Ncrmp-Ii Construction Of Multipurpose Cyclone Shelter At Kumarapuram , Alappuzha , Kerala Civil And Electrical Works
Tender Value
3.25 Crore
Estimated cost
Bid Submission
28 Oct 2020
0 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
8300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GLPS Karuvatta, Kumarapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Ncrmp-Ii Construction Of Multipurpose Cyclone Shelter At Kumarapuram , Alappuzha , Kerala Civil And Electrical Works
BOQ
| Work Name : Construction of Multipurpose Cyclone Shelter at Kumarapuram - Alappuzha Dist. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Building Proper | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | 2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001114 | 800 | sqm |
| 3 | 1.02 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001115 | 751.25 | cum |
| 4 | 1.03 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | BI01010001010000000000000515BI0100001116 | 261.685 | cum |
| 5 | 1.04 | 2.16.2 : Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements to be taken of the face area timbered).Depth exceeding 1.5 m but not exceeding 3 m | BI01010001010000000000000515BI0100001117 | 553.483 | sqm |
| 6 | 1.05 | 50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete | BI01010001010000000000000515BI0100001118 | 30 | hour |
| 7 | 1.06 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001119 | 50.543 | cum |
| 8 | 1.07 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001120 | 290.402 | sqm |
| 9 | 1.08 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers | BI01010001010000000000000515BI0100001121 | 1048.78 | sqm |
| 10 | 1.09 | 5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts | BI01010001010000000000000515BI0100001122 | 559.97 | sqm |
| 11 | 1.1 | 5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases) | BI01010001010000000000000515BI0100001123 | 111.24 | sqm |
| 12 | 1.11 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001124 | 919.079 | sqm |
| 13 | 1.12 | 5.9.4 : Centering and shuttering including strutting, etc. and removal of form for:Shelves (Cast in situ) | BI01010001010000000000000515BI0100001125 | 45.22 | sqm |
| 14 | 1.13 | 5.9.16.1 : Edges of slabs and breaks in floors and wallsUnder 20 cm wide | BI01010001010000000000000515BI0100001126 | 715.625 | metre |
| 15 | 1.14 | 5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges | BI01010001010000000000000515BI0100001127 | 117.576 | sqm |
| 16 | 1.15 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001128 | 34.4 | sqm |
| 17 | 1.16 | od57290/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Detailed mix design to be supplemented. Minimum cement content to be adopted is 340kg/cum. Excess/ less cement as per design mix is not payable separately. All work upto plinth level | BI01010001010000000000000515BI0100001129 | 261.099 | cum |
| 18 | 1.17 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001130 | 48303.3 | kilogram |
| 19 | 1.18 | 2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. | BI01010001010000000000000515BI0100001131 | 126.285 | cum |
| 20 | 1.19 | od57296/2018_2019 : Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Detailed mix design to be supplemented. Note:- Minimum cement content to be adopted is 340kg/cum. Excess/ less cement as per design mix is not payable separately.All work above plinth level upto floor V level | BI01010001010000000000000515BI0100001132 | 324.955 | cum |
| 21 | 1.2 | od57297/2018_2019 : (Reference code:5.22.6) Corrosion Resistant Steel Reinforcement for R.C.C work (CRSD 500 or above) including straightening, cutting, bending, placing in position and binding all complete at all levels. | BI01010001010000000000000515BI0100001133 | 55242.3 | kilogram |
| 22 | 1.21 | 50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001134 | 197.809 | cum |
| 23 | 1.22 | 50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete | BI01010001010000000000000515BI0100001135 | 14.603 | cum |
| 24 | 1.23 | 6.3.2 : Brick work with common burnt clay machine moulded perforated bricks of classdesignation 12.5 conforming to IS: 2222 in superstructure above plinth level up tofloor five level in cement mortar 1:6 (1 cement : 6 coarse sand):With Modular bricks | BI01010001010000000000000515BI0100001136 | 15.688 | cum |
| 25 | 1.24 | 50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood | BI01010001010000000000000515BI0100001137 | 3.227 | cum |
| 26 | 1.25 | 50.9.3.1 : Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f Engineer in- charge. using Anjili/ Jack wood | BI01010001010000000000000515BI0100001138 | 54.113 | sqm |
| 27 | 1.26 | 50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters | BI01010001010000000000000515BI0100001139 | 49.285 | sqm |
| 28 | 1.27 | od57299/2018_2019 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved epoxy primer all complete.<br>Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001140 | 3753.46 | kg |
| 29 | 1.28 | 9.70.1 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:125x64x1.90 mm | BI01010001010000000000000515BI0100001141 | 108 | no |
| 30 | 1.29 | 9.70.3 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:75x47x1.80 mm | BI01010001010000000000000515BI0100001142 | 297 | no |
| 31 | 1.3 | 9.76 : Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | BI01010001010000000000000515BI0100001143 | 27 | no |
| 32 | 1.31 | 9.81.1 : Providing and fixing bright finished brass handles with screws etc. complete:125 mm | BI01010001010000000000000515BI0100001144 | 27 | no |
| 33 | 1.32 | 9.82 : Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | BI01010001010000000000000515BI0100001145 | 27 | no |
| 34 | 1.33 | 50.9.15.2 : Supplying and fixing 300 mm Aluminium aldrop | BI01010001010000000000000515BI0100001146 | 54 | no |
| 35 | 1.34 | 50.9.15.3 : Providing and fixing iron hooks and eyes : 200mm. | BI01010001010000000000000515BI0100001147 | 104 | no |
| 36 | 1.35 | 50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm | BI01010001010000000000000515BI0100001148 | 208 | no |
| 37 | 1.36 | od57300/2018_2019 : (Reference code:10.16.1) Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved epoxyl primer, including welding and bolted with special shaped washers etc. complete.<br>Hot finished welded type tubes | BI01010001010000000000000515BI0100001149 | 80 | kg |
| 38 | 1.37 | od57301/2018_2019 : (Reference code:50.10.2) Steel work for purlin/single section with MS pipes including cutting, hoisting, fixing in position and applying a priming coat of approved epoxy primer, including welding and bolted with special shaped washers etc. complete | BI01010001010000000000000515BI0100001150 | 80 | kg |
| 39 | 1.38 | 50.12.2.5 : Providing & fixing Poly carbonate multi wall plain sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheets shall be fixed using self drilling/ self tapping screw of size ( 5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical / curved surface, but excluding the cost of purlins, rafters, trusses, and including cutting to size and shapes where ever required. | BI01010001010000000000000515BI0100001151 | 8 | sqm |
| 40 | 1.39 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001152 | 715.725 | kg |
| 41 | 1.4 | 10.7 : Providing and fixing ball bearing for rolling shutters.Providing and fixing ball bearing for rolling shutters. | BI01010001010000000000000515BI0100001153 | 10 | no |
| 42 | 1.41 | 22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001154 | 49.5 | sqm |
| 43 | 1.42 | 9.117.2 : Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1 mm), with wall thickness 2.0mm (±0.2 mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 x 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer's specification and direction of Engineer-in-chargeExtruded section profile size 42x50 mm | BI01010001010000000000000515BI0100001155 | 68.4 | metre |
| 44 | 1.43 | 9.118.1 : Providing and fixing to existing door frames24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness,fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge( For W.C. and bathroom door shutter). | BI01010001010000000000000515BI0100001156 | 18.903 | sqm |
| 45 | 1.44 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001157 | 3883.27 | sqm |
| 46 | 1.45 | 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001158 | 430.461 | sqm |
| 47 | 1.46 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001159 | 1085.44 | sqm |
| 48 | 1.47 | 13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | BI01010001010000000000000515BI0100001160 | 2807.24 | sqm |
| 49 | 1.48 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm | BI01010001010000000000000515BI0100001161 | 4968.71 | sqm |
| 50 | 1.49 | 13.50.1 : Applying priming coat:With ready mixed pink or Grey primer of approved and manufacture on wood work (hard and soft wood) | BI01010001010000000000000515BI0100001162 | 295.325 | sqm |
| 51 | 1.5 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001163 | 295.325 | sqm |
| 52 | 1.51 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001164 | 835.569 | sqm |
| 53 | 1.52 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001165 | 183.341 | sqm |
| 54 | 1.53 | 11.26.1 : Kota stone slab flooring over 20 mm ( average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)25 mm thick | BI01010001010000000000000515BI0100001166 | 250 | sqm |
| 55 | 1.54 | 8.2.2.1 : Granite of any colour and shadeArea of slab upto 0.50 sqm | BI01010001010000000000000515BI0100001167 | 7.38 | sqm |
| 56 | 1.55 | 8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work | BI01010001010000000000000515BI0100001168 | 45.22 | metre |
| 57 | 2 | APPENDIX-B CONSTRUCTION OF COMPOUND WALL | BI01010001010000000000000515BI0100001169 | ||
| 58 | 2.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001170 | 31.626 | cum |
| 59 | 2.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001171 | 5.75 | cum |
| 60 | 2.03 | 4.1.6 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) | BI01010001010000000000000515BI0100001172 | 12.075 | cum |
| 61 | 2.04 | 4.3.1 : Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | BI01010001010000000000000515BI0100001173 | 103.5 | sqm |
| 62 | 2.05 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001174 | 34.938 | cum |
| 63 | 2.06 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001175 | 3.45 | cum |
| 64 | 2.07 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001176 | 345 | kilogram |
| 65 | 2.08 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001177 | 448.53 | sqm |
| 66 | 2.09 | od57293/2018_2019 : (Reference code:10.25.2) Item Shifted to Sub head 14 as item 14.73<br>Item Shifted to head 14 as item 14.74<br>Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved epoxy primer using structural steel etc. as required.<br>In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | BI01010001010000000000000515BI0100001178 | 280.502 | kg |
| 67 | 2.1 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001179 | 448.53 | sqm |
| 68 | 3 | Appendix C- Rain water harvesting tank and open well | BI01010001010000000000000515BI0100001180 | ||
| 69 | 3.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001181 | 30.571 | cum |
| 70 | 3.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001182 | 2.4 | cum |
| 71 | 3.03 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001183 | 12.77 | cum |
| 72 | 3.04 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001184 | 138.471 | sqm |
| 73 | 3.05 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001185 | 16.12 | sqm |
| 74 | 3.06 | 5.9.16.1 : Edges of slabs and breaks in floors and wallsUnder 20 cm wide | BI01010001010000000000000515BI0100001186 | 44.2 | metre |
| 75 | 3.07 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001187 | 1915.5 | kilogram |
| 76 | 3.08 | 50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | BI01010001010000000000000515BI0100001188 | 50 | metre |
| 77 | 3.09 | 50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001189 | 5 | no |
| 78 | 3.1 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001190 | 8 | no |
| 79 | 3.11 | 50.18.9.22.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x75 mm dia Door Tee | BI01010001010000000000000515BI0100001191 | 8 | no |
| 80 | 3.12 | 23.5 : Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- chargesSupplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer -in- charges | BI01010001010000000000000515BI0100001192 | 1.36 | cum |
| 81 | 3.13 | 23.6 : Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-ChargeSupplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit,over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer -in-Charge | BI01010001010000000000000515BI0100001193 | 0.45 | cum |
| 82 | 3.14 | 23.7 : Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001194 | 0.45 | cum |
| 83 | 4 | Water supply and sanitary works | BI01010001010000000000000515BI0100001195 | ||
| 84 | 4.01 | 17.2.1 : Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid | BI01010001010000000000000515BI0100001196 | 8 | each |
| 85 | 4.02 | 17.1.1 : Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | BI01010001010000000000000515BI0100001197 | 6 | each |
| 86 | 4.03 | 11.38 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. | BI01010001010000000000000515BI0100001198 | 13.5 | sqm |
| 87 | 4.04 | 17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps | BI01010001010000000000000515BI0100001199 | 16 | each |
| 88 | 4.05 | 17.78 : Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete.Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre /8 litres), including seat cover, and cistern fittings, nuts bolts and gasket etc complete. | BI01010001010000000000000515BI0100001200 | 2 | each |
| 89 | 4.06 | 17.4.1 : Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:One urinal basin with 5 litre white P.V.C. automatic flushing cistern | BI01010001010000000000000515BI0100001201 | 8 | each |
| 90 | 4.07 | 17.7.2 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap | BI01010001010000000000000515BI0100001202 | 2 | each |
| 91 | 4.08 | 17.32.3 : Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Oval shape 450x350 mm (outer dimensions) | BI01010001010000000000000515BI0100001203 | 18 | each |
| 92 | 4.09 | 50.17.1.2 : Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001204 | 20 | no |
| 93 | 4.1 | 18.65 : Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms.Providing and fixing PTMT Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements, weighing not less than 106 gms. | BI01010001010000000000000515BI0100001205 | 20 | each |
| 94 | 4.11 | od57294/2018_2019 : Providing and fixing 1m long stainless steel horizontal and vertical grab rails 50mm dia etc., ifixed on wall with SS screws for physically challenged toilet | BI01010001010000000000000515BI0100001206 | 4 | each |
| 95 | 4.12 | od57295/2018_2019 : Providing and fixing 1.20m long stainless steel hinged support rail 50mm dia. fixed on wall with SS screws near the water closet for physically challenged toilet | BI01010001010000000000000515BI0100001207 | 2 | each |
| 96 | 4.13 | 17.10.1.4 : Kitchen sink with drain board510x1040 mm bowl depth 178 mm | BI01010001010000000000000515BI0100001208 | 1 | each |
| 97 | 4.14 | 18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001209 | 25 | metre |
| 98 | 4.15 | 50.18.8.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 10 kgf/cm2 | BI01010001010000000000000515BI0100001210 | 30 | metre |
| 99 | 4.16 | 50.18.8.8.2 : Providing and fixing PVC pipes, fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per the direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 4 kgf/cm2 | BI01010001010000000000000515BI0100001211 | 31 | metre |
| 100 | 4.17 | 18.9.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work40 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001212 | 64 | metre |
| 101 | 4.18 | 18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001213 | 82 | metre |
| 102 | 4.19 | 18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001214 | 48 | metre |
| 103 | 4.2 | 18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore | BI01010001010000000000000515BI0100001215 | 39 | each |
| 104 | 4.21 | 18.16.2 : Providing and fixing brass stop cock of approved quality :20 mm nominal bore | BI01010001010000000000000515BI0100001216 | 14 | each |
| 105 | 4.22 | 50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | BI01010001010000000000000515BI0100001217 | 16 | no |
| 106 | 4.23 | 18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore | BI01010001010000000000000515BI0100001218 | 31 | each |
| 107 | 4.24 | 18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore | BI01010001010000000000000515BI0100001219 | 2 | each |
| 108 | 4.25 | 18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore | BI01010001010000000000000515BI0100001220 | 3 | each |
| 109 | 4.26 | 18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore | BI01010001010000000000000515BI0100001221 | 13 | no |
| 110 | 4.27 | 50.18.9.9.2 : Providing and fixing PVC pipes includes joints of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in CHarge. 110 mm dia 4 Kg/cm2 | BI01010001010000000000000515BI0100001222 | 35 | metre |
| 111 | 4.28 | 50.18.8.9.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC Solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 | BI01010001010000000000000515BI0100001223 | 10 | metre |
| 112 | 4.29 | 50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001224 | 40 | metre |
| 113 | 4.3 | 50.18.9.22.1 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow | BI01010001010000000000000515BI0100001225 | 10 | no |
| 114 | 4.31 | 50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend | BI01010001010000000000000515BI0100001226 | 12 | no |
| 115 | 4.32 | 50.18.9.22.8 : Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl | BI01010001010000000000000515BI0100001227 | 20 | no |
| 116 | 4.33 | 50.18.9.21.3 : Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75 mm dia Door Elbow | BI01010001010000000000000515BI0100001228 | 10 | no |
| 117 | 4.34 | 50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend | BI01010001010000000000000515BI0100001229 | 12 | no |
| 118 | 4.35 | 50.18.9.21.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee | BI01010001010000000000000515BI0100001230 | 15 | no |
| 119 | 4.36 | 50.18.9.21.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75x75x75 mm dia Door Tee | BI01010001010000000000000515BI0100001231 | 12 | no |
| 120 | 4.37 | 50.18.9.22.3 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement-110 mm dia Door Elbow | BI01010001010000000000000515BI0100001232 | 15 | no |
| 121 | 4.38 | 50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | BI01010001010000000000000515BI0100001233 | 12 | no |
| 122 | 4.39 | 50.18.9.22.6 : Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee | BI01010001010000000000000515BI0100001234 | 10 | no |
| 123 | 4.4 | 18.36.1 : Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 grades stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 | BI01010001010000000000000515BI0100001235 | 10 | each |
| 124 | 5 | GREASE CUM TRASH TRAP | BI01010001010000000000000515BI0100001236 | ||
| 125 | 5.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001237 | 2.6 | cum |
| 126 | 5.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001238 | 0.3 | cum |
| 127 | 5.03 | 6.2.2 : Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement Mortar 1:6 (1 cement : 6 coarse sand) | BI01010001010000000000000515BI0100001239 | 1.4 | cum |
| 128 | 5.04 | 4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001240 | 0.15 | cum |
| 129 | 5.05 | 50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete | BI01010001010000000000000515BI0100001241 | 9 | sqm |
| 130 | 5.06 | 19.18.1 : Supplying and fixing C.I with out frame for manholes:455 x 610 mm rectangular C.I cover ( light duty ) the weight of the cover to be no less than 23 kg | BI01010001010000000000000515BI0100001242 | 2 | each |
| 131 | 5.07 | 50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | BI01010001010000000000000515BI0100001243 | 2 | no |
| 132 | 6 | Roof water disposal | BI01010001010000000000000515BI0100001244 | ||
| 133 | 6.01 | 50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001245 | 52 | metre |
| 134 | 6.02 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001246 | 0.48 | cum |
| 135 | 6.03 | 6.2.1 : Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | BI01010001010000000000000515BI0100001247 | 0.84 | cum |
| 136 | 6.04 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001248 | 5.6 | sqm |
| 137 | 7 | waste water treatment and disposal systemI | BI01010001010000000000000515BI0100001249 | ||
| 138 | 7.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001250 | 11.787 | cum |
| 139 | 7.02 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | BI01010001010000000000000515BI0100001251 | 1.966 | cum |
| 140 | 7.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001252 | 0.787 | cum |
| 141 | 7.04 | od57291/2018_2019 : ) Providing and laying in position machine batched and machine mixed design mix M-30grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 340 kg/ cum. Excess or less cement used as per design mix isnot payable or recoverable separately.<br>All work upto plinth level | BI01010001010000000000000515BI0100001253 | 3.497 | cum |
| 142 | 7.05 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001254 | 0.353 | cum |
| 143 | 7.06 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001255 | 20.125 | sqm |
| 144 | 7.07 | 50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2 | BI01010001010000000000000515BI0100001256 | 2.5 | metre |
| 145 | 7.08 | 50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | BI01010001010000000000000515BI0100001257 | 3 | metre |
| 146 | 7.09 | 50.18.9.21.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend | BI01010001010000000000000515BI0100001258 | 1 | no |
| 147 | 7.1 | 50.18.9.21.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement -75x75x75 mm dia Tee | BI01010001010000000000000515BI0100001259 | 1 | no |
| 148 | 7.11 | 50.18.9.18.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall | BI01010001010000000000000515BI0100001260 | 6 | metre |
| 149 | 7.12 | 50.18.9.21.7 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Vent cowl | BI01010001010000000000000515BI0100001261 | 1 | no |
| 150 | 7.13 | 50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | BI01010001010000000000000515BI0100001262 | 2 | no |
| 151 | 7.14 | 19.18.2 : Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kg | BI01010001010000000000000515BI0100001263 | 4 | each |
| 152 | 7.15 | 50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001264 | 12 | metre |
| 153 | 7.16 | 4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001265 | 1.8 | cum |
| 154 | 7.17 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001266 | 45 | sqm |
| 155 | 7.18 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001267 | 10 | sqm |
| 156 | 7.19 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001268 | 9 | sqm |
| 157 | 7.2 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001269 | 800 | kilogram |
| 158 | 7.21 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001270 | 6 | kg |
| 159 | 8 | upflow anaerobic filter | BI01010001010000000000000515BI0100001271 | ||
| 160 | 8.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001272 | 20.25 | cum |
| 161 | 8.02 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil | BI01010001010000000000000515BI0100001273 | 15.93 | cum |
| 162 | 8.03 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001274 | 1.405 | cum |
| 163 | 8.04 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001275 | 5.46 | cum |
| 164 | 8.05 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15<sup>0</sup> landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001276 | 1.464 | cum |
| 165 | 8.06 | 50.18.7.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall | BI01010001010000000000000515BI0100001277 | 36 | metre |
| 166 | 8.07 | 50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2 | BI01010001010000000000000515BI0100001278 | 2 | metre |
| 167 | 8.08 | 50.18.9.22.5 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee | BI01010001010000000000000515BI0100001279 | 1 | no |
| 168 | 8.09 | 19.18.2 : Supplying and fixing C.I with out frame for manholes:500 mm diameter C.I. (medium duty) the weight of the cover to be not less than 58 kg | BI01010001010000000000000515BI0100001280 | 3 | each |
| 169 | 8.1 | 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001281 | 42.232 | sqm |
| 170 | 8.11 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001282 | 2.43 | sqm |
| 171 | 8.12 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. | BI01010001010000000000000515BI0100001283 | 74.363 | sqm |
| 172 | 8.13 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001284 | 13.5 | sqm |
| 173 | 8.14 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001285 | 600 | kilogram |
| 174 | 9 | waste water treatment and disposal systemII | BI01010001010000000000000515BI0100001286 | ||
| 175 | 9.01 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001287 | 8.96 | cum |
| 176 | 9.02 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size | BI01010001010000000000000515BI0100001288 | 1.319 | cum |
| 177 | 9.03 | 5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001289 | 0.605 | cum |
| 178 | 9.04 | 13.7.1 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand) | BI01010001010000000000000515BI0100001290 | 32.97 | sqm |
| 179 | 9.05 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001291 | 22 | kg |
| 180 | 10 | pump set and pumping main | BI01010001010000000000000515BI0100001292 | ||
| 181 | 10.01 | od57289/2018_2019 : Providing and fixing 1HP Motor with pumpset, erection of open well submersible pupset capable of lifting 120lpmof water against a total head of 20m with accessories such as non return valve, full way wheel valve, ICTP switch, voltmeter and ammeter, panel board. contractor to get approval of Engineer in charge on the selection of pump satisfying the design parameters. Capacity of pump may vary with different suppliers according to their manufacturing standard and no claim is accepted in later stage . if suppliers can provide only higher capacity pumps satisfying the design criteria | BI01010001010000000000000515BI0100001293 | 2 | each |
| 182 | 10.02 | 23.1.1.1 : All types of soil300 mm dia | BI01010001010000000000000515BI0100001294 | 100 | metre |
| 183 | 10.03 | 23.3.3 : Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia | BI01010001010000000000000515BI0100001295 | 100 | metre |
| 184 | 10.04 | 18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes | BI01010001010000000000000515BI0100001296 | 50 | metre |
| 185 | 11 | Miscellaeous work | BI01010001010000000000000515BI0100001297 | ||
| 186 | 11.01 | 2.34.1 : Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos / Lindane emulsifiable concentrate of 20% | BI01010001010000000000000515BI0100001298 | 580.883 | Litre |
| 187 | 11.02 | 2.35.2.1 : Along the external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre including drilling and plugging holes etc:With Chlorpyriphosl Lindane E.C.20% with 1% concentration | BI01010001010000000000000515BI0100001299 | 91.3 | metre |
| 188 | 11.03 | 2.35.3.1 : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% with 1% concentration | BI01010001010000000000000515BI0100001300 | 375.458 | sqm |
| 189 | 11.04 | od58913/2018_2019 : Providing 8' (2.44m) high corrugated G. I. Sheet (min. thickness 0.63mm) barricading fixed with G. I. hooks and nuts on frame made of M.S angles of minimum size 40*40*6, fixed to the vertical M.S. Channel posts with spacing not less than 3.00 meters. (average). Barricading shall be painted with signs and messages to warn people about keeping away from the construction zone. The following shall be ensured while installation: • The safety barricading should be high enough so that people (especially children) cannot climb over it. • It should be installed in a manner so that one cannot crawl underneath it. • The safety barricading should be strong enough and durable enough to withstand the elements, including high wind conditions. • Should be sturdy enough to bear normal wear and tear at the construction site and should not topple off and hurt someone. Rate shall be inclusive of cost of providing all material and fixing arrangements, including excavation, concrete and backfilling etc., removal of the complete barricading after construction work is over and rehabilitation of the site. Material of barricading shall be the property of contractor after completion the work. Barricading shall be maintained throughout the construction period.<br> | BI01010001010000000000000515BI0100001301 | 450 | sqm |
| 190 | 12 | ELECTRIFICATION | BI01010001010000000000000515BI0100001302 | ||
| 191 | 12.01 | 90.2.1.1 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point | BI01010001010000000000000515BI0100001303 | 101 | point |
| 192 | 12.02 | 90.2.1.3 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point | BI01010001010000000000000515BI0100001304 | 22 | point |
| 193 | 12.03 | 90.2.1.4 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point | BI01010001010000000000000515BI0100001305 | 33 | point |
| 194 | 12.04 | 90.2.1.6 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points | BI01010001010000000000000515BI0100001306 | 18 | each |
| 195 | 12.05 | 90.2.1.7 : Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point | BI01010001010000000000000515BI0100001307 | 22 | each |
| 196 | 12.06 | 90.3.20.3 : Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture | BI01010001010000000000000515BI0100001308 | 14 | each |
| 197 | 12.07 | 90.3.21.3 : Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture | BI01010001010000000000000515BI0100001309 | 21 | each |
| 198 | 12.08 | 90.3.24.3 : Supply & installation of light fittings suspended on ball & socket arrangement with 19 mm down rod Supply, conveyance, installation, testing and commissioning the light fittings of following types made of .5mm thick CRCA sheet accessories and lamps etc. including supplying and fixing ball and socket arrangements on PVC round block, suspension down rod of 19mm dia MS conduit up to 2x30cm length including painting and wiring the down rod with 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connections etc. a required.1200 mm 1X20W LED Lamp with box type fixture | BI01010001010000000000000515BI0100001310 | 50 | each |
| 199 | 12.09 | od158815/2018_2019 : Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200 mm polished aluminium shade and Dwarf size 5 W LED Bulb and giving connection etc as required | BI01010001010000000000000515BI0100001311 | 22 | each |
| 200 | 12.1 | 90.4.5.2 : Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200mm sweep -5star rated ceiling fan complete with 300mm down rod , canopies, shackeles and blades and resistance type regulator working on 230V/240V single phase A/C | BI01010001010000000000000515BI0100001312 | 33 | each |
| 201 | 12.11 | 90.4.1 : Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. | BI01010001010000000000000515BI0100001313 | 33 | each |
| 202 | 12.12 | od157300/2018_2019 : Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans 300/ 305 mm, single phase light duty exhaust fan in metal frame in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS (Almonard/equivalent). | BI01010001010000000000000515BI0100001314 | 8 | each |
| 203 | 12.13 | od157301/2018_2019 : Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required. | BI01010001010000000000000515BI0100001315 | 8 | each |
| 204 | 12.14 | od157302/2018_2019 : Supply and providing every additional length of down rod of suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming in relevant ISS or with original wiring extended including painting as required. | BI01010001010000000000000515BI0100001316 | 17 | per metre |
| 205 | 12.15 | od157304/2018_2019 : Supply and fixing smart bright street light fitting IP65 luminaries Philips make Type HSN BRP042 LED19CWMRS1PSU GR . | BI01010001010000000000000515BI0100001317 | 8 | each |
| 206 | 12.16 | 90.3.18.2 : Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps | BI01010001010000000000000515BI0100001318 | 8 | metre |
| 207 | 12.17 | 90.3.10 : Supplying and providing extra H.G conduit down rod of 19 mm dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor flex wire conforming to relevant ISS or with the extended original wiring and giving connection etc. as required. | BI01010001010000000000000515BI0100001319 | 21 | each |
| 208 | 12.18 | od157308/2018_2019 : Supply and fixing 20 mm dia light PVC conduit with accessories in surface of wall making good the damages etc as required. | BI01010001010000000000000515BI0100001320 | 210 | metre |
| 209 | 12.19 | od157309/2018_2019 : Supply and fixing 25 mm dia light PVC conduit with accessories in surface of wall making good the damages etc as required. | BI01010001010000000000000515BI0100001321 | 170 | metre |
| 210 | 12.2 | 1.17.2 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm | BI01010001010000000000000515BI0100001322 | 70 | metre |
| 211 | 12.21 | 1.17.4 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm | BI01010001010000000000000515BI0100001323 | 24 | metre |
| 212 | 12.22 | 1.17.11 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm | BI01010001010000000000000515BI0100001324 | 76 | metre |
| 213 | 12.23 | 1.17.13 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm | BI01010001010000000000000515BI0100001325 | 34 | metre |
| 214 | 12.24 | 1.17.15 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm | BI01010001010000000000000515BI0100001326 | 28 | metre |
| 215 | 12.25 | 1.17.22 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm | BI01010001010000000000000515BI0100001327 | 60 | metre |
| 216 | 12.26 | 1.17.31 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm | BI01010001010000000000000515BI0100001328 | 54 | metre |
| 217 | 12.27 | 90.6.4.54 : Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.10.00 sq.mm 4 Run | BI01010001010000000000000515BI0100001329 | 30 | metre |
| 218 | 12.28 | 90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp | BI01010001010000000000000515BI0100001330 | 25 | metre |
| 219 | 12.29 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) | BI01010001010000000000000515BI0100001331 | 2 | set |
| 220 | 12.3 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) | BI01010001010000000000000515BI0100001332 | 7 | each |
| 221 | 12.31 | 1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). | BI01010001010000000000000515BI0100001333 | 9 | each |
| 222 | 12.32 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch | BI01010001010000000000000515BI0100001334 | 7 | each |
| 223 | 12.33 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet | BI01010001010000000000000515BI0100001335 | 7 | each |
| 224 | 12.34 | od157310/2018_2019 : Supplying and fixing 4P sheet steel enclosure on surface/ recess testing and commissioning etc. as required. | BI01010001010000000000000515BI0100001336 | 1 | each |
| 225 | 12.35 | 90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) | BI01010001010000000000000515BI0100001337 | 6 | each |
| 226 | 12.36 | 90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) | BI01010001010000000000000515BI0100001338 | 3 | each |
| 227 | 12.37 | 90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43) | BI01010001010000000000000515BI0100001339 | 1 | each |
| 228 | 12.38 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole | BI01010001010000000000000515BI0100001340 | 72 | each |
| 229 | 12.39 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole | BI01010001010000000000000515BI0100001341 | 12 | each |
| 230 | 12.4 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps | BI01010001010000000000000515BI0100001342 | 10 | each |
| 231 | 12.41 | 2.15.1 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps | BI01010001010000000000000515BI0100001343 | 6 | each |
| 232 | 12.42 | 90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.16 A-100A, 16 kA (Ics=100%Icu), 4 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL | BI01010001010000000000000515BI0100001344 | 1 | no |
| 233 | 12.43 | od157311/2018_2019 : Supply and drawing 2.65mm dia bare copper conductor through existing conduit / along with wiring as required | BI01010001010000000000000515BI0100001345 | 220 | per metre |
| 234 | 12.44 | od157312/2018_2019 : Supply and drawing 2.00mm dia bare copper conductor through existing conduit / along with wiring as required | BI01010001010000000000000515BI0100001346 | 170 | per metre |
| 235 | 12.45 | od157313/2018_2019 : Supply and drawing 3.15mm dia bare copper conductor through existing conduit / along with wiring as required | BI01010001010000000000000515BI0100001347 | 90 | metre |
| 236 | 12.46 | od157314/2018_2019 : supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required 3.15 mm (10 SWG) | BI01010001010000000000000515BI0100001348 | 16 | each |
| 237 | 12.47 | od157315/2018_2019 : supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required 2.65 mm (12 SWG) | BI01010001010000000000000515BI0100001349 | 40 | each |
| 238 | 12.48 | od157316/2018_2019 : supply of superior quality copper earth socket for the 2.00mm(14 SWG) sizes of earth conductor including crimping etc. as required. | BI01010001010000000000000515BI0100001350 | 30 | each |
| 239 | 12.49 | od157317/2018_2019 : Supply and laying bare earthing conductors of the 3.15 mm copper conductor (10 SWG) laid 0.6 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil). | BI01010001010000000000000515BI0100001351 | 40 | metre |
| 240 | 12.5 | 5.4 : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | BI01010001010000000000000515BI0100001352 | 3 | set |
| 241 | 12.51 | od157318/2018_2019 : Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 12 x 3 mm, 25 x 3 mm brass bolt & nut | BI01010001010000000000000515BI0100001353 | 42 | each |
| 242 | 12.52 | od157319/2018_2019 : Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO) 32 A, 415 V, 50 Hz, AC 23 A duty, TP/ TPN switch disconnector unit | BI01010001010000000000000515BI0100001354 | 1 | each |
| 243 | 12.53 | od157320/2018_2019 : Supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of the following ratings on existing angle iron frame work or directly to wall using necessary bolts & nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required. (excluding cost of HRC fuse links in case of SDF/ SDFCO) 63 A, 415 V, 50 Hz, AC 23 A duty, 4 pole on-load change over switch | BI01010001010000000000000515BI0100001355 | 1 | each |
| 244 | 12.54 | od157321/2018_2019 : Supply and fixing MS anchor bolt type iron hook 8mm size for binding service wire. | BI01010001010000000000000515BI0100001356 | 1 | each |
| 245 | 12.55 | od157322/2018_2019 : Supply and fixing 35-63 A, bolted offset tag type fuse link of size A1L in the existing meter board etc as required | BI01010001010000000000000515BI0100001357 | 6 | each |
| 246 | 12.56 | od157323/2018_2019 : Supply and fixing 63 A, 415 V, 2 way neutral link mounted on DMC/ SMC base in the existing meter board etc as required | BI01010001010000000000000515BI0100001358 | 1 | each |
| 247 | 12.57 | od157324/2018_2019 : Supply and fixing 63A fuse holder for BS type fuses in the existing meter board and giving connections etc. | BI01010001010000000000000515BI0100001359 | 3 | each |
| 248 | 12.58 | od157325/2018_2019 : Fabrication, supply & installation of dust and vermin proof, wall mounting, thermoplastic meter box of folowing size suitable for fixing KSEB meter,fuse units, CT etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit. | BI01010001010000000000000515BI0100001360 | 1 | each |
| 249 | 13 | FIRE FIGHTING | BI01010001010000000000000515BI0100001361 | ||
| 250 | 13.01 | od157269/2018_2019 : Charges towards the preparation of necessary plan, scheme and other related papers for submission to Fire force office, Additional Sheet | BI01010001010000000000000515BI0100001362 | 20 | each |
| 251 | 13.02 | od157271/2018_2019 : Charges towards the preparation of necessary plan, scheme and other related papers for submission to Fire force office first A3 Sheet | BI01010001010000000000000515BI0100001363 | 4 | each |
| 252 | 13.03 | od157273/2018_2019 : Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required. | BI01010001010000000000000515BI0100001364 | 6 | each |
| 253 | 13.04 | od157277/2018_2019 : Suply and providing emergency fire escape lighting system consisting 2 nos lamp ,7 AH FMF battary charging unit ,exit sign display etc in MS enclosure | BI01010001010000000000000515BI0100001365 | 4 | each |
| 254 | 13.05 | od157278/2018_2019 : Supply & erection of Fire Escape rout in each floor having size 12\" x 16\" made of 3mm thisk acrylic sheet with glass frame | BI01010001010000000000000515BI0100001366 | 12 | each |
| 255 | 13.06 | od157279/2018_2019 : Supplying and fixing First-Aid Hose Reel with MS construction spray painted in post Office Red drum and brackets, Conforming to IS 884 with upto date amendments, complete with the following as required. (a) 30 m. long 20 mm (nominal internal) dia water hose Thermoplastic (Textile reinforced) Type-2 as per IS: 12585 © Drum and brackets for fixing the equipments on wall. (d) Connections from riser with 25 mm dia stop valve & M.S. Pipe | BI01010001010000000000000515BI0100001367 | 3 | each |
| 256 | 13.07 | od157282/2018_2019 : Supply Providing and installation of Branch pipe of 63 mm dia having Gunmetal/Stainless steel body with hexagonal head of 20mm dia nozzle conforming to IS903 | BI01010001010000000000000515BI0100001368 | 3 | each |
| 257 | 13.08 | od157284/2018_2019 : Supply, providing, laying, testing and commissioning of 100mm dia 'C' class heavy duty MS pipe conforming to IS:1239 I/c fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc fixing the pipe on the wall/ ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint and under ground pipes should be given anti corrosive wrapping complete as required. | BI01010001010000000000000515BI0100001369 | 80 | metre |
| 258 | 13.09 | od157285/2018_2019 : Supply, installation, testing and commissioning of manual call points break glass type with hammer & chain | BI01010001010000000000000515BI0100001370 | 6 | each |
| 259 | 13.1 | od157288/2018_2019 : Supply, installation, testing and commissioning of audio alarm hooters. | BI01010001010000000000000515BI0100001371 | 6 | each |
| 260 | 13.11 | od157290/2018_2019 : Supplying and fixing single headed internal hydrant valve with instantaneous gun metal /Stainless steel coupling of 63 mm dia with cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank cap and chain as required. | BI01010001010000000000000515BI0100001372 | 3 | each |
| 261 | 13.12 | od157291/2018_2019 : Supply,installation,testing and commissioning of Fire Brigade inlet connection with 4 Nos. of 63 mm dia built in Gun metal Non-return valves instantaneous coupling type arranged on 100 mm dia etc. Pipe manifold shall be connected to wet riser main. | BI01010001010000000000000515BI0100001373 | 1 | each |
| 262 | 13.13 | od157292/2018_2019 : Supply providing and installation of 63 mm dia,15 Mtr long rubber lined woven jacketed hose pipe, type- A (Reinforced rubber lined) of IS-636-1988 complete with necessary instantaneous spring lock type coupling at the ends to match with landing valve / hose pipe / branch pipe with gunmetal /Stainless steel male & female couplings (IS:903:1993) | BI01010001010000000000000515BI0100001374 | 3 | each |
| 263 | 13.14 | od157294/2018_2019 : Charges for Fire NOC | BI01010001010000000000000515BI0100001375 | 860 | sqm |
| 264 | 13.15 | od157295/2018_2019 : Supply and proving terrace pump 7.5HP electrically driven pump with Horizontal type multistage centrifugal with bronze impeller stainless steel shaft 900 LPM 20mt Head at 3.5kg/cm2 at terrace level | BI01010001010000000000000515BI0100001376 | 1 | each |
| 265 | 13.16 | od157296/2018_2019 : CABLE:- supply and laying 2x1.5q mm copper conductor PVC insulated and sheathed armoured (FRLS) fire proof cable conforming to relevant IS/Fire protection laws including termination complete as per specification as required. | BI01010001010000000000000515BI0100001377 | 100 | per metre |
| 266 | 13.17 | od157297/2018_2019 : Supplying , fixing, testing and commissioning of 100mm size butterfly valve PN 1.6, bronze/ Gun metal seat duly ISI marked complete with Nuts, Bolts, washers, gaskets, conforming to IS as required. | BI01010001010000000000000515BI0100001378 | 1 | each |
| 267 | 13.18 | od157298/2018_2019 : Supplying, fixing, testing and commissioning of 0-15 Kg/sq cm100mm dia Dial type pressure gauge with isolation cock and pipe at hydrant station as per specification. | BI01010001010000000000000515BI0100001379 | 1 | each |
| 268 | 13.19 | od157299/2018_2019 : HOSE REEL;- Supply, installation, testing and commissioning of Hydraulic hose reel complete with swing type drum,19mm rigid hose having length of 30 meter with stopcock and chrome platednozzle on one end and all the other necessary fixing materials. | BI01010001010000000000000515BI0100001380 | 3 | each |
| 269 | 13.2 | 90.14.1.2 : Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | BI01010001010000000000000515BI0100001381 | 4 | sqm |
| 270 | 13.21 | 90.14.2.1 : Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | BI01010001010000000000000515BI0100001382 | 0.1 | sqm |
| 271 | 13.22 | 90.14.3.1 : Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet | BI01010001010000000000000515BI0100001383 | 2 | metre |
| 272 | 13.23 | 90.14.5 : Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board | BI01010001010000000000000515BI0100001384 | 7 | kg |
| 273 | 13.24 | 90.14.28.2 : S & F Motor starters of the following ratingsThree phase DOL starters for 0.25HP to 7.5 HP motor | BI01010001010000000000000515BI0100001385 | 1 | each |
| 274 | 13.25 | od157303/2018_2019 : Carrying out control wiring for panels with sophisticated control devices such as relays, PLC etc including detailed Engineering, generating the required drawings according to the logical requirement etc with 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 for interconnecting the control devices/ equipments including providing suitable size insulated sockets at the termination points or soldered properly, providing numbering ferrules for the proper identification of the wiring, keeping the wiring firm by suitable tie/ tie mounts/ PVC duct etc as required including conducting trial run after completion of the wiring, making corrections if required and make the system in perfect working condition.4.00 sq mm single run with required sockets. | BI01010001010000000000000515BI0100001386 | 15 | per metre |
| 275 | 13.26 | od157305/2018_2019 : Fabrication, supply & fixing earth bus system with copper strip/ conductor and connecting all accessories as per rule including g tinning the points of contacts etc as required | BI01010001010000000000000515BI0100001387 | 150 | Cum cm |
| 276 | 13.27 | od157306/2018_2019 : S & F switch dis connector fuse unit complete with handle assembly, door inter lock and padlocking arrangement of the following ratings:32A, TP/TPN AC 23 A duty | BI01010001010000000000000515BI0100001388 | 1 | each |
| 277 | 13.28 | od157307/2018_2019 : Supplying and fixing of weather proof hose cabinet fabricated from 2mm thick MS sheet with 4mm thick glazed front glass doors and looking arrangements suitable for accommodate extrnal hydrant with buttrfly valve, 1 No. 15 Mtrs long hose pipe, 1 No. branch pipe, fittings etc.for yard hydrant.The cabinet shall be painted with one coat of primer and 2 coatts of synthetic enamel paint of post office red externally and white internally and shall be suitably mounted on wall/ foot base. | BI01010001010000000000000515BI0100001389 | 3 | each |
| 278 | 14 | SITC of DG set | BI01010001010000000000000515BI0100001390 | ||
| 279 | 14.01 | od157268/2018_2019 : Plastering with cement mortar 1:4, 12mm thick one coat. | BI01010001010000000000000515BI0100001391 | 10 | per sqm |
| 280 | 14.02 | od157272/2018_2019 : Cement concrete 1:4:8 using 20mm (nominal size) broken stone for reinforced concrete work. | BI01010001010000000000000515BI0100001392 | 2 | cum |
| 281 | 14.03 | od157274/2018_2019 : Reinforcement for R.C.C works, bend tied and placed in position (plain grill requiring bend cold) using tor steel | BI01010001010000000000000515BI0100001393 | 20 | per kg |
| 282 | 14.04 | od157275/2018_2019 : Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required. | BI01010001010000000000000515BI0100001394 | 1 | each |
| 283 | 14.05 | od157276/2018_2019 : Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required. | BI01010001010000000000000515BI0100001395 | 2 | each |
| 284 | 14.06 | od157280/2018_2019 : Charges for preparation of scheme additional sheet | BI01010001010000000000000515BI0100001396 | 20 | each |
| 285 | 14.07 | od157281/2018_2019 : Charges for preparation of scheme for approval | BI01010001010000000000000515BI0100001397 | 1 | L.S |
| 286 | 14.08 | od157283/2018_2019 : Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision. | BI01010001010000000000000515BI0100001398 | 1 | each |
| 287 | 14.09 | od157286/2018_2019 : Supply of HSD for full load testing of DG set including conveyance charges. | BI01010001010000000000000515BI0100001399 | 75 | per litre |
| 288 | 14.1 | od157287/2018_2019 : Charges for conducting load test of 20 KVA DG set using water load or electrical load at various step load, full load and 10% over load for minimum 3 hours including hire and labour charges of all required materials. | BI01010001010000000000000515BI0100001400 | 16 | each |
| 289 | 14.11 | od157289/2018_2019 : Supply and providing battery charger suitable for charging battery of DG set (88 AH) consisting of the following.1. Transformer / Rectifier with surge protection device.2. Charging facility for 12V and 24V battery.3. DC Volt Meter.4. DC Ammeter to indicate both charging and discharging current.5. Selector switch for trickle and boost charging.6. Automatic over charge cut off facility. | BI01010001010000000000000515BI0100001401 | 1 | each |
| 290 | 14.12 | 90.12.41.33 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp | BI01010001010000000000000515BI0100001402 | 2 | metre |
| 291 | 14.13 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) | BI01010001010000000000000515BI0100001403 | 2 | set |
| 292 | 14.14 | od157293/2018_2019 : Supply, conveyance, installation, testing and commissioning of 20KVA D.G. set with company made acoustic canopy confirming to C.P.C.B. Cummins/iKirlosker/Leyland Type of Engine - Diesel Engine No. of cylinders - Suitable to develop the required BHP as per manufacturer's standards Method of cooling - Air cooling with radiator Aspiration - Natural Design - Suitable for Generator set application Output - 25.2 BHP at 1500 rpm. Under N.T.P. Condition or equivalent standard of manufacturer Standard Accessories with Diesel Engine Flywheel to suit Coupling Close coupling Air-cleaner Fuel pump Mechanical governor Fuel filter Lubricating oil filter Residential type Exhaust silencer Engine Instrumental Panel Starting switch key or button Lubricating oil pressure gauge Water temperature gauge RPM indicator with Hour meter Battery charging Ammeter Supply control for Engine Battery Control (trip) for low lubricating oil pressure Battery Control (trip) for high water temperature Providing necessary warning systems and other safeties as Contemplated in relevant ISS Fuel pipe Oil resistant flexible hoses of 20mm dia or nearest size M.S pipe as per manufacturer's requirement for fuel line extension with necessary regulator valves Alternator Make - Stamford/KEL/Crompton Type - Self Excited and self regulated Capacity - 20KVA at 0.8 p.f System voltage - 3phase 415V, 50Hz Speed - 1500r.p.m. Voltage regulation - + 2.5% of rated voltage Insulation class - F/H The Alternator should confirm to IS 4722 Fuel tank 100 ltr capacity fuel tank integrated with acoustic enclosure. Battery Required number of suitably rated fully charged battery with leads and terminals as required as per manufacture's requirements Operation manual, service manual, list of spares etc. shall be submitted while the D.G.set is supplied Standard control panel integral with the acoustic enclosure comprising of the following 32A 35KA 4 pole MCCB having adjustable setting Digital multifunction meter with accuracy class 0.5 to read parameters such as KW, KVA, PF, Voltage, Current, Frequency etc. Digital type single function KWH meter with accuracy class 0.5 LED type phase indication lamp for indicating the presence of supply on all phases. Fuse protections shall be provided for the meters and indication lamps. Exhaust Piping shall be vent to the top of the nearest/tallest building. | BI01010001010000000000000515BI0100001404 | 1 | each |
| 293 | 15 | KSEB , EI Charges | BI01010001010000000000000515BI0100001405 | ||
| 294 | 15.01 | od157270/2018_2019 : Nevessary fee towards KSEB , Electrical inspectorate for scheme approval , OYEC , line extension , power allocation etc ( Actual will be reimbursed on production of original documents ) | BI01010001010000000000000515BI0100001406 | 1 | L.S |
AI Tender Summary
Tender Timeline
Sep 29, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 28, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender