: - front loading not less than 400 mm Ø | 66.7 | ||
| 74 | 67 | Suppy, install test and commisoning of Fully automatic Industrial Tumble Dryer 15 Kg linen Capacity Electric driven and Electric heated, with integrated heating assembly, suitable for running on 3 Phase 415 Volts 50 Hz, incl all necessary accessories and components, mounted on self supporting Rust proof frame with complete stainless steel body n.less than 2.0 mm thick and all components of rust proof materials duly compatible for climatic conditions at Ranchi with following features \nMake :- Electrolux /Stefab/ Fagor/Unimac. Fabcare / Super shine / Nagarjun as approved by the GE. \n\n | 1 | Each | |
| 75 | 67.1 | DRYING TUMBLER:- Capacity – 15 kg Integral Electric heated, electric vented, Heavy duty, Front Loading, Cool down Feature, Auto-timed, Auto/manually-reversible dual Motor drive, Open Pocket & Front display. The dryer should be with temperature control system and the drum suspension Should have sealed self-lubricated bearings. | 67.1 | ||
| 76 | 67.2 | Control :- Adjustable parameters such as temperature, programmes and cool down time and also the feature to control the residual moisture control in the linen. Temperature and time Controller shall be Auto digital control with software for minimization of the cost and maximization of the up time of the equipment, which shall be able to capture features of a customised process and the drying programme shall be user friendly for editing/erasing preset programmes. Drum–Inner and outer drum should be made of Stainless steel, 2 mm thick. | 67.2 | ||
| 77 | 67.3 | Safety features :- The tumble dryer should be equipped with overheating protection and a temperature sensor that turns off the heat if the air flow is clogged. \n | 67.3 | ||
| 78 | 67.4 | Door Lock :- The dryer should have a safety function or feature , which means the dryer should stops in case the door is opened during operation. Transmission: The transmission should have pulley and belt or direct drive. There should be no Gearboxes ,clutches or gear reducers and the motor shall have VVVF /VF drive. \n | 67.4 | ||
| 79 | 67.5 | Door :- Made of die pressed Stainless steel AISI not less than 2mm thick, Toughened glass window , SS door latch/handle and interlock for safety. \n | 67.5 | ||
| 80 | 67.6 | Suction Blower :- Heavy duty Centrifugal Suction Blower and dynamically balanced. Lint Screen - Self cleaning lint screen, facility of cleaning should be through front | 67.6 | ||
| 81 | 68 | Suppy, installation, testing and commisoning Vaccum finising table utility shape for general purpose, with integral vacuum fan and steam electric iron and integral boiler, AC, 3 PHASE, 380-415V with Rectangular Vaccum Ironing table having Dimensions -1300mm (width)X 800mm(depth) X920mm(Height) complete all as specified and as directed.\nMake :- Fabcare / Stefab/ Super shine /Nagarjun as approved by the GE. | 1 | Each | |
| 82 | 69 | Supply installing , testing and commisioning stream cum electric press complete all as specified and as directed. \nMake :- Electrolux /Stefab/ Fagor/Unimac. Fabcare / Super shine / Nagarjun as approved by the GE. | 1 | Each | |
| 83 | 70 | Supply installing , testing and commisioning Electrical stream boiler operate at AC, 3 PHASE, 380-415V, 50 Hz suitable for operating Mechanical laundry consisting as per item No 66 to 69 complete all as specified and as directed.\nMake :-Thermax or other Equivalent make as approved by the GE. | 1 | Each | |
| 84 | 71 | M&L for CPVC pipe, ISI Marked of required size and of approved make as per requirement of plant with required fittings complete for Water lines for connection from source to individual machines like washer extractor, drier, flat bed press, ironing table with standard size pipe lines/cables as per manufacturers recommendations for efficient functioning of the equipments complete as directed. \n | 1 | Each Job | |
| 85 | 72 | Supply and fix MCB DB, TPN 8 way IP 43 protection ,double door , concealed on wall complete all as specified and as directed.\nMake : Indo Asian/Legrand /L & T / Standard/ Havell's/HPL as approved | 1 | Each | |
| 86 | 73 | S&F distribution board SPN 230 volt, 4 way, double door type, concealed on wall suitable for MCB DP incomer and SP outgoing complete all as specified and as directed.\nMake Indo asian /Legrand/L &T/Standard /HPL as approved. | 1 | Each | |
| 87 | 74 | Supply and fix MCB of follwing rating with necessary lugs for incomming and outgong connections fixed on DB / Enclosure /Panel Boards complete all as specified and directed. \nMake : Indo Asian/ Legrand / L & T /Standard/Havell's /HPL as approved. | 74 | ||
| 88 | 74.1 | MCB SP 6 to 32 Amp | 2 | Each | |
| 89 | 74.2 | MCB DP 6 to 32 Amp. | 1 | Each | |
| 90 | 74.3 | MCB 4 pole 6 to 32 Amp. | 4 | Each | |
| 91 | 75 | S & F sheet metal TP and neutral enclosure with one MCB TP 6 to 32 Amp and metal clad plug and socket ( rating of MCB Suitable as per machine/Load capacity ) Amp and concelaled on wall complete all as specified \n Make : Indo Asian/ Legrand / L & T /Standard/Havell's/HPL as approved. | 3 | Each | |
| 92 | 76 | S & F sheet metal DP enclosure with one MCB DP 16 Amp and metal clad plug and socket ( rating of MCB Suitable as per machine/Load capacity ) concelaled on wall complete all as specified \n Make : Indo Asian/ Legrand / L & T /Standard/Havell's/HPL as approved | 2 | Each | |
| 93 | 77 | M&L for sub main wiring with 4.0 run single core 4.0 Sqmm PVC unsheathed copper multistranded conductor, FRLS , drawing into and including PVC conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/Ivory colour PVC conduit including multi stranded copper earth conductor 4.0 sq mm , FRLS two run as earth continuty conductor complete all as specified and as directed.\nNote :- 4 Run of cable and two run of earth conductor cable and conduit shall be measured as one length. | 20 | RM | |
| 94 | 78 | M/L for sub main wiring with 2.0 run single core 4.0 Sqmm PVC unsheathed copper multistranded conductor, FRLS , drawing into and including PVC conduit concealed medium grade of size not less than 20 mm dia with all fittings and fixtures like L- bow, saddles etc of white/Ivory colour PVC conduit including multi stranded copper earth conductor 4.0 sq mm , FRLS one run as earth continuty conductor complete all as specified \nNote :- 2 Run of cable and one run of earth conductor cable and conduit shall be measured as one length. | 10 | RM | |
| 95 | 79 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core.complete all as specified \n (Make :- Polycab/Havells / Plaza as approved | 40 | RM | |
| 96 | 80 | Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr width and getting out in Hard / dense soil complete all as specified and as directed | 6 | Cum | |
| 97 | 81 | Returning filling in including spreading, leveling, watering and well ramming in layer not exceeding 25 cm thick complete all as specified and as directed | 3 | Cum | |
| 98 | 82 | Removal of surface soil to a distance n.exc 50 m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed | 3 | Cum | |
| 99 | 83 | M & L river sand for cushioning for cable protection in trenches 8 cm before laying cable and 15 cm deep after laying of cable complete all as specified and as directed \n( Note: Punned thickness shall only be measured for payment) | 2.5 | Cum | |
| 100 | 84 | M&L laying well burnt old size bricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. | 240 | Each | |
| 101 | 85 | M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20 mm dia with concealed modular metal box sutable for switches ,sockets , etc and with GI/ MS box, 2.0 mm thickness concealed with necessary top plate of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dully as specified for folowing all as specified and as directed . | 85 | ||
| 102 | 85.1 | One light point controlled by one switch | 2 | Each Point | |
| 103 | 85.2 | One exhaust fan point controlled by one switch | 2 | Each Point | |
| 104 | 85.3 | 5 Amp switch socket on the same board. | 1 | Each Point | |
| 105 | 85.4 | 5 Amp switch socket on independent board. | 2 | Each Point | |
| 106 | 86 | All as per item No 85 above but size of cable 2.5 sq mm for 15 Amps switch socket with earth wire of 2.5 sq mm and ditto | 2 | Each Point | |
| 107 | 87 | S&F switch 5 Amps piano type 230 Volts one way complete all as specified and as directed | 4 | Each | |
| 108 | 88 | S&F switch socket combination 5 Amps flush type 230 Volts one way acomplete all as specified and as directed \n | 2 | Each | |
| 109 | 89 | S&F switch socket combination 5/15 Amps flush type 230 Volts one way complete all as specified and as directed | 2 | Each | |
| 110 | 90 | S&F ceiling rose surface backlite 65 x 50 mm two to three terminal suitable for 230 Volts AC supply complete all as specified and as directed | 4 | Each | |
| 111 | 91 | S&F exhaust fan fan 230 Volt 50 Hz single phase AC supply ,300 mm sweep with louver complete with metal body powder coated with protective steel bird gaurd on wall including provision of 3 core 1.0 Sq mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor complete all as specified and as directed \nMake: Havells /Almonard /Bajaj. | 2 | Each | |
| 112 | 92 | Supply & fix LED tube light along with base frame ,18 W fixed on wall /Ceiling complete all as specified and as directed by Engineer in charge .\nMake: Havells/Wipro /Bajaj/Philips/HPL /Luker . | 2 | Each | |
| 113 | 93 | M & L Earthing complete with galvanized steel earth plate electrode 600x600x6.0mm thick buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less that 1.5 meters below normal ground level connected to galvanized iron strip 25 X 4 mm as earthing by means of bolts nuts and washers of galvanized iron including excavation and earth work and disposal of surplus soil including 40 mm GI tubing light grade and necessary fittings for protection of GI strip including layong of charcoal , dust and common slat , PCC 1:2: 4 type B 1 using 320 mm graded aggregate with earth pit with 40 X 40 X 6.0 mm MS angle iron frame RCC cover 40 mm thick (1:2: 4) type C1 using 20 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75 mm C/C both way with MS handle 20 mm dia plastering 15 mm thick CM ( 1: 6) internally and up to 150 mm below ground level externally . PGI funel with wire mesh 20 mm dia GI pipe for watering complete all as shown on electrical plate No : 03 of SSR part -I 2009 and connected to earth test point including testing complete all as specified and as directed | 2 | Each Set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
