Renovation Of Range Office Building At Pathanapuram In Pathanapuram Range During 2020-21
Tender Value
9 Lakhs
Estimated cost
Bid Submission
12 Oct 2020
0 days left
EMD
22500
Bank guarantee accepted
Document Fee
2150
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathanapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Range Office Building At Pathanapuram In Pathanapuram Range During 2020-21
BOQ
| Name of Work: ESTIMATE FOR THE COST OF RENOVATION OF RANGE OFFICE BUILDING AT PATHANAPURAM RANGE DURING 2020-21 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Coolies for cutting and dismantling the shade, wall for fixing door,basement portion breacking edges of slab, parapet ect and clearing the debrics etc asper direction | BI01010001010000000000000515BI0100001114 | 7 | nos |
| 2 | 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottom etc All kinds of soil | 9 | m3 | |
| 3 | 3 | Plain Cement concrete 1:4:8 using 40mm nominal size and hard granite broken stone below foundation including mixing, laying, compacting and curing etc. complete as directed by the Site Engineer including all labour charges, cost and conveyance of all materials | BI01010001010000000000000515BI0100001115 | 3.5 | m3 |
| 4 | 4 | RR Masonry for foundation and basement in cm 1:6 including cost and conveyance of all materials to site labour charges ,watering, curing etc complete | BI01010001010000000000000515BI0100001116 | 11 | m3 |
| 5 | 5 | Cement solid block masonry with cm 1:6 using best quality solid blocks of size 30x20x20 cm including cost and conveyance etc. complete above plinth level upto floor II level | BI01010001010000000000000515BI0100001117 | 12 | m3 |
| 6 | 6 | Supplying and fixing Anjily wood planned and framed work for frames of doors and windows including all charges | BI01010001010000000000000515BI0100001118 | 0.5 | m3 |
| 7 | 7 | Providing and fitting Flat iron hold fast in cc 1:3:6 embedding in CC blocks | BI01010001010000000000000515BI0100001119 | 22 | nos |
| 8 | 8 | Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. | BI01010001010000000000000515BI0100001120 | 125 | kg |
| 9 | 9 | Centring and shuttering including strutting, propping etc. and remova of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers. | BI01010001010000000000000515BI0100001121 | 10 | m2 |
| 10 | 10 | Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. | BI01010001010000000000000515BI0100001122 | 49 | m2 |
| 11 | 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3( graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001123 | 6.5 | m3 |
| 12 | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level.T.M.T bars. | 490 | kg | |
| 13 | 13 | Plastering with CM 1:3, 12 mm thick two coat floated hard and travelled smooth including all charges for top of roof slab | 49 | m2 | |
| 14 | 14 | Plastering with CM 1:3, 6mm thick one coat floated hard and travelled smooth including all charges to the cealing | 48 | m2 | |
| 15 | 15 | Plastering with cement mortar 1:4, 12mm thick one coat floated hard and trowelled smooth to masonry walls including cost and conveyance of all materials, labour charges, hire charges for scaffolding, watering, curing etc. complete | 137 | m2 | |
| 16 | 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 12 | m2 | |
| 17 | 17 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Rey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | 7 | m2 | |
| 18 | 18 | Providing and laying vitrified floor tiles in different sizes600x600mm (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. | 41 | m2 | |
| 19 | 19 | Providing and fixing coloured vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level colour P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : | 1 | no | |
| 20 | 20 | Supplying and fitting White glazed earthenwere wash basine of size550x440mm including 1 CP pillar tap, PVC connection , angle cock,32MM brass waist coupling, bottle trap etc | 1 | no | |
| 21 | 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, 30mm thick shutters including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin- charge. using jack wood) | 3.6 | m2 | |
| 22 | 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening forglazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick using good quality jackwod | 2.5 | m2 | |
| 23 | 23 | Supplying and fixing jackwood wood fully glazed shutters as per standard drawings to suit the window & ventilator frame of size 90x35mm including Cost and conveyance of all materials, Labour charges, cost of fittings such as hinges, hooks and eyes etc. complete. | 9.1 | m2 | |
| 24 | 24 | Supplying and fitting UPVC door frame extuded section profile size 42x50mm | 4.8 | m | |
| 25 | 25 | Supplying and ftting to the existing door frame 24mm thick factory made PVC Door shutter | 1.4 | m2 | |
| 26 | 26 | Supplying and fitting bright finished brass 100 mm mortise lock | 4 | nos | |
| 27 | 27 | Supplying and fiuxing healthfaucet best quality including angle cock etc | 1 | no | |
| 28 | 28 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. | 2 | nos | |
| 29 | 29 | Supplying and fixing 110mm/4kg PVC pipe and specials with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | 20 | mtr | |
| 30 | 30 | Supplying and fixing 75mm dia PVC pipes and specials | 4 | mtr | |
| 31 | 31 | Supplying and fixing 75mm PVC Vent cowl | 1 | no | |
| 32 | 32 | Supplying and fixing 40mm PVC (12kgf/cm2)pipe and specials including cutting and making good the wall floors etc.complete. | 20 | m | |
| 33 | 33 | Supplying and fixing 25mmC PVC (12kgf/cm2)pipe including cutting and making good the wall floors etc.complete. | 20 | m | |
| 34 | 34 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm | 1 | no | |
| 35 | 35 | Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge | 1 | no | |
| 36 | 36 | White washing with plastic emolsion paint white two coats to the under dide of slabs including cost and conveyance of all materials to site, labour charges, hire charges for scaffolding, curing etc. complete. | 48 | m2 | |
| 37 | 37 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm | 287 | m2 | |
| 38 | 38 | Painting with synthetic enamel paint 2 coats of approved brand and shade over a coat of priming coat after rubbing with sand paper and cleaning the surface of new wood work and iron materials.etc | 33 | m2 | |
| 39 | 39 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and painting with synthgetic enamal paint after applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | 452 | kg | |
| 40 | 40 | Fixing the GI Post in c.c foundation 0f size 0.3x0.3x0.45 cm for fxing the pipe over slab etc | 14 | nos | |
| 41 | 41 | od 340/2020-2021 null Providing and fixing roof using powder coated composition of alu;zinc rooffiing sheet(dura shine)of 0.35mm thick or nearest available thickness with overlap at 150mm at each ends fixingin position with polymer coated J or L hooks, bolts and nuts 8 mm diameter plane washers with self end EPDM washers including all cost of cutting sheets to size and shape etc | 57 | m2 | |
| 42 | 42 | od 340/2020-2021 null Providing ridges or hip or ridgecoping withtile profile sheet of powder coated alu Zinc(dura shine)of 0.35mm thick or nearest available size including crank bolts and nuts, washers or with self drilling screws with EPDM washers including all cost of cutting sheets to size and shape etc (500-600mm) | 21 | m | |
| 43 | 43 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer -in -charge | 2 | m2 | |
| 44 | 44 | Water supply arrangements | 1 | LS | |
| 45 | 45 | Electrification works | 1 | LS | |
| 46 | 46 | GST 12 % | 1 | LS |
AI Tender Summary
Tender Timeline
Sep 30, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 16, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender